Reactivity of Cyclopentadienyl Molybdenum Compounds towards Formic Acid: Structural Characterization of CpMo(PMe 3 )(CO) 2 H, CpMo(PMe 3 ) 2 (CO)H, [CpMo(μ-O)(μ-O 2 CH)] 2 , and [Cp*Mo(μ-O)(μ-O 2 CH)] 2
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Protein phosphatase 2A (PP2A) holoenzymes target broad substrates by recognizing short motifs via regulatory subunits. PP2A methylesterase 1 (PME-1) is a cancer-promoting enzyme and undergoes methylesterase activation upon binding to the PP2A core enzyme. Here, we showed that PME-1 readily demethylates different families of PP2A holoenzymes and blocks substrate recognition in vitro. The high-resolution cryoelectron microscopy structure of a PP2A-B56 holoenzyme–PME-1 complex reveals that PME-1 disordered regions, including a substrate-mimicking motif, tether to the B56 regulatory subunit at remote sites. They occupy the holoenzyme substrate-binding groove and allow large structural shifts in both holoenzyme and PME-1 to enable multipartite contacts at structured cores to activate the methylesterase. B56 interface mutations selectively block PME-1 activity toward PP2A-B56 holoenzymes and affect the methylation of a fraction of total cellular PP2A. The B56 interface mutations allow us to uncover B56-specific PME-1 functions in p53 signaling. Our studies reveal multiple mechanisms of PME-1 in suppressing holoenzyme functions and versatile PME-1 activities derived from coupling substrate-mimicking motifs to dynamic structured cores.
The dinuclear rhenium(II) complex Re 2 Br 4 (PMe 3 ) 4 was prepared from the reduction of [Re 2 Br 8 ] 2– with ( n -Bu 4 N)BH 4 in the presence of PMe 3 in propanol. The complex was characterized by single-crystal X-ray diffraction (SCXRD) and UV–visible spectroscopy. It crystallizes in the monoclinic C2/c space group and is isostructural with its molybdenum and technetium analogues. The Re–Re distance (2.2521(3) Å) is slightly longer than the one in Re 2 Cl 4 (PMe 3 ) 4 (2.247(1) Å). The molecular and electronic structure of Re 2 X 4 (PMe 3 ) 4 (X = Cl, Br) were studied by multiconfigurational quantum chemical methods. The computed ground-state geometry is in excellent agreement with the experimental structure determined by SCXRD. The calculated total bond order (2.75) is consistent with the presence of an electron-rich triple bond and is similar to the one found for Re 2 Cl 4 (PMe 3 ) 4 . The electronic absorption spectrum of Re 2 Br 4 (PMe 3 ) 4 was recorded in benzene and shows a series of low-intensity bands in the range 10 000–26 000 cm –1 . The absorption bands were assigned based on calculations of the excitation energies with the multireference wave functions followed by second-order perturbation theory using the CASSCF/CASPT2 method. As a result, calculations predict that the lowest energy band corresponds to the δ* → σ* transition, while the next higher energy bands were attributed to the δ* → π*, δ → σ*, and δ → π* transitions.
The reaction of NaBEt 4 with Cp*Rh(PMe 3 )PhBr produces Cp*Rh(PMe 3 )PhEt by ethyl transfer. Single crystal X-ray analysis shows a typical piano-stool geometry. This compound reacts photochemically (λ > 320 nm) to give Cp*Rh(PMe 3 )PhH as the major product, plus ethylene. A secondary product was assigned as the square planar complex RhPh(PMe 3 )(η 4 -C 5 Me 5 Et) on the basis of NMR spectroscopy. Finally, the molecule decomposes over several days at ambient temperature, releasing C 5 Me 5 Et.
Not Available
The cyclopentadienyl molybdenum hydride compounds, Cp R Mo(PMe 3 ) 3-x (CO) x H (Cp R = Cp, Cp*; x = 0, 1, 2 or 3), are catalysts for the dehydrogenation of formic acid, with the most active catalysts having the composition Cp R Mo(PMe 3 ) 2 (CO)H. The mechanism of the catalytic cycle is proposed to involve (i) protonation of the molybdenum hydride complex, (ii) elimination of H 2 and coordination of formate, and (iii) decarboxylation of the formate ligand to regenerate the hydride species. NMR spectroscopy indicates that the nature of the resting state depends on the composition of the catalyst. For example, (i) the resting states for the CpMo(CO) 3 H and CpMo(PMe 3 )(CO) 2 H systems are the hydride complexes themselves, (ii) the resting state for the CpMo(PMe 3 ) 3 H system is the protonated species [CpMo(PMe 3 ) 3 H 2 ] + , and (iii) the resting state for the CpMo(PMe 3 ) 2 (CO)H system is the formate complex, CpMo(PMe 3 ) 2 (CO)(κ 1 -O 2 CH), in the presence of a high concentration of formic acid, but CpMo(PMe 3 ) 2 (CO)H when the concentration of acid is low. While CO 2 and H 2 are the principal products of the catalytic reaction induced by Cp R Mo(PMe 3 ) 3-x (CO) x H, methanol and methyl formate are also observed. The generation of methanol is a consequence of disproportionation of formic acid, while methyl formate is a product of subsequent esterification. The disproportionation of formic acid is a manifestation of a transfer hydrogenation reaction, which may also be applied to the reduction of aldehydes and ketones. Thus, CpMo(CO) 3 H also catalyzes the reduction of a variety of ketones and aldehydes to alcohols by formic acid, via a mechanism that involves ionic hydrogenation.
The activation of C–H bonds using first-row transition metals poses a formidable challenge in the development of sustainable catalytic methods. Early/late heterobimetallic complexes provide a Lewis acidic binding site for directing groups, facilitating the activation of C–H bonds at an appended first-row transition metal center. In this work, the reactivity of the ZrIV/Co–I heterobimetallic complexes (THF)(I)Zr(XylNP i Pr 2 ) 2 Co(PR 3 ) (1-PR 3 ; Xyl = 3,5-dimethylphenyl; PR 3 = PMe 3 , PPh 2 Me) toward directed C–H bond activation is explored with pyridine and terminal alkyne derivatives. 1-PMe 3 reacts reversibly with 4-methylpyridine to afford the C–H activated complex (4-Me-C 5 H 4 N)(I)Zr(XylNP i Pr 2 ) 2 (μ-4-Me-C 5 H 3 N)Co(PMe 3 )(H) (3-PMe 3 ). By using the more Lewis basic substrate 4-tert-butylpyridine, (I)Zr(XylNP i Pr 2 )2(μ-4- t Bu-C 5 H 3 N)Co(PMe 3 )(H) (4-PMe 3 ) is formed irreversibly. In addition to pyridine derivatives, 1-PPh 2 Me can activate the C–H bond of terminal alkynes to form (THF)(I)Zr(XylNPiPr 2 ) 2 (μ-R'C≡C)Co(PPh 2 Me)(H) (R' = Ph (5-PPh 2 Me); R' = SiMe 3 (6-PPh 2 Me)).
New RPN H P ligands containing 2,4-xylyl (4mXPN H P) and mesityl (MesPN H P) groups on the phosphorus atoms were synthesized. 4mXPN H P reacts with [(cymene)RuCl 2 ] 2 followed by PMe 3 to produce κ 3 -4mXPN H PRu(PMe 3 )Cl 2 . MesPN H P reacts with [(cymene)RuCl 2 ] 2 to produce monomeric κ 3 -MesPN H PRuCl 2 that reacts with CO forming κ 3 -MesPN H PRu(CO)Cl 2 . Surprisingly, dehydrohalogenation of these complexes results in the activation of ortho methyl groups of the pincer ligands, rather than formation of κ 3 -RPNPRuLCl complexes. This results from transient κ 3 -RPNPRuLCl formation followed by 1,2-addition of an ortho C-H bond across the Ru-amide bond. The transient amide complex of κ 4 -4mXPN H PRu(PMe 3 )Cl was trapped with CO forming κ 3 -4mXPNPRu(PMe 3 )(CO)Cl. In contrast, κ 4 -MesPNHPRu(CO)Cl does not react with ligands to trap the expected amide complex of reverse C-H addition. Instead, CO and PMe 3 displace the chloride ligand forming cationic complexes. In both cases, hemi-lability of the pincer ligand was observed spectroscopically. In conclusion, the new complexes serve as precursors to moderately active catalysts for the acceptorless dehydrogenative coupling of n-butanol.
Here, three new uranium species (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(=S), (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(η 2 -S 2 ), and (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(S=PMe 3 ) were synthesized and fully characterized by a combination of NMR, IR, and UV/vis–NIR spectroscopies, elemental analysis, and cyclic voltammetry. The solid state structures of (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(=S) and (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(η 2 -S 2 ) were also determined. The compound (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(=S) is the first neutral uranium complex with a terminal sulphido ligand, and (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(S=PMe 3 ) is the first uranium compound with a coordinated phosphine sulphide ligand. The phosphine sulphide adduct, (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(S=PMe 3 ), can be synthesized either by reaction of the uranium(IV) complex (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(thf) with S=PMe 3 or by the reaction of the uranium(VI) terminal sulphido complex (C 5 Me 5 ) 2 U(=N-2,6- i Pr 2 -C 6 H 3 )(=S) with PMe 3 .
De-esterification of homogalacturonan (HG) is thought to stiffen pectin gels and primary cell walls by increasing calcium cross-linking between HG chains. Contrary to this idea, recent studies found that HG de-esterification correlated with reduced stiffness of living tissues, measured by surface indentation. The physical basis of such apparent wall softening is unclear, but possibly involves complex biological responses to HG modification. To assess the direct physical consequences of HG de-esterification on wall mechanics without such complications, we treated isolated onion (Allium cepa) epidermal walls with pectin methylesterase (PME) and assessed wall biomechanics with indentation and tensile tests. In nanoindentation assays, PME action softened the wall (reduced the indentation modulus). In tensile force/extension assays, PME increased plasticity, but not elasticity. These softening effects are attributed, at least in part, to increased electrostatic repulsion and swelling of the wall after PME treatment. Despite softening and swelling upon HG de-esterification, PME treatment alone failed to induce cell wall creep. Instead, acid-induced creep, mediated by endogenous α-expansin, was reduced. We conclude that HG de-esterification physically softens the onion wall, yet reduces expansin-mediated wall extensibility.
Pectin, a major component of the primary cell walls of dicot plants, is synthesized in Golgi, secreted into the wall as methylesters and subsequently de-esterified by pectin methylesterase (PME). Pectin remodelling by PMEs is known to be important in regulating cell expansion in plants, but has been poorly studied in cotton. In this study, genome-wide analysis showed that PMEs are a large multi-gene family (81 genes) in diploid cotton (Gossypium raimondii), an expansion over the 66 in Arabidopsis and suggests the evolution of new functions in cotton. Relatively few PME genes are expressed highly in fibres based on EST abundance and the five most abundant in fibres were cloned and sequenced from two cotton species. Their significant sequence differences and their stage-specific expression in fibres within a species suggest subspecialisation during fibre development. We determined the transcript abundance of the five fibre PMEs, total PME enzyme activity, pectin content and extent of de-methylesterification of the pectin in fibre walls of the two cotton species over the first 25–30 days of fibre growth. There was a higher transcript abundance of fibre-PMEs and a higher total PME enzyme activity in G. barbadense (Gb) than in G. hirsutum (Gh) fibres, particularly during late fibre elongation. Total pectin was high, but de-esterified pectin was low during fibre elongation (5–12 dpa) in both Gh and Gb. De-esterified pectin levels rose thereafter when total PME activity increased and this occurred earlier in Gb fibres resulting in a lower degree of esterification in Gb fibres between 17 and 22 dpa. Gb fibres are finer and longer than those of Gh, so differences in pectin remodelling during the transition to wall thickening may be an important factor in influencing final fibre diameter and length, two key quality attributes of cotton fibres.
Electrochemical reactions occurring at the opposite ends of bipolar electrodes (BPEs) are necessarily coupled, enabling electron transfer events at one end to be read out optically, for example, by coupling to fluorogenic reactions at the other end. In order to explore the potential of this technique for studying multiple redox events, arrays of parallel BPE interdigitated electrode arrays (IDEAs) were fabricated and integrated with separate analytical and reporter microfluidic channels, respectively, in a closed BPE configuration. The apparatus was initially evaluated employing Fe(CN) 6 3/4- in the analytical channel coupled to weakly emissive resazurin and strongly emissive resorufin as the fluorogenic redox reporter pair. We then used the device to investigate a proton-coupled electron transfer reaction, hydroquinone (QH 2 ) oxidation, in structures with an integrated pH modulation electrode (PME). A pH-sensitive dye, fluorescein, was co-introduced into the analytical channel to monitor PME modulation of solution pH, and its coupling to QH 2 oxidation, thereby permitting changes in solution pH, and consequently QH 2 oxidation rate, to be monitored directly in the analytical channel and compared to the fluorescence in the reporter channel. Additionally, diffusion of OH - generated at the PME produced a spatial pH profile that was visualized via fluorescein emission, and, because the oxidation of QH 2 at each BPE is strongly dependent on the local pH, via the coupled fluorogenic reaction at the opposite pole of the corresponding BPE digit in the reporter channel. Thus, BPE IDEAs support the coupling of independent redox reactions and the use of fluorescence imaging to explore a diverse set of spatially varying electrochemical phenomena realized in a variety of electrochemical geometries.
Catalysts provide foundational technology for the development of new materials and can enhance the efficiency of routes to known materials. New catalyst technologies offer the possibility of reducing energy and raw material consumption as well as enabling chemical processes with a lower environmental impact. The rising demand and expense of fossil resources has strained national and global economies and has increased the importance of accessing more efficient catalytic processes for the conversion of hydrocarbons to useful products. The goals of the research are to develop and understand single-site homogeneous catalysts for the conversion of readily available hydrocarbons into useful materials. A detailed understanding of these catalytic reactions could lead to the development of catalysts with improved activity, longevity and selectivity. Such transformations could reduce the environmental impact of hydrocarbon functionalization, conserve energy and valuable fossil resources and provide new technologies for the production of liquid fuels. This project is a collaborative effort that incorporates both experimental and computational studies to understand the details of transition metal catalyzed C-H activation and C-C bond forming reactions with olefins. Accomplishments of the current funding period include: (1) We have completed and published studies of C-H activation and catalytic olefin hydroarylation by TpRu{l_brace}P(pyr){sub 3}{r_brace}(NCMe)R (pyr = N-pyrrolyl) complexes. While these systems efficiently initiate stoichiometric benzene C-H activation, catalytic olefin hydroarylation is hindered by inhibition of olefin coordination, which is a result of the steric bulk of the P(pyr){sub 3} ligand. (2) We have extended our studies of catalytic olefin hydroarylation by TpRu(L)(NCMe)Ph systems to L = P(OCH{sub 2}){sub 3}CEt. Thus, we have now completed detailed mechanistic studies of four systems with L = CO, PMe{sub 3}, P(pyr){sub 3} and P(OCH{sub 2}){sub 3}CEt, which has provided a comprehensive understanding of the impact of steric and electronic parameters of 'L' on the catalytic hydroarylation of olefins. (3) We have completed and published a detailed mechanistic study of stoichiometric aromatic C-H activation by TpRu(L)(NCMe)Ph (L = CO or PMe{sub 3}). These efforts have probed the impact of functionality para to the site of C-H activation for benzene substrates and have allowed us to develop a detailed model of the transition state for the C-H activation process. These results have led us to conclude that the C-H bond cleavage occurs by a {sigma}-bond metathesis process in which the C-H transfer is best viewed as an intramolecular proton transfer. (4) We have completed studies of Ru complexes possessing the N-heterocyclic carbene IMes (IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene). One of these systems is a unique four-coordinate Ru(II) complex that catalyzes the oxidative hydrophenylation of ethylene (in low yields) to produce styrene and ethane (utilizing ethylene as the hydrogen acceptor) as well as the hydrogenation of olefins, aldehydes and ketones. These results provide a map for the preparation of catalysts that are selective for oxidative olefin hydroarylation. (5) The ability of TpRu(PMe{sub 3})(NCMe)R systems to activate sp{sup 3} C-H bonds has been demonstrated including extension to subsequent C-C bond forming steps. These results open the door to the development of catalysts for the functionalization of more inert C-H bonds. (6) We have discovered that Pt(II) complexes supported by simple nitrogen-based ligands serve as catalysts for the hydroarylation of olefins. Given the extensive studies of Pt-based catalytic C-H activation, we believe these results will provide an entry point into an array of possible catalysts for hydrocarbon functionalization.
The chemical kinetics of propyl methyl ether (PME), a proposed biofuel, has been studied behind reflected shock waves near 10 atm over a temperature range of 1200 - 1525 K/ Mixtures consisting of 0.1% PME/ 0.6% oxygen and 0.5% PME were used to investigate pressure and CO time-histories during OME oxidation and pyrolysis in argon, respectively. Carbon monoxide mole fractions were measured behind reflected shock waves with a continuous quantum cascade laser centered at 2046.30 wavenumbers using fixed-wavelength direct absorption spectroscopy.
Bis(carbene)borate ligand transfer to the nickel nitrosyl synthon Ni(NO)(PPh 3 ) 2 Br provides the new nickel nitrosyl complex Ph 2 B( t BuIm) 2 Ni(NO)(PPh 3 ). The solid state structure reveals a trigonal pyramidal nickel ion with a very long bond to the apical PPh 3 ligand. The complex reversibly dissociates PPh 3 in solution to afford three-coordinate Ph 2 B( t BuIm) 2 Ni(NO), with NMR data providing evidence for PPh 3 binding at low temperatures. Ligand transfer to Ni(PMe 3 ) 2 Cl 2 provides the square planar complex, Ph 2 B( t BuIm) 2 Ni(PMe 3 )Cl, which shows no evidence for rearranging to the form a homoleptic complex with two bis(carbene)borate ligands. This complex is a suitable synthon for the [Ph 2 B( t BuIm) 2 Ni] + fragment, as demonstrated by the synthesis of the π-allyl complex Ph 2 B( t BuIm) 2 Ni(η 3 -C 7 H 7 ). The π-allyl complex reacts with O 2 to provide benzaldehyde and an unstable complex that is tentatively identified as the nickel(II) hydroxide [Ph 2 B( t BuIm) 2 Ni(μ-OH)] 2 .
Double deprotonation of the salt [Ph 2 B(PMe 3 ) 2 ][OTf] provides access to a bis(ylide)diphenylborate ligand that is readily transferred in situ to iron(II). Depending on the reaction stoichiometry, both the “ate” complex [Ph 2 B(Me 2 PCH 2 ) 2 Fe(μ-Cl) 2 Li(THF) 2 ] and the homoleptic complex [Ph 2 B(Me 2 PCH 2 ) 2 ] 2 Fe can be prepared from FeCl 2 (THF) 1.5 . Further reaction of with FeCl 2 (THF) 1.5 produces the chloride-bridged dimer [Ph 2 B(Me 2 PCH 2 ) 2 Fe(μ-Cl) 2 Fe(CH 2 PMe 2 ) 2 BPh 2 ]. Attempts to reduce or alkylate provide as the only isolable product, likely a consequence of the low steric hindrance of the bis(ylide)diphenylborate ligand. On the other hand, reaction of with the strong field ligand CN t Bu provides the six-coordinate, diamagnetic complex [Ph 2 B(Me 2 PCH 2 ) 2 Fe(CN t Bu) 4 ][Cl]. Here, the electronic structure calculations for the bis(ylide)diphenylborate ligand and homoleptic complex suggest that the C(ylide) atoms are strong σ-donors with little π-bonding character. These initial results suggest the potential for this bis(ylide)diphenylborate ligand in coordination chemistry.
The MSCG/FM (multiscale coarse-graining via force-matching) approach is an efficient supervised machine learning method to develop microscopically informed coarse-grained (CG) models. Here we present a theory based on the principle of maximum entropy (PME) enveloping the existing MSCG/FM approaches. This theory views the MSCG/FM method as a special case of matching the thermodynamic forces from the extended ensemble described by the set of thermodynamic (relevant) system coordinates. This set may include CG coordinates, the stress tensor, applied external fields, and so forth, and may be characterized by nonequilibrium conditions. Following the presentation of the theory, we discuss the consistent matching of both bonded and nonbonded interactions. The proposed PME formulation is used as a starting point to extend the MSCG/FM method to the constant strain ensemble, which together with the explicit matching of the bonded forces is better suited for coarse-graining anisotropic media at a submolecular resolution. The theory is demonstrated by performing the fine coarse-graining of crystalline 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), a well-known insensitive molecular energetic material, which exhibits highly anisotropic mechanical properties.