Search NASA⌕ Search

SEARCH · Search NASA

Results for “PN ranging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Combined GMSK Communications and PN Ranging

A document discusses a method by which GMSK (Gaussian minimum shift keying) modulation and a pseudonoise (PN) ranging signal may be combined. By isolating the in-phase and quadrature components after carrier lock, and extracting their low-pass and band-pass filtered components, there is enough information available to both demodulate data and track the PN signal. The proposed combined GMSK communications and PN ranging is one potential approach to address emerging requirements for simultaneous high data rate communications from and tracking of vehicles in deep space or at the Moon.

Orr, Richard↗
NASA NTRS2019

Telecommand/Telemetry Ranging for Deep-Space Applications

Conventional two-way pseudonoise (PN) ranging relies on measuring the time delay between a PN signal transmitted to the spacecraft, and a corresponding synchronized PN signal transmitted from the spacecraft and received on the ground. Recently, we introduced a two-way ranging method ([1], [2], [3]) which eliminates the need for the downlink PN ranging signal. In this telemetry ranging scheme, the requisite timing measurements are obtained from a databearing downlink telemetry signal. In the present paper, we extend the telemetry ranging concept by also eliminating the uplink PN signal, which is replaced by a data-bearing telecommand signal. We describe the architecture and concept of such a system, and describe the fundamental limitations of tracking the timing of such uplink telecommand signals when tracking loops or demod-remod correlation techniques are employed. An end-to-end performance analysis shows that in typical scenarios, ranging performance comparable to conventional PN ranging is possible.

Hamkins, Jon↗
NASA NTRS2001

Regenerative pseudo-noise ranging for deep space applications

Currently, ranging for deep space missions is performed by turning around the uplink ranging modulation and remodulating it onto the downlink carrier. This method results in about 1.5 MHz of noise also being modulated onto the downlink, severely degrading the received ranging SNR on the ground. This degradation must be compensated for by either increasing the integration time of the received signal, which increases the length of time for the track, or increasing the downlink ranging signal's modulation index, which decreases the power available for the telemetry modulation. A method for the regeneration on the spacecraft of a pseudo noise (PN) ranging signal has been developed. This method allows for an increase of up to 30dB in the received downlink ranging power. The increased power can be used to decrease the measurement uncertainty, reduce the time of the measurement, or increase the power allocated to the downlink telemetry. This system was implemented in the Spacecraft Transponding Modem that was developed by JPL for NASA.

deep space ranging↗
NASA NTRS2000

The NASA Spacecraft Transponding Modem

A new deep space transponder is being developed by the Jet Propulsion Laboratory for NASA. The Spacecraft Transponding Modem (STM) implements the standard transponder functions and the channel service functions that have previously resided in spacecraft Command/Data Subsystems. The STM uses custom ASICs, MMICs, and MCMs to reduce the active device parts count to 70, mass to I kg, and volume to 524 cc. The first STMs will be flown on missions launching in the 2003 time frame. The STM tracks an X-band uplink signal and provides both X-band and Ka-band downlinks, either coherent or non-coherent with the uplink. A NASA standard Command Detector Unit is integrated into the STM, along with a codeblock processor and a hardware command decoder. The decoded command codeblocks are output to the spacecraft command/data subsystem. Virtual Channel 0 (VC-0) (hardware) commands are processed and output as critical controller (CRC) commands. Downlink telemetry is received from the spacecraft data subsystem as telemetry frames. The STM provides the following downlink coding options: the standard CCSDS (7-1/2) convolutional coding, ReedSolomon coding with interleave depths one and five, (15-1/6) convolutional coding, and Turbo coding with rates 1/3 and 1/6. The downlink symbol rates can be linearly ramped to match the G/T curve of the receiving station, providing up to a 1 dB increase in data return. Data rates range from 5 bits per second (bps) to 24 Mbps, with three modulation modes provided: modulated subcarrier (3 different frequencies provided), biphase-L modulated direct on carrier, and Offset QPSK. Also, the capability to generate one of four non-harmonically related telemetry beacon tones is provided, to allow for a simple spacecraft status monitoring scheme for cruise phases of missions. Three ranging modes are provided: standard turn around ranging, regenerative pseudo-noise (PN) ranging, and Differential One-way Ranging (DOR) tones. The regenerative ranging provides the capability of increasing the ground received ranging SNR by up to 30 dB. Two different avionics interfaces to the command/data subsystem's data bus are provided: a MIL STD 1553B bus or an industry standard PCI interface. Digital interfaces provide the capability to control antenna selection (e.g., switching between high gain and low gain antennas) and antenna pointing (for future steered Ka-band antennas).

Berner, Jeff B.↗
NASA NTRS2011

Telemetry-Based Ranging

A telemetry-based ranging scheme was developed in which the downlink ranging signal is eliminated, and the range is computed directly from the downlink telemetry signal. This is the first Deep Space Network (DSN) ranging technology that does not require the spacecraft to transmit a separate ranging signal. By contrast, the evolutionary ranging techniques used over the years by NASA missions, including sequential ranging (transmission of a sequence of sinusoids) and PN-ranging (transmission of a pseudo-noise sequence) whether regenerative (spacecraft acquires, then regenerates and retransmits a noise-free ranging signal) or transparent (spacecraft feeds the noisy demodulated uplink ranging signal into the downlink phase modulator) relied on spacecraft power and bandwidth to transmit an explicit ranging signal. The state of the art in ranging is described in an emerging CCSDS (Consultative Committee for Space Data Systems) standard, in which a pseudo-noise (PN) sequence is transmitted from the ground to the spacecraft, acquired onboard, and the PN sequence is coherently retransmitted back to the ground, where a delay measurement is made between the uplink and downlink signals. In this work, the telemetry signal is aligned with the uplink PN code epoch. The ground station computes the delay between the uplink signal transmission and the received downlink telemetry. Such a computation is feasible because symbol synchronizability is already an integral part of the telemetry design. Under existing technology, the telemetry signal cannot be used for ranging because its arrival-time information is not coherent with any Earth reference signal. By introducing this coherence, and performing joint telemetry detection and arrival-time estimation on the ground, a high-rate telemetry signal can provide all the precision necessary for spacecraft ranging.

Hamkins, Jon↗
NASA NTRS1993

Sequential ranging: How it works

This publication is directed to the users of data from the Sequential Ranging Assembly (SRA), and to others who have a general interest in range measurements. It covers the hardware, the software, and the processes used in acquiring range data; it does not cover analytical aspects such as the theory of modulation, detection, noise spectral density, and other highly technical subjects. In other words, it covers how ranging is done, but not the details of why it works. The publication also includes an appendix that gives a brief discussion of PN ranging, a capability now under development.

Baugh, Harold W.↗
NASA NTRS1998

Predicting lettuce canopy photosynthesis with statistical and neural network models

An artificial neural network (NN) and a statistical regression model were developed to predict canopy photosynthetic rates (Pn) for 'Waldman's Green' leaf lettuce (Latuca sativa L.). All data used to develop and test the models were collected for crop stands grown hydroponically and under controlled-environment conditions. In the NN and regression models, canopy Pn was predicted as a function of three independent variables: shootzone CO2 concentration (600 to 1500 micromoles mol-1), photosynthetic photon flux (PPF) (600 to 1100 micromoles m-2 s-1), and canopy age (10 to 20 days after planting). The models were used to determine the combinations of CO2 and PPF setpoints required each day to maintain maximum canopy Pn. The statistical model (a third-order polynomial) predicted Pn more accurately than the simple NN (a three-layer, fully connected net). Over an 11-day validation period, average percent difference between predicted and actual Pn was 12.3% and 24.6% for the statistical and NN models, respectively. Both models lost considerable accuracy when used to determine relatively long-range Pn predictions (> or = 6 days into the future).

Non-NASA Center↗
DOE OSTI2022

Multi-state Catalysts Modulated by Mechanical Force (Final Report)

The development of more efficient catalytic processes and new approaches to control catalytic activity and selectivity are central to the realization of more selective, atom economic, and energy efficient routes to value added chemicals and polymers. The reactivity and selectivity of a transition metal catalyst is intimately related to the ligand-sphere geometry and, in many cases, the ideal ligand geometry for one step of a catalytic cycle is poorly matched to the ideal ligand geometry for another, resulting in sub-optimal efficiency. Macroscopic mechanical forces are both large, potentially much larger than interatomic forces, and are directional and localized to an extent that differentiates them from other forms of energy input such as heat or light. As such, mechanical force represents a heretofore untapped approach to modulate catalyst geometry, with the potential to reversibly modulate catalyst geometry on the timescale of catalytic turnover or monomer enchainment. This project has addressed the fundamental challenges in material-to-molecule strain coupling associated with the development of a new class of mechanically responsive catalysts (mechanocatalysts) in which active organotransition metal catalysts are strategically embedded in a flexible polymer network such that application of external mechanical force (stretching or deformation) leads to modulation of catalyst geometry, and hence reactivity and selectivity. Our efforts during the tenure of this grant were directed toward the elucidation of force-reactivity relationships of elementary transformations that occur within the first coordination sphere of a transition metal complex employing stiff stilbene photoswitches tethered to a flexible bidentate phosphine ligand derived from MeOBiphep as molecular force probes which provide a range of compressive and extension forces to the coupled transition metal complex depending on the geometry of the stiff stilbene and length of the tethering chains. During the tenure of this grant, we have quantified the rate of C(sp 2 )-C(sp 2 ) reductive elimination from platinum(II) diaryl complexes containing bis(phosphine) force probe ligands as a function of mechanical force; compressive forces decreased the rate of reductive elimination whereas extension forces increased the rate relative to the strain-free MeOBiphep complex with a 3.4-fold change in rate over a ~290 pN range of restoring forces. In a similar manner, we have quantified the rate of oxidative addition of bromobenzene to low-ligated palladium(0) complexes containing force probe ligands as a function of mechanical force; compressive forces increase the rate of oxidative addition, whereas tensile forces decrease the rate with a ~6 fold change in rate across ~340 pN of force applied to the complexes. In both cases, experimental and computational analyses argue strongly against any significant force-induced perturbation of ground state geometry within the first coordination sphere of the reactant complexes. Rather, the force/rate behavior observed for these transformations across these ranges of forces is attributed to the coupling of force to the nuclear motion comprising the reaction coordinates for reductive elimination and oxidative addition. These results together inform the development of catalysts whose activity can be tuned by an external force that is adjusted within a catalytic cycle and suggest opportunities to experimentally map geometry changes associated with reactions in transition metal complexes and potential strategies for force-modulated catalysis.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Force-Modulated C–C Reductive Elimination from Nickel Bis(polyfluorophenyl) Complexes

We have analyzed the rate of C(sp 2 )–C(sp 2 ) reductive elimination from nickel(II) bis(2,4,6-trifluorophenyl) complex-es (P–P)Ni(2,4,6-C 6 H 2 F 3 ) 2 containing either MeOBiPhep (3a) or macrocyclic bisphosphine ligand (3b-3e) as a func-tion of force applied to the biaryl backbone of these ligands through intramolecular tension generated by a molecular force probe. Nickel complexes 3 were isolated in 22-60% yield from reaction of bisphosphine with the bis(tetrahydrofuranyl) complex (THF) 2 Ni(2,4,6-C 6 H 2 F 3 ) 2 followed by chromatography. Thermolysis of complexes 3 in C 6 D 6 at 68 °C leads to first-order decay through > 3 half-lives to form 2,2',4,4',6,6'-hexaflurorobiphenyl as the exclusive fluorine-containing product in ≥93% yield. Whereas compressive forces up to –65 pN have no significant effect on the rate of reductive elimination, extension forces increase the rate of reductive elimination by a factor of three over a ~230 pN range of restoring forces relative to the strain-free MeOBiphep complex. Furthermore, the rate response of reductive elimination from nickel(II) bis(trifluorophenyl) complexes as a function of extension force is similar to the previously reported 2.8-fold increase in the rate of reductive elimination from platinum diaryl complexes (P–P)Pt(4-C 6 H 4 NMe 2 ) 2 over the same range of forces

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2008

NASA Tech Briefs, November 2008

Topics covered include: Digital Phase Meter for a Laser Heterodyne Interferometer; Vision System Measures Motions of Robot and External Objects; Advanced Precipitation Radar Antenna to Measure Rainfall From Space; Wide-Band Radar for Measuring Thickness of Sea Ice; Vertical Isolation for Photodiodes in CMOS Imagers; Wide-Band Microwave Receivers Using Photonic Processing; L-Band Transmit/Receive Module for Phase-Stable Array Antennas; Microwave Power Combiner/Switch Utilizing a Faraday Rotator; Compact Low-Loss Planar Magic-T; Using Pipelined XNOR Logic to Reduce SEU Risks in State Machines; Quasi-Optical Transmission Line for 94-GHz Radar; Next Generation Flight Controller Trainer System; Converting from DDOR SASF to APF; Converting from CVF to AAF; Documenting AUTOGEN and APGEN Model Files; Sequence History Update Tool; Extraction and Analysis of Display Data; MRO DKF Post-Processing Tool; Rig Diagnostic Tools; MRO Sequence Checking Tool; Science Activity Planner for the MER Mission; UAVSAR Flight-Planning System; Templates for Deposition of Microscopic Pointed Structures; Adjustable Membrane Mirrors Incorporating G-Elastomers; Hall-Effect Thruster Utilizing Bismuth as Propellant; High-Temperature Crystal-Growth Cartridge Tubes Made by VPS; Quench Crucibles Reinforced with Metal; Deep-Sea Hydrothermal-Vent Sampler; Mars Rocket Propulsion System; Two-Stage Passive Vibration Isolator; Improved Thermal Design of a Compression Mold; Enhanced Pseudo-Waypoint Guidance for Spacecraft Maneuvers; Altimetry Using GPS-Reflection/Occultation Interferometry; Thermally Driven Josephson Effect; Perturbation Effects on a Supercritical C7H16/N2 Mixing Layer; Gold Nanoparticle Labels Amplify Ellipsometric Signals; Phase Matching of Diverse Modes in a WGM Resonator; WGM Resonators for Terahertz-to-Optical Frequency Conversion; Determining Concentration of Nanoparticles from Ellipsometry; Microwave-to-Optical Conversion in WGM Resonators; Four-Pass Coupler for Laser-Diode-Pumped Solid-State Laser; Low-Resolution Raman-Spectroscopy Combustion Thermometry; Temperature Sensors Based on WGM Optical Resonators; Varying the Divergence of Multiple Parallel Laser Beams; Efficient Algorithm for Rectangular Spiral Search; Algorithm-Based Fault Tolerance Integrated with Replication; Targeting and Localization for Mars Rover Operations; Terrain-Adaptive Navigation Architecture; Self-Adjusting Hash Tables for Embedded Flight Applications; Schema for Spacecraft-Command Dictionary; Combined GMSK Communications and PN Ranging; System-Level Integration of Mass Memory; Network-Attached Solid-State Recorder Architecture; Method of Cross-Linking Aerogels Using a One-Pot Reaction Scheme; An Efficient Reachability Analysis Algorithm.

Source record↗
NASA NTRS2010

Multiple Access Schemes for Lunar Missions

Two years ago, the NASA Coding, Modulation, and Link Protocol (CMLP) study was completed. The study, led by the authors of this paper, recommended codes, modulation schemes, and desired attributes of link protocols for all space communication links in NASA's future space architecture. Portions of the NASA CMLP team were reassembled to resolve one open issue: the use of multiple access (MA) communication from the lunar surface. The CMLP-MA team analyzed and simulated two candidate multiple access schemes that were identified in the original CMLP study: Code Division MA (CDMA) and Frequency Division MA (FDMA) based on a bandwidth-efficient Continuous Phase Modulation (CPM) with a superimposed Pseudo-Noise (PN) ranging signal (CPM/PN). This paper summarizes the results of the analysis and simulation of the CMLP-MA study and describes the final recommendations.

Deutsch, Leslie↗
NASA NTRS1977

PN ranging/telemetry transmission

System can transmit range-indicating pseudonoise (PN) codes and simultaneously transmit auxiliary information as binary data at a rate at least on order of pseudonoise chipping rate. PN code is modulated by data stream with relatively low bit rate. Data stream with high bit rate can be transmitted in same frequency band as PN ranging code.

Deerkoski, L. F.↗
DOE OSTI2021

12 C(e,e'pN) measurements of short range correlations in the tensor-to-scalar interaction transition region

High-momentum configurations of nucleon pairs at short-distance are probed using measurements of the $^{12}$C$(e,e'p)$ and $^{12}$C$(e,e'pN)$ reactions (where $N$ is either $n$ or $p$), at high-$Q^2$ and $x_B>1.1$. The data span a missing-momentum range of 300--1000 MeV/c and are predominantly sensitive to the transition region of the strong nuclear interaction from a Tensor to Scalar interaction. The data are well reproduced by theoretical calculations using the Generalized Contact Formalism with both chiral and phenomenological nucleon-nucleon ($NN$) interaction models. This agreement suggests that the measured high missing-momentum protons up to $1000$ MeV/c predominantly belong to short-ranged correlated (SRC) pairs. The measured $^{12}$C$(e,e'pN)$ / $^{12}$C$(e,e'p)$ and $^{12}$C$(e,e'pp)$ / $^{12}$C$(e,e'pn)$ cross-section ratios are consistent with a decrease in the fraction of proton-neutron SRC pairs and increase in the fraction of proton-proton SRC pairs with increasing missing momentum. This confirms the transition from an isospin-dependent tensor $NN$ interaction at $\sim 400$ MeV/c to an isospin-independent scalar interaction at high-momentum around $\sim 800$ MeV/c as predicted by theoretical calculation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗