Search NASA⌕ Search

SEARCH · Search NASA

Results for “POLYESTER RESIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Development of a Cure Model for Unsaturated Polyester Resin Systems Based on Processing Conditions

Unsaturated polyester resin (UPR) systems are extensively used in composite materials for applications in the transportation, marine, and infrastructure sectors. There are continually evolving formulations of UPRs that need to be evaluated and optimized for processing. Differential Scanning Calorimetry (DSC) provides valuable insight into the non-isothermal and isothermal behavior of UPRs within a prescribed temperature range. In the present work, non-isothermal DSC tests were carried out between temperatures of 0.0 °C and 250 °C, through different heating and cooling ramp rates. The isothermal DSC tests were carried out between 0.0 and 170 °C. The instantaneous rate of cure of the tested temperatures were measured. The application of an autocatalytic model in a calculator was used to simulate curing behaviors under different processing conditions. As the temperature increased from 10 °C up to 170 °C, the rate of cure reduced, and the heat of reaction increased. The simulated cure behavior from the DSC data showed that the degree of cure (α) maximum value of 71.25% was achieved at the highest heating temperature of 85 °C. For the low heating temperature, i.e., 5 °C, the maximum degree of cure (α) did not exceed 12% because there was not enough heat to activate the catalyst to crosslink further.

Polymer Science↗
DOE OSTI2019

Fabrication of diatomite‐based microencapsulated flame retardant and its improved fire safety of unsaturated polyester resin

To achive excellent fire resistance, new microcapsule flame retardants (DMCAD and DMPPD) were prepared using 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide combined with melamine cyanurate or melamine polyphosphate as the shell material and diatomite as the core material. The successful assembly of DMCAD and DMPPD was detailed characterized by Fourier transform infrared (FT‐IR) spectra, X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Meanwhile, the flame retardancy and thermal stability of the unsaturated polyester resin (UPR)/DMCAD and UPR/DMPPD composites were also studied. The addition of DMCAD and DMPPD effectively improves the flame retardance properties of UPR, and the effect of DMPPD was better. The limiting oxygen index (LOI) of UPR/DMPPD‐3 increased by 11.6% when compared with that of UPR, and the sample achieved V‐0 rating. Moreover, the peak heat release rate (pHRR) and the total heat release (THR) rate of UPR/DMPPD‐3 were reduced by 67% and 26%, respectively. Under nitrogen condition and air condition, UPR/DMPPD showed better thermal stability and char‐forming ability from the thermogravimetric (TG) results. Residual char of the UPR composites was systematically analyzed with SEM and XPS. Finally, the flame retardant mechanism of DMPPD was proposed.

Chen, Gang↗
DOE OSTI2022

On the Mechanism of the Steady-State Gamma Radiolysis-Induced Scissions of the Phenyl-Vinyl Polyester-Based Resins

The major societal problem of polymeric waste necessitates new approaches to break down especially challenging discarded waste streams. Gamma radiation was utilized in conjunction with varying solvent environments in an attempt to discern the efficacy of radiolysis as a tool for the deliberate degradation of model network polyesters. Our EPR results demonstrated that gamma radiolysis of neat resin and in the presence of four widely used solvents induces glycosidic scissions on the backbone of the polyester chains. EPR results clearly show the formation of alkoxy radicals and C-centered radicals as primary intermediate radiolytic products. Despite the protective role of the phenyl groups on the backbone of the radiation-induced polyester chains, the radiolytic-glycosidic scissions predominate. Among the following three solvents used in this study (water, isopropyl alcohol, and dichloromethane), the highest radiolytic yield of glycosidic scission was achieved using water. The •OH radicals produced in the radiolysis of phenyl unsaturated polyester aqueous suspensions very rapidly abstract H atoms from the methylene group, which is followed by a very rapid glycosidic scission. The lowest glycosidic yield was found in the dichloromethane solutions of these polyester resins due to scavenging by the fast electron capture reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Water-thinnable polymers for durable coatings for different materials

The methods of obtaining water-thinnable polymers - water-thinnable unsaturated polyester resins (WTUPR) - by polycondensation were elaborate and optimized. As hydrophilic monomers different types of sulfonate monomers were used. The monomers, with sulfonate groups and other reactive groups, were obtained by sulfonation of organic compounds with satisfactory yield. All products were analyzed by {sup 1}H NMR and {sup 13}C NMR spectra. WTUPR were used as polymeric binders for coatings applications. Coatings with relatively high pendulum hardness, good properties and durability, useful for practical applications, were obtained. Typical existing equipment for the production of unsaturated polyester resins can be applied for the industrial preparation of WTUPR.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Influence of additional coupling agent on the mechanical properties of polyester–agave cantala roxb based composites

The mechanical and morphological properties of the unsaturated polyester resins (UPRs)-agave cantala roxb based composite are investigated in this paper. The cantala fiber woven in 3D angle interlock was utilized as the composite reinforcement. Surface grafting of the cantala fiber through chemical treatment was performed by introducing silane coupling agent to improving the compatibility with the polymer matrix. The fabrication of the composite specimens was conducted using vacuum bagging technique. The effect of additional coupling agent to the morphological appearance of surface fracture was observed using scanning electron microscopy. Meanwhile, the influence of additional silane to the mechanical properties was examined using tensile, bending and impact test. The photograph of surface fracture on the treated specimens showed the residual matrix left on the fibers in which the phenomenon was not found in the untreated specimens. Based on mechanical tests, the treated specimens were successfully increased their mechanical properties by 55%, 9.67%, and 92.4% for tensile strength, flexural strength, and impact strength, respectively, at 1.5% silane coupling agent.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Renewable unsaturated polyesters from muconic acid

cis,cis -Muconic acid is an unsaturated dicarboxylic acid that can be produced in high yields via biological conversion of sugars and lignin-derived aromatic compounds. Muconic acid is often targeted as an intermediate to direct replacement monomers such as adipic or terephthalic acid. However, the alkene groups in muconic acid provide incentive for its direct use in polymers, for example, in the synthesis of unsaturated polyester resins. Here, biologically derived muconic acid is incorporated into polyesters via condensation polymerization using the homologous series of poly(ethylene succinate), poly(propylene succinate), poly(butylene succinate), and poly(hexylene succinate). Additionally, dimethyl cis,cis -muconate is synthesized and subsequently incorporated into poly(butylene succinate). NMR measurements demonstrate that alkene bonds are present in the polymer backbones. In all cases, the glass transition temperatures are increased whereas the melting and degradation temperatures are decreased. In the case of poly(butylene succinate), utilization of neat muconic acid yields substoichiometric incorporation consistent with a tapered copolymer structure, whereas the muconate diester exhibits stoichiometric incorporation and a random copolymer structure based on thermal and mechanical properties. Prototypical fiberglass panels were produced by infusing a mixture of low molecular weight poly(butylene succinate-co-muconate) and styrene into a woven glass mat and thermally initiating polymerization resulting in thermoset composites with shear moduli in excess of 30 GPa, a value typical of commercial composites. The increased glass transition temperatures with increasing mucconic incorporation leads to improved composites properties. We find that the molecular tunability of poly(butylene succinate-co-muconate) as a tapered or random copolymer enables the tunability of composite properties. Altogether, this study demonstrates the utility of muconic acid as a monomer suitable for direct use in commercial composites.

09 BIOMASS FUELS↗
DOE OSTI2019

Synthesis and Performance Evaluation of Unsaturated Polyester Blends of Resins and Its Application on Non-woven/Fabric Jute Fibers Reinforced Composites

The present study focuses on the generation of eco-friendly value added product by utilizing bio-based material as reinforced and matrix phase. Processing of soy and alkyd resin as matrix was carried out by utilization of soy flour and Ricinodendron heudelotii oil, followed essential modification in few inferior properties of soy flour resin by blending with alkyd resin. Separate sets of resin were prepared by maintaining 0%, 5% and 10% of alkyd resin in 100 g of soy flour resin respectively in each set to attain a comparative study on performance of prepared sets of resin blend. Subsequently, performance evaluation of polyester blends was evaluated by processing with non-woven/fabric jute fibers reinforced composites. The blend of R. heudelotii oil based alkyd and soy-flour resin in processing of composites was the noval approach of the study. The resins blend were characterized by FT–IR, viscosity and zeta potential measurements while thermo-mechanical analyses, water absorbancy and surface analyses were performed in composites. Significant increases noticed in the viscosity of blend, the blend containing 10% alkyd resin is two times more viscous compared to soy-flour resin. Furthermore, improvement in properties including water absorption, thermo-mechanical properties and better fiber-matrix interfacial adhesion of the composite could be observed. Higher glass transition temperature T{sub g} value i.e. 126.8 °C obtained for composites with 10% blend as matrix might emphasizes on increase of the degree of cross linking provided by the α-eleostearic fatty acid chain moiety. The enhancements in properties indicate extending opportunities for fiber-reinforced composites in several industries including building material, furniture, aerospace, nano etc.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterization of the Emissions and Crystalline Silica Content of Airborne Dust Generated from Grinding Natural and Engineered Stones

Abstract In this study, we systematically characterized the airborne dust generated from grinding engineered and natural stone products using a laboratory testing system designed and operated to collect representative respirable dust samples. Four stone samples tested included two engineered stones consisting of crystalline silica in a polyester resin matrix (formulations differed with Stones A having up to 90wt% crystalline silica and Stone B up to 50wt% crystalline silica), an engineered stone consisting of recycled glass in a cement matrix (Stone C), and a granite. Aerosol samples were collected by respirable dust samplers, total dust samplers, and a Micro-Orifice Uniform Deposit Impactor. Aerosol samples were analyzed by gravimetric analysis and x-ray diffraction to determine dust generation rates, crystalline silica generation rates, and crystalline silica content. Additionally, bulk dust settled on the floor of the testing system was analyzed for crystalline silica content. Real-time particle size distributions were measured using an Aerodynamic Particle Sizer. All stone types generated similar trimodal lognormal number-weighted particle size distributions during grinding with the most prominent mode at an aerodynamic diameter of about 2.0-2.3 μm, suggesting dust formation from grinding different stones is similar. Bulk dust from Stone C contained no crystalline silica. Bulk dust from Stone A, Stone B, and granite contained 60, 23, and 30wt% crystalline silica, respectively. In Stones A and B, the cristobalite form of crystalline silica was more plentiful than the quartz form. Only the quartz form was detected in granite. The bulk dust, respirable dust, and total dust for each stone had comparable amounts of crystalline silica, suggesting that crystalline silica content in the bulk dust could be representative of that in respirable dust generated during grinding. Granite generated more dust per unit volume of material removed than the engineered stones, which all had similar normalized dust generation rates. Stone A had the highest normalized generation rates of crystalline silica, followed by granite, Stone B, and Stone C (no crystalline silica), which likely leads to the same trend of respirable crystalline silica (RCS) exposure when working with these different stones. Manufacturing and adoption of engineered stone products with formulations such as Stone B or Stone C could potentially lower or eliminate RCS exposure risks. Combining all the effects of dust generation rate, size-dependent silica content, and respirable fraction, the highest normalized generation rate of RCS consistently occurs at 3.2-5.6 µm for all the stones containing crystalline silica. Therefore, removing particles in this size range near the generation sources should be prioritized when developing engineering control measures.

Public, Environmental & Occupational Health↗
DOE OSTI2014

Dosimetry in Thermal Neutron Irradiation Facility at BMRR

Radiation dosimetry for Neutron Capture Therapy (NCT) has been performed since 1959 at Thermal Neutron Irradiation Facility (TNIF) of the three-megawatt light-water cooled Brookhaven Medical Research Reactor (BMRR). In the early 1990s when more effective drug carriers were developed for NCT, in which the eye melanoma and brain tumors in rats were irradiated in situ, extensive clinical trials of small animals began using a focused thermal neutron beam. To improve the dosimetry at irradiation facility, a series of innovative designs and major modifications made to enhance the beam intensity and to ease the experimental sampling at BMRR were performed; including (1) in-core fuel addition to increase source strength and balance flux of neutrons towards two ports, (2) out of core moderator remodeling, done by replacing thicker D 2 O tanks at graphite-shutter interfacial areas, to expedite neutron thermalization, (3) beam shutter upgrade to reduce strayed neutrons and gamma dose, (4) beam collimator redesign to optimize the beam flux versus dose for animal treatment, (5) beam port shielding installation around the shutter opening area (lithium-6 enriched polyester-resin in boxes, attached with polyethylene plates) to reduce prompt gamma and fast neutron doses, (6) sample holder repositioning to optimize angle versus distance for a single organ or whole body irradiation, and (7) holder wall buildup with neutron reflector materials to increase dose and dose rate from scattered thermal neutrons. During the facility upgrade, reactor dosimetry was conducted using thermoluminescent dosimeters TLD for gamma dose estimate, using ion chambers to confirm fast neutron and gamma dose rate, and by the activation of gold-foils with and without cadmium-covers, for fast and thermal neutron flux determination. Based on the combined effect from the size and depth of tumor cells and the location and geometry of dosimeters, the measured flux from cadmium-difference method was 4 - 7 % lower than the statistical mean derived from the Monte-Carlo modeling (5% uncertainty). The dose rate measured by ion chambers was 6 - 10 % lower than the output tallies (7% uncertainty). The detailed dosimetry that was performed at the TNIF for the NCT will be described.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Converting Poly(ethylene terephthalate) to Rigid Thermosets: Performance and Recycling Considerations

Poly(ethylene terephthalate) (PET) is one of today's most ubiquitous plastics finding predominant uses in textiles and food applications. Due to its prolific implementation, PET already possesses a robust mechanical recycling infrastructure; however, current requirements for mechanical recycling still leads to an underutilization of PET. Thus, to keep carbon in the economy and further encourage decarbonization efforts it is paramount to find other applications for PET. In the present work, PET is converted to thermoset applications, specifically those relevant to fiber reinforced plastics. In one case, bioderived monomers are utilized to convert glycolyzed PET into unsaturated polyesters resins which can possess better thermomechanical performance than their petrochemical counterpart while also emitting less GHG emissions in their manufacture. In the second case, the constituent monomers from PET are converted into epoxies and reacted with either amines or anhydrides to form thermoset networks. When anhydrides are implemented alongside carboxylate-based epoxies, 100% monomer recyclability is obtainable. Meanwhile, when amines are used, performance of the materials can be enhanced at the sacrifice of some recyclability. Overall, this work demonstrates the potential to further incentivize the reclamation of materials through multiple second life applications in pursuance of maintaining carbon in today's material economy.

BIOMASS FUELS,ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Strong Graphene 3D Assemblies with High Elastic Recovery and Hardness

The rational design and construction of 3D graphene assemblies is a crucial step to extend the graphene properties for practical applications. In this work, a novel interfacially reactive self-assembling process is reported to prepare well-organized 3D honeycomb-like graphene assemblies with unique polygonal nanopores interconnected by silicon-oxygen chemical bonds. The newly developed silicate-bridged graphene assembly (SGA) exhibits an exceptionally high hardness of 13.09 GPa, outperforming all existing 3D graphene materials, while maintains high Young’s modulus (162.96 GPa), elastic recovery (75.27%), and superb thermal stability (600 °C in air). The observed unusual merits are resulted from unique pore structure combining the mechanical stability of the trihedral-nanopore structure and the deformability of the other polygonal nanopores. As a filling material, a merely 0.05% (w/w) addition of SGA could double the impact resistance of unsaturated resins (e.g., polyester). While SGA is attractive for various applications, including body armors, wearable electronics, space elevators, and multifunctional reinforcement fibers for automobiles, and aerospace vehicles, the novel liquid sodium-water interfacial reactive self-assembling developed in this study could open avenues for further development of various well-defined 3D assemblies from graphene and many other materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

On electron beam-induced degradation of vinyl ester thermosets

We have demonstrated that electron beam radiolysis induces scissions of the C-O-C bonds along the backbone of the chains of unsaturated polyester thermosets of different compositions based on dicyclopentadiene, isophthalic acid, epoxy vinyl ester, and terephthalic acid. The radiolysis is imminent irrespective of the degree of crosslinking in the thermosets both in neat resins and in the presence of solvents. Electron Paramagnetic Resonance (EPR) results show the formation of the alkoxyl radicals and C-centered radicals as the primary intermediate products of the C-O-C scissions. While the alkoxyl radicals of these resins exhibit very good stability even six months after the irradiation, the C-centered radicals decay very rapidly via their reactions with oxygen that is available either as adsorbed in the resins, dissolved in solvents or from the environment. The radiolytically produced •OH radicals in the unsaturated-ester aqueous solutions play a major role in inducing scissions on the backbone of the polymer chains. The solvated electrons (e s ) from organic solvents, such as dimethyl sulfoxide and isopropyl alcohol, also induce direct scission of the C-O-C bonds, giving rise to the formation of alkoxyl radicals and C-centered radicals. However, a considerable fraction of es is scavenged by the dissolved O 2 to produce O 2 - . Despite the radiation-induced scissions, irradiation of the resins at a dose level of 1000 kGy results in an increase of the glass transition temperature, Tg. This is due to the simultaneous radiation-induced polymerization of the vinyl monomers, toluene, and styrene that are present in the resins. The increase in Tg is observed in all the resins except for the terephthalic polyester resin in aqueous solution, in which the absence of these monomers results in Tg decreasing sharply with irradiation. This work demonstrates that ionizing radiation triggers continuous free radical-chain reactions that lead to the formation of recyclable oligomers.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Infusible Thermoplastic Composites for Wind Turbine Blade Manufacturing: Fatigue Life of Thermoplastic Laminates under Ambient and Low-Temperature Conditions

Traditionally, thermoset resins such as polyesters (PE) and epoxies are used as the polymer matrix for construction of wind turbine blades. However, concern about their end-of-life treatment garners interest to use thermoplastics for increased recyclability. However, the high viscosity of molten thermoplastics inhibits their use in manufacturing wind turbine blades with injection or compression molding. A recently developed, infusible, reactive thermoplastic resin overcomes this technological barrier. Toward verifying that this recyclable resin is suitable for use in wind turbine blades, a dataset of R?=?0.1 and R?=?10 fatigue data for glass fiber-reinforced acrylic composites is provided and equal fatigue life to industry standard epoxy and unsaturated PE resin systems is demonstrated. Specifically, R?=?0.1 fatigue data for acrylic composites at room temperature and -30?degrees C for verification of low-temperature performance are tabulated. To elucidate failure mechanisms, in situ mechanical testing with X-ray computed tomography demonstrates that damage accumulation occurs by crack propagation along the fiber-matrix interface under cyclic loading. Infrared (IR) thermography predicts failure points in composites specimens with porosity defects introduced from nonideal manufacturing processes. Furthermore, these manufacturing defects are shown to compromise the fatigue life of the acrylic laminates by an order of magnitude.

effect of defects↗
DOE OSTI2020

Green chemistry design in polymers derived from lignin: review and perspective

The use of lignin for material and chemical applications has gained interest in recent times due to the environmental focus on using biomass for renewable materials as well as the motivation to valorize lignin as part of an integrated biorefinery. While a wealth of publications can be found for lignin-derived materials, and several reviews can be found on the topic, there are no reviews that outline and critically assess the sustainability of these protocols based on the criterion of the 12 Principles of Green Chemistry. This review assesses the literature for lignin- derived polymers over the past 20 years and highlights attempts to use biobased accompanying reagents, green solvents or solvent-less protocols, reports that replace traditionally toxic precursors (e.g. diisocyanates for polyurethanes), use mild conditions, valorize additional waste streams and prepare materials particularly biodegradable or recyclable. Here, the following work is a comprehensive and critical assessment of the green and sustainable nature of the state-of-the art of lignin-derived polymers (polyurethane, polyester, epoxy, phenolic resin, and others) utilizing actual biomass in the synthetic protocol. Each section of this review highlights and assesses published protocols that use a particularly green approach in one or more steps of the synthetic sequence. While many reports still contain traditional petroleum-derived and toxic methods along with more sustainable methods, the outline of all such green methods is able to create a landscape amidst lignin-derived polymer synthesis that points the way toward safer and more environmentally friendly materials.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Innovative and Recyclable Thermoplastic Wind Turbine Blades

Currently, nearly all utility-scale wind turbine blades are manufactured using traditional thermoset resin systems such as epoxy, polyester, or vinyl ester. Decommissioned thermoset blades cannot easily or economically be recycled at the end of life, with the vast majority of them ending up in landfills. Researchers at the National Renewable Energy Laboratory (NREL) are working to change that.

17 WIND ENERGY↗