Search NASA⌕ Search

SEARCH · Search NASA

Results for “POLYMERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Improving Brush Polymer Infrared One-Dimensional Photonic Crystals via Linear Polymer Additives

Brush block copolymers (BBCPs) enable the rapid fabrication of self-assembled one-dimensional photonic crystals with photonic band gaps that are tunable in the UV-vis-IR, where the peak wavelength of reflection scales with the molecular weight of the BBCPs. Due to the difficulty in synthesizing very large BBCPs, the fidelity of the assembled lamellar nanostructures drastically erodes as the domains become large enough to reflect IR light, severely limiting their performance as optical filters. To overcome this challenge, short linear homopolymers are used to swell the arrays to ~180% of the initial domain spacing, allowing for photonic band gaps up to~1410 nm without significant opacity in the visible, demonstrating improved ordering of the arrays. Additionally, blending BBCPs with random copolymers enables functional groups to be incorporated into the BBCP array without attaching them directly to the BBCPs. The addition of short linear polymers to the BBCP arrays thus offers a facile means of improving the self-assembly and optical properties of these materials, as well as adding a route to achieving films with greater functionality and tailorability, without the need to develop or optimize the processing conditions for each new brush polymer synthesized.

Macfarlane, Robert J.↗

High-Performance Polymer Solar Cells Based on a Wide-Bandgap Polymer Containing Pyrrolo[3,4- f ]benzotriazole-5,7-dione with a Power Conversion Efficiency of 8.63%

A novel donor–acceptor type conjugated polymer based on a building block of 4,8-di(thien-2-yl)-6-octyl-2-octyl-5H-pyrrolo[3,4-f]benzotriazole-5,7(6H)-dione (TZBI) as the acceptor unit and 4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)­benzo­[1,2-b:4,5-b']dithiophene as the donor unit, named as PTZBIBDT, is developed and used as an electron-donating material in bulk-heterojunction polymer solar cells. The resulting copolymer exhibits a wide bandgap of 1.81 eV along with relatively deep highest occupied molecular orbital energy level of -5.34 eV. Based on the optimized processing conditions, including thermal annealing, and the use of a water/alcohol cathode interlayer, the single-junction polymer solar cell based on PTZBIBDT:PC71BM ([6,6]-phenyl-C71-butyric acid methyl ester) blend film affords a power conversion efficiency of 8.63% with an open-circuit voltage of 0.87 V, a short circuit current of 13.50 mA cm -2 , and a fill factor of 73.95%, which is among the highest values reported for wide-bandgap polymers-based single-junction organic solar cells. The morphology studies on the PTZBIBDT:PC71BM blend film indicate that a fibrillar network can be formed and the extent of phase separation can be mani­pulated by thermal annealing. These results indicate that the TZBI unit is a very promising building block for the synthesis of wide-bandgap polymers for high-performance single-junction and tandem (or multijunction) organic solar cells.

Lan, Liuyuan↗

Joining Techniques for Novel Metal Polymer Hybrid Heat Exchangers

In the United States, over 50% of the unrecovered energy from industrial processes is in the form of low-grade heat (< 220°C). Materials and maintenance costs of common heat exchangers are typically too high to justify their usage. Polymers, though more affordable, are usually unsuitable for HX applications due to their low thermal conductivity (~0.2 W/mK). Here, we show that metal-polymer hybrids may be attractive from both performance and cost perspectives. The use of polymers further increases the resistance to corrosion by sulfuric and carbonic acids often present in flue gases. An ongoing work explores different configurations of layered polyimide-copper macroscale hybrids for heat exchanger applications using numerical simulations. This paper explores a manufacturing pathway for producing such layered hybrid tubes that involves directly rolling and bonding tapes made of polymer and copper foil into tubes. A critical problem in the fabrication process is the bonding of metal and polymers. We explore approaches involving adhesives (epoxy, acrylic and silicone) for metal/polymer interfaces and direct welding (ultrasonic) for metal/metal interfaces that can be integrated into the manufacturing process. We report characterizations of the thermomechanical properties of these joining processes. This work paves the way for realizing cost-effective manufacturing of heat exchangers for low grade waste heat recovery.

Kuntumalla, Gowtham↗

Multi-scale entropic depletion phenomena in polymer liquids

We apply numerical polymer integral equation theory to study the entropic depletion problem for hard spheres dissolved in flexible chain polymer melts and concentrated solutions over an exceptionally wide range of polymer radius of gyration to particle diameter ratios (R{sub g}/D), particle-monomer diameter ratios (D/d), and chain lengths (N) including the monomer and oligomer regimes. Calculations are performed based on a calibration of the effective melt packing fraction that reproduces the isobaric dimensionless isothermal compressibility of real polymer liquids. Three regimes of the polymer-mediated interparticle potential of mean force (PMF) are identified and analyzed in depth. (i) The magnitude of the contact attraction that dominates thermodynamic stability scales linearly with D/d and exhibits a monotonic and nonperturbative logarithmic increase with N ultimately saturating in the long chain limit. (ii) A close to contact repulsive barrier emerges that grows linearly with D/d and can attain values far in excess of thermal energy for experimentally relevant particle sizes and chain lengths. This raises the possibility of kinetic stabilization of particles in nanocomposites. The barrier grows initially logarithmically with N, attains a maximum when 2R{sub g} ∼ D/2, and then decreases towards its asymptotic long chain limit as 2R{sub g} ≫ D. (iii) A long range (of order R{sub g}) repulsive, exponentially decaying component of the depletion potential emerges when polymer coils are smaller than, or of order, the nanoparticle diameter. Its amplitude is effectively constant for 2R{sub g} ≤ D. As the polymer becomes larger than the particle, the amplitude of this feature decreases extremely rapidly and becomes negligible. A weak long range and N-dependent component of the monomer-particle pair correlation function is found which is suggested to be the origin of the long range repulsive PMF. Implications of our results for thermodynamics and miscibility are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of Confined Flexible and Unentangled Polymer Melts in Highly Adsorbing Cylindrical Pores

Inspired by the recent neutron spin echo experiments (NSE) designed to address the dynamic phenomena in polymer melts that are induced by interactions with a confining surface, we performedcoarse-grained molecular dynamics simulations to replicate the experimental results in order to provide new molecular insight for the observations. The results show excellent agreement in the values obtained for the normalized coherent single chain dynamic structure factor, S(Q;Dt)/S(Q;0) , between experiments and simulations. The simulations indicate that using different chain molecular weights that are used to achieve scattering contrast results in the uneven distribution of scatterers in the radial direction because lower molecular weight chains prefer to adsorb in the confining surface. In the bulk configuration, both simulations and experiments confirm that the polymer chains follow Rouse dynamics. However, under confinement, the Rouse modes are suppressed. The mean-squared radius of gyration, R2g, and the average relative shape anisotropy k2 of the conformation of the polymer chains indicate a pancake-like conformation near the surface and a bulk-like conformation near the center of the confining cylinder. Direct visualization of the polymers in the simulation confirm the pancake-like conformation of the adsorbed chains and the presence of trains, loops and tails in the region between the adsorbed chains and the chains not in contact with the surface. Despite the presence of these different conformations, the average form factor of the confined chains still follows the Debye function which describes linear ideal chains, which is in agreement with small angle neutron scattering (SANS) experiments. The experimentally inaccessible mean squared displacement of the confined monomers, calculated as a function of radial distance from the pore surface, was obtained in the simulations. The simulation shows a gradual increase of the MSD from the adsorbed, but mobile layer, to that similar to the bulk far away from the surface.

Carrillo, Jan-Michael Y.↗

Relative Size of the Polymer and Nanoparticle Controls Polymer Diffusion in All-Polymer Nanocomposites

The dynamics of polymers in an all-polymer nanocomposite that are composed of soft cross-linked polystyrene nanoparticles and linear polystyrene have been examined. In this article, we describe how the relative size of the nanoparticle to that of the polymer chain and its rigidity impact the linear polymer chain diffusion. The results of the in situ neutron reflectivity experiments show three distinct regimes in the linear polymer diffusion. The results indicate that the inclusion of soft nanoparticles increases the amount of topological constraints and confinement effects for low matrix molecular weight polymer. At modest molecular weights where the size of the nanoparticle and polymer chain are similar, the soft nanoparticles neither inhibit nor enhance the linear polymer diffusion, while at the highest polymer matrix molecular weight, the linear polymer diffusion increases due to an increase in the constraint release mechanism by the soft nanoparticles. Thermal analysis demonstrates that the nanoparticles do not increase the free volume of the system nor do they behave as a plasticizing agent. These results are interpreted to indicate that the competition between a topological barrier effect and enhancing constraint release defines the behavior of a given all-polymer nanocomposite.

36 MATERIALS SCIENCE↗

Quantification of the solid-state charge mobility in a model radical polymer

We establish that an oft-used radical polymer, poly(2,2,6,6-tetramethylpiperidinyloxy methacrylate) (PTMA), has a solid-state hole mobility value on the order of 10 -4 cm 2 V -1 s -1 in a space charge-limited device geometry. Despite being completely amorphous and lacking any $π$-conjugation, these results demonstrate that the hole mobility of PTMA is comparable to many well-studied conjugated polymers [e.g., poly(3-hexylthiophene)]. Furthermore, we show that the space charge-limited charge carrier mobility of these macromolecules is only a weak function of temperature, in contrast to many thermally-activated models of charge transport in polymeric materials. This key result demonstrates that the charge transport in radical polymers is inherently different than that in semicrystalline, conjugated polymers. These results establish the mechanism of solid-state charge transport in radical polymers and provide macromolecular design principles for this emerging class of organic electronic materials.

36 MATERIALS SCIENCE↗

Dynamics of polymer segments, polymer chains, and nanoparticles in polymer nanocomposite melts: A review

The addition of nanoparticles (NPs) to a polymer matrix, forming a polymer nanocomposite (PNC), is known to alter the microscopic dynamic processes of both species which leads to unique macroscopic material properties of the PNC. Because the NPs and polymers have overlapping characteristic length, time, and energy scales, the interactions within these materials are complex and the dynamics are interrelated. In this review, we present an overview of experimental, simulation, and theoretical results that probe multi-scale polymer and nanoparticle dynamics in polymer nanocomposites and navigate the dense parameter space presented by these multicomponent systems. Although a variety of PNC systems are mentioned, we focus this discussion on linear thermoplastics filled with hard spherical or cylindrical NPs in the melt state. We begin by introducing PNCs, the dynamic processes within them, and the importance of dynamics for properties and processing. At the smallest length and time scales, we discuss segmental dynamics in PNCs, including the role of polymer attributes, NP attributes, and NP-polymer interactions. Then, we present measurements of collective motions and intermediate (Rouse) dynamics in various PNC materials. At longer length and time scales, we discuss polymer center-of-mass diffusion in PNCs with either spherical or anisotropic NPs. We then explore the dynamics of the NPs in PNCs and polymer melts, including theoretical predictions, simulation results, and experimental observations. Lastly, we note some of the remaining challenges in probing dynamics in PNC materials and fundamentally studying PNCs more generally.

36 MATERIALS SCIENCE↗

Comparison of the Morphology Development of Polymer-Fullerene and Polymer-Polymer Solar Cells during Solution-Shearing Blade Coating

Here in this work, the detailed morphology studies of polymer poly(3-hexylthiophene-2,5-diyl) (P3HT):fullerene(PCBM) and polymer(P3HT):polymer naphthalene diimide thiophene (PNDIT) solar cell are presented to understand the challenge for getting high performance all-polymer solar cells. The in situ X-ray scattering and optical interferometry and ex situ hard and soft X-ray scattering and imaging techniques are used to characterize the bulk heterojunction (BHJ) ink during drying and in dried state. The crystallization of P3HT polymers in P3HT:PCBM bulk heterojunction shows very different behavior compared to that of P3HT:PNDIT BHJ due to different mobilities of P3HT in the donor:acceptor glass. Supplemented by the ex situ grazing incidence X-ray diffraction and soft X-ray scattering, PNDIT has a lower tendency to form a mixed phase with P3HT than PCBM, which may be the key to inhibit the donor polymer crystallization process, thus creating preferred small phase separation between the donor and acceptor polymer.

36 MATERIALS SCIENCE↗