Search NASA⌕ Search

SEARCH · Search NASA

Results for “PORE STRUCTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Oxidation and Associated Pore Structure Modification During Experimental Alteration of Granite

Weathering plays a crucial role in a number of environmental processes, and the microstructure and evolution of multi-scale pore space is a critically important factor in the weathering of geological formations. In igneous rocks the infiltration of meteoric water into initially relatively dry material can cause the rock to begin to disaggregate, increasing porosity and surface area, and allowing further disaggregation and weathering to occur. These processes, in turn, allow biota to colonize the rock, further enhancing the weathering rate. In some igneous rocks this may be driven by oxidation of primary minerals. One such mineral, biotite, has been repeatedly mentioned as a cause of cracking during oxidation. However, the scale-dependence of the processes by which this occurs are poorly understood. We cannot, therefore, accurately extrapolate laboratory reaction rates to the field in predictive numerical models. In order to better understand the effects of oxidation and test the hypothesis that fracture and disaggregation are initiated by swelling of oxidizing biotites, we reacted granite cores in a selenic acid-rich aqueous solution at 200°C for up to 438 days. Elevated temperatures and selenic acid were used to provide relatively fast reaction rates and highly oxidizing conditions in sealed reaction vessels. These experiments were analyzed using a combination of imaging, X-ray diffraction, Mössbauer spectroscopy, and small- and ultra-small angle neutron scattering to interrogate porosity and microfracture formation. The experimental results show little observable biotite swelling, but significant transport and growth of iron oxides and/or clays along grain boundaries throughout the sample. Significant increases in porosity were also observed at the sample rim, likely associated with feldspar alteration. Fractures and transport were observed throughout the core, suggesting that stresses due to crystallization pressures caused by the growing iron phases may be the initiating factors in granite weathering, possibly followed by biotite swelling after sufficient permeability is achieved.

Anovitz, Lawrence M.↗
DOE OSTI2021

Use of Gas Adsorption and Inversion Methods for Shale Pore Structure Characterization

The analysis of porosity and pore structure of shale rocks has received special attention in the last decades as unconventional reservoir hydrocarbons have become a larger parcel of the oil and gas market. A variety of techniques are available to provide a satisfactory description of these porous media. Some techniques are based on saturating the porous rock with a fluid to probe the pore structure. In this sense, gases have played an important role in porosity and pore structure characterization, particularly for the analysis of pore size and shapes and storage or intake capacity. In this review, we discuss the use of various gases, with emphasis on N2 and CO2, for characterization of shale pore architecture. We describe the state of the art on the related inversion methods for processing the corresponding isotherms and the procedure to obtain surface area and pore-size distribution. The state of the art is based on the collation of publications in the last 10 years. Limitations of the gas adsorption technique and the associated inversion methods as well as the most suitable scenario for its application are presented in this review. Finally, we discuss the future of gas adsorption for shale characterization, which we believe will rely on hybridization with other techniques to overcome some of the limitations.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2022

Multiple experimental studies of pore structure and mineral grain sizes of the Woodford shale in southern Oklahoma, USA

Pore structure study is an important part of unconventional shale reservoir characterization, since the pore system provides the primary petroleum storage space and fluid flow pathways. Previous studies have suggested that the pore structure is related to the total organic carbon (TOC) content, mineral compositions, and the maturity of the organic matter (OM). However, few studies have focused on the mineral grains, the primary grains being deposited but before cementation, which are the building blocks of shale. Eight Woodford Shale outcrop samples from southern Oklahoma were chosen to study the effects of mineral grain size on the pore structure characterization, using multiple and complementary experimental approaches, including laser diffraction, mineralogy, TOC, pyrolysis, liquid immersion porosimetry, mercury intrusion porosimetry, gas physisorption, (ultra) small angle X-ray scattering, scanning electron microscopy, and spontaneous imbibition. The results from different experiments of eight samples show that the Woodford Shale has the mean mineral grain diameters at 3–6 μm, a wide range of porosity at 3–40% and pore diameters at 50–1,000 nm, and various pore connectivity. Grain size variation was probably caused by the sea-level fluctuation during its deposition, which affect the porosity, pore size distribution, and pore connectivity. With decreasing mineral grain sizes, the porosity tends to increase while the pore connectivity worsens. The results also indicate that OM and carbonates in this low-maturity Woodford Shale could block the pores and decrease the porosity. Coupling with the grain size analyses, the control of depositional environment on grain sizes and subsequent effects on pore structure is identified. The pore structure characteristics over a wide pore-diameter range provided by multiple experiments could improve the understanding of storage space and fluid flow in the Woodford Shale to further increase its petroleum production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Reduced diffusion and enhanced retention of multiple radionuclides from pore structure characterization of barrier materials for enhanced repository performance

Fluid flow and chemical transport in porous media are the macroscopic consequences of pore structure, which integrates geometry (e.g., pore size and surface area, pore-size distribution) and topology (e.g., pore connectivity). Low-permeability geological media whose pores are poorly interconnected will exhibit the characteristics of anomalous diffusion and sample size-dependent effective porosity, which will strongly impact long-term net diffusion and retention of radionuclides in geological repository settings involving different host rocks and barrier materials. A suite of innovative and complementary experimental approaches is utilized to study the microscopic pore structure and macroscopic fluid flow & chemical transport for a range of host rocks and barrier materials, in addition to standard clay minerals and reference rocks. With a particular focus on quantifying the presence and magnitude of “isolated” pores for a reduced effective porosity in low-permeability geomedia, the integrated methodologies for basic properties and pore structure characterization of these geomedia include X-ray diffraction, thin section petrography, grain size distribution, water immersion porosimetry after vacuum-pulling for full saturation, mercury intrusion porosimetry, nitrogen physisorption, scanning electron microscopy, X-ray computed tomography, and (ultra-)small angle neutron (X-ray) scattering. In addition, custom-designed gas diffusion, tracer recipe involving a range of anionic and cationic chemicals with subsequent analyses by laser ablation and inductively coupled plasma-mass spectrometry, along with batch sorption, column transport, and imbibition tests were conducted for coupled effects of pore structure and chemical retention/transport. From the perspectives of pore structure in conjunction with multiple and complementary approaches to examining a range of sample sizes under different observational scales, we find that the poor pore connectivity is prevalent in low-permeability media (mudstone and crystalline rock) that is related to geological processes (e.g., compaction, diagenesis and thermal maturation). For example, the deep and organic matter-rich mudstones have a much smaller effective porosity than the total porosity (as a result of poor pore connectivity) and associated diffusion coefficient, and the effective porosity & diffusion coefficients are also dependent upon the sample sizes used in the measurement. Similarly, most of the pore space in the shallow mudstone is also controlled by pore-throat diameters in the 5-50 nm range of intergranular pore types from its fine-grained nature, but with an overall good pore connectivity. However, the nm-sized pore space (physically pore-network architecture) and strong sorption capacities (chemical retention from clay minerals) of both shallow and deep mudstones lead to the synergistic retention of cationic radionuclides and their utilities as effective host rocks and barrier materials. Our unique approaches of studying how the micro-scale pore structure affect macro-scale fluid flow, diffusion & retention, and chemical transport produce improved mechanistic understanding, and realistic quantification, of diffusion and retention of typical radionuclides in a range of generic host rocks and barrier materials (clay/shale, salt, crystalline rock, and tuff), with the overall results leading to scientifically-based understanding of enhanced isolation (from both diffusion and retention) of radionuclides and improved confidence on the long-term performance of geological repository to store high-level radioactive wastes. In addition to the training of 25 undergraduates, graduates, and postdocs of UTA, the scientists (organizations) involved in performing this work (e.g., discussion, sample sharing, and operation of SANS and SAXS instruments) include Ed Matteo, Yifeng Wang, and Kristopher Kuhlman (Sandia National Laboratories), Jens Birkholzer, Liange Zheng, Tim Kneafsey, and Sharon Borglin (Lawrence Berkeley National Laboratory), Mavrik Zavarin (Lawrence Livermore National Laboratory), Yukio Tachi and Yuta Fukatsu (Japan Atomic Energy Agency), Mieke de Craen (Euridice, Belgium), Markus Bleuel (NIST), Wei-Ren Chen, Gergely Nagy, Changwoo Do, William Heller, Larry Anovitz, and Kenneth Littrell (ORNL), as well as Jan Illvsky, Ivan Kuzmenko, Ju-Sang Park and Jon Almers (ANL). Key deliverables include a total of 13 peer-reviewed journal articles (nine published and three under review), 23 presentations at scientific conferences (AAPG, AAPG Southwest Section, AGU, Asian Clay Conference, GSA, GSA South-Central Section, IHLRWM, InterPore, International Conference on Chemistry and Migration Behavior of Actinides and Fission Products in the Geosphere, International Conference on Coupled Processes in Fractured Geological Media: Observation, Modeling and Application), and academic institutions (UTA, New Mexico State University; University of Poitiers, France; University of Helsinki, Finland; Uppsala University, Sweden; Istanbul Technical University, Turkey) and other organizations (Andra, France; Posiva Oy, Finland).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

The soil pore structure encountered by roots affects plant‐derived carbon inputs and fate

Summary Plant roots are the main supplier of carbon (C) to the soil, the largest terrestrial C reservoir. Soil pore structure drives root growth, yet how it affects belowground C inputs remains a critical knowledge gap. By combining X‐ray computed tomography with 14 C plant labelling, we identified root–soil contact as a previously unrecognised influence on belowground plant C allocations and on the fate of plant‐derived C in the soil. Greater contact with the surrounding soil, when the growing root encounters a pore structure dominated by small (< 40 μm Ø) pores, results in strong rhizodeposition but in areas of high microbial activity. The root system of Rudbeckia hirta revealed high plasticity and thus maintained high root–soil contact. This led to greater C inputs across a wide range of soil pore structures. The root–soil contact Panicum virgatum , a promising bioenergy feedstock crop, was sensitive to the encountered structure. Pore structure built by a polyculture, for example, restored prairie, can be particularly effective in promoting lateral root growth and thus root–soil contact and associated C benefits. The findings suggest that the interaction of pore structure with roots is an important, previously unrecognised, stimulus of soil C gains.

Plant Sciences↗
DOE OSTI2022

Effects of Supercritical CO 2 Injection on the Shale Pore Structures and Mass Transport Rates

Characterizing the pore structures and transport properties of low-permeability shales is critical for evaluating these formations as potential seals or storage sites for geological CO 2 sequestration. Here, we use low-pressure gas adsorption in conjunction with nuclear magnetic resonance (NMR) to characterize the pore-size distribution of shales before and after injection of supercritical CO 2 . Nitrogen gas was used as the detecting phase for the adsorption experiments and pentane liquid was used for the NMR experiments. We also performed time-resolved NMR and gravimetric microbalance measurements to observe mass transport during desaturation. We use these data to estimate the self-diffusion coefficient of pentane and changes in the saturation state of the pore network. We analyzed samples with a range of compositions from the Wolfcamp shale before and after exposure to supercritical CO 2 for 3 days. Integrating the gas adsorption and NMR data shows how supercritical CO 2 injection alters the pore-size distribution for pore sizes <1 nm to 1 mm. Finally, our results provide insights on how the pore structure and mass transport properties of different shale lithologies may evolve during storage of supercritical CO 2 .

58 GEOSCIENCES↗
DOE OSTI2021

Curing process and pore structure of metakaolin-based geopolymers: Liquid-state 1H NMR investigation

Geopolymers are emerging construction materials with lower carbon dioxide emissions compared to the conventional cementitious materials. The knowledge of the curing process and the related pore structures are important for optimizing the properties of these materials for different applications. The curing process and final pore structure are sensitive to the amount of used water, however the specifics are unclear. The curing process and pore structures of metakaolin-based geopolymers with a narrow water-to-solid (w/s) ratio (0.59–0.66) were monitored by nuclear magnetic resonance (NMR) relaxometry and cryoporometry. The 14-day curing process was investigated by monitoring the change of T{sub 2} and T{sub 1} relaxation times and water signal intensity. After the curing, the pore structures were characterized by 2D T{sub 1}-T{sub 2} correlation and T{sub 2}-T{sub 2} exchange measurements of absorbed water. The pore size distributions (PSDs) were measured with NMR cryoporometry and compared to nitrogen physisorption and mercury intrusion porosimetry (MIP) results. We found that the relaxation times decreased as the pore structure of the geopolymers matured during the curing while the dissolution and the condensation periods of the curing were distinguished by the changes in signal amplitude reflecting the proton density. After the curing, three distinct pore sizes and connectivity between pores were identified from T{sub 1}-T{sub 2} and T{sub 2}-T{sub 2} spectra. Their PSDs were measured, and they were found to correspond to two different pore sizes originating from the arrangement of clusters and defective pores. In the narrow w/s ratio (0.59–0.66), the curing times were the same for all samples when cured at 24 °C while the pore sizes were observed to increase as a function of the w/s ratio.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Pore Structures in Detritusphere of Soils Under Switchgrass and Restored Prairie Vegetation Community

Root detritusphere, that is, the soil in the vicinity of decomposing root residues, plays an important role in soil microbial activity and C sequestration. Pore structure (size distributions and connectivity of soil pores) in the detritusphere serves as a major driver for these processes and, in turn, is influenced by the physical characteristics of both soil and roots. This study compared pore structure characteristics in the root detritusphere of soils of contrasting texture and mineralogy subjected to > 6 years of contrasting vegetation: monoculture switchgrass and polyculture prairie systems. Soil samples were collected from five experimental sites in the US Midwest representing three soil types. Soil texture and mineralogy were measured using a hydrometer and x-ray powder diffraction, respectively. The intact cores were scanned with x-ray computed micro-tomography to identify visible soil pores, biopores, and particulate organic matter (POM). We specifically focused on pore structure within the detritusphere around the POM of root origin. Results showed that the detritusphere of coarser textured soils, characterized by high sand and quartz contents, had lower porosity in the vicinity of POM compared with finer textured soils. POM vicinities in finer textured soils had high proportions of large (> 300 μm diameter) pores, and their pores were better connected than in the coarser soils. Lower porosity in the outer (> 1 mm) parts of the detritusphere of switchgrass than of prairie suggested soil compaction by roots, with the effect especially pronounced in the coarser soils. Here, the results demonstrated that soil texture and mineralogy played a major, while vegetation played a more modest, role in defining the pore structure in the root detritusphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Changes in soil pore structure generated by the root systems of maize , sorghum and switchgrass affect in situ N 2 O emissions and bacterial denitrification

Due to the heterogeneous nature of soil pore structure, processes such as nitrification and denitrification can occur simultaneously at microscopic levels, making prediction of small-scale nitrous oxide (N 2 O) emissions in the field notoriously difficult. We assessed N 2 O+N 2 emissions from soils under maize (Zea mays L.), switchgrass (Panicum virgatum L.), and energy sorghum (Sorghum bicolor L.), three potential bioenergy crops in order to identify the importance of different N 2 O sources to microsite production, and relate N 2 O source differences to crop-associated differences in pore structure formation. The combination of isotopic surveys of N 2 O in the field during one growing season and X-ray computed tomography (CT) enabled us to link results from isotopic mappings to soil structural properties. Further, our methodology allowed us to evaluate the potential for in situ N 2 O suppression by biological nitrification inhibition (BNI) in energy sorghum. Our results demonstrated that the fraction of N 2 O originating from bacterial denitrification and reduction of N 2 O to N 2 is largely determined by the volume of particulate organic matter occluded within the soil matrix and the anaerobic soil volume. Bacterial denitrification was greater in switchgrass than in the annual crops, related to changes in pore structure caused by the coarse root system. This led to high N-loses through N 2 emissions in the switchgrass system throughout the season a novel finding given the lack of data in the literature for total denitrification. Isotopic mapping indicated no differences in N 2 O-fluxes or their source processes between maize and energy sorghum that could be associated with the release of BNI by the investigated sorghum variety. The results of this research show how differences in soil pore structures among cropping systems can determine both N 2 O production via denitrification and total denitrification N losses in situ.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Spatial heterogeneity analyses of pore structure and mineral composition of Barnett Shale using X-ray scattering techniques

The spatial heterogeneity of pore structure and mineral composition at mu m to mm scales in mm to cm-sized shale samples complicates the laboratory measurements of porosity & pore size distribution and consequently reservoir quality evaluation. Traditional fluid invasion characterization methods typically take hours to days to get data and can only test relatively small samples (usually 2.54 cm diameter core plugs and mm-sized rock chips). Furthermore, the Xray scattering techniques at the Advanced Photon Source of the Argonne National Laboratory have the capability to non-destructively determine the pore structure and mineral composition of mm x mm area in a short time of seconds and to hold several to hundreds of mm 2 sized sample to conduct large area heterogeneity analysis in the short duration of hours. With the use of ultra-small angle X-ray scattering (USAXS), small-angle X-ray scattering (SAXS), and wide-angle X-ray scattering (WAXS), the porosity, surface area and pore size distribution of two Barnett Shale samples have been mapped out and the mineral compositions are determined qualitatively. Overall, the porosity and pore surface area of the Barnett Shale Sample A over a 36 cm2 area ranges from 1.70 % to 8.13 % and 8.87 m 2 /g to 40.2 m 2 /g respectively. The porosity and surface area of Sample B over a 24 cm 2 area varies from 3.15 % to 11.7 % and 18.3 m 2 /g to 60.2 m 2 /g. In Sample A, the mineral composition shows a shift from carbonate-rich to siliciclastic-rich over a distance of several millimeters. For Sample B, the mineral compositions are mainly siliciclastic and do not show an obvious lithological change. The direct observations of high spatial heterogeneity of pore structure and mineral composition in shale illustrate the utility of integrated X-ray scattering techniques to provide valuable insights into shale studies and reservoir evaluation.

58 GEOSCIENCES↗
DOE OSTI2024

Exploitation of Pore Structure for Increased CO 2 Selectivity in Type 3 Porous Liquids

CO 2 capture requires materials with high adsorption selectivity and an industrial ease of implementation. To address these needs, a new class of porous materials was recently developed that combines the fluidity of solvents with the porosity of solids. Type 3 porous liquids (PLs) composed of solvents and metal–organic frameworks (MOFs) offer a promising alternative to current liquid carbon capture methods due to the inherent tunability of the nanoporous MOFs. However, the effects of MOF structural features and solvent properties on CO 2 –MOF interactions within PLs are not well understood. Herein experimental and computational data of CO 2 gas adsorption isotherms were used to elucidate both solvent and pore structure influences on ZIF-based PLs. The roles of the pore structure including solvent size exclusion, structural environment, and MOF porosity on PL CO 2 uptake were examined. A comparison of the pore structure and pore aperture was performed using ZIF-8, ZIF-L, and amorphous-ZIF-8. Adsorption experiments here have verified our previously proposed solvent size design principle for ZIF-based PLs (1.8× ZIF pore aperture). Furthermore, the CO 2 adsorption isotherms of the ZIF-based PLs indicated that judicious selection of the pore environment allows for an increase in CO 2 selectivity greater than expected from the individual PL components or their combination. This nonlinear increase in the CO 2 selectivity is an emergent behavior resulting from the complex mixture of components specific to the ZIF-L + 2'-hydroxyacetophenone-based PL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Evolution of Pore Structure in Organic-Lean and Organic-Rich Mudrocks

The pore structure of mudrocks is a key characteristic to evaluate flow behavior through these rocks. Although significant advances have been made to resolve pore characteristics, porosity evolution, or pore connectivity, there is still insufficient knowledge linking porosity evolution to flow and transport in mudrocks. To better understand these links, we conducted very small-angle (VSANS) and small-angle neutron scattering (SANS) experiments on 13 sets of mudrocks from global locations, characterized by differences in composition, maturity, and depositional environment. Our results indicate that a homogeneous pore structure reflects a stable and low-energy depositional environment. Organic-lean mudrocks mainly contain pores <10 nm, which restricts flow and is beneficial for, e.g., caprock seal integrity. Increasing maturity as a result of increasing burial depth, and therefore, temperature leads to porosity evolution. In organic-rich mudrocks (ORMs), this happens through the generation of organic matter pores and pore preservation around diagenetically formed carbonates. ORMs mainly contain macropores (>50 nm), favoring production from, e.g., unconventional reservoirs. SANS-derived pore size distributions will help to better understand fluid imbibition and flow properties in mudrocks through comprehensive quantitative characterization of the nano- to micron scale pore network conduits and their relationships to burial diagenesis.

58 GEOSCIENCES↗
DOE OSTI2021

Compositional Control on Shale Pore Structure Characteristics across a Maturation Gradient: Insights from the Devonian New Albany Shale and Marcellus Shale in the Eastern United States

The pore structure characteristics of shales are controlled by their mineralogical and organic matter (OM) composition. However, the contributions by different components in shales at varying thermal maturities remain poorly understood. In this study, Devonian New Albany Shale and Marcellus Shale samples spanning a thermal maturity from marginally mature (vitrinite reflectance R o 0.55%) to post-mature (R o 2.41 %) were selected to study the control of composition on the pore structure properties of shales at different stages of thermal maturation. Scanning electron microscope (SEM) imaging was used to examine pore types in shales, and low-pressure N 2 and CO 2 adsorption analyses were used to quantitatively characterize the mesopore and micropore characteristics of bulk shales and major components in shales. The results show that matrix-associated pores including interparticle pores between silt-sized mineral grains, phyllosilicate framework pores, and intraparticle pores within mineral grains exist in all samples but become less common with increasing maturity, which is likely caused by elevated compaction, cementation, and occlusion with bitumen. Secondary organic pores were not observed under SEM at marginal maturity but were detected in the condensate–wet gas and dry gas windows, with more organic pores in the dry gas window. At marginal maturity, OM has large amounts of mesopores and micropores as demonstrated by low-pressure N 2 and CO 2 adsorption analyses of OM isolated from shales, even though no OM-hosted pores were observed under SEM. With increasing thermal maturity, the mesopore and micropore specific surface area of OM increase and make greater contributions to the pore structure properties of bulk shales. The mesopore and micropore properties of shales are controlled by OM content and maturity as well as by clay mineral type and content, and they can be estimated from the contribution of each component at different stages of thermal maturation. In conclusion, accurate evaluation of the pore volume and SSA of shales will have important implications for assessing gas adsorption and transport in shales.

03 NATURAL GAS↗
DOE OSTI2024

Effects of Interactions Between Produced Formation Fluid and Rock Matrix on Pore Structure of Caney Shale, Southern Oklahoma

ABSTRACT: Rock-fluid interactions change properties of shales during exploitation. To investigate effects of rock-fluid interactions on pore structure of shales matrix after hydraulic fracturing, powder samples from two late Mississippian Caney Shale cores in the Ardmore Basin, southern Oklahoma, were used to react with formation produced fluid from the field in the batch reactor analysis. X-ray diffraction for mineralogy and Low-pressure nitrogen adsorption isotherms for pore structure were measured for original, after-7days, and after-30days samples. Results show that the samples consist mainly of quartz, followed by clay minerals, carbonates, and feldspar. The pore sizes of micropore (<2 nm) and mesopore (2-50 nm) increase 14%-233% due to dissolution of pyrite, feldspar, and carbonates after 7 days. Due to the transformation from smectite to illite and the increase of pore size, the specific surface area (SSA) decreases after 7-days interactions. After 30-days interactions, the micropore volume slightly increases and the mesopore and macropore volume decreases. Due to the decrease of pore size, the SSA of 30-days reacted samples increases correspondingly and is lower (for the clay-rich sample) or higher (for the calcareous sample) than that of the unreacted samples. Findings improve our understanding of dynamic alteration of shale properties during production. 1. INTRODUCTION Energy demand will continuously grow owing to the increasing global population as well as energy consumption (EIA, 2023). On the other hand, shale gas and oil reshaped the energy market in the United States, enabling the United States to become a net-export of natural gas country in 2017 (EIA, 2023). However, shale reservoirs are challenging tight formations that are still poorly understood in the extraction and production of hydrocarbons (Ross and Bustin, 2009; Curtis et al., 2012; Xiong et al., 2015, 2021a; Li Y. et al., 2016; Gong et al., 2019a; Benge et al., 2021; Awejori et al., 2022; Huang et al., 2022). One of the most challenging topics is the rock-fluid interactions post hydraulic fracturing and its subsequent impacts on the pore structures of fractured formation matrix.

Xiong, Fengyang↗
DOE OSTI2025

Belowground plant carbon and nitrogen exchange: plant-derived carbon inputs and pore structure formation

Belowground plant transfer of carbon (C) and nitrogen (N) can benefit soil ecosystems, increasing soil C gains and plant N availability, while improving soil pore structure. We explored such transfers among three plant species of North American prairie, where C and N were transferred from a grass (Panicum virgatum L., switchgrass (Sgrass)) to either a legume (Lespedeza capitata Michx., bush clover (Bclover)), a forb (Rudbeckia hirta L., black-eyed Susan (BSforb)), or a mixture of the two. The plants were grown either with/out direct root contact, thus allowing assessment of the relative contributions of fungal- and root-based transfer pathways. The Sgrass was labeled with 13 C and 15 N, and C and N transfers were assessed by measuring isotope enrichment of roots and aboveground biomass of neighboring plants. Soil inputs of plant-derived C and N were assessed by isotope analyses of the rhizosphere soil. X-ray computed tomography was used for pore structure analyses. Carbon transfer was much higher in the presence of direct/close root contact between source and recipient plants, yet N transfers appeared to be mainly fungal driven. Here, while C and N were readily transferred from Sgrass to other Sgrass and Bclover neighbors, transfers to BSforb were negligible. However, in a three species system, the presence of the legume enhanced C and N transfers to BSforb, suggesting non-additive influences of diverse plant community composition. The more plant-derived C and N was found in the rhizosphere of recipient plants, the greater C and N transfers through roots. Greater C and N transfers were associated with increases in 8–30 μm diameter pores and decreases in >150 μm pores. Summarily, diverse plant communities, especially those with legumes, increase C and N transfers, which then benefit soil C inputs and its protection via changes in pore structure.

13 CO 2 pulse labeling↗
DOE OSTI2024

Integrated experimental studies of pore structure and fluid uptake in the Bossier Shale in eastern Texas, USA

Within the Haynesville-Bossier Shale complex, the Bossier Shale has not been extensively studied by either industry and academia, despite it being an unconventional gas reservoir and a potential caprock for carbon storage in the underlaying Haynesville Shale. The lack of knowledge of the complex pore structures and fluid-rock interactions hinders the effective extraction of gas and the characterization of fluid reservoirs and sealing capacity. Integrated experimental studies of pore structure and fluid-rock interactions were conducted in seven Bossier Shale core samples collected in eastern Texas. Petrographic, geochemical, and petrophysical properties such as mineral composition, organic richness, thermal maturity, porosity, pore/pore throat diameter distribution, water-accessible pores, liquid water imbibition, and water vapor adsorption were characterized using complementary approaches of thin-section petrography, scanning electron microscopy, X-ray diffraction, total organic matter, pyrolysis, mercury intrusion porosimetry, nuclear magnetic resonance, (Ultra-) small angle X-rays scattering as well as small angle neutron scattering with deuterated liquids and contrast variation. Further, the results show that the thermally mature Bossier Shales are composed of mixed argillaceous mudstone, mixed mudstone, and mixed carbonate mudstone. The shale contains both organic and inorganic pores, with porosities of 3.24-9.37 %, pore-to-throat ratios of 1.65 to 19.4, and water-accessible pores accounting for 28.7-72.6 % of total pores. Approaches of liquid water imbibition and water vapor adsorption, with and without direct contact of water with shale samples, indicate that liquid water first enters the nano-sized pores under high capillary pressures, and water vapor adsorption is mainly controlled by both clay minerals and pores with diameters less than 10 nm. These findings contribute to a better understanding of pore structures and water-shale interactions and their controlling factors in the Bossier Shale.

58 GEOSCIENCES↗
DOE OSTI2023

Interactions among soil texture, pore structure, and labile carbon influence soil carbon gains

Perennial vegetation with high plant diversity, e.g., restored prairie, is known for stimulation of soil carbon (C) gains, due in part to enhanced formation of pore structure beneficial for long-term C storage. However, the prevalence of this phenomenon across soils of different types remains poorly understood. The aim of the study was to assess the associations between pore structure, soil C, and their differences in monoculture switchgrass and polyculture restored prairie vegetation across a wide range of soils dominating the Upper Midwest of the USA. Six experimental sites were sampled, representing three soil types with texture ranging from sandy to silt loams. The two vegetation systems studied at each site were (i) monoculture switchgrass (Panicum virgatum L.), and (ii) polyculture restored prairie, also containing switchgrass as one of its species. X-ray computed micro-tomography (µCT) was employed to analyze soil pore structure. Structural equation modeling and multiple path analyses were used to assess direct and indirect effects of soil texture and pore characteristics on microbial biomass C (MBC), particulate organic matter (POM), dissolved organic C (DOC), short-term respiration (CO 2 ), and, ultimately, soil organic C (SOC). Across studied sites, prairie increased fractions of medium (50–150 µm Ø) pores by 11–45 %, SOC by 3–69 %, and MBC by 18–59 % (except for one site). The greater were the prairie-induced increases in the medium pore volumes, the greater were the prairie-induced SOC gains. Greater C losses via CO 2 and DOC contributed to slower C accumulation in the prairie soil. We surmise that the interactive feedback loop relating medium pores and soil C acts across a wide range of soil textures and is an important mechanism through which perennial vegetation with high plant diversity, such as restored prairie, promotes rapid SOC gains.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Micro- to nano-scale areal heterogeneity in pore structure and mineral compositions of a sub-decimeter-sized Eagle Ford Shale

Mineral and organic matter compositions & pore structures of fine-grained shale influence reservoir properties. To improve the understanding of spatial heterogeneity in core-sized samples, methods of microscale X-ray fluorescence (μXRF) mapping, (ultra-) small-angle x-ray scattering [(U)SAXS] and wide-angle X-ray scattering (WAXS) have been used to determine elemental, pore-structure variations at scales up to ~10 cm on two samples prepared at circular and rectangular orientations from a piece of Eagle Ford Shale outcrop in South Texas, USA. In addition, thin section petrography and field emission-scanning electron microscopy observations, X-ray diffraction (XRD), total organic carbon, and pyrolysis were utilized to investigate the potential spatial heterogeneity of pore types, mineral and organic matter compositions for cm-sized samples at both orientations. Overall, the siliceous-carbonate mineral contents in these two samples (8 cm×8 cm×0.08 cm and 5 cm × 8 cm × 0.08 cm, in terms of width×length×thickness) of carbonate-rich Eagle Ford Shale vary between laminations at mm scales. For the circular sample, porosity and specific surface area (SSA) variations range from 0.82 to 3.04% and 1.51 to 14.1 m 2 /g, respectively. For the rectangular sample, values for porosity and SSA vary from 0.93 to 2.50% and 3.95 to 10.8 m 2 /g. By analyzing six selected sub-samples on each of two samples with (U)SAXS and XRD techniques, nm-sized pores are mainly interparticle ones in the higher calcite regions, where the porosity is also relatively lower, while the lower calcite regions consist of both interparticle and intraparticle pore types with higher porosity. Lastly, the μXRF and (U)SAXS mappings are combined to generate porosity distribution maps to provide more insights about sample heterogeneity related to the laminations and fractures at our observational scales.

58 GEOSCIENCES↗