Search NASA⌕ Search

SEARCH · Search NASA

Results for “POWER FACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Achieving high power factor and output power density in p-type half-Heuslers Nb 1-x Ti x FeSb

Significance Thermoelectric technology can boost energy consumption efficiency by converting some of the waste heat into useful electricity. Heat-to-power conversion efficiency optimization is mainly achieved by decreasing the thermal conductivity in many materials. In comparison, there has been much less success in increasing the power factor. We report successful power factor enhancement by improving the carrier mobility. Our successful approach could suggest methods to improve the power factor in other materials. Using our approach, the highest power factor reaches ∼106 μW⋅cm −1 ⋅K −2 at room temperature. Such a high power factor further yields a record output power density in a single-leg device tested between 293 K and 868 K, thus demonstrating the importance of high power factor for power generation applications.

36 MATERIALS SCIENCE↗

Thermoelectric power factor enhancement with gate-all-around silicon nanowires

The thermoelectric properties of gate-all-around silicon nanowires (Si NWs) are calculated to determine the potential for significant power factor enhancement. The Boltzmann transport equation and relaxation time approximation are employed to develop an electron transport model used to determine the field-effect mobility, electrical conductivity, Seebeck coefficient, and power factor for Si NWs with cross-sectional areas between 4 nm × 4 nm and 12 nm × 12 nm and a range of gate biases. Electrical conductivity for the gated Si NWs was much higher than that of doped Si due to the lack of ionized impurities and correspondingly greater carrier mobility. A significant increase in electrical conductivity with decreasing Si NW cross-sectional area was also observed due to a large increase in the average carrier density. For all Si NWs, the Seebeck coefficient was lower than that of doped bulk Si due to the different energy dependence between ionized impurity and phonon-mediated scattering processes. This decrease was also confirmed with Seebeck coefficient measurements of multigated Si NWs and n-type Si thin-films. Quantum confinement was also found to increase the Seebeck coefficient for <8 nm × 8 nm Si NWs and also at high charge densities. A maximum power factor of 6.8 × 10{sup −3} W m{sup −1} K{sup −2} was calculated for the 6 nm × 6 nm Si NWs with typical Si/SiO{sub 2} interface roughness, which is 2–3 × those obtained experimentally for bulk Si. The power factor was also found to greatly depend on surface roughness, with a root-mean-square roughness of <0.8 nm necessary for power factor enhancement. An increase in ZT may also be possible if a low thermal conductivity can be obtained with minimal surface roughness.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Power Factor revisited

Power factor is a term whose value can be found by dividing the power in a load to the product of the voltage and the current. It has been used as a rule of thumb to estimate the cost of the losses incurred in delivering reactive power. But it has been extremely troublesome. The same load might be penalized by some definitions, and might not by others. That is still the situation today. There have been two efforts at solution. In 1919 a committee of experts was formed to solve the problem of its definition. The effort did not succeed at producing a definition; two alternatives were recommended in the committee’s final report, but both were adopted. In 2010, IEEE issued Standard 1459 to give definitions. In this standard, definitions of power factor appear under no less than seven different headings. The problem demands solution. The matter is of considerable economic importance to power producers, consumers, and instrument makers. This paper examines the history of the topic, and explores reasons for the difficulty of definition in terms of measurement theory. It is shown that power factor is not suited to purpose. In fact, no definition can exist that will define power factor usefully for its intended economic purpose. Two alternatives are proposed.

power factror, definitions, measurement theory, IE↗

The role of boron segregation in enhanced thermoelectric power factor of CoSi{sub 1-x}B{sub x} alloys

We report on the influence of boron segregation on the thermoelectric properties of CoSi. Contrary to previous suggestions, and in stark contrast to aluminum substitution, boron does not enter the lattice on the Si site, but rather segregates to the grain boundaries in these alloys. Through a combination of x-ray diffraction, scanning electron microscope, and scanning Auger techniques, we present clear evidence of the formation of a CoB phase at the grain boundaries. Consistent with the failure of B to substitute for Si, we observe no changes in the electron concentration or the Seebeck coefficient under boron substitution. The electrical resistivity, on the other hand, displays a non-monotonic behavior with increasing boron concentration, first decreasing for small amounts of boron, before increasing at higher levels of substitution. We attribute this behavior to a combination of an initial healing effect of boron on microcracks, followed by the eventual increase in electron scattering by the secondary CoB phase at higher concentrations.

36 MATERIALS SCIENCE↗

Enhanced power factor of higher manganese silicide via melt spin synthesis method

We report on the thermoelectric properties of the Higher Manganese Silicide MnSi₁.₇₅ (HMS) synthesized by means of a one-step non-equilibrium method. The ultrahigh cooling rate generated from the melt-spin technique is found to be effective in reducing second phases, which are inevitable during the traditional solid state diffusion processes. Aside from being detrimental to thermoelectric properties, second phases skew the revealing of the intrinsic properties of this class of materials, for example the optimal level of carrier concentration. With this melt-spin sample, we are able to formulate a simple model based on a single parabolic band that can well describe the carrier concentration dependence of the Seebeck coefficient and power factor of the data reported in the literature. An optimal carrier concentration around 5x10²⁰ cm⁻³ at 300 K is predicted according to this model. The phase-pure melt-spin sample shows the largest power factor at high temperature, resulting in the highest zT value among the three samples in this paper; the maximum value is superior to those reported in the literatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origins of enhanced thermoelectric power factor in topologically insulating Bi{sub 0.64}Sb{sub 1.36}Te{sub 3} thin films

In this research, we report the enhanced thermoelectric power factor in topologically insulating thin films of Bi{sub 0.64}Sb{sub 1.36}Te{sub 3} with a thickness of 6–200 nm. Measurements of scanning tunneling spectroscopy and electronic transport show that the Fermi level lies close to the valence band edge, and that the topological surface state (TSS) is electron dominated. We find that the Seebeck coefficient of the 6 nm and 15 nm thick films is dominated by the valence band, while the TSS chiefly contributes to the electrical conductivity. In contrast, the electronic transport of the reference 200 nm thick film behaves similar to bulk thermoelectric materials with low carrier concentration, implying the effect of the TSS on the electronic transport is merely prominent in the thin region. The conductivity of the 6 nm and 15 nm thick film is obviously higher than that in the 200 nm thick film owing to the highly mobile TSS conduction channel. As a consequence of the enhanced electrical conductivity and the suppressed bipolar effect in transport properties for the 6 nm thick film, an impressive power factor of about 2.0 mW m{sup −1} K{sup −2} is achieved at room temperature for this film. Further investigations of the electronic transport properties of TSS and interactions between TSS and the bulk band might result in a further improved thermoelectric power factor in topologically insulating Bi{sub 0.64}Sb{sub 1.36}Te{sub 3} thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Method and apparatus to provide power conversion with high power factor

A power converter circuit rectifies a line voltage and applies the rectified voltage to a stack of capacitors. Voltages on the capacitors are coupled to a plurality of regulating converters to be converted to regulated output signals. The regulated output signals are combined and converted to a desired DC output voltage of the power converter. Input currents of the regulating converters are modulated in a manner that enhances the power factor of the power converter.

30 DIRECT ENERGY CONVERSION↗

Pd 2 Se 3 Monolayer: A Promising Two-Dimensional Thermoelectric Material with Ultralow Lattice Thermal Conductivity and High Power Factor

A high power factor and low lattice thermal conductivity are two essential ingredients of highly efficient thermoelectric materials. Although monolayers of transition-metal dichalcogenides possess high power factors, high lattice thermal conductivities significantly impede their practical applications. Our first-principles calculations show that these two ingredients are well fulfilled in the recently synthesized Pd 2 Se 3 monolayer, whose crystal structure is composed of [Se 2 ] 2- dimers, Se 2- anions, and Pd 2+ cations coordinated in a square-planar manner. Our detailed analysis of third-order interatomic force constants reveals that the anharmonicity and soft phonon modes associated with covalently bonded [Se 2 ] 2- dimers lead to ultralow lattice thermal conductivities in Pd 2 Se 3 monolayers (1.5 and 2.9 W m -1 K -1 along the a- and b-axes at 300 K, respectively), which are comparable to those of high-performance bulk thermoelectric materials such as PbTe. Moreover, the “pudding-mold” type band structure, caused by Pd 2+ (d 8 ) cations coordinated in a square-planar crystal field, leads to high power factors in Pd 2 Se 3 monolayers. Consequently, both electron- and hole-doped thermoelectric materials with a considerably high zT can be achieved at moderate carrier concentrations, suggesting that Pd 2 Se 3 is a promising two-dimensional thermoelectric material. Our results suggest that hierarchical chemical bonds, that is, coexistence of different types of chemical bonds, combined with a square-planar crystal field is a promising route for designing high-efficiency thermoelectric materials.

36 MATERIALS SCIENCE↗

Ni and Se co-doping increases the power factor and thermoelectric performance of CoSbS

In this paper, we present a new investigation on paracostibite (CoSbS), a potential thermoelectric material for power generation in the intermediate temperature range (700–900 K) consisting of earth abundant elements. We report an improved synthesis of single phase materials of Co 1–x Ni x SbS 1–y Se y (x = 0–0.07, y = 0–0.09) using vacuum melting and annealing followed by SPS processing. The effects of Ni and Se co-doping on the electronic and thermal transport properties of CoSbS were investigated. Doping with Ni on the Co site increases the carrier concentration and moves the Fermi level deep into the conduction band, producing an enhanced power factor. First-principles electronic band structure calculations indicate a multi valley nature of the conduction band where Ni doping leads to n-type behaviour and a sharp increase of the density of states effective mass, enhancing the Seebeck coefficient. Unlike the Ni doping which has little effect on thermal transport, alloying Se on the S site intensifies the alloying scattering resulting in a lower lattice thermal conductivity of 2.4 W m –1 K –1 at 900 K for Co 0.93 Ni 0.07 SbS 0.93 Se 0.07 . Alloying Se on the S site of the structure further boosts the power factor to 22 μW cm –1 K –2 and leads to a maximum ZT of 0.58 at 900 K, which is the best ZT value achieved in the system.

36 MATERIALS SCIENCE↗

Single-Phase Active Boost Rectifier with Power Factor Correction for Wireless Power Transfer Applications

Wireless Power Transfer (WPT) technology is a novel research area in the charging technology that bridges utility and the automotive industries. There are various solutions that are currently being evaluated by several research teams to find the most efficient way to manage the power flow from the grid to the vehicle energy storage system. There are different control parameters that can be utilized to compensate for the change in the impedance. To understand the power flow through the system this paper presents a novel approach to the system model and the impact of different control parameters on the load power. The implementation of an active front-end rectifier on the grid side for power factor control and voltage boost capability for load power regulation is also discussed.

PEV charging↗

Amphoteric Indium Enables Carrier Engineering to Enhance the Power Factor and Thermoelectric Performance in n -Type Ag n Pb 100 In n Te 100+2 n (LIST)

The Ag and In co-doped PbTe, Ag n Pb 100 In n Te 100+2n (LIST), exhibits n-type behavior and features unique inherent electronic levels that induce self-tuning carrier density. Results show that In is amphoteric in the LIST, forming both In 3+ and In 1+ centers. Through unique interplay of valence fluctuations in the In centers and conduction band filling, the electron carrier density can be increased from ≈3.1 × 10 18 cm -3 at 323 K to ≈2.4 × 10 19 cm -3 at 820 K, leading to large power factors peaking at ≈16.0 μWcm -1 K -2 at 873 K. The lone pair of electrons from In + can be thermally continuously promoted into the conduction band forming In 3+ , consistent with the amphoteric character of In. Moreover, with rising temperature, the Fermi level shifts into the conduction band, which enlarges the optical band gap based on the Moss–Burstein effect, and reduces bipolar diffusion and thermal conductivity. Adding extra Ag in LIST improves the electrical transport properties and meanwhile lowers the lattice thermal conductivity to ≈0.40 Wm -1 K -1 . Here, the addition of Ag creates spindle-shaped Ag 2 Te nanoprecipitates and atomic-scale interstitials that scatter a broader set of phonons. As a result, a maximum ZT value ≈1.5 at 873 K is achieved in Ag 6 Pb 100 InTe 102 (LIST).

36 MATERIALS SCIENCE↗

Simulation of a Wireless Power Transfer System for Electric Vehicles with Power Factor Correction

Wireless power transfer has been a popular topic of recent research. Most research has been done to address the limitations of coil-to-coil efficiency. However, little has been done to address the problem associated with the low input power factor with which the systems operate. This paper details the steps taken to analyze a wireless power transfer system from the view of the power grid under a variety of loading conditions with and without power factor correction.

Pickelsimer, Michael C↗