Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRESSURE RANGE MICRO PA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Surface oxidation of GaN(0001): Nitrogen plasma-assisted cleaning for ultrahigh vacuum applications

The cleaning of metal-organic vapor-phase epitaxial GaN(0001) template layers grown on sapphire has been investigated. Different procedures, performed under ultrahigh vacuum conditions, including degassing and exposure to active nitrogen from a radio frequency nitrogen plasma source have been compared. For this purpose, x-ray photoelectron spectroscopy, reflection high-energy electron diffraction, and scanning tunneling microscopy have been employed in order to assess chemical as well as structural and morphological surface properties. Initial degassing at 600 °C under ultrahigh vacuum conditions only partially eliminates the surface contaminants. In contrast to plasma assisted nitrogen cleaning at temperatures as low as 300 °C, active-nitrogen exposure at temperatures as high as 700 °C removes the majority of oxide species from the surface. However, extended high-temperature active-nitrogen cleaning leads to severe surface roughening. Optimum results regarding both the removal of surface oxides as well as the surface structural and morphological quality have been achieved for a combination of initial low-temperature plasma-assisted cleaning, followed by a rapid nitrogen plasma-assisted cleaning at high temperature.

36 MATERIALS SCIENCE↗

Effect of ammonium-sulfide solvent on the surface passivation of GaSb (100)

X-ray photoemission spectroscopy and scanning electron microscopy are used to study the effect of a solvent on the chemical composition of a sulfide passivating layer formed on GaSb (100) surface. Treatment of the GaSb (100) surface with ammonium-sulfide solutions results in the formation of a thick (several tens of nanometers) coating composed of a mixture of various binary and ternary gallium and antimony sulfides. The chemical compositions of the passivating sulfide layers formed in aqueous and alcoholic ammonium-sulfide solutions are different. Annealing of the sulfide layer at 360°C in ultrahigh vacuum leads to the partial desorption of antimony from the surface, the decomposition of ternary sulfides into their binary constituents, and change in the surface band bending of this layer.

36 MATERIALS SCIENCE↗

Solid-phase synthesis of boron carbides ReB{sub 2}C (Re = Ho, Tm, Lu) of rare earth elements

Approaches to solid-phase synthesis of boron carbides of heavy rare-earth elements using the hydride phase have been considered. Synthetic procedures with the use of carbon in the forms of carbon black and pyrographite were tested under atmospheric pressure, in medium and high vacuum. The obtained samples were characterized by X-ray and chemical (elemental) analyzes. A technique for obtaining compact samples of boron carbides of Ho, Tm, and Lu, which are homogeneous in the phase composition, has been developed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multifunctional ultra-high vacuum apparatus for studies of the interactions of chemical warfare agents on complex surfaces

A fundamental understanding of the surface chemistry of chemical warfare agents is needed to fully predict the interaction of these toxic molecules with militarily relevant materials, catalysts, and environmental surfaces. For example, rules for predicting the surface chemistry of agents can be applied to the creation of next generation decontaminants, reactive coatings, and protective materials for the warfighter. Here, we describe a multifunctional ultra-high vacuum instrument for conducting comprehensive studies of the adsorption, desorption, and surface chemistry of chemical warfare agents on model and militarily relevant surfaces. The system applies reflection-absorption infrared spectroscopy, x-ray photoelectron spectroscopy, and mass spectrometry to study adsorption and surface reactions of chemical warfare agents. Several novel components have been developed to address the unique safety and sample exposure challenges that accompany the research of these toxic, often very low vapor pressure, compounds. While results of vacuum-based surface science techniques may not necessarily translate directly to environmental processes, learning about the fundamental chemistry will begin to inform scientists about the critical aspects that impact real-world applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduction phases of thin iron-oxide nanowires upon thermal treatment and Li exposure

Iron oxide nanostructures, a promising alternative to carbon-based anode in lithium-ion batteries, can be produced using a hard template route. This procedure guarantees the formation of Fe{sub 2}O{sub 3} nanowires with comparable diameter and size (average diameter 8 nm) with a dominant cubic γ-phase at the surface. Lithium exposure of the iron oxide nanowires in ultra-high-vacuum (UHV) conditions induces reduction of the Fe ion, leading to a Fe{sub 3}O{sub 4} and then to a Fe{sup 2+} phase, as determined by means of core-level photoemission spectroscopy. Mild annealing of Fe{sub 2}O{sub 3} in UHV determines an oxygen content reduction for the nanowires at lower temperature with respect to the bulk phase. The morphology and the evolution of the electronic properties upon reduction have been compared to those of micro-sized bulk-like grains, to unravel the role of the reduced size and surface-volume ratio.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A portable high-resolution soft x-ray and extreme ultraviolet spectrometer designed for the Shanghai EBIT and the Shanghai low energy EBITs

A portable high resolution soft x-ray and extreme ultraviolet (EUV) spectrometer has been developed for spectroscopic research at the Shanghai Electron Beam Ion Trap (EBIT) laboratory. A unique way of aligning the grazing incidence spectrometer using the zero order of the grating is introduced. This method is realized by extending the range of the movement of the CCD detector to cover the zero order. The alignment can be done in a few minutes, thus leading to a portable spectrometer. The high vacuum needed to be compatible with the EBITs is reached by mounting most of the translation and rotation stages outside the chamber. Only one high vacuum compatible linear guide is mounted inside the chamber. This is to ensure the convenient interchange of the gratings needed to enable wavelength coverage of the whole range of 10 to 500 Å. Spectra recorded with one of our low energy EBITs shows that a resolving power of above 800 can be achieved. In the slitless configuration used in this work, we found the resolving power to be limited by the width of the EBIT plasma. When mounted on the Shanghai EBIT which is a high energy EBIT and has a narrower EBIT plasma width, the estimated resolving power will be around 1400 at 221.15 Å.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design and simulation of MEMS vector hydrophone with reduced cross section based meander beams

MEMS based vector hydrophone is being one of the key device in the underwater communications. In this paper, we presented a bio-inspired MEMS vector hydrophone. The hydrophone structure consists of a proof mass suspended by four meander type beams with reduced cross-section. Modal patterns of the structure were studied. First three modal frequencies of the hydrophone structure were found to be 420 Hz, 420 Hz and 1646 Hz respectively. The deflection and stress of the hydrophone is found have linear behavior in the 1 µPa – 1Pa pressure range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic force microscopy studies of homoepitaxial GaN layers grown on GaN template by laser MBE

We have grown homoepitaxial GaN films on metal organic chemical vapor deposition (MOCVD) grown 3.5 µm thick GaN on sapphire (0001) substrate (GaN template) using an ultra-high vacuum (UHV) laser assisted molecular beam epitaxy (LMBE) system. The GaN films were grown by laser ablating a polycrystalline solid GaN target in the presence of active r.f. nitrogen plasma. The influence of laser repetition rates (10-30 Hz) on the surface morphology of homoepitaxial GaN layers have been studied using atomic force microscopy. It was found that GaN layer grown at 10 Hz shows a smooth surface with uniform grain size compared to the rough surface with irregular shape grains obtained at 30 Hz. The variation of surface roughness of the homoepitaxial GaN layer with and without wet chemical etching has been also studied and it was observed that the roughness of the film decreased after wet etching due to the curved structure/rough surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fabrication of Silicon Nanostructures for Application in Photonics

Silicon is the primary material of modern electronics. It also possesses bright potentials for applications in nanophotonics. At the same time optical properties of bulk silicon do not fully satisfy requirements imposed on them. Fortunately, properties of silicon nanostructures strongly depend on their shapes and sizes. In this regard, of special interest is the development of fabrication and post-processing methods of silicon nanostructures. In this contribution we propose a method for silicon nanostructures fabrication combining the technique of high-vacuum deposition with metal-assisted chemical etching. SEM images as well as ellipsometry, Raman scattering and optical spectroscopy data prove that the desired structural changes were obtained.

36 MATERIALS SCIENCE↗

Ultrahigh vacuum/high-pressure flow reactor for surface x-ray diffraction and grazing incidence small angle x-ray scattering studies close to conditions for industrial catalysis

A versatile instrument for the in situ study of catalyst surfaces by surface x-ray diffraction and grazing incidence small angle x-ray scattering in a 13 ml flow reactor combined with reaction product analysis by mass spectrometry has been developed. The instrument bridges the so-called ''pressure gap'' and ''materials gap'' at the same time, within one experimental setup. It allows for the preparation and study of catalytically active single crystal surfaces and is also equipped with an evaporator for the deposition of thin, pure metal films, necessary for the formation of small metal particles on oxide supports. Reactions can be studied in flow mode and batch mode in a pressure range of 100-1200 mbar and temperatures up to 950 K. The setup provides a unique combination of sample preparation, characterization, and in situ experiments where the structure and reactivity of both single crystals and supported nanoparticles can be simultaneously determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Liquid crystal films as on-demand, variable thickness (50–5000 nm) targets for intense lasers

We have developed a new type of target for intense laser-matter experiments that offers significant advantages over those currently in use. The targets consist of a liquid crystal film freely suspended within a metal frame. They can be formed rapidly on-demand with thicknesses ranging from nanometers to micrometers, where the particular value is determined by the liquid crystal temperature and initial volume as well as by the frame geometry. The liquid crystal used for this work, 8CB (4′-octyl-4-cyanobiphenyl), has a vapor pressure below 10{sup −6} Torr, so films made at atmospheric pressure maintain their initial thickness after pumping to high vacuum. Additionally, the volume per film is such that each target costs significantly less than one cent to produce. The mechanism of film formation and relevant physics of liquid crystals are described, as well as ion acceleration data from the first shots on liquid crystal film targets at the Ohio State University Scarlet laser facility.

36 MATERIALS SCIENCE↗

The ReactorSTM: Atomically resolved scanning tunneling microscopy under high-pressure, high-temperature catalytic reaction conditions

To enable atomic-scale observations of model catalysts under conditions approaching those used by the chemical industry, we have developed a second generation, high-pressure, high-temperature scanning tunneling microscope (STM): the ReactorSTM. It consists of a compact STM scanner, of which the tip extends into a 0.5 ml reactor flow-cell, that is housed in a ultra-high vacuum (UHV) system. The STM can be operated from UHV to 6 bars and from room temperature up to 600 K. A gas mixing and analysis system optimized for fast response times allows us to directly correlate the surface structure observed by STM with reactivity measurements from a mass spectrometer. The in situ STM experiments can be combined with ex situ UHV sample preparation and analysis techniques, including ion bombardment, thin film deposition, low-energy electron diffraction and x-ray photoelectron spectroscopy. The performance of the instrument is demonstrated by atomically resolved images of Au(111) and atom-row resolution on Pt(110), both under high-pressure and high-temperature conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Methods and preliminary measurement results of liquid Li wettability

A test of lithium wettability was performed in high vacuum (< 3 × 10{sup −4} Pa). High magnification images of Li droplets on stainless steel substrates were produced and processed using the MATLAB{sup ®} program to obtain clear image edge points. In contrast to the more standard “θ/2” or polynomial fitting methods, ellipse fitting of the complete Li droplet shape resulted in reliable contact angle measurements over a wide range of contact angles. Using the ellipse fitting method, it was observed that the contact angle of a liquid Li droplet on a stainless steel substrate gradually decreased with increasing substrate temperature. The critical wetting temperature of liquid Li on stainless steel was observed to be about 290 °C.

36 MATERIALS SCIENCE↗

A Priori Tame Estimates in Sobolev Spaces for the Plasma–Vacuum Interface Problem

We study the free boundary problem for the plasma–vacuum interface in the case where the plasma density is strictly positive up to the boundary. For the linearized problem we derive the so-called tame estimates which can be used for proving the existence of solutions to the nonlinear problem by the Nash-Moser method.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a surface conductivity measurement system for ultrahigh vacuum transmission electron microscope

The surface conductivity measurement system using a micro-four-point probe (M4PP) had been developed for the ultrahigh vacuum transmission electron microscope (UHV-TEM). Since the current distribution in the sample crystals during the current voltage measurement by the M4PP is localized within the depth of several micrometers from the surface, the system is sensitive to the surface conductivity, which is related with the surface superstructure. It was installed in the main chamber of the TEM and the surface conductivity can be measured in situ. The surface structures were observed by reflection electron microscopy and diffraction (REM-RHEED). REM-RHEED enables us to observe the surface superstructures and their structure defects such as surface atomic steps and domain boundaries of the surface superstructure. Thus the effects of the defects on the surface conductivity can be investigated. In the present paper we present the surface conductivity measurement system and its application to the Si(111)-{radical}(3)x{radical}(3)-Ag surface prepared on the Si(111) vicinal surfaces. The result clearly showed that the surface conductivity was affected by step configuration.

36 MATERIALS SCIENCE↗

An ultra-low energy (30-200 eV) ion-atomic beam source for ion-beam-assisted deposition in ultrahigh vacuum

The paper describes the design and construction of an ion-atomic beam source with an optimized generation of ions for ion-beam-assisted deposition under ultrahigh vacuum (UHV) conditions. The source combines an effusion cell and an electron impact ion source and produces ion beams with ultra-low energies in the range from 30 eV to 200 eV. Decreasing ion beam energy to hyperthermal values ({approx_equal}10{sup 1} eV) without loosing optimum ionization conditions has been mainly achieved by the incorporation of an ionization chamber with a grid transparent enough for electron and ion beams. In this way the energy and current density of nitrogen ion beams in the order of 10{sup 1} eV and 10{sup 1} nA/cm{sup 2}, respectively, have been achieved. The source is capable of growing ultrathin layers or nanostructures at ultra-low energies with a growth rate of several MLs/h. The ion-atomic beam source will be preferentially applied for the synthesis of GaN under UHV conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Refined tip preparation by electrochemical etching and ultrahigh vacuum treatment to obtain atomically sharp tips for scanning tunneling microscope and atomic force microscope

A modification of the common electrochemical etching setup is presented. The described method reproducibly yields sharp tungsten tips for usage in the scanning tunneling microscope and tuning fork atomic force microscope. In situ treatment under ultrahigh vacuum (p {<=}10{sup -10} mbar) conditions for cleaning and fine sharpening with minimal blunting is described. The structure of the microscopic apex of these tips is atomically resolved with field ion microscopy and cross checked with field emission.

36 MATERIALS SCIENCE↗

Preparation and characterization of Ni(111)/graphene/Y{sub 2}O{sub 3}(111) heterostructures

Integration of graphene with other materials by direct growth, i.e., not using mechanical transfer procedures, is investigated on the example of metal/graphene/dielectric heterostructures. Such structures may become useful in spintronics applications using graphene as a spin-filter. Here, we systematically discuss the optimization of synthesis procedures for every layer of the heterostructure and characterize the material by imaging and diffraction methods. 300 nm thick contiguous (111) Ni-films are grown by physical vapor deposition on YSZ(111) or Al{sub 2}O{sub 3}(0001) substrates. Subsequently, chemical vapor deposition growth of graphene in ultra-high vacuum (UHV) is compared to tube-furnace synthesis. Only under UHV conditions, monolayer graphene in registry with Ni(111) has been obtained. In the tube furnace, mono- and bilayer graphene is obtained at growth temperatures of {approx}800 Degree-Sign C, while at 900 Degree-Sign C, non-uniform thick graphene multilayers are formed. Y{sub 2}O{sub 3} films grown by reactive molecular beam epitaxy in UHV covers the graphene/Ni(111) surface uniformly. Annealing to 500 Degree-Sign C results in crystallization of the yttria with a (111) surface orientation.

36 MATERIALS SCIENCE↗