Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROCESS DEVELOPMENT UNITS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

R&D with NREL's Thermal and Catalytic Process Development Unit (TCPDU)

The Thermal and Catalytic Process Development Unit (TCPDU) at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. The TCPDU is NREL's largest thermochemical reactor system, evaluating up to a half ton of biomass per day for thermal deconstruction and catalytic conversion processes. This fact sheet summarizes the capabilities of this reactor system.

09 BIOMASS FUELS↗

Fast Pyrolysis Process Development Unit for Validating Bench Scale Data

The purpose of this project was to prepare and operate a fast pyrolysis process development unit (PDU) that can validate experimental data generated at the bench scale. In order to do this, a biomass preparation system, a modular fast pyrolysis fluidized bed reactor, modular gas clean-up systems, and modular bio-oil recovery systems were designed and constructed. Instrumentation for centralized data collection and process control were integrated. The bio-oil analysis laboratory was upgraded with the addition of analytical equipment needed to measure C, H, O, N, S, P, K, and Cl. To provide a consistent material for processing through the fluidized bed fast pyrolysis reactor, the existing biomass preparation capabilities of the ISU facility needed to be upgraded. A stationary grinder was installed to reduce biomass from bale form to 5-10 cm lengths. A 25 kg/hr rotary kiln drier was installed. It has the ability to lower moisture content to the desired level of less than 20% wt. An existing forage chopper was upgraded with new screens. It is used to reduce biomass to the desired particle size of 2-25 mm fiber length. To complete the material handling between these pieces of equipment, a bucket elevator and two belt conveyors must be installed. The bucket elevator has been installed. The conveyors are being procured using other funding sources. Fast pyrolysis bio-oil, char and non-condensable gases were produced from an 8 kg/hr fluidized bed reactor. The bio-oil was collected in a fractionating bio-oil collection system that produced multiple fractions of bio-oil. This bio-oil was fractionated through two separate, but equally important, mechanisms within the collection system. The aerosols and vapors were selectively collected by utilizing laminar flow conditions to prevent aerosol collection and electrostatic precipitators to collect the aerosols. The vapors were successfully collected through a selective condensation process. The combination of these two mechanisms has created the ability to effectively fractionate the bio-oil into distinct fractions with improved characteristics. The fractions of bio-oil each contained different properties. Bio-oil properties that were improved included the energy content, water content, acid content and distribution of certain carbohydrates (levoglucosan and acetic acid). The improved properties that are associated with the fractionated bio-oil could allow bio-oil to be used in new markets, preferably without further upgrading. The decreased water and acid contents in the first four (of five) fractions could allow for easier upgrading of the bio-oil into transportation fuels or other valuable products. Char and solid particulate content of bio-oil must be minimized. Solid particulate can erode surfaces, leading to decreased equipment and component life and increased maintenance. Char can contribute to the instability of bio-oil by acting as a catalyst and causing secondary reactions. To continuously remove char from the pyrolysis reactor product stream, two cyclonic gas separators (cyclones) were designed and constructed. The design of the two gas cyclones was based on gas flow rate, particulate density, desired efficiency and desired pressure drop.

09 BIOMASS FUELS↗

Syngas to Synfuels Process Development Unit Final Scientific/Technical Report

The process described is for the gasification of 20 kg/h of biomass (switchgrass) to produce a syngas suitable for upgrading to Fischer-Tropsch (FT) liquid fuels (gas, diesel, waxes, etc.). The gas stream generated from gasification is primarily composed of carbon monoxide (CO), hydrogen (H 2 ), carbon dioxide (CO 2 ), steam (H 2 O), and methane (CH 4 ), but also includes tars, particulate matter, ammonia (NH 3 ), hydrogen cyanide (HCN), hydrogen chloride (HCl), hydrogen sulfide ( H 2 S), carbonyl sulfide (COS), etc. as contaminants. The gas stream passes through an array of cleaning devices to remove the contaminants to levels suitable for FT synthesis of fuels/chemicals. These devices consist primarily of an oil scrubber (to remove tars and remaining particulates), sulfur scrubber (to remove sulfur compounds), and a wet scrubber (to remove NH 3 , HCl and remaining water soluble contaminants). The ammonia and oil scrubbers are absorption columns with a combination of random and structured packing materials, using water and oil as the adsorption liquids respectively. The ammonia scrubber performed very well, while operating the oil scrubber proved to be more difficult due to the nature of tar compounds. The sulfur scrubber is a packed bed absorption device with solid extrudates of adsorbent material, primarily composed of ZnO and CuO. It performed well, but over a limited amount of time due to fouling created by excess tar/particulate matter and oil aerosols. Overall gas contaminants were reduced to below 1 ppm NH 3 , and less than 1 ppm collective sulfur compounds.

10 SYNTHETIC FUELS↗

Design and construction of coal/biomass to liquids (CBTL) process development unit (PDU) at the University of Kentucky Center for Applied Energy Research (CAER)

This report describes a first phase of a project to design, construct and commission an integrated coal/biomass-to-liquids facility at a capacity of 1 bbl. /day at the University of Kentucky Center for Applied Energy Research (UK-CAER) – specifically for construction of the building and upstream process units for feed handling, gasification, and gas cleaning, conditioning and compression. The deliverables from the operation of this pilot plant [when fully equipped with the downstream process units] will be firstly the liquid FT products and finished fuels which are of interest to UK-CAER’s academic, government and industrial research partners. The facility will produce research quantities of FT liquids and finished fuels for subsequent Fuel Quality Testing, Performance and Acceptability. Moreover, the facility is expected to be employed for a range of research and investigations related to: Feed Preparation, Characteristics and Quality; Coal and Biomass Gasification; Gas Clean-up/ Conditioning; Gas Conversion by FT Synthesis; Product Work-up and Refining; Systems Analysis and Integration; and Scale-up and Demonstration. Environmental Considerations - particularly how to manage and reduce carbon dioxide emissions from CBTL facilities and from use of the fuels - will be a primary research objectives. Such a facility has required significant lead time for environmental review, architectural/building construction, and EPC services. UK, with DOE support, has advanced the facility in several important ways. These include: a formal EA/FONSI, and permits and approvals; construction of a building; selection of a range of technologies and vendors; and completion of the upstream process units. The results of this project are the FEED and detailed engineering studies, the alternate configurations and the as-built plant - its equipment and capabilities for future research and demonstration and its adaptability for re-purposing to meet other needs. These are described in some detail in this report, along with lessons learned.

01 COAL, LIGNITE, AND PEAT↗

TeraChem: Accelerating electronic structure and ab initio molecular dynamics with graphical processing units

Developed over the past decade, TeraChem is an electronic structure and ab initio molecular dynamics software package designed from the ground up to leverage graphics processing units (GPUs) to perform large-scale ground and excited state quantum chemistry calculations in the gas and the condensed phase. TeraChem’s speed stems from the reformulation of conventional electronic structure theories in terms of a set of individually optimized high-performance electronic structure operations (e.g., Coulomb and exchange matrix builds, one- and two-particle density matrix builds) and rank-reduction techniques (e.g., tensor hypercontraction). Recent efforts have encapsulated these core operations and provided language-agnostic interfaces. Finally, this greatly increases the accessibility and flexibility of TeraChem as a platform to develop new electronic structure methods on GPUs and provides clear optimization targets for emerging parallel computing architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-Situ Statistical Analysis of Autotune Simulation Data using Graphical Processing Units

Developing accurate building energy simulation models to assist energy efficiency at speed and scale is one of the research goals of the Whole-Building and Community Integration group, which is a part of Building Technologies Research and Integration Center (BTRIC) at Oak Ridge National Laboratory (ORNL). The aim of the Autotune project is to speed up the automated calibration of building energy models to match measured utility or sensor data. The workflow of this project takes input parameters and runs EnergyPlus simulations on Oak Ridge Leadership Computing Facility’s (OLCF) computing resources such as Titan, the world’s second fastest supercomputer. Multiple simulations run in parallel on nodes having 16 processors each and a Graphics Processing Unit (GPU). Each node produces a 5.7 GB output file comprising 256 files from 64 simulations. Four types of output data covering monthly, daily, hourly, and 15- minute time steps for each annual simulation is produced. A total of 270TB+ of data has been produced. In this project, the simulation data is statistically analyzed in-situ using GPUs while annual simulations are being computed on the traditional processors. Titan, with its recent addition of 18,688 Compute Unified Device Architecture (CUDA) capable NVIDIA GPUs, has greatly extended its capability for massively parallel data processing. CUDA is used along with C/MPI to calculate statistical metrics such as sum, mean, variance, and standard deviation leveraging GPU acceleration. The workflow developed in this project produces statistical summaries of the data which reduces by multiple orders of magnitude the time and amount of data that needs to be stored. These statistical capabilities are anticipated to be useful for sensitivity analysis of EnergyPlus simulations

accelerators↗

Performance of a Dual Fluidized Bed Reactor for Chemical Looping Combustion with Oxygen Uncoupling

Chemical looping with oxygen uncoupling (CLOU) is a variant of chemical looping combustion which uses as fluidized bed particles specific solid oxygen carriers which readily liberate gaseous oxygen (O2) in the fuel reactor. This enables much more efficient combustion of solid fuels such as coal than conventional chemical looping combustion, which relies on in situ gasification of char in to produce syngas that can react heterogeneously with the solid oxygen carrier. The CLOU process for coal is an especially interesting application of fluidized bed technology since several types of reactions take place within the reactors. For copper-based oxygen carrier particles, the copper cycles between cuprous and cupric oxide (Cu2O + ½ O2 ↔ 2 CuO). Volatiles released from coal during pyrolysis may react with oxidized copper or with released oxygen gas. Char reacts primarily with released oxygen. Balancing oxygen supply to the fuel reactor, heat generation and temperatures and global and internal circulation rates is a challenge. The University of Utah has been researching CLOU technology for 10 years, studying fundamental reaction kinetics for copper-based CLOU oxygen carriers, performing lab- and bench-scale experiments in single and dual fluidized beds, and developing reactor models through computational fluid dynamic modeling using Barracuda VR™. Recently the university began testing a 200 kWth dual circulating fluidized bed process development unit (PDU) for processing coal. The design process for that reactor, reactor simulations, operational experience and practical challenges of the PDU system are presented.

Whitty, Kevin J.↗

Degradation of Components After Exposure in a Biomass Pyrolysis System

X-ray diffraction, electron probe microanalysis, and scanning transmission electron microscopy with focused ion beam lift-out sample preparation techniques were used to study corrosion products in a 304L (UNS S30403) stainless steel fluidized-bed reactor segment from Iowa State University’s Pyrolysis Process Development Unit Facility. This reactor segment is particularly valuable because a detailed history of operation time, temperature, and biomass feedstock was available. As previously reported for a range of stainless steel pyrolysis-related equipment, external scaling and internal attack along alloy grain boundaries were observed. Here, the scaling was primarily associated with O, although S, Ca, K, Si, Mg, and P were also detected in the outer scale regions. However, unlike those other recent advanced characterization analyses, in this instance the internal alloy grain boundary attack was not directly related to S. Rather, only internal oxidation and localized nanoporosity were observed along the alloy grain boundaries, with associated local nanoscale Cr depletion and Ni enrichment. Mechanistic implications of this finding are discussed.

36 MATERIALS SCIENCE↗

Computational simulation of a 100 kW dual circulating fluidized bed reactor processing coal by chemical looping with oxygen uncoupling

Chemical looping with oxygen uncoupling (CLOU) is a promising carbon capture technology that utilizes two interconnected fluidized-bed reactors to separate oxygen from air using a metal oxide, and then to use that oxygen to combust fuel in a nitrogen-free environment. CLOU is particularly well suited for solid fuels such as coal since released O 2 will readily combust with solid char. This study presents simulations of the University of Utah's dual fluidized bed chemical looping process development unit (PDU) operating as a CLOU system at 100 kW th , using CPFD Software's Barracuda-VR™ CFD modeling program. A full 3D model of the PDU was used including both reactors, as well as loop seals and cyclone separators. Hydrodynamic settings and the drag model are based on previous cold-flow validation experiments. Mechanisms describing CLOU reaction kinetics for cuprous oxide oxidation in the air reactor and cupric oxide reduction in the fuel reactor were adapted from previously completed experimental work. Coal char kinetics were based on the carbon-hydrogen-nitrogen-oxygen-sulfur, CHNOS, method. Submodels for devolatilization, gasification, and homogenous gas-phase reactions used relationships from the literature. Results predict volatile burnout almost immediately, though coal combustion continues into the upper portions of the fuel reactor and cyclone. Lastly, nitrogen gas leakage into the fuel reactor is shown to be mostly carryover from the air reactor

42 ENGINEERING↗

Alstom's Chemical Looping Combustion Prototype for CO 2 Capture from Existing Pulverized Coal-Fired Power Plants

Alstom’s Limestone Chemical Looping (LCL™) process has the potential to capture CO 2 from new and existing coal-fired power plants while maintaining high plant power generation efficiency. This new power plant concept is based on a hybrid combustion- gasification process utilizing high temperature chemical and thermal looping technology. This process could also be potentially configured as a hybrid combustion-gasification process producing a syngas or hydrogen for various applications while also producing a separate stream of CO 2 for use or sequestration. The targets set for this technology is to capture over 90% of the total carbon in the coal at cost of electricity which is less than 20% greater than Conventional PC or CFB units. Previous work with bench scale test and a 65 kWt Process Development Unit Development (PDU) has validated the chemistry required for the chemical looping process and provided for the investigation of the solids transport mechanisms and design requirements. The objective of this project is to continue development of the combustion option of chemical looping (LCL-C™) by designing, building and testing a 3 MWt prototype facility. The prototype includes all of the equipment that is required to operate the chemical looping plant in a fully integrated manner with all major systems in service. Data from the design, construction, and testing will be used to characterize environmental performance, identify and address technical risks, reassess commercial plant economics, and develop design information for a demonstration plant planned to follow the proposed Prototype. A cold flow model of the prototype will be used to predict operating conditions for the prototype and help in operator training. Operation of the prototype will provide operator experience with this new technology and performance data of the LCL-C™ process, which will be applied to the commercial design and economics and plan for a future demonstration plant.

20 FOSSIL-FUELED POWER PLANTS↗

R&D with NREL's 2'' Fluidized Bed Reactor (2FBR) Systems; R&D with the NREL Research Gasifier (NRG)

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the 2 Inch Fluidized Bed Reactor, a versatile lab-scale thermal processing and catalytic upgrading system to evaluate the conversion of renewable and waste feedstocks into fuels and chemicals. In addition, the NREL Research Gasifier is a lab-scale gasification system, perfectly suited to study the conversion of biomass and waste streams to purified syngas. This fact sheet summarizes the capabilities of both systems.

09 BIOMASS FUELS↗

R&D With NREL's Fuel Synthesis Catalysis Laboratory (FSCL)

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the Fuel Synthesis Catalysis Laboratory, a purpose-built facility designed for evaluating the performance of heterogeneous catalysts in converting biomass intermediates and waste streams into chemicals and fuels. This fact sheet summarizes the capabilities of this laboratory.

09 BIOMASS FUELS↗

NREL's Capabilities in Bio-Oil Characterization

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the capability to provide reliable analyses for biomass-derived liquids produced from thermochemical conversion, such as pyrolysis bio-oils. This fact sheet summarizes the standardized analytical methods that provide chemical information on bio-oil samples.

09 BIOMASS FUELS↗

NREL's Capabilities in Techno-Economic and Sustainability Analyses for Thermal and Catalytic Conversion of Biomass and Waste Feedstocks

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the capability to integrate experimental results with detailed process models to estimate biomass conversion costs. This fact sheet summarizes the core capabilities and applications.

09 BIOMASS FUELS↗

NREL'S Capabilities in Catalyst Development and Characterization

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the capability to understand structure-performance relationships for advanced catalytic materials to enable improved carbon yield and reduced costs for the targeted conversion of renewable feedstocks. This fact sheet summarizes the core capabilities and applications.

09 BIOMASS FUELS↗

NREL's Capabilities in Modeling and Simulation of Thermal and Catalytic Conversion Processes

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility NREL's thermal and catalytic simulation and modeling team integrates experimental and computational capabilities to address the complexities of real biomass and waste streams, enabling development of renewable energy technologies. This fact sheet summarizes the core capabilities and applications.

09 BIOMASS FUELS↗

Pyrolysis Oil Stabilization: Hot-Gas Filtration (CRADA Final Report)

The hypothesis that was tested in this task was that separation of char, with its associated mineral matter from pyrolysis vapors before condensation, will lead to improved oil quality and stability with respect to storage and transportation. The metric used to evaluate stability in this case was a 10-fold reduction in the rate of increase of viscosity as determined by ASTM D445 (the accelerated aging test). The primary unit operation that was investigated for this purpose was hot-gas filtration. A custom-built heated candle filter system was fabricated by the Pall Corporation and furnished to NREL for this test campaign. This system consisted of a candle filter element in a containment vessel surrounded by heating elements on the external surface of the vessel. The filter element and housing were interfaced to NREL’s existing 0.5 MTD pyrolysis Process Development Unit (PDU). For these tests the pyrolysis reactor of the PDU was operated in the entrained-flow mode. The HGF test stand was installed on a slipstream from the PDU so that both hot-gas filtered oil and bio-oil that was not hot-gas filtered could be collected for purposes of comparison. Two filter elements from Pall were tested: 1) porous stainless steel (PSS) sintered metal powder; 2) sintered ceramic powder. An extremely sophisticated bio-oil condensation and collection system was designed and fabricated at NREL and interfaced to the filter unit.

09 BIOMASS FUELS↗

Acid and heat stable enzymes for economical fuel production from biomass

CinderBio’s vision is to harness three billion years of biology to transform many industrial practices into sustainable processes with superior performance. Environments such as volcanic hot springs have evolved extremophilic microbes and enzymes that are naturally heat and acid stable. CinderBio was founded based on technologies developed at Lawrence Berkeley National Laboratory. Our core technologies are the molecular tools and know how to efficiently express extremophilic genes in an extremophilic host such that they retain their natural heat and acid stability. During this project, we tested our enzymes at the Advanced Biofuels and Bioproducts Process Development Unit (ABPDU), automated our fermentation and downstream processing, and built a comprehensive technoeconomic assessment (TEA) model for our manufacturing costs.

09 BIOMASS FUELS↗