Search NASA⌕ Search

SEARCH · Search NASA

Results for “Parafoil”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

An Overview of the Guided Parafoil System Derived from X-38 Experience

The NASA Johnson Space Center built a 4200 sq ft parafoil for the U.S. Army Natick Soldier Center to demonstrate autonomous flight using a guided parafoil system to deliver 10,000 lbs of useable payload. The parafoil's design was based upon that developed during the X-38 program. The drop test payload consisted of a standard 20-foot Type V airdrop platform, a standard 12-foot weight tub, a 60 ft drogue parachute, a 4200 ft2 parafoil, an instrumentation system, and a Guidance, Navigation, and Control (GN&C) system. Instrumentation installed on the load was used to gather data to validate simulation models and preflight loads predictions and to perform post flight trajectory and performance reconstructions. The GN&C system, developed during NASA's X-38 program, consisted of a flight computer, modems for uplink commands and downlink data, a compass, laser altimeter, and two winches. The winches were used to steer the parafoil and to perform the dynamic flare maneuver for a soft landing. The laser was used to initiate the flare. The GN&C software was originally provided to NASA by the European Space Agency. NASA incorporated further software refinements based upon the X-38 flight test results. Three full-scale drop tests were conducted, with the third being performed during the Precision Airdrop Technology Conference and Demonstration (PATCAD) Conference at the U.S. Army Yuma Proving Ground (YPG) in November of 2003. For the PATCAD demonstration, the parafoil and GN&C software and hardware performed well, concluding with a good flare and the smallest miss distance ever experienced in NASA's parafoil drop test program. This paper describes the 4200 sq ft parafoil system, simulation results, and the results of the drop tests.

Stein, Jenny M.↗
NASA NTRS2000

Design and Testing of the X-38 Spacecraft Primary Parafoil

In August of 1995 the NASA began testing large ram-air parafoils for potential use in the landing phase of spacecraft recovery. This effort eventually became a part of the X-38 project, a technology demonstrator for the International Space Station Emergency Crew Return Vehicle. This paper traces how the original parafoil, used in the U.S. Army Graded Precision Air Delivery System (GPADS), was modified to improve the initial deployment dynamics. A discussion of how test experience with 750 sq ft parafoils has been used to scale up to the full-scale 5500 sq ft and 7500 sq ft parafoils is presented. In particular, the development of two techniques that have greatly improved the repeatability of the parafoil initial deployment and decreased the first stage deployment dynamics are discussed: a first stage upper surface energy modulator and floor vents. Comparisons of trends and results from the various scale parachutes are presented as well as constraints that at times have driven the direction that the design has taken.

DESIGN OPTIMIZATION↗
NASA NTRS2001

The Analysis and Modeling of the Deployment of NASA's X-38 Parafoil

NASA is currently working on developing the X-38 Crew Return Vehicle for the Internati6nal Space Station (ISS). The aerodynamics of the X-38 and its enormous 7500 square ft parafoil are extremeJy complicated and must be understood and modeled accurately before the vehicle is actually used for human space flight. A large amount of analysis has been performed on the steady state regions of the flight profile when the parafoil is already open. However, the deployment region of the flight profile has not been analyzed in much depth and is a particularly complicated dynamic flight period. During deployment, the X-38 system has its parafoil open up to its full area in five stages over a period of 20-30 seconds. The vehicle transitions from angles of attack around 90 deg to 0 deg in about two seconds and is extremely dynamic. This paper will detail the analysis work done to generate accurate flight profile characteristics of the deployment from flight data from vehicle test drops. Additionally, a computer simulation tool for steady state flight was modified to analyze and model the parafoil deployment. Eventually, a computer model was produced that generated accurate representations of the parafoil deployment dynamics for the vehicle test drops to date.

Ranier, Chris↗
NASA NTRS2000

Simulators for the X-38/CRV Parafoil and Re-Entry Phases

The X38/CRV is unique in several aspects: it does not afford the pilot a forward view through a window and it utilizes a parafoil in the final landing flight phase. As a result of some of these unique attributes the prototype on-board displays will need to provide enhanced situation awareness to aid a crew member in supervising the onboard GNC software to select a landing site, and possible obstacle avoidance during the final flight phase. In the ESA/ESTEC visualization prototype system the scene is visualized using MultiGen OpenFlight models on high-end SGI machines. The Parafoil Guidance Navigation and Control (PGNC) algorithms are being developed as a joint NASA/ESA venture. These algorithms will be used onboard the vehicle to create nominal flight trajectories for the vehicle to follow. These same algorithms are also used as parafoil simulators in our augmented situation awareness system we are developing. The output of the parafoil simulator is displayed on a Windows-based computer running the LandForm FlightVision software. The FlightVision software is used to create the synthetic environment displays and all the necessary HUD symbology. Maps, such as aeronautical charts, as well as satellite imagery are optionally overlaid on the 3D-terrain model to provide additional situation awareness for the crew.

SITUATIONAL AWARENESS↗
NASA NTRS2007

Design, Development & Flight Testing Of The U.S. Army 4200 sq ft Parafoil Recovery System

The purpose of this paper is to describe the design, development and flight testing of the U.S. Army 4200 ft(sup 2) parafoil recovery system built under NASA Contract NAS9-00076. The 4200 ft(sup 2) parafoil described herein was a potential candidate to fulfill the U.S. Army requirement for a 10,000 lb useable payload precision guided recovery system. Design heritage as well as specific features, like lower surface inlets, confluence fitting, upper surface energy modulator design, deployment bag design and 60 ft diameter Ringslot drogue will be discussed. Initial flight test results, ground testing of various components to verify design margin and configuration changes will also be discussed. The 4200 ft(sup 2) parafoil recovery system completed three flight tests during 2003 at payload weights of over 15,000 lbs.

Bennett, Thomas W.↗
NASA NTRS2005

Design, Development and Flight Testing of the U.S. Army 4200 sq ft Parafoil Recovery System

The purpose of this paper is to describe the design, development and flight-testing of the U.S. Army 4200 sq ft parafoil recovery system built under NASA Contract NAS 9-00076. The 4200 f? parafoil described herein was a potential candidate to fulfill the U.S. Army requirement for a 10,000 lb useable payload precision guided recovery system. Design heritage as well as specific features, like lower surface inlets, confluence fitting, upper surface energy modulator design, deployment bag design and 60 ft diameter Ringslot drogue will be discussed. Initial flight test results, ground testing of various components to verify design margin and configuration changes will also be discussed. The 4200 sq ft parafoil recovery system completed three flight tests during 2003 at payload weights of over 15,000 Ibs

Bennett, Thomas W.↗
NASA NTRS2001

Testing Status of the X-38 Large Parafoil Autonomous GN and C System

This paper shall review the status, progress and results made in testing of the GN&C software and supporting avionics designed for the control of a large parafoil in support of the X-38 Program. This will include a high level overview of the GN&C design selected for use on the X-38 orbital return test article, as well as an overview of the requirements and test objectives for the parafoil flight portion of the orbital return flight, and of the testing results to date. These flight objectives will be mapped into flight and ground testing requirements and test beds currently in use by the X-38 Program, building sufficient confidence in the selected parafoil GN&C system, in order to proceed with the flight of the orbital test article. The X-38 Program itself is a NASA led technology development and demonstration program with its premier goal being the development and orbital return flight test of an emergency Crew Return Vehicle (CRV) prototype for the International Space Station.

Strahan, Alan↗
NASA NTRS1991

A two camera video imaging system with application to parafoil angle of attack measurements

This paper describes the development of a two-camera, video imaging system for the determination of three-dimensional spatial coordinates from stereo images. This system successfully measured angle of attack at several span-wise locations for large-scale parafoils tested in the NASA Ames 80- by 120-Foot Wind Tunnel. Measurement uncertainty for angle of attack was less than 0.6 deg. The stereo ranging system was the primary source for angle of attack measurements since inclinometers sewn into the fabric ribs of the parafoils had unknown angle offsets acquired during installation. This paper includes discussions of the basic theory and operation of the stereo ranging system, system measurement uncertainty, experimental set-up, calibration results, and test results. Planned improvements and enhancements to the system are also discussed.

Meyn, Larry A.↗
NASA NTRS1994

Further development and flight test of an autonomous precision landing system using a parafoil

NASA Dryden Flight Research Center and NASA Johnson Space Center are jointly conducting a phased program to determine the feasibility of the autonomous recovery of a spacecraft using a ram-air parafoil system for the final stages of entry from space to a precision landing. The feasibility is being studied using a flight model of a spacecraft in the generic shape of a flattened biconic that weighs approximately 120 lb and is flown under a commercially available ram-air parafoil. Key components of the vehicle include the global positioning system (GPS) guidance for navigation, a flight control computer, an electronic compass, a yaw rate gyro, and an onboard data recorder. A flight test program is being used to develop and refine the vehicle. The primary flight goal is to demonstrate autonomous flight from an altitude of 3,000 m (10,000 ft) with a lateral offset of 1.6 km (1.0 mi) to a precision soft landing. This paper summarizes the progress to date. Much of the navigation system has been tested, including a heading tracker that was developed using parameter estimation techniques and a complementary filter. The autoland portion of the autopilot is still in development. The feasibility of conducting the flare maneuver without servoactuators was investigated as a means of significantly reducing the servoactuator rate and load requirements.

Murray, James E.↗
NASA NTRS1998

Low Speed Aerodynamics of the X-38 CRV

This project was performed in support of the engineering development of the NASA X-38 Crew Return Vehicle (CRV)system. Wind tunnel experiments were used to visualize various aerodynamic phenomena encountered by the CRV during the final stages of descent and landing. Scale models of the CRV were used to visualize vortex structures above and below the vehicle, and in its wake, and to quantify their trajectories. The effect of flaperon deflection on these structures was studied. The structure and dynamics of the CRV's wake during the drag parachute deployment stage were measured. Regions of high vorticity were identified using surveys conducted in several planes using a vortex meter. Periodic shedding of the vortex sheets from the sides of the CRV was observed using laser sheet videography as the CRV reached high angles of attack during the quasi-steady pitch-up prior to parafoil deployment. Using spectral analysis of hot-film anemometer data, the Strouhal number of these wake fluctuations was found to be 0.14 based on the model span. Phenomena encountered in flight test during parafoil operation were captured in scale-model tests, and a video photogrammetry technique was implemented to obtain parafoil surface shapes during flight in the tunnel. Forces on the parafoil were resolved using tension gages on individual lines. The temporal evolution of the phenomenon of leading edge collapse was captured. Laser velocimetry was used to demonstrate measurement of the porosity of the parafoil surface. From these measurements, several physical explanations have been developed for phenomena observed at various stages of the X-38 development program. Quantitative measurement capabilities have also been demonstrated for continued refinement of the aerodynamic technologies employed in the X-38 project. Detailed results from these studies are given in an AIAA Paper, two slide presentations, and other material which are given on a Web-based archival resource. This is the Digital Library of the Georgia Tech Experimental Aerodynamics Group.

Komerath, N. M.↗
NASA NTRS2005

Parachute Testing for the NASA X-38 Crew Return Vehicle

NASA's X-38 program was an in-house technology demonstration program to develop a Crew Return Vehicle (CRV) for the International Space Station capable of returning seven crewmembers to Earth when the Space Shuttle was not present at the station. The program, managed out of NASA's Johnson Space Center, was started in 1995 and was cancelled in 2003. Eight flights with a prototype atmospheric vehicle were successfully flown at Edwards Air Force Base, demonstrating the feasibility of a parachute landing system for spacecraft. The intensive testing conducted by the program included testing of large ram-air parafoils. The flight test techniques, instrumentation, and simulation models developed during the parachute test program culminated in the successful demonstration of a guided parafoil system to land a 25,000 Ib spacecraft. The test program utilized parafoils of sizes ranging from 750 to 7500 p. The guidance, navigation, and control system (GN&C) consisted of winches, laser or radar altimeter, global positioning system (GPS), magnetic compass, barometric altimeter, flight computer, and modems for uplink commands and downlink data. The winches were used to steer the parafoil and to perform the dynamic flare maneuver for a soft landing. The laser or radar altimeter was used to initiate the flare. In the event of a GPS failure, the software navigated by dead reckoning using the compass and barometric altimeter data. The GN&C test beds included platforms dropped from cargo aircraft, atmospheric vehicles released from a 8-52, and a Buckeye powered parachute. This paper will describe the test program and significant results.

Stein, Jenny M.↗
NASA NTRSDate not supplied

Method for Extracting Aerodynamic Coefficients and Winds On-the-Fly Using Real-Time GPS Data

The landing accuracy of an autonomous guided parafoil is influenced by its ability to predict the trajectory, which is shaped by the parafoil’s aerodynamic characteristics and atmospheric winds. The parafoil is subjective to imperfections from manufacturing, damage during deployment, lateral asymmetry, and so forth, leading to discrepancies between the actual aerodynamic properties and the onboard aerodynamic model. Thus, by acquiring an accurate knowledge of the aerodynamic properties and real-time winds, the onboard simulation can reduce the undertainties in the dynamics modeling for trajectory propagation to improve the landing accuracy. For that purpose, a non-linear least-squares method is developed to calculate differential corrections for optimizing and extracting the parafoil aerodynamic coefficients and winds on-the-fly using real-time data from the Global Positioning System (GPS). Post-flight analyses from two test flights have shown that the method provides improved simulations that closely match the GPS trajectories.

Lisa Ling↗
NASA NTRS2000

X-38 V-132 Free Flight 2 (This is a video tape)

Mr. Aldo Bordano will be presenting details of some of the JSC flight mechanics involvement in the X-38 testing program. Focus shall be on the parafoil system with regards its testing, performance analysis, and GN&C. An excellent example of a recent flight test at Dryden Flight Research Center shall be shown which portrays the system characteristics, sequencing, performance, and testing techniques. The intent is to inform the scientific and engineering communities about the developments in the X-38 parafoil program, as well as invite feedback on potential improvements in testing or systems.

Bordano, Aldo J.↗
NASA NTRS2016

Performance Efficient Launch Vehicle Recovery and Reuse

For decades, economic reuse of launch vehicles has been an elusive goal. Recent attempts at demonstrating elements of launch vehicle recovery for reuse have invigorated a debate over the merits of different approaches. The parameter most often used to assess the cost of access to space is dollars-per-kilogram to orbit. When comparing reusable vs. expendable launch vehicles, that ratio has been shown to be most sensitive to the performance lost as a result of enabling the reusability. This paper will briefly review the historical background and results of recent attempts to recover launch vehicle assets for reuse. The business case for reuse will be reviewed, with emphasis on the performance expended to recover those assets, and the practicality of the most ambitious reuse concept, namely propulsive return to the launch site. In 2015, United Launch Alliance (ULA) announced its Sensible, Modular, Autonomous Return Technology (SMART) reuse plan for recovery of the booster module for its new Vulcan launch vehicle. That plan employs a non-propulsive approach where atmospheric entry, descent and landing (EDL) technologies are utilized. Elements of such a system have a wide variety of applications, from recovery of launch vehicle elements in suborbital trajectories all the way to human space exploration. This paper will include an update on ULA's booster module recovery approach, which relies on Hypersonic Inflatable Aerodynamic Decelerator (HIAD) and Mid-Air Retrieval (MAR) technologies, including its concept of operations (ConOps). The HIAD design, as well as parafoil staging and MAR concepts, will be discussed. Recent HIAD development activities and near term plans including scalability, next generation materials for the inflatable structure and heat shield, and gas generator inflation systems will be provided. MAR topics will include the ConOps for recovery, helicopter selection and staging, and the state of the art of parachute recovery systems using large parafoils for space asset recovery and high altitude deployment. The next proposed HIAD flight demonstration is called HULA (for HIAD on ULA), and will feature a 6m diameter HIAD. An update for the HULA concept will be provided in this paper. As proposed, this demonstration will fly as a secondary payload on an Atlas mission. The Centaur upper stage provides the reentry pointing, deorbit burn, and entry vehicle spin up. The flight test will culminate with a recovery of the HIAD using MAR. HULA will provide data from a Low Earth Orbit (LEO) return aeroheating environment that enables predictive model correlation and refinement. The resultant reduction in performance uncertainties should lead to design efficiencies that are increasingly significant at larger scales. Relevance to human scale Mars EDL using a HIAD will also be presented, and the applicability of the data generated from both HULA and SMART Vulcan flights, and its value for NASA's human exploration efforts will be discussed. A summary and conclusion will follow.

Reed, John G.↗
NASA NTRS2019

Aero Maneuvering Dynamics and Control for Precision Landing on Titan

We have developed and tested several dynamic models of the parafoil system descending in Titan’s atmosphere. These dynamic models include a progression from point mass models to rigid multibody models, including relative dynamics between canopy and payload. In these models, we have included wind models used for Titan simulation, and extrapolated wind gust models previously used for simulation in the Martian environment. We have also developed guidance and control techniques to for autonomous parafoil turning in the adverse wind environment. Finally, and in order to improve the controller performance by reducing the uncertainty to environmental factors, we have also developed ways to estimate the Titan environmental parameters, i.e. the atmospheric density, and the wind magnitude, during the descent. A more complete and realistic simulation is being developed, which uses JPL’s DSENDS Entry, Descent, and Landing Software framework.

Ermolli, Luca↗
NASA NTRS2021

Convex Optimization Guidance for Precision Landing on Titan

Precision landing is an anticipated technology for future interplanetary missions. Autonomous spacecraft Entry, Descent and Landing (EDL) on the surface of a planetary body with a degree of precision in the order of meters is highly challenging. In this paper, a successive convexification guidance algorithm is utilized to simulate autonomous precision landing sequences on Saturn’s moon Titan. Due to its unique geophysical features, studying the science of matter within Titan’s atmosphere and beneath its surface is one of NASA’s most important planetary science objectives. As part of the Space Exploration Technology Directorate, a parafoil is proposed for landing on Titan due to its cost effectiveness, ease of deployment, low mass compared to the prospective payload and capabilities of precise autonomous delivery. This paper focuses on path optimization and guidance law development for high-fidelity dynamics parafoil tuning in the dense and adverse wind atmosphere of Titan, defined as a nonlinear and nonconvex optimal control problem. The powerful successive convexification method is used to solve the problem accordingly. The algorithm is designed such that the converged solution adheres to the nonlinear dynamics and kinematics in accordance with the original formulation, while respecting the state and control constraints. The six-degree-of-freedom (6DoF) simulations results show that this robust method is suitable for autonomous interplanetary applications.

Mooij, Edwin↗
NASA NTRS1994

Development and flight test of a deployable precision landing system

A joint NASA Dryden Flight Research Facility and Johnson Space Center program was conducted to determine the feasibility of the autonomous recovery of a spacecraft using a ram-air parafoil system for the final stages of entry from space that included a precision landing. The feasibility of this system was studied using a flight model of a spacecraft in the generic shape of a flattened biconic that weighed approximately 150 lb and was flown under a commercially available, ram-air parachute. Key elements of the vehicle included the Global Positioning System guidance for navigation, flight control computer, ultrasonic sensing for terminal altitude, electronic compass, and onboard data recording. A flight test program was used to develop and refine the vehicle. This vehicle completed an autonomous flight from an altitude of 10,000 ft and a lateral offset of 1.7 miles that resulted in a precision flare and landing into the wind at a predetermined location. At times, the autonomous flight was conducted in the presence of winds approximately equal to vehicle airspeed. Several novel techniques for computing the winds postflight were evaluated. Future program objectives are also presented.

TRT-EXPERIMENTAL↗