Results for “Parcel Delivery”

NASA NTRS2009

Parallel Hybrid Vehicle Optimal Storage System

A paper reports the results of a Hybrid Diesel Vehicle Project focused on a parallel hybrid configuration suitable for diesel-powered, medium-sized, commercial vehicles commonly used for parcel delivery and shuttle buses, as the missions of these types of vehicles require frequent stops. During these stops, electric hybridization can effectively recover the vehicle's kinetic energy during the deceleration, store it onboard, and then use that energy to assist in the subsequent acceleration.

Bloomfield, Aaron P.↗

NASA NTRS2017

UAV Trajectory Modeling Using Neural Networks

Large amount of small Unmanned Aerial Vehicles (sUAVs) are projected to operate in the near future. Potential sUAV applications include, but not limited to, search and rescue, inspection and surveillance, aerial photography and video, precision agriculture, and parcel delivery. sUAVs are expected to operate in the uncontrolled Class G airspace, which is at or below 500 feet above ground level (AGL), where many static and dynamic constraints exist, such as ground properties and terrains, restricted areas, various winds, manned helicopters, and conflict avoidance among sUAVs. How to enable safe, efficient, and massive sUAV operations at the low altitude airspace remains a great challenge. NASA's Unmanned aircraft system Traffic Management (UTM) research initiative works on establishing infrastructure and developing policies, requirement, and rules to enable safe and efficient sUAVs' operations. To achieve this goal, it is important to gain insights of future UTM traffic operations through simulations, where the accurate trajectory model plays an extremely important role. On the other hand, like what happens in current aviation development, trajectory modeling should also serve as the foundation for any advanced concepts and tools in UTM. Accurate models of sUAV dynamics and control systems are very important considering the requirement of the meter level precision in UTM operations. The vehicle dynamics are relatively easy to derive and model, however, vehicle control systems remain unknown as they are usually kept by manufactures as a part of intellectual properties. That brings challenges to trajectory modeling for sUAVs. How to model the vehicle's trajectories with unknown control system? This work proposes to use a neural network to model a vehicle's trajectory. The neural network is first trained to learn the vehicle's responses at numerous conditions. Once being fully trained, given current vehicle states, winds, and desired future trajectory, the neural network should be able to predict the vehicle's future states at next time step. A complete 4-D trajectory are then generated step by step using the trained neural network. Experiments in this work show that the neural network can approximate the sUAV's model and predict the trajectory accurately.

Neural Networks↗

NASA NTRSDate not supplied

Achieving Equilibrium for Dense, Integrated, Vehicle Navigation

Drone usage has proliferated in recent years with many applications that have market-changing potential. Applications that include parcel delivery, wildlife protection, precision farming, law enforcement, and industrial inspection, just to name a few. In this paper, the term drone is used to mean both Unmanned Aerial Vehicle and small Unmanned Aircraft System vehicles. Flight infrastructure can currently only support a few thousand aircraft flying over the United States National Airspace System (NAS) at any given time. A delay atone airport sends ripple effects through the system, causing more delays and missed connections. Once regulations and safety policies are put in place to allow for the widespread use of unmanned drones, the number of aircraft in the NAS is expected to skyrocket to millions, potentially congesting the airspace resulting in possible separation violations. In air traffic control, separation is the concept of keeping an “ownship” aircraft outside a minimum distance from “intruder” aircraft to reduce the risk of the aircraft colliding, as well as preventing accidents due to secondary factors, such as wake turbulence. Maintaining proper separation is a safety critical property for drones in the airspace. This paper addresses separation in time and in distance for high volume corridors (en-route) and lanes(on ground). The requirements and necessary conditions for maintaining proper separation and reaching maximum throughput for a given corridor/lane are addressed assuming unidirectional corridors/lanes where an aircraft arrives from one side and departs from the opposite side. Simulation results are presented that show the presented solution guarantees a set of drones to reach the equilibrium state by adjusting their speed based on their distance to the aircraft in front of them. The equilibrium state is defined as a state when a set of n aircraft moving at a relatively constant speed and uniform spacing from each other in a congested system. A congested system is defined as a state when the aircraft cannot move at their maximum allowed speed. Unlike existing centralized and pre-planned approaches, the proposed solution is fully distributed and enables autonomous aircraft to decide to adjust their speed and distance with respect to the preceding aircraft, dynamically. Simulation results are presented that assess the feasibility of the approach using a large number of drones and evaluate the scalability of the proposed solution.

Mahyar R. Malekpour↗

NASA NTRSDate not supplied

A Strategic Approach for Dense, Integrated, Vehicle Navigation

Drone usage has been on the rise in recent years with applications that include parcel delivery, wildlife protection, precision farming, law enforcement, and industrial inspection, just to name a few. Once regulations and safety policies are put in place to allow for the widespread use of unmanned drones, the number of aircraft in the National Airspace System (NAS) is expected to skyrocket to millions, potentially congesting the airspace which increases the likelihood of separation violations and possibly incidents. Currently, flight infrastructure can only support a few thousand aircraft flying over the United States National Airspace System (NAS) at any given time. A delay at one airport can send ripple effects throughout the system, causing more delays and missed connections. In air traffic control, separation is the concept of keeping an “ownship” aircraft outside a minimum distance from “intruder” aircraft to reduce the risk of the aircraft colliding, as well as preventing accidents due to secondary factors, such as wake turbulence. Maintaining proper separation is often a safety critical property for fixed-wing drones in the airspace. This paper addresses drone separation in time and distance for high volume corridors (en route) and lanes (on ground), merging as well as crossing intersections of multiple corridors/lanes. In this paper, the term drone is applied to both Unmanned Aerial Vehicle (UAV) and small Unmanned Aircraft System (UAS) vehicles operating autonomously. There exists a gamut of approaches to the merging and crossing problems. At one end of the extreme are the conservative yet low cost and verifiable solutions of today that deal with two drones at a time. At the other end are complex Machine Learning-based solutions with high computing requirements for fully autonomous drones of the future that are expected to handle all contentions. This paper presents a feasible and verifiable strategic approach to these problems that is based on distributed cooperation between the drones and the infrastructure. Three phases of the strategic approach (Prepare, Adjust, Commit) are presented. Simulation results are presented that show the proposed approach is stable and resilient to induced perturbations and guarantees a set of fixed-wing drones to merge and cross intersections by adjusting their speed based on their distance to the aircraft in front of them while remaining in the equilibrium state. The equilibrium state is defined as the state when a set of n aircraft move at a relatively constant speed and uniform spacing from each other in a congested system. A congested system is defined as the state when at least one aircraft cannot move at its maximum allowed speed. Unlike existing centralized and pre-planned approaches, the proposed solution is fully distributed and enables autonomous aircraft to decide to adjust their speed and distance with respect to the preceding aircraft, dynamically. Simulation results are presented that assess the feasibility of the approach.

Distributed↗

NASA NTRSDate not supplied

A Strategic Approach for Dense, Integrated, Vehicle Navigation

Drone usage has been on the rise in recent years with applications that include parcel delivery, wildlife protection, precision farming, law enforcement, and industrial inspection, just to name a few. Once regulations and safety policies are put in place to allow for the widespread use of unmanned drones, the number of aircraft in the National Airspace System (NAS) is expected to skyrocket to millions, potentially congesting the airspace which increases the likelihood of separation violations and possibly incidents. Currently, flight infrastructure can only support a few thousand aircraft flying over the United States National Airspace System (NAS) at any given time. A delay at one airport can send ripple effects throughout the system, causing more delays and missed connections. In air traffic control, separation is the concept of keeping an “ownship” aircraft outside a minimum distance from “intruder” aircraft to reduce the risk of the aircraft colliding, as well as preventing accidents due to secondary factors, such as wake turbulence. Maintaining proper separation is often a safety critical property for fixed-wing drones in the airspace. This paper addresses drone separation in time and distance for high volume corridors (en route) and lanes (on ground), merging as well as crossing intersections of multiple corridors/lanes. In this paper, the term drone is applied to both Unmanned Aerial Vehicle (UAV) and small Unmanned Aircraft System (UAS) vehicles operating autonomously. There exists a gamut of approaches to the merging and crossing problems. At one end of the extreme are the conservative yet low cost and verifiable solutions of today that deal with two drones at a time. At the other end are complex Machine Learning-based solutions with high computing requirements for fully autonomous drones of the future that are expected to handle all contentions. This paper presents a feasible and verifiable strategic approach to these problems that is based on distributed cooperation between the drones and the infrastructure. Three phases of the strategic approach (Prepare, Adjust, Commit) are presented. Simulation results are presented that show the proposed approach is stable and resilient to induced perturbations and guarantees a set of fixed-wing drones to merge and cross intersections by adjusting their speed based on their distance to the aircraft in front of them while remaining in the equilibrium state. The equilibrium state is defined as the state when a set of n aircraft move at a relatively constant speed and uniform spacing from each other in a congested system. A congested system is defined as the state when at least one aircraft cannot move at its maximum allowed speed. Unlike existing centralized and pre-planned approaches, the proposed solution is fully distributed and enables autonomous aircraft to decide to adjust their speed and distance with respect to the preceding aircraft, dynamically. Simulation results are presented that assess the feasibility of the approach.

Distributed↗

NASA NTRSDate not supplied

A Strategic Approach for Dense, Integrated, Vehicle Navigation

Drone usage has been on the rise in recent years with applications that include parcel delivery, wildlife protection, precision farming, law enforcement, and industrial inspection, just to name a few. This paper addresses drone separation in time and distance for high volume corridors (en route) and lanes (on ground), merging as well as crossing intersections of multiple corridors/lanes. There exists a gamut of approaches to solving merging and intersection crossing problems. At one end of the extreme are the conservative yet low cost and verifiable solutions of today that deal with two drones at a time. At the other end are complex Machine Learning-based solutions with high computing requirements for fully autonomous drones of the future that are expected to handle all contentions. This paper presents a feasible and verifiable strategic approach to solving these problems that is based on distributed cooperation between the UAVs/UASs and the infrastructure. Unlike existing centralized and pre-planned approaches, the proposed solution is fully distributed and enables autonomous aircraft to decide to adjust their speed and distance with respect to the preceding aircraft, dynamically. Three phases of the strategic approach (Prepare, Adjust, Commit) are presented. Simulation results are presented that show the proposed approach is stable and resilient to induced perturbations and guarantees a set of fixed-wing UAVs/UASs to merge and cross intersections by adjusting their speed based on their distance to the aircraft in front of them.

Distributed↗

NASA NTRS1992

Hermes CX-7: Air transport system design simulation

The Hermes CX-7 has been designed to service the overnight parcel package delivery needs of the cities of Aeroworld as determined in the G-Dome Enterprises market survey. The design optimization centers on the prime goal of servicing the needs of these cities as efficiently and profitably as possible. The greatest factors which affect the design of an aircraft for the mission outlined in the Request for Proposal are cost, construction feasibility and effectiveness of the design. Other influencing factors are given by the constraints of the market, including a maximum takeoff and landing distance of 60 feet, storage capability in a container of size 5 ft. x 3 ft. x 2 ft., cargo packages of 2 inch and 4 inch cubes, and ability to turn with a radius no larger than 60 feet. Safety considerations such as flying at or below Mach one (30 ft/s) and controllability and maintainability of the aircraft must also be designed into the aircraft. Another influential factor is the efficiency of the aircraft which involves optimizations and tradeoffs of such factors as weight, lifting surface sizing, structural redundancy, and material costs.

Amer, Brian↗

NASA NTRSDate not supplied

UAM Market Study - Technical Out Brief

The Urban Air Mobility (UAM) Market Study is an in-depth study for ODM market leveraging identified key technical barriers to understand community interests and market conditions from all aspects such as regulations, economics, public acceptance, airspace operations and safety.

Parcel Delivery↗

NASA NTRS2018

Urban Air Mobility (UAM) Market Study

The Urban Air Mobility (UAM) Market Study is an in-depth study for ODM market leveraging identified key technical barriers to understand community interests and market conditions from all aspects such as regulations, economics, public acceptance, airspace operations and safety.

Urban Air Mobility↗

NASA NTRS2018

Urban Air Mobility (UAM) Market Study

The Urban Air Mobility (UAM) Market Study is an in-depth study for ODM market leveraging identified key technical barriers to understand community interests and market conditions from all aspects such as regulations, economics, public acceptance, airspace operations and safety.

Urban Air Mobility Parcel Delivery Air Taxi Air Me↗

NASA NTRS2006

Projecting Future Urbanization with Prescott College's Spatial Growth Model to Promote Environmental Sustainability and Smart Growth, A Case Study in Atlanta, Georgia

Planning is an integral element of good management and necessary to anticipate events not merely respond to them. Projecting the quantity and spatial distribution of urban growth is essential to effectively plan for the delivery of city services and to evaluate potential environmental impacts. The major drivers of growth in large urban areas are increasing population, employment opportunities, and quality of life attractors such as a favorable climate and recreation opportunities. The spatial distribution of urban growth is dictated by the amount and location of developable land, topography, energy and water resources, transportation network, climate change, and the existing land use configuration. The Atlanta region is growing very rapidly both in population and the consumption of forestland or low-density residential development. Air pollution and water availability are significant ongoing environmental issues. The Prescott Spatial Growth Model (SGM) was used to make growth projections for the metropolitan Atlanta region to 2010,2020 and 2030 and results used for environmental assessment in both business as usual and smart growth scenarios. The Prescott SGM is a tool that uses an ESRI ArcView extension and can be applied at the parcel level or more coarse spatial scales and can accommodate a wide range of user inputs to develop any number of growth rules each of which can be weighted depending on growth assumptions. These projections were used in conjunction with meteorological and air quality models to evaluate future environmental impacts. This presentation will focus on the application of the SGM to the 13-County Atlanta Regional Commission planning jurisdiction as a case study. The SGM will be described, including how rule sets are developed and the decision process for allocation of future development to available land use categories. Data inputs required to effectively run the model will be discussed. Spatial growth projections for ten, twenty, and thirty year planning horizons will be presented and results discussed, including regional climate and air quality impacts.

Estes, Maurice G., Jr.↗