Search NASA⌕ Search

SEARCH · Search NASA

Results for “Partial equilibrium approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Composition and evolution of the eucrite parent body - Evidence from rare earth elements

Quantitative modeling of the evolution of rare earth element (REE) abundances in the eucrites, which are plagioclase-pigeonite basalt achondrites, indicates that the main group of eucrites (e.g., Juvinas) might have been produced by approximately 10% equilibrium partial melting of a single type of source region with initial REE abundances which were chondritic relative and absolute. Since the age of the eucrites is about equal to that of the solar system, extensive chemical differentiation of the eucrite parent body prior to the formation of eucrites seems unlikely. If homogeneous accretion is assumed, the bulk composition of the eucrite parent body can be estimated; two estimates are provided, representing different hypotheses as to the ratio of metal to olivine in the parent body. Since a large number of differentiated olivine meteorites, which would represent material from the interior of the parent body, have not been detected, the eucrite parent body is thought to be intact. It is suggested that the asteroid 4 Vesta is the eucrite parent body.

Consolmagno, G. J.↗

Radiative equilibrium in rapidly expanding shells

The equation of radiative equilibrium for rapidly expanding spherical shells including the special relativistic terms is discussed, and a temperature-correction procedure for the solution of this equation is given. The temperature-correction scheme combines a partial linearization approach with the approximate Lambda-operator iteration method. For some test problems, the temperature structures of atmospheres in radiative equilibrium in the Lagrangian frame are calculated. The effects of the velocity field on the temperature stratification and the luminosity are also discussed. We find that the temperature structure of a moving photosphere in radiative equilibrium in the Lagrangian frame differs significantly from that of a static photosphere and that, at least, all first-order terms, in particular the advection and aberration terms, have to be included consistently both in the radiative transfer and the energy equation in studies of supernovae atmospheres and other high-speed radiating flows.

Hauschildt, P. H.↗

Constraints on triple oxygen isotope kinetics

The general assumption that systems are in equilibrium is convenient, but imperfect. Instead, the partial or full expression of kinetic reaction steps may need to be determined. Using an isotope fractionation Monte-Carlo model under the harmonic approximation (Figure 1 envelopes), we find the range of kinetic isotope effects (i.e., resulting from unidirectional chemical reactions) contains and exceeds the range of accessible equilibrium isotope effects. For the 16O-17O-18O system, accessible kinetic isotope effects can yield Δ′17O variations as large 0.8‰ from a single kinetic fractionation step. Reactions that yield the largest deviations from equilibrium are those with the largest molecular mass difference between decomposition fragments, typically the two products, such as a gas and solid generated from the thermal decomposition of an initial solid. For example, previously published experiments on the thermal decomposition of calcite (CaCO3) and dehydroxylation of brucite (Mg(OH)2) are matched by density functional theory models of each kinetic isotope effect, thus revealing their origin in mass-dependent reaction. Beyond oxygen, our approach applies to any system with more than two isotopes.

Oxygen isotopes↗

Orbital Resonances in the Solar Nebula: Strengths and Weaknesses

A planetesimal moving in the Solar Nebula experiences an aerodynamic drag which causes its orbit to circularize and shrink. However, resonant perturbations from a protoplanet interior to the planetesimal's orbit can counteract both the orbital decay and the damping of the eccentricity: the planetesimal can be captured into an orbital resonance and its eccentricity pumped up to a modestly high equilibrium value. Thus, orbital resonances constitute (partial) barriers to the delivery of planetesimals into the feeding zone of the protoplanet. We have established the characteristics of the phenomenon of resonance capture by gas drag in the circular restricted three-body approximation. We have determined the strengths of the equilibrium resonant orbits with respect to impulsive velocity perturbations. We conclude that planetesimals captured in orbital resonances are quite vulnerable to being dislocated from these orbits by mutual planetesimal interactions, but that the resonances are effective in slowing down the rate of orbital decay of planetesimals. Only very small bodies, less than or equal to 100 m, are able to reach a approx. 1 Earth mass protoplanet without being slowed down by resonances.

Malhotra, Renu↗

Orbital Resonances in the Solar Nebula: Strengths and Weaknesses

A planetesimal moving in the Solar Nebula experiences an aero- dynamic drag which causes its orbit to circularize and shrink. However, resonant perturbations from a protoplanet interior to the planetesimal's orbit ran counteract both the orbital decay and the damping of the eccentricity: the planetesimal can be captured into an orbital resonance and its eccentricity pumped up to a modestly high equilibrium value. Thus, orbital resonances constitute (partial) barriers to the delivery of planetesimals into the feeding zone of the protoplanet. We have established the characteristics of the phenomenon of resonance capture by gas drag in the circular restricted three-body approximation. We have determined the strengths of the equilibrium resonant orbits with respect to impulsive velocity perturbations. We conclude that planetesimals captured in orbital resonances are quite vulnerable to being dislocated from these orbits by mutual planetesimal interactions, but that the resonances are effective in slowing down the rate of orbital decay of planetesimals. Only very small bodies, less or approx. equal to 100 m, are able to reach a approx. 1 mass of the earth protoplanet without being slowed down by resonances.

Malhotra, Renu↗

Spectrum formation in supernovae - Numerical techniques

The study combines several novel techniques for spectrum simulation in the Eddington computer program which solves the comoving frame equation of transfer coupled with the statistical and radiative equilibrium equations. One of these is a generalization of the accelerated lambda iteration (ALI) scheme to include an approximate frequency-derivative operator. This greatly enhances the convergence rate of ALI in optically thick, high-velocity shear flows. Another is a partial linearization technique which is capable of efficiently solving a very large number of rate equations on a moderately sized computer. An expansion opacity and emissivity approximation is derived which makes it possible to determine the effect on the transfer and statistical equilibrium of a very large number of lines not explicitly represented in the frequency grid and additionally to treat line-blanketing from species not explicitly included in the rate equations. The utility of these techniques is illustrated with models of two supernovae.

Eastman, Ronald G.↗

The Dos and Don'ts of how to Build a Planet, Using the Moon as an Example

The bulk chemical compositions of planets may yield important clues concerning planetary origins. Failing that, bulk compositions are still important, in that they constrain calculation of planetary mineralogies and also constrain the petrogenesis of basaltic magmas. In the case of the Earth, there is little or no debate about the composition of the Earth's upper mantle. This is because our sample collections contain peridotitic xenoliths of that mantle. The most fertile of these are believed to have been little modified from their primary compositions. Using these samples and chondritic meteorites as a starting point, small perturbations on the compositions of existing samples allow useful reconstruction of the bulk silicate Earth (BSE). Elsewhere, I have argued that the next simplest case is the Eucrite Parent Body (EPB). Reconstructions based on Sc partitioning indicate that the EPB can be well approximated by a mixture of 20% eucrite and 80% equilibrium olivine. This leads to a parent body that is similar to CO (or devolatilized CM) chondrites. Partial melting experiments on CM chondrites confirm this model, because the residual solids in these experiments are dominated by olivine with minor pigonite [3]. The most difficult bodies to reconstruct are those that have undergone the most differentiation. Both the Moon and Mars may have passed through a magma ocean stage. In any event, lunar and martian basalts, unlike eucrites, were not derived from undifferentiated source regions. Reconstructions are primarily based on compositional trends within the basalts themselves with some critical assumptions: (i) Refractory lithophile elements (Ca, Al, REE, actinides) are presumed to be in chondritic relative abundances; and (ii) some major element ratio is believed to exist in a chondritic ratio (e.g., Mg/Si, Mg/Al). The most commonly used parameter is Mg/Si.

Jones, J. H.↗

Error analysis of finite element solutions for postbuckled cylinders

A general method of error analysis and correction is investigated for the discrete finite-element results for cylindrical shell structures. The method for error analysis is an adaptation of the method of successive approximation. When applied to the equilibrium equations of shell theory, successive approximations derive an approximate continuous solution from the discrete finite-element results. The advantage of this continuous solution is that it contains continuous partial derivatives of an order higher than the basis functions of the finite-element solution. Preliminary numerical results are presented in this paper for the error analysis of finite-element results for a postbuckled stiffened cylindrical panel modeled by a general purpose shell code. Numerical results from the method have previously been reported for postbuckled stiffened plates. A procedure for correcting the continuous approximate solution by Newton's method is outlined.

Sistla, Rajaram↗

Theory and simulation of a high-frequency magnetic drift wave

The equilibrium of a nonneutral plasma in a toroidal vessel with a toroidal magnetic field is analyzed. In the zero inertia limit it is heuristically shown from force balance considerations that there is an electrostatic hoop force and a force due to diamagnetism along the major radius. The problem of equilibrium is formulated in terms of solutions of a 2D partial difference equation. This equation is solved in the large-aspect-ratio limit and a general expression for the shift of the potential axis is obtained which shows that the shift is approximately epsilon and that it depends solely on the internal capacitance of the cloud. The simulation study is based upon the modified MHD equations and the nonlocal nature of the mode is investigated. Applications to sub-Alfvenic plasma expansions, electromagnetic waves in the earth's magnetosphere, and plasma switches are discussed.

Huba, J. D.↗

Experimental Constraints on Ureilite Petrogenesis

This experimental study explores the petrogenesis of ureilites by a partial melting/smelting process. Experiments have been performed over temperature (1150-1280 C), pressure (5-12.5 MPa), and low oxygen fugacity (graphite-CO gas) conditions appropriate for a hypothetical ureilite parent body approximately 200 km in size. Experimental and modeling results indicate that a partial melting/smelting model of ureilite petrogenesis can explain many of the unique characteristics displayed by this meteorite group. Compositional information preserved in the pigeonite-olivine ureilites was used to estimate the composition of melts in equilibrium with the ureilites. The results of 20 experiments saturated with olivine, pyroxene, metal, and liquid with appropriate ureilite compositions are used to calibrate the phase coefficients and pressure-temperature dependence of the smelting reaction. The calibrated coefficients are used to model the behavior of a hypothetical residue that is experiencing fractional smelting. The residue is initially olivine-rich and smelting progressively depletes the olivine content and enriches the pyroxene and metal contents of the residues. The modeled residue composition at 1260 C best reproduces the trend of ureilite bulk compositions. The model results also indicate that as a ureilite residue undergoes isothermal decompression smelting over a range of temperatures, Ca/Al values and Cr203 contents are enriched at lower temperatures (below about 1240 C) and tend to decrease at higher temperatures. Therefore, fractional smelting can account for the high Ca/A1 and Cr203 wt% values observed in ureilites. We propose that ureilites were generated from an olivine-rich, cpx-bearing residue. Smelting began when the residue was partially melted and contained liquid, olivine, and carbon. These residues experienced varying degrees of fractional smelting to produce the compositional variability observed within the pigeonite-bearing ureilites. Variations in mineral composition, modal proportions, and isotopic signatures are best described by heterogeneous accretion of the ureilite parent body followed by minimal and variable degrees of igneous processing.

Singletary, Steven↗

Explosions of infalling comets in Jupiter's atmosphere

In view of the expected collision of comet Shoemaker-Levy 9 (1993e) with Jupiter in 1994 July, we calculate basic properties of the initial interaction for a simplified Jovian atmosphere. The comet is expected to impact Jupiter at 60 km/sec and at an angle of 45 deg to the zenith. The shock wave generated by the bolide should be optically thick once it has penetrated to an atmospheric density approximately 10(exp -6) gr/cm(exp 3), and we calculate the post-shock conditions assuming local thermodynamic equilibrium (LTE) for shock velocities v(sub sh) in the range 10 to 60 km/sec and preshock densities rho(sub a) = 10(exp -6) to 10(exp -2) gr/cm(exp 3). Our shock calculations include molecular hydrogen, atomic hydrogen, ionized hydrogen, neutral helium, and singly ionized helium. Even at the highest shock velocity, the gas is only partially ionized and the postshock temperature rises with preshock density in order to maintain the ionization. The value of the effective shock adiabatic index gamma(sub sh) varies from 1.17 (at low v(sub sh) and rho(sub a) to 1.40 (at high v(sub sh) and rho(sub a). The ablation rate is limited by the radiative flux that reaches the bolide surface. We argue that the ablated gas does not efficiently transfer its kinetic energy to the atmosphere, and it ultimately slows in a similar fashion to the comet material. As the bolide initially falls through the atmosphere, the character of the shock emission changes. At rho(sub a) approximately 10(exp -8) gr/cm (exp 3), the gas is optically thin and we expect line emission; in the optical spectrum, Balmer emission is expected from the shocked atmosphere and low-ionization metal lines from ablated cometary material. At rho(sub a) approximately 10(exp -6) gr/m(exp 3), the shocked gas is optically thick and the shock front near the bolide produces a blackbody spectrum. The temperature is favorable for ultraviolet (1000 to 3000 A) emission and the luminosity may be approximately 5 x 10(exp 23) ergs/sec for approximately 0.6 sec for a bolide 1 km in radius. At rho(sub a) approximately 10(exp -4) gr/cm(exp 3), the bolide has passed below the ultraviolet photosphere. The shock front emits considerable ionizing radiation, but it is absorbed in a narrow preshock region. The bolometric correction for the optical luminosity is large and we expect a 3000 to 8000 A luminosity of approximately 3 x 10(exp 23) ergs/sec for approximately 1 sec. The optical emission is strongly peaked in the vicinity of the bolide. The bolide does have a somewhat less luminous, optically thick trail extending greater than or equal to 10 km, but the radiation is characterized by a temperature of 4000 to 5000 K. From the fragmentation model of Chyba, Thomas, & Zahnle (1993), the bolide deposits most of its kinetic energy at rho(sub a) approximately 10(exp -3) gr/cm(exp 3) and this is the effective explosion site. The shock wave from such an explosion can move up about one density scale height. We examine the breakout of the shock front from the Jovian atmosphere and find that the shock acceleration in the decreasing density region is slow, so that the energy flux in the shock front is small. Higher velocities might be generated by shock acceleration along the channel left by the bolide if the shock motion can occur before the channel closes off as a result of radiative cooling. Hot gas created by the explosion ultimately rises due to buoyancy on a timescale of a minute. The luminosity is highest when the bubble first rises into the optically thin part of the atmosphere and may be approximately 1 x 10(exp 25) ergs/sec in the near-infrared. Roughly 1% of the initial bolide energy may be radiated in this way; the rest of the energy is lost to sound waves from the initial explosion and to work done by the bubble on the surrounding atmosphere.

Chevalier, Roger A.↗

Combustion of hydrogen injected into a supersonic airstream (a guide to the HISS computer program)

A computer program based on a finite-difference, implicit numerical integration scheme is described for the prediction of hydrogen injected into a supersonic airstream at an angle ranging from normal to parallel to the airstream main flow direction. Results of calculations for flow and thermal property distributions were compared with 'cold flow data' taken by NASA/Langley and show excellent correlation. Typical results for equilibrium combustion are presented and exhibit qualitatively plausible behavior. Computer time required for a given case is approximately one minute on a CDC 7600. A discussion of the assumption of parabolic flow in the injection region is given which demonstrates that improvement in calculation in this region could be obtained by a partially-parabolic procedure which has been developed. It is concluded that the technique described provides an efficient and reliable means for analyzing hydrogen injection into supersonic airstreams and the subsequent combustion.

Dyer, D. F.↗

Emission Spectral Measurements in the Plenum of an Arc Jet Wind Tunnel

Arc jet wind tunnel facilities are used to evaluate thermal protection system materials for re-entry vehicles. The high speed, high temperature flowfield generated by the arc jet can simulate the extreme aerodynamic heating environment experienced during re-entry so that the survivability of heat shield materials and performance of various designs options can be tested. Although the re-entry heating environment can be approximated in the arc jet facility, the flowfield only partially simulates the actual re-entry flight conditions. Reynolds numbers are not matched so that surface shear stress distributions and mass transfer rates due to ablation or other mechanisms are not modeled correctly. Unlike flight conditions the arc freestream air is in non-equilibrium because of the rapid expansion that occurs in the supersonic nozzle. To properly study the actual re-entry flow environment, computational fluid dynamics, computational chemistry and radiation models must be used. Arc jet tunnel tests serve to validate these models. To perform accurate simulations inlet and boundary-conditions are needed, which come from measurements of the flowfield. The present study is concerned with measurements in the plenum region of an arc heater. In the past, conditions in the arc heater flowfield have been predicted using simulations since conventional measurement techniques could not be used in the harsh extremely high temperature environment. The present study is part of a recent push to utilize optical techniques to help better characterize the arc jet flowfields. Emission measurements have been made in the shock layer and the constrictor section of the arc heater to determine temperatures and species number densities. LIF measurements have been made in the free stream to determine temperature and velocity.

Donohue, Jim↗

Combustion of hydrogen injected into a supersonic airstream (the SHIP computer program)

The mathematical and physical basis of the SHIP computer program which embodies a finite-difference, implicit numerical procedure for the computation of hydrogen injected into a supersonic airstream at an angle ranging from normal to parallel to the airstream main flow direction is described. The physical hypotheses built into the program include: a two-equation turbulence model, and a chemical equilibrium model for the hydrogen-oxygen reaction. Typical results for equilibrium combustion are presented and exhibit qualitatively plausible behavior. The computer time required for a given case is approximately 1 minute on a CDC 7600 machine. A discussion of the assumption of parabolic flow in the injection region is given which suggests that improvement in calculation in this region could be obtained by use of the partially parabolic procedure of Pratap and Spalding. It is concluded that the technique described herein provides the basis for an efficient and reliable means for predicting the effects of hydrogen injection into supersonic airstreams and of its subsequent combustion.

Markatos, N. C.↗

Photoevaporating stellar envelopes observed with Rayleigh beacon adaptive optics

We present H-alpha and I-band images of a approximately 1 min diameter field centered on theta(sup 1) C Ori made with a unique adaptive optics system that uses either starlight or Rayleigh-backscattered laser light to correct for atmospheric wavefront distortion. Approximately one-half of the stars in this region are positionally associated with knots of ionized gas, which are interpreted as photoevaporating envelopes of low-mass stars. The acronyms 'partially ionized globule' (PIGs), external ionized (accretion) disks in the environs of radiation sources (EIDERs), or protoplanetary disks (ProPlyDs) all refer to these same knots. The H-alpha fluxes of the PIGs are proportional to their 2 cm radio continumm flux densities, and for nearly all the ionized knots, the 2 cm brightness temperatures are consistent with theta(sup 1) C Ori as the primary source of ionization. The comet-like morphology of the bright nebulosities is modeled as the result of an equilibrium between photoionization, recombination, and shadowing. The radii of the ionized 'head' of the cometary PIGs grow with distance from theta(sup 1) C Ori; the radii range from approximately less than or equal to 0.05 sec to approximately 0.25 sec. We interpret the size-distance relationship as evidence that the envelopes all have the same density profile and mass-loss rate within a factor of 2. Faint, arcuate wisps are observed 1 sec to 2 sec distance from some of the cometary nebulosities; these are modeled as bow shocks caused by the wind from theta(sup 1) C Ori. The positions of the stars associated with the PIGs in the observational H-R diagram indicate they are pre-main-sequence stars with masses less than approximately 3 solar mass, with approximately 1 solar mass being typical. Their medium I-K color is 2.9.

Mccullough, P. R.↗

Stability of elastic bending and torsion of uniform cantilever rotor blades in hover with variable structural coupling

The stability of elastic flap bending, lead-lag bending, and torsion of uniform, untwisted, cantilever rotor blades without chordwise offsets between the elastic, mass, tension, and areodynamic center axes is investigated for the hovering flight condition. The equations of motion are obtained by simplifying the general, nonlinear, partial differential equations of motion of an elastic rotating cantilever blade. The equations are adapted for a linearized stability analysis in the hovering flight condition by prescribing aerodynamic forces, applying Galerkin's method, and linearizing the resulting ordinary differential equations about the equilibrium operating condition. The aerodynamic forces are obtained from strip theory based on a quasi-steady approximation of two-dimensional unsteady airfoil theory. Six coupled mode shapes, calculated from free vibration about the equilibrium operating condition, are used in the linearized stability analysis. The study emphasizes the effects of two types of structural coupling that strongly influence the stability of hingeless rotor blades. The first structural coupling is the linear coupling between flap and lead-lag bending of the rotor blade. The second structural coupling is a nonlinear coupling between flap bending, lead-lag bending, and torsion deflections. Results are obtained for a wide variety of hingeless rotor configurations and operating conditions in order to provide a reasonably complete picture of hingeless rotor blade stability characteristics.

Hodges, D. H., Roberta.↗

Predicting major element mineral/melt equilibria - A statistical approach

Empirical equations have been developed for calculating the mole fractions of NaO0.5, MgO, AlO1.5, SiO2, KO0.5, CaO, TiO2, and FeO in a solid phase of initially unknown identity given only the composition of the coexisting silicate melt. The approach involves a linear multivariate regression analysis in which solid composition is expressed as a Taylor series expansion of the liquid compositions. An internally consistent precision of approximately 0.94 is obtained, that is, the nature of the liquidus phase in the input data set can be correctly predicted for approximately 94% of the entries. The composition of the liquidus phase may be calculated to better than 5 mol % absolute. An important feature of this 'generalized solid' model is its reversibility; that is, the dependent and independent variables in the linear multivariate regression may be inverted to permit prediction of the composition of a silicate liquid produced by equilibrium partial melting of a polymineralic source assemblage.

Hostetler, C. J.↗

Photosynthetic fractionation of 13C and concentrations of dissolved CO2 in the central equatorial Pacific during the last 255,000 years

Carbon isotopically based estimates of CO2 levels have been generated from a record of the photosynthetic fractionation of 13C [is equivalent to epsilon(p)] in a central equatorial Pacific sediment core that spans the last approximately 255 ka. Contents of 13C in phytoplanktonic biomass were determined by analysis of C37 alkadienones. These compounds are exclusive products of Prymnesiophyte algae which at present grow most abundantly at depths of 70-90 m in the central equatorial Pacific. A record of the isotopic composition of dissolved CO2 was constructed from isotopic analyses of the planktonic foraminifera Neogloboquadrina dutertrei, which calcifies at 70-90 m in the same region. Values of epsilon(p), derived by comparison of the organic and inorganic delta values, were transformed to yield concentrations of dissolved CO2 [is equivalent to c(e)] based on a new, site-specific calibration of the relationship between epsilon(p) and c(e). The calibration was based on reassessment of existing epsilon(p) versus c(e) data, which support a physiologically based model in which epsilon(p) is inversely related to c(e). Values of PCO2, the partial pressure of CO2 that would be in equilibrium with the estimated concentrations of dissolved CO2, were calculated using Henry's law and the temperature determined from the alkenone-unsaturation index U(K/37). Uncertainties in these values arise mainly from uncertainties about the appropriateness (particularly over time) of the site-specific relationship between epsilon(p) and 1/c(e). These are discussed in detail and it is concluded that the observed record of epsilon(p) most probably reflects significant variations in delta pCO2, the ocean-atmosphere disequilibrium, which appears to have ranged from approximately 110 microatmospheres during glacial intervals (ocean > atmosphere) to approximately 60 microatmospheres during interglacials. Fluxes of CO2 to the atmosphere would thus have been significantly larger during glacial intervals. If this were characteristic of large areas of the equatorial Pacific, then greater glacial sinks for the equatorially evaded CO2 must have existed elsewhere. Statistical analysis of air-sea pCO2 differences and other parameters revealed significant (p<0.01) inverse correlations of delta pCO2 with sea surface temperature and with the mass accumulation rate of opal. The former suggests response to the strength of upwelling, the latter may indicate either drawdown of CO2 by siliceous phytoplankton or variation of [CO2]/[Si(OH)4] ratios in upwelling waters.

NASA Discipline Exobiology↗