Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particulate P”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Measurement of mechanical and thermophysical properties of dimensionally stable materials for space applications

Mechanical, thermal, and physical property test data was generated for as-fabricated advanced composite materials at room temperature (RT), -150 and 250 F. The results are documented of mechanical and thermophysical property tests of IM7/PEEK and discontinuous SiC/Al (particulate (p) and whisker (w) reinforced) composites which were tested at three different temperatures to determine the effect of temperature on material properties. The specific material systems tested were IM7/PEEK (0)8, (0, + or - 45, 90)s, (+ or - 30, 04)s, 25 vol. pct. (v/o) SiCp/Al, and 25 v/o SiCw/Al. RT material property results of IM7/PEEK were in good agreement with the predicted values, providing a measure of consolidation integrity attained during fabrication. Results of mechanical property tests indicated that modulus values at each test temperature were identical, whereas the strength (e.g., tensile, compressive, flexural, and shear) values were the same at -150 F, and RT, and gradually decreased as the test temperature was increased to 250 F. Similar trends in the strength values was also observed in discontinuous SiC/Al composites. These results indicate that the effect of temperature was more pronounced on the strength values than modulus values.

Rawal, Suraj P.↗

Carbon Isotope Fractionations Associated with Methanotrophic Growth with the Soluble and Particulate Methane Monooxygenases

Growth experiments with the RuMP-type methanotroph, Methylococcus capsulatus (Bath), have demonstrated that biomass and lipid biomarkers are significantly depleted in C-13 compared to the substrate methane and that the extent of fractionation is dependent on whether cells express the soluble (s) or particulate (p) methane monooxygenase (MMO). The presence or absence of the characteristic sMMO subunits was monitored using SDS-polyacrylamide gels. In M. capsulatus grown with no Cu supplementation, the characteristic sMMO subunits were observed in the soluble fraction throughout the entire growth period and biomass was depleted in C-13 by approximately 14,700 relative to substrate methane. In cells grown with 5uM Cu, no sMMO bands were observed and a greater fractionation of approximately 27,700 in resultant biomass was obtained. Methanol growth experiments with M. capsulatus and with a RuMP methylotroph, Methylophilus methylotrophus, in which biomass measurements yielded depletions in C-13 of 9 and 5%(sub o), respectively, suggest that oxidation of methane is the major fractionation step. Growth of M. capsulatus at a low level of oxygen, approximately 0.5%, had no significant effect on carbon isotope fractionation by either sMMO or pMMO. These observations are significant for identification of molecular biomarkers; and methanotrophic contributions to carbon isotope composition in natural environments.

Jahnke, Linda L.↗

The PACE-MAPP Algorithm: Coupled Ocean/Aerosol Products

The PACE-MAPP algorithm, under development for combined SPEXone, HARP2 and OCI observations from NASA’s future Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) satellite mission, directly inverts the coupled atmosphere-ocean system to retrieve aerosol optical and microphysical properties and ocean optical properties simultaneously. PACE-MAPP thus retrieves the spectrally-resolved inherent optical properties of the Earth’s waters: the spectral particulate scattering coefficient, b_p (λ), the spectral absorption coefficient for particulates and color-dissolved matter, a_tot (λ), and the spectral particulate backscatter efficiency, b ̃_"bp". From these three spectrally-resolved components, we can derive the spectral particulate hemispherical backscattering coefficient b_bp (λ) and the spectral diffuse attenuation coefficient K_"d" (λ). Direct comparisons of b_"bp" (532) and K_"d" (532) are made to collocated High-Spectral Resolution Lidar (HSRL) in-water measurements. The PACE-MAPP algorithm was tested using PACE-analog datasets collected by Research Scanning Polarimeter (RSP) observations during the NASA NAAMES (The North Atlantic Aerosols and Marine Ecosystems Study) and SABOR (Ship-Aircraft Bio-Optical Research) airborne campaigns, both of which also include ship-based in situ measurements.

Snorre Alfred Moen Stamnes↗

Uptake of Nitrate and Sulfate on Dust Aerosols during TRACE-P

Aerosol data collected near Asia on the DC-8 aircraft platform during TRACE-P has been examined for evidence of uptake of NO3(-) and SO4(-) on dust surfaces. Data is compared between a sector where dust was predominant and a sector where dust was less of an influence. Coincident with dust were higher mixing ratios of anthropogenic pollutants. HNO3, SO2, and CO were higher in the dust sector than the nondust sector by factors of 2.7, 6.2, and 1.5, respectively. The colocation of dust and pollution sources allowed for the uptake of NO3(-) and nss-SO4(-) on the coarse dust aerosols, increasing the mixing ratios of these particulates by factors of 5.7 and 2.6 on average. There was sufficient nss-SO4(-) to take up all of the NH4(+) present, with enough excess nss-SO4(-) to also react with dust CaCO3. This suggests that the enhanced NO3(-) was not in fine mode NH4NO3. Particulate NO3(-) (p-NO3(-)) constituted 54% of the total NO3(-), (t-NO3(-)) on average, reaching a maximum of 72% in the dust sector. In the nondust sector, p-NO3(-) contributed 37% to t-NO3(-), likely due to the abundance of sea salts there. In two other sectors where the influence of dust and sea salt were minimal, p-NO3(-), accounted for < 15% of t-NO3(-).

Jordan, C. E.↗

Isotopically Tracking Nitrogen Oxides, Nitrous Acid, And Nitric Acid, Particulate Nitrate from Wildfire During FIREX-AQ

Wildfires are an important source of reactive nitrogen species including nitrogen oxides (NOx = NO + NO2) and nitrous acid (HONO), as well as products such as nitric acid (HNO3) and particulate nitrate (p-NO3-). These species have strongly influence air quality and climate. In summer of 2019 (July 25 —August 21), as part of the FIREX-AQ ground mission, we drove ~3000 miles and sampled smoke of different ages in both daytime and nighttime from 5 different wildfires in the western US. Using recently developed methods that have been validated in both laboratory and field settings, we conducted high time resolution collection of NOx, NO2, HONO, HNO3, and p-NO3- for off-line characterization of isotopic composition δ15N, δ18O and Δ17O (=δ17O−0.52 δ18O). δ15N serves as a potential tracer for tracking sources and reactive nitrogen cycling pathways, δ18O and Δ17O provide key information about oxidation pathways (i.e. O3 versus RO2). Our measured δ15N for HONO ranges from -4.9‰ to +5.2‰ and -8‰ to +5.2‰ respectively, in the majority overlapping with our prior lab controlled burning results, which suggests the capability of δ15N for tracing the biomass burning emissions against other sources including vehicular emissions and soil emissions. In addition, our measurements show δ18O and Δ17O for NO2 and HONO vary significantly day vs night, as well as in young smoke vs aged smoke, likely reflecting different oxidizing mechanisms under different smoke conditions. Preliminary results of isotopic signatures of all the above reactive nitrogen species will be presented, and their relationships will be explored to identify wildfire derived reactive nitrogen source signatures and to constrain atmospheric processing pathways (e.g. secondary formation of HONO) for different fires under various smoke conditions depending on fuel types, fire conditions and meteorological conditions.

Jiajue Chai↗

System integration and demonstration of adhesive bonded high temperature aluminum alloys for aerospace structure, phase 2

Adhesive bonding materials and processes were evaluated for assembly of future high-temperature aluminum alloy structural components such as may be used in high-speed civil transport aircraft and space launch vehicles. A number of candidate high-temperature adhesives were selected and screening tests were conducted using single lap shear specimens. The selected adhesives were then used to bond sandwich (titanium core) test specimens, adhesive toughness test specimens, and isothermally aged lap shear specimens. Moderate-to-high lap shear strengths were obtained from bonded high-temperature aluminum and silicon carbide particulate-reinforced (SiC(sub p)) aluminum specimens. Shear strengths typically exceeded 3500 to 4000 lb/in(sup 2) and flatwise tensile strengths exceeded 750 lb/in(sup 2) even at elevated temperatures (300 F) using a bismaleimide adhesive. All faceskin-to-core bonds displayed excellent tear strength. The existing production phosphoric acid anodize surface preparation process developed at Boeing was used, and gave good performance with all of the aluminum and silicon carbide particulate-reinforced aluminum alloys investigated. The results of this program support using bonded assemblies of high-temperature aluminum components in applications where bonding is often used (e.g., secondary structures and tear stoppers).

Falcone, Anthony↗

On the Cycling of 231 Pa and 230 Th in Benthic Nepheloid Layers

The naturally-occurring radionuclides protactinium-231 ( 231 Pa) and thorium-230 ( 230 Th) are produced at approximately uniform rates in the ocean and thought to be removed from the water column through a reversible exchange with settling particles. Recent measurements along the U.S. GEOTRACES North Atlantic transect (GA03) revealed two features which are at odds with current understanding about 231 Pa and 230 Th cycling in the ocean: (i) a sharp decrease in dissolved 231 Pa ( 231 Pa d ) and 230 Th ( 230 Th d ) activities with depth below 2000-4000 m and (ii) very high particulate 231 Pa ( 231 Pa p ) and 230 Th ( 230 Th p ) activities near the bottom, at a number of stations between the New England continental shelf and Bermuda. Concomitant measurements of light attenuation from beam transmissometry showed that both features occur in benthic nepheloid layers (BNLs), which suggests that these features may stem, at least partly, from the presence of resuspended sediment in the deep water column. Here we explore the behaviour of 231 Pa and 230 Th in BNLs by using (i) radionuclide, optical, and hydrographic data from the western segment of GA03 (west of Bermuda) and (ii) a simplified model of particle and radionuclide cycling that includes a lateral particle source. First, the BNLs observed at GA03 stations are characterized from measurements of the beam attenuation coefficient converted to particle concentrations. At all stations, particle concentrations below the clear water minimum were the highest in the bottom mixed layer, whose thickness ranged from 95 to 320 m, and decreased generally with height above the bottom. The thickness of strong BNLs varied from 482 to 1358 m and the vertical integral of particle concentration in excess to that at the clear water minimum varied from 1 x 10 4 to 2 x 10 6 mg m −2 , among different stations. Second, the particle-radionuclide model is fitted to data from stations GT11-04 (New England continental rise) and GT11-08 (Hatteras abyssal plain), where samples for radionuclide analyses were collected in the BNL. The model can reproduce simultaneously the increase of particle concentration with depth, the low 231 Pa d and 230 Th d in the BNLs, and the high 231 Pa p and 230 Th p near the bottom. According to the model, at heights less than about 300 m above the seafloor, the dissolved phase was set primarily by a balance between adsorption and desorption, with vertical turbulent mixing playing a secondary role, whilst the particulate phase behaved largely as a non-reactive constituent supplied laterally and transported vertically by particle settling and turbulent mixing. Sensitivity tests with the model suggest that lateral particle sources near continental slopes and similar reliefs can produce significant biases both in the 230 Th normalization method and in the interpretation of sediment 231 Pa/ 230 Th records. Our findings yield insights into the influence of sediment resuspension and transport on 231 Pa and 230 Th in the deep ocean and highlight the need for considering these processes in paleoceanographic applications.

Nepheloid layer↗

Measurement of the effects of particulate contamination on X-ray reflectivity

Because particles of sizes larger than a few tenths microns adversely affect high resolution X-ray telescopes by scattering and absorbing X-rays, the cleanliness required to maintain the about 1 percent overall calibration precision desired for the Advanced X-ray Astrophysics Facility (AXAF) is being investigated. At the grazing angles used for the AXAF mirrors, each particle shadows a surface area about 100 times its geometric area, necessitating glass occlusion specifications much more stringent than typically stipulated for visible-light particulate contamination. On test flats coated with gold, controlled levels of contamination have been deposited spanning the range from 5 x 10 to the -5th to 0.005 fractional area covered, and the absorption component of extinction has been measured over a range of grazing angles and X-ray energies to verify the predicted effects of particulate contamination.

Slane, P.↗

Development of high temperature liquid lubricants for low-heat rejection: Heavy duty diesel engines

The objective of this DOE program was to develop a liquid lubricant that will allow advanced diesel engines to operate at top ring reversal temperatures approaching 500 C and sump temperatures approaching 250 C. The lubricants developed demonstrated at marginal increase in sump temperature capability, approximately 15 C, and an increase in top ring reversal temperature. A 15W-40 synthetic lubricant designated HTL-4 was the best lubricant developed in terms of stability, wear control, deposit control dispersancy, and particulate emissions.

Wiczynski, P. D.↗

Photoaffinity labeling of regulatory subunits of protein kinase A in cardiac cell fractions of rats

Photoaffinity labeling in heart tissue of rats flown on Cosmos 2044 was used to measure the regulatory (R) subunits of adenosine monophosphate-dependent protein kinase. A significant decrease of RII subunits in the particulate cell fraction extract (S2; P less than 0.05 in all cases) was observed when extracts of tissue samples from vivarium controls were compared with those from flight animals. Photoaffinity labeling of the soluble fraction (S1) was observed to be unaffected by spaceflight or any of the simulation conditions. Proteins of the S2 fraction constitute a minor (less than 10 percent) component of the total, whereas the S1 fraction contained most of the cell proteins. Changes in a relatively minor aspect of adenosine monophosphate-mediated reactions are considered to be representative of a metabolic effect.

Mednieks, M. I.↗

Aspects of the mechanisms of smoke generation by burning materials

An investigation of smoke generation during the burning of natural and synthetic solid materials (relevant to fire safety problems), under simulated fire conditions, is presented. Smoke formation mechanisms, including flaming and nonflaming combustion, are reviewed, and the complex physical, chemical, and electrical processes, important in smoke particulate production, are identified. With reference to the smoke formation mechanisms, measured experimental data are discussed, and include effects of ventilation gas temperature, dependence on material composition, and chemical analysis of smoke particulates. Significant differences in smoke characteristics are observed between flaming and nonflaming conditions, which is attributed to specific differences in controlling mechanisms and resultant ways leading to particulate formation. The effects of polymer substrate properties and effects of additives for a given substrate on smoke properties are also discussed in terms of basic processes. It is shown that many of the measured trends can be interpreted by considering postulated mechanisms of particulate formation.

Bankston, C. P.↗

Computer Simulation of Spatial Arrangement and Connectivity of Particles in Three-Dimensional Microstructure: Application to Model Electrical Conductivity of Polymer Matrix Composite

Computer simulation is a powerful tool for analyzing the geometry of three-dimensional microstructure. A computer simulation model is developed to represent the three-dimensional microstructure of a two-phase particulate composite where particles may be in contact with one another but do not overlap significantly. The model is used to quantify the "connectedness" of the particulate phase of a polymer matrix composite containing hollow carbon particles in a dielectric polymer resin matrix. The simulations are utilized to estimate the morphological percolation volume fraction for electrical conduction, and the effective volume fraction of the particles that actually take part in the electrical conduction. The calculated values of the effective volume fraction are used as an input for a self-consistent physical model for electrical conductivity. The predicted values of electrical conductivity are in very good agreement with the corresponding experimental data on a series of specimens having different particulate volume fraction.

Louis, P.↗

Effect of small scattering centers on the thermoelectric properties of p-type SiGe alloys

Theory predicts that the addition of ultra-fine, inert, phonon-scattering centers to thermoelectric materials will reduce their thermal conductivity. To investigate this prediction, ultrafine particulates (20 to 120 A) of silicon nitride have been added to boron-doped, p-type, 80/20 SiGe. All of the SiGe samples produced from ultrafine powder have lower thermal conductivities than standard SiGe, but high-temperature heat treatment increases the thermal conductivity back to the value for standard SiGe. However, the SiGe samples with silicon nitride, inert, phonon-scattering centers retained the lower thermal conductivity after several heat treatments. A reduction of approximately 25 percent in thermal conductivity has been achieved in these samples. The magnitude of the reduction agrees with theoretical predictions.

Beaty, John S.↗