Search NASA⌕ Search

SEARCH · Search NASA

Results for “Periodic Hill”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Validation of OpenPronghorn for Periodic Hill Flow Separation

OpenPronghorn is an open-source, MOOSE-based thermal-hydraulics simulation tool used for advanced reactor analysis. As an open-source code, it offers a transparent framework for validating governing equations, assumptions, and numerical methods against established benchmarks. This study evaluates OpenPronghorn's RANS turbulence model against the ERCOFTAC Case 81 periodic hill benchmark, a standard test case for separated turbulent flow featuring curved-wall separation, recirculation, shear-layer development, and reattachment. Streamwise velocity profiles predicted by OpenPronghorn were compared to reference LES data at multiple x/h locations. Results show that OpenPronghorn captures the overall trend of the velocity profiles, but the largest discrepancies occur in the separated-flow region, where turbulence is highly anisotropic and strongly affected by adverse pressure gradients and wall curvature—conditions that are inherently difficult for standard RANS models to resolve. Future work will test alternative k-e model variants and correction terms to improve prediction accuracy in this region.

42 - ENGINEERING↗
DOE OSTI2025

Structural uncertainty assessment for low-Mach wall-resolved large-eddy simulations: Plane Channel and Periodic Hill Use Cases

A structural uncertainty assessment is provided for a set of wall-resolved large-eddy simulations (WRLES) using a turbulent channel flow (𝑅𝑒 𝜏 395) and a periodic hill in the turbulent regime (𝑅𝑒 𝑏 2800) validation suite. The standard one-equation subgrid scale turbulent kinetic energy model (𝑘 𝑠𝑔𝑠 ) using both a static and dynamic coefficient approach along with Wall Adapting Local Eddy Viscosity (WALE) are exercised. The 𝑘 𝑠𝑔𝑠 model activated in this study also allows for a correction that supports theoretical turbulent viscosity and total kinetic energy scaling (cubit and quadratic, respectively) in the near-wall regime. Channel and hill results showcase very good agreement between prediction and simulation for the WALE and the dynamic coefficient 𝑘 𝑠𝑔𝑠 model. The study also demonstrates that near-wall damping improves predictivity for the static coefficient 𝑘 𝑠𝑔𝑠 model, while proving an unnecessary additional contribution for the dynamic coefficient 𝑘 𝑠𝑔𝑠 model as near-wall scaling is naturally captured. Overall conclusions are that this suite of WRLES models are well suited for production usage in the Sierra-based low-Mach codes.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2014

Model-Invariant Hybrid LES-RANS Computation of Separated Flow Past Periodic Hills

The requirement that physical quantities not vary with a hybrid LESRANS model's blending parameter imposes conditions on the computation that lead to better results across LES-RANS transitions. This promises to allow placement of those transitions so that LES is performed only where required by the physics, improving computational efficiency. The approach is applied to separated flow past periodic hills, where good predictions of separation-bubble size are seen due to the gradual, controlled, LES-RANS transition and the resulting enhanced near-wall eddy viscosity.

Woodruff, Stephen↗
NASA NTRSDate not supplied

Numerical Investigation of Flow Over Periodic Hill

Hybrid turbulence modeling strategies that blend between large-eddy simulation and Reynolds-averaged Navier-Stokes promise to make optimal use of the available grid resolution. A delayed detached eddy simulation hybrid turbulence modeling strategy, based on the shear-stress transport turbulence model, was implemented into a finite-volume compressible Navier-Stokes code. Then the flow through a two-dimensional periodic hill channel was simulated. This geometry is a widely accepted benchmark test case for validating hybrid turbulence modeling strategies. The computational grid for the simulation was downloaded from a hybrid turbulence model validation website. The present hybrid turbulence model simulation predicts the size of the separated flow region as well as velocity and Reynolds stress profiles in good agreement with large-eddy simulation reference data.

Computational Fluid Dynamics↗
NASA NTRS2014

DNS of Flows over Periodic Hills using a Discontinuous-Galerkin Spectral-Element Method

Direct numerical simulation (DNS) of turbulent compressible flows is performed using a higher-order space-time discontinuous-Galerkin finite-element method. The numerical scheme is validated by performing DNS of the evolution of the Taylor-Green vortex and turbulent flow in a channel. The higher-order method is shown to provide increased accuracy relative to low-order methods at a given number of degrees of freedom. The turbulent flow over a periodic array of hills in a channel is simulated at Reynolds number 10,595 using an 8th-order scheme in space and a 4th-order scheme in time. These results are validated against previous large eddy simulation (LES) results. A preliminary analysis provides insight into how these detailed simulations can be used to improve Reynoldsaveraged Navier-Stokes (RANS) modeling

DNS↗
DOE OSTI2023

Large-Eddy Simulation of Flow Over Boeing Gaussian Bump Using Multiagent Reinforcement Learning Wall Model: Preprint

We develop a wall model for large-eddy simulation (LES) that takes into account various pressure-gradient effects using multi-agent reinforcement learning. The model is trained using low-Reynolds-number flow over periodic hills with agents distributed on the wall at various computational grid points. It utilizes a wall eddy-viscosity formulation as the boundary condition to apply the modeled wall shear stress. Each agent receives states based on local instantaneous flow quantities at an off-wall location, computes a reward based on the estimated wall-shear stress, and provides an action to update the wall eddy viscosity at each time step. The trained wall model is validated in wall-modeled LES of flow over periodic hills at higher Reynolds numbers, and the results show the effectiveness of the model on flow with pressure gradients. The analysis of the trained model indicates that the model is capable of distinguishing between the various pressure gradient regimes present in the flow. To further assess the robustness of the developed wall model, simulations of flow over the Boeing Gaussian bump are conducted at a Reynolds number of 2 x 10^6, based on the free-stream velocity and the bump width. The results of mean skin friction and pressure on the bump surface, as well as the velocity statistics of the flow field, are compared to those obtained from equilibrium wall model (EQWM) simulations and published experimental data sets. The developed wall model is found to successfully capture the acceleration and deceleration of the turbulent boundary layer on the bump surface, providing better predictions of skin friction near the bump peak and exhibiting comparable performance to the EQWM with respect to the wall pressure and velocity field. We also conclude that the subgrid-scale model is crucial to the accurate prediction of the flow field, in particular the prediction of separation.

boundary layer↗
DOE OSTI2021

Reynolds stress tensor measurements using magnetic resonance velocimetry: expansion of the dynamic measurement range and analysis of systematic measurement errors

This study presents magnetic resonance velocimetry (MRV) Reynolds Stress measurements in a periodic hill channel with a hill Reynolds number of Re = 29,500. The velocity encoding scheme is based on the ICOSA6 method with six icosahedral encoding directions and multiple encoding values are measured to increase the dynamic range. The full Reynolds stress tensor is obtained from a voxel-wise three-dimensional Gaussian fit using the magnitude data of all acquisitions. The MRV results are compared to a wall-resolved large eddy simulation and laser Doppler velocimetry measurements conducted in the same channel. It is shown that the MRV Reynolds stress data have excellent precision and agree qualitatively with the reference data. However, there are apparent systematic deviations. One of the most prominent error contributions is the signal attenuation caused by higher orders of motion, which leads to an overestimation of the turbulence level. Another fundamental error is identified in the assumption that the turbulence is Gaussian distributed. With the presented reconstruction technique, the MRV data are fitted to a statistical model, and depending on the examined flow setup, the Gaussian model can lead to considerable errors. Possible ways of how to reduce all identified errors are presented. In summary, this technique enables Reynolds stress tensor measurements in complex internal flows with high dynamic range and excellent precision. However, several issues need to be resolved to make the turbulence quantification more accurate.

42 ENGINEERING↗
DOE OSTI2021

Adaptive downstream tensorial eddy viscosity for hybrid large‐eddy simulations‐Reynolds‐averaged‐Navier–Stokes simulations

An adaptive method is developed to improve the accuracy of eddy‐viscosity Reynolds‐averaged‐Navier–Stokes (RANS) model in hybrid large‐eddy simulations (LES)‐RANS simulations by using available upstream LES results. The method first gets the tensorial eddy viscosity from the upstream LES solution at the LES‐RANS interface and then uses that information to improve the downstream RANS model by invoking the weak‐equilibrium assumption. The proposed method was evaluated via two test problems—flow in a channel and over a periodic hill. Results obtained show the proposed approach to increase the accuracy and stability of hybrid LES‐RANS simulations. Since the modification of the downstream RANS model is based on the tensorial eddy viscosity from the upstream LES solution, the method is adaptive to the problem being studied.

Zhang, Wanjia↗
NASA NTRS1983

Magnetospheric models

Of the planetary magnetospheres which have been explored, Jupiter's is by far the largest. It is a magnetosphere largely dominated by rotational effects. As such, it offers unique insight to the study of inaccessible pulsar magnetospheres. The present investigation is concerned with theoretical concepts which are believed to be consistent with available observations. It has been found that Io, the innermost of the Galilean satellites, is the principal source of plasma for the Jovian magnetosphere. The Io source is considered along with the solar-wind source, the ionospheric source, other satellite sources, and variations of the temperature and the content of the Io plasma torus with time. The rotation of Jupiter as the dominant source of energy for magnetospheric phenomena is discussed along with aspects of the Io-Jupiter interaction. Attention is also given to particle acceleration, and spin periodicity.

Hill, T. W.↗
NASA NTRS1984

The Effects of a Nearly 100% Duty Cycle in Observations of Solar Oscillations

Power spectra of window functions with duty cycles between 80% and 99% and with randomly spaced gaps are compared and their effect on observations of solar oscillations are discussed. It is found that for all the cases, observations of solar oscillations would not be severely impacted as long as the gap structure is random rather than periodic.

Hill, F.↗
DOE OSTI2025

Dynamic Surface Restructuring in Cu(Au) Alloys Driven by Oxygen-Mediated Au Mobility

Alloying plays a crucial role in tuning the surface properties of metals, but the atomic-level mechanisms by which alloying elements influence surface structure dynamics under reactive conditions remain elusive. Using Cu(Au) in oxidizing environments as a model system, we reveal a dynamic oxygen-induced transformation of the topmost atomic layer into a periodically hill-and-valley morphology with reversible switching between undulated and flattened surface states. These interconversions are driven by the retreat of surface Au to the subsurface during oxygen adsorption and its resegregation to the surface upon oxygen desorption. This cyclical mobility establishes a feedback loop, allowing the surface to dynamically reconfigure in response to changes in the oxygen pressure. The results offer a broadly applicable framework for understanding atomic-scale surface restructuring in alloy systems, where differences in the chemical reactivity of alloying elements drive dynamic redistribution between surface and subsurface regions. As a result, this dynamic coupling has practical implications for designing corrosion-resistant coatings and metastable nanostructures with tunable catalytic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1994

Ionoshperic effects of the March 1990 magnetic storm: Comparison of theory and measurement

This paper presents a comparison of the measured and modeled ionospheric response to magnetic storms at Millstone Hill and Arecibo during March 16-23, 1990. Magnetic activity was low until midday Universal Time (UT) on day 18 when Kp reached 6, days 19 and 20 were quiet, but a large storm occurred around midnight UT on day 20 (Kp=7) ad it was a moderately disturbed (Kp=4) for the remainder of the study period. At Millstone Hill, the daytime peak density (Nm F2) showed only a modest 30% decrease in response to the first storm and recovered to prestorm values before the onset of the second storm. The model reproduces the daytime peak electron density well for this period. However, the severe storm on March 20 caused a factor of 4 deplection in electron density, while the model densities were not greatly affected. the inclusion of vibrationally excited nitrogen N2(sup *) in the model was unable to account for the observed large electron density depletions afterward March 20. The storm did not appear to affect the overall magnitude of the electron density at Arecibo very much, but did cause unusual wavelike structure in the peak density and peak height following the storm. The model reproduces the daytime Nm F2 very well for Arecibo, but after sunset the model densities decay too rapidly. This study indicates that successful modeling of severe ionospheric stroms will require better definition of the storm time inputs, especially of the neutral atmosphere.

Richards, P. G.↗
DOE OSTI2020

Orbital Refinement and Stellar Properties for the HD 9446, HD 43691, and HD 179079 Planetary Systems

The Transit Ephemeris Refinement and Monitoring Survey is a project that aims to detect transits of intermediate-long period planets by refining orbital parameters of the known radial velocity planets using additional data from ground-based telescopes, calculating a revised transit ephemeris for the planet, then monitoring the planet host star during the predicted transit window. Here we present the results from three systems that had high probabilities of transiting planets: HD 9446 b and c, HD 43691 b, and HD 179079 b. We provide new radial velocity (RV) measurements that are then used to improve the orbital solution for the known planets. We search the RV data for indications of additional planets in orbit and find that HD 9446 shows a strong linear trend of 4.8σ. Using the newly refined planet orbital solutions, which include a new best-fit solution for the orbital period of HD 9446 c, and an improved transit ephemerides, we found no evidence of transiting planets in the photometry for each system. Transits of HD 9446 b can be ruled out completely and transits HD 9446 c and HD 43691 b can be ruled out for impact parameters up to b = 0.5778 and b = 0.898, respectively, due to gaps in the photometry. A transit of HD 179079 b cannot be ruled out, however, due to the relatively small size of this planet compared to the large star and thus low signal to noise. We determine properties of the three host stars through spectroscopic analysis and find through photometric analysis that HD 9446 exhibits periodic variability.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Evaluating mesoscale model predictions of diurnal speedup events in the Altamont Pass Wind Resource Area of California

Mesoscale model predictions of wind, turbulence, and wind energy capacity factors are evaluated in the Altamont Pass Wind Resource Area of California (APWRA), where the diurnal regional sea breeze and associated terrain-driven speedup flows drive wind energy production during the summer months. Results from the Weather Research and Forecasting model version 4.4 using a novel three-dimensional planetary boundary layer (3D PBL) scheme, which treats both vertical and horizontal turbulent mixing, are compared to those using a well-established one-dimensional (1D) scheme that treats only vertical turbulent mixing. Each configuration is evaluated over a nearly 3-month-long period during the Hill Flow Study, and due to the recurring nature of the observed speedup flows, diurnal composite averaging is used to capture robust trends in model performance. Both model configurations showed similar overall skill. The general timing and direction of the speedup flows is captured, but their magnitude is overestimated within a typical wind turbine rotor layer. Both also fail to capture a persistent observed near-surface jet-like flow, likely due to the limited grid resolution that is typical of mesoscale models. However, the 3D PBL configuration shows several minor improvements over the 1D PBL configuration, including improved wind speed and turbulence kinetic energy profiles during the accelerating phase of the speedup events, as well as reduced positive wind speed bias at surface stations across the APWRA region. Using a mesoscale wind farm parameterization, modeled capacity factors are also compared to monthly data reported to the US Energy Information Administration (EIA) during the study period. Although the monthly trend in the data is captured, both model configurations overestimate capacity factors by roughly 7 %–11 %. Through model evaluation, this study provides confidence in the 3D PBL scheme for wind energy applications in complex terrain and provides guidance for future testing.

17 WIND ENERGY↗
NASA NTRS2006

The Rocks of the Columbia Hills

The Mars Exploration Rover Spirit has identified five distinct rock types in the Columbia Hills of Gusev crater. Clovis Class rock is a poorly-sorted clastic rock that has undergone substantial aqueous alteration. We interpret it to be aqueously-altered ejecta deposits formed by impacts into basaltic materials. Wishstone Class rock is also a poorly-sorted clastic rock that has a distinctive chemical composition that is high in Ti and P and low in Cr. Wishstone Class rock may be pyroclastic in origin. Peace Class rock is a sedimentary material composed of ultramafic sand grains cemented by significant quantities of Mg- and Ca-sulfates. Peace Class rock may have formed when water briefly saturated the ultramafic sands, and evaporated to allow precipitation of the sulfates. Watchtower Class rocks are similar chemically to Wishstone Class rocks, and have undergone widely varying degrees of near-isochemical aqueous alteration. They may also be ejecta deposits, formed by impacts into Wishstone-rich materials and altered by small amounts of water. Backstay Class rocks are basalt/trachybasalt lavas that were emplaced in the Columbia Hills after the other rock classes were, either as impact ejecta or by localized volcanic activity. The geologic record preserved in the rocks of the Columbia Hills reveals a period very early in martian history in which volcanic materials were widespread, impact was a dominant process, and water was commonly present.

Squyres, Steven W.↗