Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pileup”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Event Pileup in AXAF's ACIS CCD Camera

AXAF's high resolution mirrors will focus a point source near the optical axis to a spot that is contained within a radius of about two pixels on the ACIS Charge Coupled Devices (CCD) camera. Because of the small spot size, the accuracy to which fluxes and spectral energy distributions of bright point sources can be measured will be degrad3ed by event pileup. Event pileup occurs when two or more X-ray photons arrive simultaneously in a single detection cell on a CCD readout frame. When pileup occurs, ACIS's event detection algorithm registers the photons as a single X-ray event. The pulse height channel of the event will correspond to an energy E approximately E-1 + E-2...E-n, where n is the number of photons registered per detection cell per readout frame. As a result, pileup artificially hardens the observed spectral energy distribution. I will discuss the effort at the AXAF Science Center Lo calibrate pileup in ACIS using focused, nearly monochromatic X-ray source. I will discuss techniques for modeling and correcting pileup effects in polychromatic spectra.

McNamara, Brian R.↗
NASA NTRS2010

Does the Hall Effect Solve the Flux Pileup Saturation Problem?

It is well known that magnetic flux pileup can significantly speed up the rate of magnetic reconnection in high Lundquist number resistive MHD,allowing reconnection to proceed at a rate which is insensitive to the plasma resistivity over a wide range of Lundquist number. Hence, pileup is a possible solution to the Sweet-Parker time scale problem. Unfortunately, pileup tends to saturate above a critical value of the Lundquist number, S_c, where the value ofS_c depends on initial and boundary conditions, with Sweet-Parker scaling returning above S_c. It has been argued (see Dorelli and Bim [2003] and Dorelli [2003]) that the Hall effect can allow flux pileup to saturate (when the scale of the current sheet approaches ion inertial scale, di) before the reconnection rate begins to stall. However, the resulting saturated reconnection rate, while insensitive to the plasma resistivity, was found to depend strongly on the di. In this presentation, we revisit the problem of magnetic island coalescence (which is a well known example of flux pileup reconnection), addressing the dependence of the maximum coalescence rate on the ratio of di in the "large island" limit in which the following inequality is always satisfied: l_eta di lambda, where I_eta is the resistive diffusion length and lambda is the island wavelength.

Dorelli, John C.↗
NASA NTRS1991

Single-parameter characterization of discrete-dislocation pileup tipfield and its application to physically based micro-mechanics

The equivalence between continuous dislocation pileups and cracks is reviewed. The force on the leading dislocation is defined and a general method of calculation of the force is proposed. The equivalence relations are given. Based on the analysis by Eshelby, Frank, and Nabarro and the numerical calculations by Chou and Li and Armstrong et al, it will be shown that the force, F, on the locked leading dislocation of a discrete pileup is capable of characterizing uniquely the stress, strain, and displacement fields at the tip of the pileup, including the positions of the discrete mobile dislocations behind the leading dislocation. Conversely, the positions of the mobile dislocations can be used to measure F. If the propagation of micro-slips and the initiation of micro-fractures at the tip of a pileup are controlled by resolved shear stress and normal cleavage stress respectively, the resolved shear stress intensity coefficient, ReSIC, and the resolved cleavage stress intensity coefficient, ReCIC, must be constant.

Liu, H. W.↗
NASA NTRS1993

Mirror modes and fast magnetoacoustic waves near the magnetic pileup boundary of comet P/Halley

Large-amplitude ultralow-frequency wave structure observed on both sides of the magnetic pileup boundary of comet P/Halley during the flyby of the Giotto spacecraft have been analyzed using suprathermal electron density and magnetic field observations. Upstream of the boundary, electron density and magnetic field magnitude variations are anticorrelated, while in the pileup region these quantities are clearly correlated. Both in front of and behind the pileup boundary the observed waves are quasi-perpendicular wave structures as a minimum variance analysis shows. A detailed comparison of our observations in the prepileup region with theoretical and numerical results shows that the mirror mode mode waves may have been generated by a mirror instability driven by the pressure anisotropy of the ring-type distributions of the heavy (water group) pickup cometary ions.

Glassmeier, Karl-Heintz↗
NASA NTRS2003

Factors Controlling the Position of the Martian Magnetic Pileup Boundary

The magnetic pileup boundary (MPB) at Mars is the position where the dominant ion of the plasma changes from solar wind protons to heavy ions of planetary origin. As such, it is the obstacle to solar wind ions. We investigate the factors that influence the shape and position of the magnetic pileup boundary at Mars in order to better understand the Martian obstacle to the solar wind. Employing MGS data, we determine how the Martian MPB moves in response to factors including solar wind pressure and crustal magnetic fields. We also study the factors affecting the thickness of the MPB. Further, we compare the magnetic pileup boundary to the magnetic barrier at Venus. Direct comparison aids in our interpretation of the physics involved in the solar wind interaction with planets lacking a significant intrinsic magnetic field.

D H Crider↗
NASA NTRS1990

Characterization of the tip field of a discrete dislocation pileup for the development of physically based micromechanics

It is shown, on the basis of calculations by Eshelby et al. (1951), Armstrong et al. (1966), and Chou and Li (1969), that a single parameter, such as the force on the leading dislocation (F), the crack extension force, or the stress intensity factor, is capable of characterizing uniquely the entire tip field of a discrete dislocation pileup, including the positions of mobile dislocations behind the locked leading dislocation at the tip. Conversely, the position of the i-th mobile dislocation X(i) is related to the value of F and is capable of characterizing the entire stress, strain, and displacement fields at the tip of a discrete dislocation pileup. If the interactions between dislocations are linear elastic, the measured positions of the mobile dislocations can be used to determine the value of F, which can then be used as a quantitative measure of the strength of a dislocation barrier resisting the propagation of a microslip or the nucleation of a microfracture.

Gao, Q.↗
NASA NTRS1990

The development of physically based micro-mechanics - Based on the characteristic tip field of dislocation pileup

Based on the analytical solution by Eshelby et al. (1951) and the numerical calculations by Chou and Li (1969) and Armstrong et al. (1962), it is shown that the force, F, on the locked leading dislocation of a discrete dislocation pileup is capable of characterizing uniquely the stress, strain, and displacement field at the tip of the pileup, including the positions of the discrete mobile dislocations next to the leading dislocation. Conversely, the positions of the mobile dislocations can be used to measure F. The F thus measured can be used to study micro-plastic deformation and micro-fractures at grain boundaries or any other dislocation barriers.

Gao, Q.↗
NASA NTRS2022

Beyond Basic Drag in Interplanetary CME Modeling: Effects of Solar Wind Pileup and High-Speed Streams

Coronal mass ejections (CMEs) cause severe space weather effects throughout our solar system. As a fast CME propagates through interplanetary space, it accumulates solar wind materials at its front. This pileup of materials, or CME-driven sheath, can be important in determining the geoeffectiveness of a CME. We take an existing arrival time model that includes expansion and deformation of the CME flux rope (ANTEATR; Kay & Gopalswamy, 2018, https://doi.org/10.1029/2018JA025780; Kay & Nieves-Chinchilla, 2021a, https://doi.org/10.1029/2020JA028911) and add a pileup procedure (PUP) as a physics-based approach to modeling the CME-driven sheath. ANTEATR-PUP solves the Rankine-Hugoniot equations for an oblique shock to determine the shock speed and sheath density, magnetic field, and temperature. The extra sheath mass affects the background drag calculation. Additionally, ANTEATR can now use any 1D profile for the background solar wind as opposed to the simple empirical models it previously relied upon. We present initial results from ANTEATR-PUP and compare with previous ANTEATR findings. Using results from an MHD simulation, we explore the effects of interactions with a static high-speed stream (HSS) on the CME's and sheath's interplanetary evolution. The drag forces essentially disappear while a CME remains within the HSS, but reappear stronger once the CME exits. The HSS-CME interaction produces the largest changes in the CME and sheath properties at 1 au when it occurs either close to the Sun near the inner simulation boundary at 0.1 au or right before the CME reaches 1 au. We estimate that these changes could significantly affect the geoeffectiveness.

C Kay↗
NASA NTRS1992

Circumnuclear pileups of dust and gas in M82

Red H-alpha and R-band CCD images of the M82 galaxy were obtained and compared with corresponding NIR S III forbidden-line and I-band images and with a smaller Br-gamma infrared-array image of the central 500 pc. Results furnish evidence of circumnuclear pileup in M82, probably toroidal in form, which is dynamically linked to the central (bilobal) starburst and which is now collimating the subsequent eruptions and emergent radiation.

Waller, William H.↗
NASA NTRS1992

Correcting x ray spectra obtained from the AXAF VETA-I mirror calibration for pileup, continuum, background and deadtime

The VETA-I mirror was calibrated with the use of a collimated soft X-ray source produced by electron bombardment of various anode materials. The FWHM, effective area and encircled energy were measured with the use of proportional counters that were scanned with a set of circular apertures. The pulsers from the proportional counters were sent through a multichannel analyzer that produced a pulse height spectrum. In order to characterize the properties of the mirror at different discrete photon energies one desires to extract from the pulse height distribution only those photons that originated from the characteristic line emission of the X-ray target source. We have developed a code that fits a modeled spectrum to the observed X-ray data, extracts the counts that originated from the line emission, and estimates the error in these counts. The function that is fitted to the X-ray spectra includes a Prescott function for the resolution of the detector a second Prescott function for a pileup peak and a X-ray continuum function. The continuum component is determined by calculating the absorption of the target Bremsstrahlung through various filters correcting for the reflectivity of the mirror and convolving with the detector response.

Chartas, G.↗
NASA NTRS1993

Correcting X-ray spectra obtained from the AXAF VETA-I mirror calibration for pileup, continuum, background and deadtime

The VETA-I mirror was calibrated with the use of a collimated soft X-ray source produced by electron bombardment of various anode materials. The FWHM, effective area and encircled energy were measured with the use of proportional counters that were scanned with a set of circular apertures. The pulsers from the proportional counters were sent through a multichannel analyzer that produced a pulse height spectrum. In order to characterize the properties of the mirror at different discrete photon energies one desires to extract from the pulse height distribution only those photons that originated from the characteristic line emission of the X-ray target source. We have developed a code that fits a modeled spectrum to the observed X-ray data, extracts the counts that originated from the line emission, and estimates the error in these counts. The function that is fitted to the X-ray spectra includes a Prescott function for the resolution of the detector a second Prescott function for a pileup peak and a X-ray continuum function. The continuum component is determined by calculating the absorption of the target Bremsstrahlung through various filters, correcting for the reflectivity of the mirror and convolving with the detector response.

Chartas, G.↗
NASA NTRS2014

Open Boundary Particle-in-Cell Simulation of Dipolarization Front Propagation

First results are presented from an ongoing open boundary 2-1/2D particle-in-cell simulation study of dipolarization front (DF) propagation in Earth's magnetotail. At this stage, this study is focused on the compression, or pileup, region preceding the DF current sheet. We find that the earthward acceleration of the plasma in this region is in general agreement with a recent DF force balance model. A gyrophase bunched reflected ion population at the leading edge of the pileup region is reflected by a normal electric field in the pileup region itself, rather than through an interaction with the current sheet. We discuss plasma wave activity at the leading edge of the pileup region that may be driven by gradients, or by reflected ions, or both; the mode has not been identified. The waves oscillate near but above the ion cyclotron frequency with wavelength several ion inertial lengths. We show that the waves oscillate primarily in the perpendicular magnetic field components, do not propagate along the background magnetic field, are right handed elliptically (close to circularly) polarized, exist in a region of high electron and ion beta, and are stationary in the plasma frame moving earthward. We discuss the possibility that the waves are present in plasma sheet data, but have not, thus far, been discovered.

dipolarization front↗
NASA NTRS1991

Densities and abundances of hot cometary ions in the coma of P/Halley

On its flight by P/Halley, the Giotto spacecraft carried a High Energy Range Spectrometer (HERS) for measuring the properties of cometary ions picked up by the solar wind in the nearly collisionless regions of the coma. Preliminary estimates of the ion densities observed by HERS were reevaluated and extended; density profiles along the Giotto trajectory are presented for 13 values of ion mass/charge. Comparison with the physical-chemical model of the interaction of sunlight and the solar wind with the comet by other researchers reveals that, with the exception of protons and H2(+), all ion densities were at least an order of magnitude higher than predicted. The high ion densities cannot be explained on the basis of compression of the plasma, but require additional or stronger ionization mechanisms. Ratios of the densities of different ion species reveal an overabundance of carbonaceous material and an underabundance of H2(+) compared to the predictions of the Schmidt. While the densities of solar wind ions (H(+) and He(++)) changed sharply across a magnetic discontinuity located 1.35(10)(exp 5) km from the comet, this feature, which has been called both the 'cometopause' and the 'magnetic pileup boundary' was barely distinguishable in the density profiles of hot cometary ions. This result is consistent with the interpretation that the magnetic pileup boundary detected by Giotto was caused by a discontinuity in the solar wind and is not an intrinsic feature of the interaction of the solar wind with an active comet.

Neugebauer, M.↗
NASA NTRS2003

A New Method to Resolve X-Ray Halos around Point Sources with Chandra Data and Its Application to Cygnus X-1

With excellent angular resolution, good energy resolution, and a broad energy band, the Chandra Advanced CCD Imaging Spectrometer (ACIS) is the best instrument for studying the X-ray halos around some Galactic X-ray point sources caused by the dust scattering of X-rays in the interstellar medium. However, the direct images of bright sources obtained with the ACIS usually suffer from severe pileup. Making use of the fact that an isotropic image could be reconstructed from its projection in to any direction, we can reconstruct the images of the X-ray halos from the data obtained with the High Energy Transition Grating Spectrometer (HETGS) and/or in continuos clocking (CC) mode. These data have no or less serious pileup and enable us to take full advantage of the excellent angular resolution of Chandra. With the reconstructed high-resolution images, we can probe the X-ray halos as close as 1" to their associated point sources. Applying this method to Cygnus X-1 observed with the Chandra HETGS in CC mode, we derived an energy-dependent radial halo flux distribution and concluded that in a circular region (2' in radius) centered a the point source: (1) relative to the total intensity, the fractional halo intensity is about 15% at keV and drops to aboout 5% at approximately 6 keV (2) about 50% of the halo photons are within the region of a radius less than 40 inches and (3) the spectrum of the pooint source is slightly distorted by the halo contamination.

Yao, Yangsen↗
NASA NTRS2022

Rotation of Low-mass Stars in Upper Centaurus-Lupus and Lower Centaurus-Crux with TESS

We present stellar rotation rates derived from Transiting Exoplanet Survey Satellite (TESS) light curves for stars in Upper Centaurus–Lupus (UCL; ∼136 pc, ∼16 Myr) and Lower Centaurus–Crux (LCC; ∼115 pc, ∼17 Myr). We find spot-modulated periods (P) for ∼90% of members. The range of light-curve and periodogram shapes echoes that found for other clusters with K2, but fewer multiperiod stars may be an indication of the different noise characteristics of TESS, or a result of the source selection methods here. The distribution of P as a function of color as a proxy for mass fits nicely in between that for both older and younger clusters observed by K2, with fast rotators being found among both the highest and lowest masses probed here, and a well-organized distribution of M-star rotation rates. About 13% of the stars have an infrared excess, suggesting a circumstellar disk; this is well matched to expectations, given the age of the stars. There is an obvious pileup of disked M stars at P ∼ 2 days, and the pileup may move to shorter P as the mass decreases. There is also a strong concentration of disk-free M stars at P ∼ 2 days, hinting that perhaps these stars have recently freed themselves from their disks. Exploring the rotation rates of stars in UCL/LCC has the potential to help us understand the beginning of the end of the influence of disks on rotation, and the timescale on which stars respond to unlocking.

L M Rebull↗
NASA NTRS1972

The fine structure of slip lines in disordered Cu3Au.

The fine structure of the slip bands observed on the surface of a deformed Cu3Au single crystal is examined. The separation distance determined between the resolved individual slip lines is used to examine the calculations of other authors relating the passing stress of a dislocation past a dislocation pileup on a nearby parallel glide plane.

Salama, K.↗