Search NASA⌕ Search

SEARCH · Search NASA

Results for “Placement Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Sensor Placement Optimization Study for the Built Environment: Next Steps Report

Systems of fixed-position radiation sensors can provide information that assists emergency responders following nuclear incidents. First responder organizations that implement systems of fixed-position sensors face numerous decisions regarding sensor selection, quantity, and placement. Researchers at Pacific Northwest National Laboratory (PNNL) have evaluated the performance of several hypothetical sensor systems during a simulated activation of a radiological dispersal device. Due to technical limitations, PNNL’s analysis was limited to a single location and number of scenarios. This document describes additional research and analysis that would result in improved guidance to first responder organizations considering installation of radiation monitoring systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Sensor Placement Optimization Study for the Built Environment: Operational Use Cases

Systems of fixed-position radiation sensors can provide information that assists emergency responders following nuclear and radiological incidents. State, local, tribal, and territorial (SLTT) government agencies that implement systems of fixed-position sensors are faced with numerous decisions regarding sensor selection, quantity, and placement. To develop guidance on implementation of radiation detection systems, we simulated the release of radioactive material in an urban environment using a combination of three models: the Weather Research Forecasting (WRF), Quick Urban and Industrial Complex (QUIC), and Monte Carlo N-Particle (MCNP) models. We then evaluated the performance of several hypothetical sensor systems. The small number of simulations we conducted are not sufficient to generate definitive design guidance for radiation sensor systems, but we did identify trends that would be of interest to emergency planners. For a scenario that releases 1000 curies of Cs-137, radiation detectors were needed at 500-meter intervals to have a high likelihood of event detection and to estimate source location and plume detection. We also noted that optimal detector altitude varied with distance to the source. We recommend additional research in this area be conducted to support developing sensor placement guidelines that expand on a range of locations, isotopes, activity levels, and different weather conditions. Original simulation strategies included a range of environments, additional radioisotopes (Am241 and AmBe), and a larger selection of sensor types. These types of expansions would support SLTT guidance on sensor system recommendations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Storage Sizing and Placement Simulation: Quick-Start Case Study User’s Guide

The Storage Sizing and Placement Simulation (SSIM) application allows a user to define the possible sizes and locations of energy storage elements on an existing grid model defined in OpenDSS. Given these possibilities, the software will automatically search through them and attempt to determine which configurations result in the best overall grid performance. This quick-start guide will go through, in detail, the creation of an SSIM model based on a modified version of the IEEE 34 bus test feeder system. There are two primary parts of this document. The first is a complete list of instructions with little-to-no explanation of the meanings of the actions requested. The second is a detailed description of each input and action stating the intent and effect of each. There are links between the two sections.

25 ENERGY STORAGE↗
DOE OSTI2022

Advances in Secure 5G Network for a Nationwide Drone Corridor

Recent research has validated the proposal to add a separate set of antennas for 5G coverage in the air, while the conventional set of antennas continues to provide coverage on the ground, for a nationwide drone corridor for 5G cellular drones. More importantly, this drone corridor can be made secure and reliable by adapting the drone trajectories to avoid interference and security attacks, and with advanced precoding and physical layer security. Energy efficiency can also be improved with low-resolution massive multiple-input multiple-output (MIMO) systems that utilize low resolution digital to analog converters. This paper describes additional research findings to further support the creation of this nationwide drone corridor. We design optimal drone trajectory within the drone corridor to improve safety for pedestrians and vehicles on the ground. We derive the optimum antenna uptilt angle to minimize outage probability for a given drone corridor. We also study the placement of intelligent reflector surfaces in an urban drone corridor in order to improve the multi-path scattering and hence the spatial multiplexing gains for serving drones. We calculate trajectories to maximize data rate in the presence of smart interference when drones are used as relays and each drone may be deployed in the paths of data flows from multiple BSs to multiple UEs. Next we demonstrate how the use of the additional set of antennas along with the 3GPP standard based subframe blanking method can minimize the interference from ground reflection of the radio frequency (RF) radiation from the downtilted antennas. The paper concludes with plans to continue with experimental studies to advance this work further.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Cosmic Frontier Project at SMU

The SMU group led by Professor Robert Kehoe continued to work to constrain dark energy measurements of the Dark Energy Spectroscopic Instrument (DESI). These constraints are obtained by measuring the expected peak in characteristic distance scale between galaxies, the ‘BAO peak’, as a function of redshift for four different types of galaxy. DESI will cover the redshift range to z<3.5 with approximately 40 million galaxy spectra. SMU’s primary emphasis during the funding period was on the early DESI data, including the development of software that would allow the measurement of the impact of incomplete targeting of galaxies in the survey. We provided software to calculate the weights that are critical to permit us to correctly compare data to the theoretical calculations of dark matter halos. SMU also began development of software that can be integrated into the analysis pipeline that uses alternate targeting to generate these weights. Baryonic physics has a critical impact on galaxy development and placement within dark matter halos. SMU also increased its efforts in the area of modeling this galaxy-halo connection in two areas. The primary emphasis was to work on a sub-halo abundance matching scheme using dark matter simulation with very fine mass resolution (‘Uchuu’). Our effort here is to produce models for use by DESI that more correctly account for the subhalo structure of dark matter distribution, and its manifestation in satellite galaxies. Our initial effort had been for emission line galaxies. In the funding period, we were able to produce first halo-occupation distribution models. This work is slated to contribute to DESI Key Project papers. We also furthered our ongoing effort to study galaxy placement in halos using semi-analytic methods. Kehoe’s group also continued to maintain its strong role in DESI Operations, with SMU postdoc serving as a Lead Observing Scientist.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

A Scalable Meter Placement Method for Distribution System State Estimation

This paper studies the optimal meter placement problem for distribution system state estimation given limited measurement resources. We formulate the problem as a mixed integer semi-definite programming that minimizes the worst case estimation errors over a set of operating points. To solve the problem, we first relax the problem as a convex optimization problem. Motivated by the lack of scalability of existing solvers, we next leverage the special structure of the cost function and propose an algorithm based on barrier method that solves the problem with significantly better numerical performance. The proposed method has been validated on the IEEE 13-bus, IEEE 123-bus, and IEEE 8,500-bus feeders.

barrier method↗
DOE OSTI2022

Generating Sequential PV Deployment Scenarios for High Renewable Distribution Grid Planning

This paper introduces a novel approach for generating solar photovoltaic (PV) plant deployment scenarios for grid integration planning. The approach guarantees consistency among scenarios of the same deployment by ensuring that higher penetration scenarios contain PV units deployed in lower penetration scenarios. It also constrains the size and spatial distribution of the PV plants and considers three placement types. A case study on a real-world distribution system proves that the precepts of scenario consistency, deployment diversity, and placement are met. The study further investigates the impact of the resulting scenarios via a stochastic hosting capacity analysis. Results indicate that the ratio between PV and load sizes, referred to as the nodal PV penetration factor (NPPF), is a key driver of the grid integration impact. By reducing the NPPF from 5 to 2, the maximum hosting capacity increased by at least 112%. The study also reveals that scenarios under random placement can lead to higher hosting capacity values.

ENERGY PLANNING, POLICY, AND ECONOMY,SOLAR ENERGY↗
DOE OSTI2022

Generating Sequential PV Deployment Scenarios for High Renewable Distribution Grid Planning: Preprint

This paper introduces a novel approach for generating solar photovoltaic (PV) plant deployment scenarios for grid integration planning. The approach guarantees consistency among scenarios of the same deployment by ensuring that higher penetration scenarios contain PV units deployed in lower penetration scenarios. It also constrains the size and spatial distribution of the PV plants and considers three placement types. A case study on a real-world distribution system proves that the precepts of scenario consistency, deployment diversity, and placement are met. The study further investigates the impact of the resulting scenarios via a stochastic hosting capacity analysis. Results indicate that the ratio between PV and load sizes, referred to as the nodal PV penetration factor (NPPF), is a key driver of the grid integration impact. By reducing the NPPF from 5 to 2, the maximum hosting capacity increased by at least 112%. The study also reveals that scenarios under random placement can lead to higher hosting capacity values.

ENERGY PLANNING, POLICY, AND ECONOMY,SOLAR ENERGY↗
DOE OSTI2022

Effect of void positioning on the detonation sensitivity of a heterogeneous energetic material

We show although it is well-established that voids profoundly influence the initiation and reaction behaviors of heterogeneous energetic materials such as polymer-bonded explosives (PBX) and propellants, there has been little study of how void location in different constituents in the microstructures of such materials affect the macroscale behavior. Here, we use three-dimensional (3D) mesoscale simulations to study how void placement within the reactive grains versus the polymer binder influences the shock-to-detonation transition (SDT) in a polymer-bonded explosive. The material studied here has a microstructure comprised of 75% PETN (pentaerythritol tetranitrate) grains and 25% HTPB (hydroxyl-terminated polybutadiene) polymer binder by volume. Porosities up to 10% in the form of spherical voids distributed in both the grains and polymer are considered. An Arrhenius reactive burn relation is used to model the chemical kinetics of the PETN grains under shock loading, thereby resolving the heterogeneous detonation behavior of the PBX. The influence of void location on the shock initiation sensitivity of the material is quantitatively ranked by comparing the predicted run distance to detonation (RDD) for each sample. The analysis includes inherent quantification of uncertainties arising from the stochastic variations in the microstructure morphologies and void distributions by using statistically equivalent microstructure sample sets (SEMSS), leading to probabilistic formulations for the RDD as a function of shock pressure. The calculations reveal that the location of voids in the composite microstructure significantly affects the RDD. Specifically, voids exclusively within the grains cause the PBX to be more sensitive (having shorter RDD) than voids in the polymer binder. Unique probabilistic relationships are derived to map the probability of observing RDD for each void location material case, allowing for prediction of initiation behavior anywhere in the shock pressure – RDD space. These findings agree with trends reported in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Designing an Optimal Sensor Network via Minimizing Information Loss

Optimal experimental design is a classic topic in statistics, with many well-studied problems, applications, and solutions. The design problem we study is the placement of sensors to monitor spatiotemporal processes, explicitly accounting for the temporal dimension in our modeling and optimization. We observe that recent advancements in computational sciences often yield large datasets based on physics-based simulations, which are rarely leveraged in experimental design. We introduce a novel model-based sensor placement criterion, along with a highly-efficient optimization algorithm, which integrates physics-based simulations and Bayesian experimental design principles to identify sensor networks that “minimize information loss” from simulated data. Our technique relies on sparse variational inference and (separable) Gauss-Markov priors, and thus may adapt many techniques from Bayesian experimental design. We validate our method through a case study monitoring air temperature in Phoenix, Arizona, using state-of-the-art physics-based simulations. Our results show our framework to be superior to random or quasi-random sampling, particularly with a limited number of sensors. We conclude by discussing practical considerations and implications of our framework, including more complex modeling tools and real-world deployments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Evaluating the Impact of Proprietary Oil & Gas Data on Machine Learning Model Performance Using a Quasi-Experimental Analytical Approach

This study implements a data-intensive supervised ML approach through a quasi-experimental framework with the objective of quantifying the impact of oil and gas operator-specific proprietary data on ML-based predictive model performance relative to using oil and gas datasets that may be more commonly publicly available. The models are designed to jointly predict daily oil, gas, and water production for horizontal wells as a function of bottom-hole pressure drawdown, spatial placement across the study domain, and well completion attributes. Model performance is quantified on holdout test data to evaluate how each dataset affects resulting model variant performance.

02 PETROLEUM↗
DOE OSTI2023

Evaluating Production Implications of Pressure Maintenance in Unconventional Oil and Gas Wells using a Machine Learning Modeling Approach: Case Study in the Permian Basin

This study implements the proprietary machine learning-based model (model) developed under the 2022 study titled “Evaluating the Impact of Proprietary Oil & Gas Data on Machine Learning Model Performance Using a Quasi-Experimental Analytical Approach” for forecasting unconventional oil and gas production using well data from the Permian Basin. The model, developed using an exclusive dataset that includes time series production data from an operator in the Permian Basin, is designed to jointly predict daily oil, gas, and water production for horizontal wells as a function of bottomhole pressure drawdown, spatial placement across the study domain, and well-completion attributes. In this study, the model was explicitly applied to explore its utility to evaluate the impact of varying drawdown strategies on the production forecast of a well in the Permian Basin dataset. Managing pressure drawdown has been identified as a way to improve estimated ultimate recovery (EUR) from unconventional shale wells due to the stress-dependent nature of fractures in shale reservoirs. Research has shown that applying a lower pressure drawdown helps to maintain the reservoir conductivity, resulting in higher productivity over the life of a well. Historic bottomhole pressure data from the well over time was used as a benchmark from which to set more and less aggressive pressure decline rates as bounding modeling cases. All pressure decline rates/strategies were forecasted over 5 years, and the model was used to generate oil, water, and gas prediction over the same timeframe. This report presents the results from the production forecast and discusses potential operational and economic implications, with contrasting perspectives between well productivity and profitability given typical oil and gas economics and the volatility in the oil and gas market.

02 PETROLEUM↗
DOE OSTI2025

Single-Atom Doping at the Molecule–Metal Interface: How Rh Affects Surface Explosion Kinetics

Controlling chemical reactions at interfaces is central to many fields, including atmospheric, environmental, and biological chemistry as well as catalysis and corrosion. We performed a fundamental study of how catalytically active Rh atoms placed at and above a molecule-metal interface influence the surface reaction kinetics of tartaric acid (TA) decomposition. Specifically, TA decomposition on Cu(100) exhibits autocatalytic decomposition kinetics involving a slow initiation step followed by fast decomposition of the molecular layer. These so-called “surface explosions” are extremely sensitive to initial conditions, making it fundamentally interesting to study how the placement of reactive atoms affects the reaction rate. Temperature-programmed reaction (TPR) experiments reveal that Rh atoms embedded in the Cu(100) surface beneath TA (TA/Rh/Cu) or atop the TA layer (Rh/TA/Cu) reduce the decomposition temperature and modify the reaction rate constants. Isothermal TPR analysis reveals that Rh enhances both the initiation rate constant, k i , and the explosion rate constant, k e , facilitating explosive decomposition at lower temperatures. This result provides evidence that both the initiation and explosion steps occur at the metal-molecule interface and are accelerated by the presence of Rh at this interface. This study illustrates how small amounts of reactive elements may be used to control nonlinear kinetic processes at interfaces.

desorption↗
DOE OSTI2021

Efficient Topology Design Algorithms for Power Grid Stability

The dynamic response of power grids to small disturbances influences their overall stability. This letter examines the effect of network topology on the linearized time-invariant dynamics of electric power systems. The proposed framework utilizes H 2 -norm based stability metrics to study the optimal placement of lines on existing networks as well as the topology design of new networks. The design task is first posed as an NP-hard mixed-integer nonlinear program (MINLP) that is exactly reformulated as a mixed-integer linear program (MILP) using McCormick linearization. To improve computation time, graph-theoretic properties are exploited to derive valid inequalities (cuts) and tighten bounds on the continuous optimization variables. Moreover, a cutting plane generation procedure is put forth that is able to interject the MILP solver and augment additional constraints to the problem on-the-fly. Finally, the efficacy of our approach in designing optimal grid topologies is demonstrated through numerical tests on the IEEE 39-bus network.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Flow and thermal modelling of the argon volume in the DarkSide-20k TPC

The DarkSide-20k dark matter experiment, currently under construction at LNGS, features a dual-phase time projection chamber (TPC) with a ∼ 50 t argon target from an underground well. At this scale, it is crucial to optimise the argon flow pattern for efficient target purification and for fast distribution of internal gaseous calibration sources with lifetimes of the order of hours. To this end, we have performed computational fluid dynamics simulations and heat transfer calculations. The residence time distribution shows that the detector is well-mixed on time-scales of the turnover time (∼ 40 d). Notably, simulations show that despite a two-order-of-magnitude difference between the turnover time and the half-life of 83m Kr of 1.83 h, source atoms have the highest probability to reach the centre of the TPC 13 min after their injection, allowing for a homogeneous distribution before undergoing radioactive decay. We further analyse the thermal aspects of dual-phase operation and define the requirements for the formation of a stable gas pocket on top of the liquid. We find a best-estimate value for the heat transfer rate at the liquid-gas interface of 62 W with an upper limit of 144 W and a minimum gas pocket inlet temperature of 89 K to avoid condensation on the acrylic anode. This study also informs the placement of liquid inlets and outlets in the TPC. The presented techniques are widely applicable to other large-scale, noble-liquid detectors.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Characterizing the Defense Hierarchy of Populus trichocarpa

The U.S. Departments of Energy and Agriculture are developing bioenergy crops as a sustainable alternative to traditional fossil fuels. Plant disease threatens this effort by inhibiting the efficient production of plant feedstocks for bioenergy. In particular, biotrophic Melampsora leaf rust pathogens can increase morbidity in Populus trichocarpa and its hybrids (aka poplars), the primary woody feedstocks for bioenergy. Controlling rust disease in plantations is thus critical to the success of the poplar bioenergy program. Current efforts to control rust disease focus on plant genetic resistance. However, with novel pathogenic variation generated by the global movement of pathogens and their hybridization, it is increasingly clear that controlling rust disease in a long-lived plant like Populus depends on our ability to understand and manage not only genes for rust resistance, but also short-lived plant microorganisms that contribute to defense against rust (aka “defense mutualists”). Our proposed research thus seeks to develop an integrative, hierarchical model of P. trichocarpa defense that integrates genetic resistance and defense mutualists. Our overarching hypothesis is that defense against Melampsora rust is biologically degenerate, with major and minor plant resistance genes, plant defense compounds, and defense mutualists within the microbiome each contributing to rust resistance under different circumstances. The specific aims of our study will test the placement of each of these factors in the defense hierarchy. Ultimately, it is our hope that disease management strategies harnessing both resistance genes and naturally occurring defense mutualists of P. trichocarpa, and an appreciation of the ecological circumstances in which each is effective, will maximize plant resistance and productivity while minimizing impacts on the surrounding ecological landscape.

59 BASIC BIOLOGICAL SCIENCES↗