VELOCITY DISTRIBUTIONS OF THE INTERPLANETARY PLASMA DETECTED BY EXPLORER 10
The plasma data recorded by the explorer x with regard to the velocity and angular distribution of the plasma ions
PLASMA PROBE↗
SEARCH · Search NASA
Results for “Plasma detection”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Velocity distributions of the interplanetary plasma detected by explorer 10.
Analysis of plasma data recorded by explorer x with regard to velocity and angular distribution of plasma ions
EXPLORER X SATELLITE↗
Unconventional PDV applications: detecting plasma and radiation.
Abstract not provided.
Bell, Kate Suzanne↗
Gravitational wave detection with plasma haloscopes
Searches for high frequency gravitational waves using cavities based on the Gertsenshtein effect were recently proposed, building off existing axion dark matter experiments. In particular, the sensitivity of axion dark matter experiments using metamaterial plasmas (tunable plasma haloscopes) to gravitational waves has not been explored in detail. Here we perform a full analysis of gravitational wave detection in plasma haloscopes, showing that the baseline design of experiments such as ALPHA is several orders of magnitude less sensitive than previously thought. We show how simple changes to the experiment can recover that sensitivity and lead to a powerful gravitational wave detector in the 𝒪(10–50) GHz frequency range.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
In situ Detection of Plasma Induced Surface Interaction based on Deep Learning based Visual Diagnostics (Technical Report)
It is characteristic for many plasma devices to undergo plasma-material interaction leading to surface erosion. These processes, often not easily detectable, lead to changes in device performance and lifespan. State-of-the-art lifetime tests and wear experiments require over 1000s hours. A self-consistent model for accurately predicting the erosion's effects is not available. In situ detection of these processes is not a trivial task since the surface variations at the early stages have a micron scale. Such limitations not only restrict testing and prediction capabilities but also slow the development of new thrusters and limit mission duration. To address these challenges, an in-situ diagnostic for real-time erosion assessment has been developed, aiming to expedite lifetime testing and broaden experimental campaigns. Several works were dedicated to real-time and in situ monitoring of material erosion during plasma exposure using laser holography, microscopy, and with telemicroscopes. However, the applicability of these approaches is limited due to complexity, cost and less flexibility as they often require placing diagnostic equipment inside the vacuum chamber. In collaboration with Princeton Collaborative Research Facility (PCRF), Princeton Plasma Physics Laboratory (PPPL), a new diagnostic approach is developed, where geometry modifications to the ceramic channel walls were introduced that would result in accelerated channel erosion. We employed Long-distance microscope (LDM) imagery, combined with Deep-Learning based Shape from focus or depth from focus (DFF or SFF) approach, that provides an accessible and cost-effective solution. LDM employs focus variation techniques to continuously capture multiple images of the target object at distinct focal planes. DFF, an optical focus variation method, generates a 3D topographical surface depth map from a sequence of variably focused images. Combined with the developed diagnostic, this approach offers a controllable means to study erosion under accelerated conditions. In this work, we develop Neural Network-based DFF algorithm applicable for LDM data to quantitatively evaluate plasma induced surface modification from LDM data. Next, we develop Deep Learning-based super-resolution depth map image reconstruction technique to increase the resolution of depth maps obtained from DFF algorithm to improve the accuracy of erosion measurements. Thirdly, we develop several image processing techniques to remove noise and improve the quality of depth map image. Here we report the results of initial tests for this approach. An experimental setup designed and built in PPPL was employed that consists of a 3-cm gridded ion source that produces a neutralized argon beam with energies up to 600 eV. A hexagonal boron nitride (h-BN) ceramic target, designed based on computational predictions, was used. Tests were conducted to reconstruct the complex geometry of the target under the lighting conditions of the operated ion source.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Use of Sonification for Analysis and Detection of Plasma Bubbles at 21 MHz
This research explores sonification as a useful tool for space science data exploration. Our interest lies in basic scientific analysis of plasmas of the ionosphere, of interplanetary space and of the interstellar medium. These plasmas all contain irregularities. Propagation of electromagnetic waves, like optical or radio waves, through a medium with random fluctuations in refractive index results in amplitude and phase fluctuations (Scheuer 1968). These variations may be displayed via sonification, using changes in sounds to represent the data variations. This is particularly useful extending science to the visually-impaired. The xSonify Java-based tool was developed to explore sonification techniques and its value for general science analysis and also assistive technology.
Wanda, Diaz↗
Auroral zone plasma waves detected at polar: PCBL waves
Polar Cap Boundary Layer waves are ELF/VLF electric and magnetic waves detected on field lines adjacent to the polar cap, thus their name.
Magnetopause↗
Charge collection during hypervelocity penetrations of thin foils
The following represents trajectory sensor development work for the space-station-based Cosmic Dust Collection Facility (CDCF). This facility-class payload was to expose some 7 sq m of NASA-provided general-user instruments in addition to three instruments provided by formally selected principal investigators. The preferred trajectory sensor for this general-user instrument envisioned the detection of impact-triggered plasma for both velocity measurement and location instruments. Space station developments in late 1992/early 1993 lead to cancellation of this potential flight project, for both technical and fiscal reasons. This precipitated termination of all plasma detection work at JSC on behalf of CDCF's general-user instrument. The following comprises three informal reports that summarize the CDCF efforts regarding plasma sensing for trajectory determinations. The reports were initially written for internal CDCF use and were not widely distributed. Because no formal publications are envisioned at present, the three reports are included in full in this document. They not only demonstrate that substantial progress was accomplished in the development of plasma trajectory sensors during 1990-1992, but the results are hopefully of interest and use to others who may continue these developments. The chronological sequence of these three reports is reversed, with the first containing the latest information.
Peterson, Robert B.↗
Plasma ignition and detection for in-situ cleaning of 1.3 GHz 9-cell cavities
Superconducting Radio Frequency (SRF) cavities performance preservation is crucial, from vertical test to accelerator operation. Field Emission (FE) is still one of the performance limiting factors to overcome and plasma cleaning has been proven successful by the Spallation Neutron Source (SNS), in cleaning field emitters and increasing the work function of Nb. A collaboration has been established between Fermi National Accelerator Laboratory (FNAL), SLAC National Accelerator Laboratory and Oak Ridge National Laboratory (ORNL) with the purpose of applying plasma processing to the Linac Coherent Light Source-II (LCLS-II) cavities, in order to minimize and overcome field emission without affecting the high Q of nitrogen-doped cavities. The cleaning for LCLS-II will follow the same plasma composition adopted at SNS, which allows in-situ processing of cavities installed in cryomodules from hydrocarbon contaminants. A novel method for plasma ignition has been developed at FNAL: a plasma glow discharge is ignited using high order modes to overcome limitations imposed by the fundamental power coupler, allowing in-situ cleaning for cavities in cryomodule. The plasma can be easily ignited and tuned in each of the cavity cells using low RF power. A method for plasma detection has been developed as well, which allows the detection of the plasma location in the cavity without the need of cameras at both cavity ends. The presented method can be applied to other multi-cell cavity designs, even for accelerators where the coupling for the fundamental modes at room temperature is very weak.
43 PARTICLE ACCELERATORS↗
Low RF Power Plasma Ignition and Detection for In-Situ Cleaning of 1.3 GHz 9-Cell Cavities
Superconducting Radio Frequency (SRF) cavities performance preservation is crucial, from vertical test to accelerator operation. Field Emission (FE) is still one of the performance limiting factors to overcome and plasma cleaning has been proven successful by the Spallation Neutron Source (SNS), in cleaning field emitters and increasing the work function of Nb. A collaboration has been established between Fermi National Accelerator Laboratory (FNAL), SLAC National Accelerator Lab- oratory and Oak Ridge National Laboratory (ORNL) with the purpose of applying plasma processing to the Linac Coherent Light Source-II (LCLS-II) cavities, in order to minimize and overcome field emission without affecting the high Q of nitrogen-doped cavities. The cleaning for LCLS-II will follow the same plasma composition adopted at SNS, which allows in-situ processing of cavities installed in cryomod-ules from hydrocarbon contaminants. A novel method for plasma ignition has been developed at FNAL: a plasma glow discharge is ignited using high order modes to overcome limitations imposed by the fundamental power coupler, allowing in-situ cleaning for cavities in cryomodule. The plasma can be easily ignited and tuned in each of the cavity cells using low RF power. A method for plasma detection has been developed as well, which allows the detection of the plasma location in the cavity without the need of cameras at both cavity ends. The presented method can be applied to other multi-cell cavity designs, even for accelerators where the coupling for the fundamental modes at room temperature is very weak.
43 PARTICLE ACCELERATORS↗
A Detection of the Same Hot Plasma in the Corona: During a CME and Later at Ulysses
We show direct evidence for the same very hot plasma being detected remotely from SOHO in the corona and subsequently, at Ulysses in the solar wind. This is, to our knowledge, the first time that such an unambiguous identification has been made in the case of hot plasma. This detection complements studies correlating other plasma and field properties observed to the properties measured at the source in the corona. This observation takes advantage of a SOHO-Sun-Ulysses quadrature, during which the Sun-Ulysses included angle is $90^\circ$ and it is possible to observe with Ulysses instruments the same plasma that has previously been remotely observed with SOHO instruments in the corona on the limb of the Sun. The identification builds on an existing base of separate SOHO and interplanetary detections of hot plasma. SOHO/UVCS has found evidence for very hot coronal plasma in current sheets in the aftermath of CMEs in the [Fe XVIII] $\lambda$ \AA\ line, implying a temperature on the order of $6\times 10(exp 6)$ K. This temperature is unusually high even for active regions, but is compatible with the high temperature predicted in current sheets. In the solar wind, ACE data from early 1998 to middle 2000 revealed high frozen-in Fe charge state in many cases to be present in interplanetary plasma.
Suess, S. T.↗
Distributed Magnetic Measurements Using Fiber Optic Pulsed Polarimetry (Final Report)
Measurement of the magnetic fields surrounding magnetic fusion energy (MFE) devices, such as tokamaks, is critical for characterizing and monitoring the plasma inside these devices, and it is especially important for detecting plasma instabilities, which can lead to the plasma damaging the inside of these devices. This program successfully demonstrated a new type of magnetic field diagnostic that is capable for the first time of measuring simultaneously the spatial and temporal magnetic field distributions of MFE devices in real-time and with high resolution. This is a capability not feasible with existing magnetic field diagnostics and, moreover, the technique we developed provides other advantages, such as less susceptibility to noise, the ability to operate during both pulsed and steady-state plasma conditions, the ability to detect relatively weak poloidal fields, and potentially lower costs. This new capability of being able in real-time to detect anomalies in the magnetic field distribution corresponding to the onset of plasma instabilities offers the ability to automatically shut down the MFE device before the plasma can damage the machine. Hence, this machine protection capability can be vital for future fusion power stations. Our technique uses optical fibers where changes in the polarization of the laser light traveling through the fiber provide a direct measurement of the magnetic field at any point along the fiber. The small size of the fibers allows them to be easily installed either outside or inside the MFE vacuum vessel, and in any direction one wishes (e.g., poloidal or toroidal). We demonstrated the basic capabilities of our new diagnostic during a proof-of-principle experiment performed on the General Atomics DIII-D tokamak, and published the results in: W. D. Kimura, D. S. Dhillon, S. Munaretto, E. J. Strait, D. Du, S. Loranger, J.-S. Boisvert, and R. Kashyap, “Measurements of DIII-D poloidal field by fiber-optic pulsed polarimetry,” Rev. Sci, Inst. 89, 10J102 (2018).
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Correlated whistler and electron plasma oscillation bursts detected on ISEE-3
The ISEE-3 plasma wave instrument detects associated bursts of electron plasma oscillations and whistler mode waves at an average rate of event one every two days. The plasma wave measurements give the electron number density, and simultaneously measured E and B amplitudes are used to deduce an index of refraction consistent with whistler mode propagation for the measured number density and magnetic field. Burst durations are a few minutes, with some trains of bursts lasting up to an hour. Individual spectral scans (two per second) reveal that the whistler and plasma wave amplitude-time profiles differ within a burst. Peak plasma wave amplitudes are near one mV/m, and the peak whistler mode energy density exceeds that of the plasma oscillations by about a factor 100. The frequency of the whistler mode wave observed in one well diagnosed event agrees with the predictions of the heat flux whistler instability theory. The associated plasma wave instability probably requires a bump-on-tail feature in the heat flux electron component, possibly due to impulsive heating elsewhere on the field-line connecting to ISEE-3.
Kennel, C. F.↗
An alternative interpretation of Jupiter's 'plasmapause'
It has recently been suggested that Io is an important source of ions for the plasma detected by Pioneer 10 in the inner magnetosphere of Jupiter. Assuming this to be true, we show that near the orbit of Io the central collector of the Pioneer-10 plasma instrument could detect only inwardly diffusing ions created at a radial distance greater than that of the spacecraft. The rapid decrease in ion density observed beyond Io's orbit is attributed, at least partially, to this effect and thus may not represent a real plasma boundary such as a 'plasmapause'. Instead, the drop in observed ion density could correspond to a decrease in the density of Io-associated neutral particles orbiting Jupiter.
Neugebauer, M.↗
Plasma wave turbulence at Jupiter's bow shock
Voyager 1 measurements of wave-particle interactions of Jupiter's bow shock are reported. Some of the wave phenomena detected during the spacecraft's third inbound passage are discussed. The results indicate that the Jovian magnetosheath was characterized by a virtual absence of detectable plasma wave turbulence after passage through the bow shock and that there were impulsive wave structures within the shock with durations as small as 1, 2, or 3 sec.
Scarf, F. L.↗
Interplanetary gas. XXV - A solar wind and interplanetary magnetic field interpretation of cometary light outbursts
Possible relationships of cometary brightness outbursts with the solar wind and interplanetary magnetic field are examined. Two types of outburst are distinguished: those which involve a significant brightening of both the head and the tail in a comet with a conspicuous plasma tail (Class I), and those involving the brightening of the central condensation of a previously faint comet with no detectable plasma tail (Class II). Class I bursts, as exemplified by Comet Morehouse 1908c, are attributed to the generation in the head of enhanced amounts of ions and their injection into the tail shortly before it disconnects, with ionization provided by sector boundary crossings. Class II events, as exhibited by Comet P/Tuttle-Giacobini-Kresak 1973b, are interpreted as the result of the bombardment of the nucleus by disturbed solar wind near corotated high-speed streams and sector boundaries, leading to highly exothermic chemical reactions.
Niedner, M. B., Jr.↗
Analysis of Liquids Using the Submerged Plasma for Isotopic Detection and Elemental Resolution (SPIDER)
We developed a sensor called the Submerged Plasma for Isotopic Detection and Elemental Resolution (SPIDER) probe, which uses an atmospheric pressure glow discharge below the surface of liquids to excite species in the liquid. Through emission spectroscopy of molten salts, liquid metals, and heavy water, we demonstrated the SPIDER probe’s high resolution, accuracy, and versatility. We successfully identified trace concentrations of transition and rare-earth metals in molten salts and detected the isotopic shift of the H β → D β emission line. Our analysis revealed unconventional spectral alkali line shapes, indicating two competing excitation modes: film explosion and droplet vaporization. The film explosion mode, characterized by dense plasma, exhibited self-reversal and broadband continuum emission, while the droplet vaporization mode, associated with diffusive plasma, produced narrow-line emissions. Furthermore, by analyzing circuit transients alongside individual plasma events, we observed that film explosions generate higher currents, likely due to a shorter plasma length as the current preferentially flows through the thin liquid layer. Altogether, our results highlight the SPIDER probe’s efficacy and flexibility, making it well-suited for online material quantification of liquids in extreme environments.
AES↗
A search for Beta Pictoris analogs
The results are presented of the survey of known shell stars detected by the Infrared Astronomy Satellite (IRAS) at sufficient bandpasses to permit evaluation of the nature of the infrared excess, and having archival International Ultraviolet Explorer (IUE) high dispersion spectra suitable for identifying stars with infalling circumstellar plasma. Detection of infall in shell stars with infrared signatures of circumstellar dust is described. One star which shows infalling plasma, but apparently no circumstellar dust is described. The implications for the understanding of Beta Pictoris and similar systems are discussed.
Cheng, Kwang-Ping↗