Studying Pt-based fuel cell electrode degradation with nanoscale X-ray computed tomography
Not Available
25 ENERGY STORAGE↗
SEARCH · Search NASA
Results for “Platinum band”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ambipolar Transport in Polycrystalline GeSn Transistors for Complementary Metal-Oxide-Semiconductor Applications
Group-IV alloy GeSn is a promising material for electronic and optoelectronic applications due to its compatibility with both Si substrates and established Si fabrication processes. This study focuses on polycrystalline GeSn (10% Sn), which offers a cost-effective, large-area, and versatile alternative to epitaxial GeSn. We demonstrate ambipolar transport behavior in polycrystalline GeSn thin film transistors, achieving electron and hole field-effect mobilities reaching up to 0.05 cm 2 /Vs and 2.05 cm 2 /Vs, respectively. Through temperature-dependent analysis, we elucidate the underlying mechanism of this phenomenon, which we attribute to quantum tunneling between the Schottky barrier contact and the channel, as well as potential barriers between the grain boundaries of this polycrystalline film, thereby advancing the understanding of polycrystalline GeSn's electrical properties. Furthermore, this work highlights the potential of ambipolar transport as a technique to employ towards the development of GeSn complementary metal-oxide-semiconductor field-effect transistors, promising to simplify and reduce the cost of GeSn manufacturing processes for edge computing and sensing applications.
42 ENGINEERING↗
Dinuclear Ligand-to-Ligand Charge Transfer Complexes
The synthesis and characterization of dinuclear ligand-to-ligand charge transfer complexes are described. Each complex is comprised of square-planar platinum(II) coordinated to a 3-tert-butyl-orthocatecholate donor and a 4,4’-di-tert-butyl-2,2’-bipyridine acceptor. Both complexes exhibit donor x acceptor ligand-to-ligand charge transfer (LL’CT) bands in the visible spectrum. The platinum complexes are covalently attached at the catecholate 5-position to either a meta- or para-phenylene bridge fragment. Both cyclic voltammetry and electronic absorption spectroscopy exhibit features characteristic of intramolecular interaction between the platinum centres. The LL’CT excited state lifetimes are ~twofold longer than the mononuclear parent complex. Here, the properties of these complexes are discussed and compared to similar complexes in the literature.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Hydrogen Adsorption on Ordered and Disordered Pt–Fe and Pt–Co Alloys
Not Available
36 MATERIALS SCIENCE↗
Intermetallic alloy structure–activity descriptors derived from inelastic X-ray scattering
Synchrotron spectroscopy and Density Functional Theory (DFT) are combined to develop a new descriptor for the stability of adsorbed chemical intermediates on metal alloy surfaces. This descriptor probes the separation of occupied and unoccupied d electron density in platinum and is related to shifts in Resonant Inelastic X-ray Scattering (RIXS) signals. Simulated and experimental spectroscopy are directly compared to show that the promoter metal identity controls the orbital shifts in platinum electronic structure. The associated RIXS features are correlated with the differences in the band centers of the occupied and unoccupied d bands, providing chemical intuition for the alloy ligand effect and providing a connection to traditional descriptions of chemisorption. The ready accessibility of this descriptor to both DFT calculations and experimental spectroscopy, and its connection to chemisorption, allow for deeper connections between theory and characterization in the discovery of new catalysts.
36 MATERIALS SCIENCE↗
Valence-to-core X-ray emission spectroscopy to resolve the size-dependent valence electronic structure of Pt nanoparticles
X-ray characterization of catalyst materials using synchrotron radiation has become more widely available to the scientific community in recent decades.
36 MATERIALS SCIENCE↗
Laser-engraved defects in TiO 2 support: Enhancing reducibility and redox capability of Pt/TiO 2 catalyst for reactive and selective hydrogenation
Titanium dioxide (TiO 2 ) has been studied as catalyst or catalyst support in catalysis. Its synthesis or modification approach controls the structural, optical, and electronic properties. Here, in this work, we applied laser engraving to the anatase TiO 2 and studied the consequent changes in its structure and property as well as the properties of TiO 2 supported platinum (i.e., Pt/TiO 2 ) catalyst. The laser engraving enlarged the particle size, formed rutile phase and created defects (i.e., oxygen vacancy (O v ) and Ti 3+ ) in anatase TiO 2 . This induced band gap change and enhanced visible light absorption. The defects created by laser engraving are stable and more reducible than those existed in the pristine TiO 2 . The defective TiO 2 is structurally stable and has great redox properties. The metal-support interaction in the Pt/defective TiO 2 catalyst is stronger than that of the pristine Pt/TiO 2 catalyst, which enabled higher reactivity and selectivity in hydrogenation of 3-nitrostyrene and furfuryl alcohol. Laser-engraved TiO 2 has been rarely studied for thermal catalysis. This work provides basic understanding of material properties and catalysis application of laser-engraved catalyst supports and catalysts in field of thermal catalysis.
25 ENERGY STORAGE↗
Electronic structure modulation of MoS2 by substitutional Se incorporation and interfacial MoO3 hybridization: Implications of Fermi engineering for electrocatalytic hydrogen evolution and oxygen evolution
The design of earth-abundant electrocatalysts that can facilitate water splitting at low overpotentials, provide high current densities, and enable prolonged operational lifetimes is central to the production of sustainable fuels. The distinctive atomistic and electronic structure characteristics of the edges of MoS2 imbue high reactivity toward the hydrogen evolution reaction. MoS2 is nevertheless characterized by significantly high overpotentials as compared to platinum. Here, we demonstrate that modulation of the electronic structure of MoS2 through interfacial hybridization with MoO3 and alloying of selenium on the anion sublattice allows for systematic lowering of the conduction band edge and raising of the valence band edge, respectively. The former promotes enhanced electrocatalytic activity toward hydrogen evolution, whereas the latter promotes enhanced activity toward the oxygen evolution reaction. Such alloyed heterostructures prepared by sol-gel reactions and hydrothermal selenization expose a high density of edge sites. The alloyed heterostructures exhibit low overpotential, high current density, high turnover frequency, and prolonged operational lifetime. The mechanistic origins of catalytic activity have been established based on electronic structure calculations and x-ray absorption and emission spectroscopy probes of electronic structure, which suggest that interfacial hybridization at the MoO3 interface yields low-lying conduction band states that facilitate hydrogen adsorption. In contrast, shallow Se 4p-derived states give rise to a raised effective valence band maximum, which facilitates adsorption of oxygen intermediates and engenders a low overpotential for the oxygen evolution reaction. The findings illustrate the use of electronic structure modulation through interfacial hybridization and alloying to systematically improve electrocatalytic activity.
Parija, Abhishek↗
Unveiling the electronic structure and chemical bonding of the deprotonated cisplatin anion [(NH 3 )(NH 2 )PtCl 2 ] − via low-temperature photoelectron spectroscopy and theoretical calculations
The dehydrogenated cisplatin anion, [(NH 3 )(NH 2 )PtCl 2 ] − , was investigated via low-temperature photoelectron spectroscopy and theoretical calculations. Seven and four spectral peaks are respectively resolved at 193 and 266 nm, yielding rich electronic structure information for both the anion and neutral. From the threshold and maximum of the lowest electron binding energy band, the experimental adiabatic (ADE) and vertical detachment energies (VDE) are determined to be 3.3 ± 0.1 and 3.525 ± 0.025 eV, respectively. Theoretical calculations indicate the dominant isomer adopting a cis-geometry, in which the platinum center is coplanar with two chlorine and two nitrogen ligands. The calculated VDE of 3.54 eV based on this structure agrees well with the experimental value. Charge analyses reveal that the excess electron in the anion is primarily localized on the Pt and Cl atoms. A suite of theoretical analysis tools was employed to elucidate the bonding characteristics and interaction strength between Pt and its ligands.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effect of single atom Platinum (Pt) doping and facet dependent on the electronic structure and light absorption of Lanthanum Titanium Oxide (La 2 Ti 2 O 7 ): A Density Functional Theory study
Charge generation and separation are two key processes for semiconductor photocatalysis. Here, we use Pt as a single atom catalyst to systematically examine the facet-dependent electronic band structure and light absorption of the layered perovskite-type wide-gap semiconductor, lanthanum titanium oxide (La 2 Ti 2 O 7 , LTO) by means of density functional theory simulations. In this study, it is found that single Pt atom doping of different LTO surfaces (here, (100), (101) and (001)) can not only create states in the bandgap that would promote the formation of recombination centers, but also shift the optical absorption edge to the visible region. Interestingly, the Pt doping forms a heterojunction, with the valence band maximum consisting of Pt states and the conduction band minimum consisting of LTO states, respectively. To study the facet dependent surface activity, acetic acid (CH 3 COOH) was used as a model molecule to investigate the adsorption and charge transfer on the (101), (100) and (001) Pt-LTO surface facets. The results show that the (101) facet could enable stronger adsorption of CH 3 COOH by promoting more electron transfer during the interfacial interaction. Our theoretical findings aim to promote the design and optimization of the single atom catalysts (SACs) for photocatalytic applications and other broad catalysis systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Low temperature water-gas shift: Optimization of K loading on Pt/m-ZrO 2 for enhancing CO conversion
Previous work showed that alkali doping of Pt/ZrO 2 significantly improved the LT-WGS rate. This improvement was caused by an acceleration in the rate of formate decomposition, the rate limiting step of an associative mechanism, through electronically weakening the CH bond. In this study, the effects that potassium loading on Pt/ZrO 2 have on the rate of LT-WGS and the strength of the CH bond in intermediate formate species are explored. Catalysts were investigated using in-situ DRIFTS, TPR-MS, TPD, EXAFS, and catalyst testing. Here, loadings of 1.7 wt.% potassium or higher shifted the formate ν(CH) band to significantly lower wavenumbers, indicating weakening of the bond. For the optimal loading, 2.6 wt.% K, the formate CH bond was significantly weakened, and the surface of Pt nanoparticles remained largely uncovered. However, loadings of 3.4 wt. % and above blocked the surface of the platinum nanoparticles. This, in addition to an increasing average Pt0 cluster size, hindered platinum from assisting in dehydrogenation of formate during steam promoted formate decomposition occurring in LT-WGS.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Dimensionality-Mediated Semimetal-Semiconductor Transition in Ultrathin PtTe 2 Films
Platinum ditelluride (PtTe2), a type-II Dirac semimetal, remains semimetallic in ultrathin films down to just two tri-atomic layers (TLs) with a negative gap of -0.36 eV. Further reduction of the film thickness to a single TL induces a Lifshitz electronic transition to a semiconductor with a large positive gap of +0.79 eV. This transition is evidenced by experimental band structure mapping of films prepared by layer-resolved molecular beam epitaxy, and by comparing the data to first-principles calculations using a hybrid functional. The results demonstrate a novel electronic transition at the two-dimensional limit through film thickness control.
36 MATERIALS SCIENCE↗
Superconducting platinum silicide analyzed by x-ray photoelectron spectroscopy
Platinum silicide has garnered increased attention due to its potential applications as a superconductor within silicon technology. In this work, we characterize a superconducting PtSi film using x-ray photoelectron spectroscopy with an Al K α excitation source. Survey spectra, Pt 5s, Pt 4f, Pt 4d, Pt 4p, Pt 4s, Si 2p, Si 2s, O 1s core levels, and the valence band spectrum were measured. In conclusion, this collection of high-quality core level spectra of a superconducting PtSi film provide reference data for this material, which often has a minimal native silicon oxide layer and overlapping Si and Pt core level peaks.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Application-driven synthesis and characterization of hexagonal boron nitride deposited on metals and carbon nanotubes
Hexagonal boron nitride (h-BN) is unique among two-dimensional materials, with a large band gap (~6 eV) and high in-plane thermal conductivity (>400 W m -1 K -1 ), second only to diamond among electrical insulators. Many studies to date have relied on exfoliated h-BN, however, for large-scale applications the material must be synthesized by methods such as chemical vapor deposition (CVD). Here, we first investigate single-layer h-BN synthesized by CVD on single crystal platinum (Pt), comparing these films with h-BN deposited on more commonly used polycrystalline Pt and Cu. The h-BN film grown on single crystal Pt has the lowest surface roughness and best spatial homogeneity, and our electrochemical transfer process allows the Pt to be reused with no measurable degradation. Additionally, we also demonstrate direct capping of carbon nanotubes (CNTs) with as-grown h-BN, but we find that the direct growth partly degrades the CNT electrical conductivity. On the other hand, we show that transferred monolayer h-BN can serve as an ultrathin barrier which protects MoS2 from damage at high temperatures and discuss other applications that take advantage of the conformal h-BN deposition.
2D materials↗
Dual-Emitting Cyclometalated Platinum Compounds with Isocyanide Ligands
Cyclometalated platinum(II) compounds with both C^N chelating iminic ligands and isocyanide ligands were synthesized. Two sets of compounds from the reaction of two separate HC^N ligands (derived from thiophene or benzene) with [Pt2Me4(μ-SMe 2 ) 2 ] were obtained, resulting in square planar compounds with an anionic C^N ligand, a methyl ligand, and a dimethyl sulfide (dms) ligand completing the coordination sphere. Subsequently, the dms ligand was easily substituted by several isocyanide ligands (2-naphthyl, adamantyl, 2,6-dimethylphenyl, ptoluenesulfonylmethyl). The compounds were characterized by multinuclear NMR spectroscopy, IR spectroscopy, and singlecrystal X-ray diffraction (SCXRD). Their photophysical properties were explored using UV/vis, emission, and transient absorption (TA) spectroscopy. The emission spectra for the thiophene-derived compounds showed well-defined dual emission peaks, while the benzene-derived compounds’ bands appeared less resolved. DFT and TDDFT calculations were performed, and results were compared to the observed spectroscopic properties of the newly synthesized complexes.
Inorganic carbon compounds↗
The [M 6 (S 2 C 2 Ph 2 ) 6 ] (M = Ni, Pd, Pt) Series: Multielectron Reservoirs That Sustain Ligand-Based Oxidations and Metal-Based Reductions
A complete [M 6 (S 2 C 2 R 2 ) 6 ] series (M = Ni (1), Pd (2), Pt (3); R = Ph), the rarest variety among homoleptic dithiolene transition-metal compounds, has been prepared by reaction between [M(S 2 C 2 Ph 2 ) 2 ] and a M 0 source. The platinum member of this set is the first of its type. Diffraction-quality crystals, grown with high reproducibility by evaporation from PhNO 2 solutions, reveal fully reduced [Ph 2 C 2 S 2 ] 2– dianions and an octahedral M 6 core that is reduced to C 2 symmetry by the fusion of a mononuclear D 2h [M(S 2 C 2 Ph 2 ) 2 ] fragment upon a C 4 -symmetric base. The [Ni 6 (S 2 C 2 Ph 2 ) 2 ] 1– monoanion, prepared by Cp* 2 Co reduction, shows only modest structural differences from its neutral counterpart. In CH 2 Cl 2 , 1 and 2 can undergo two reductions and an oxidation, while 3 sustains two reductions and two oxidations. In benzonitrile, 1 sustains three reversible oxidations at potentials that are shifted appreciably to less positive values. The cathodic processes are shown by density functional theory (DFT) calculations to involve an MO largely of metal–sulfur composition that has contributions throughout the C 4 -symmetric pentametallic base of the assembly, while the oxidations are largely ligand-based and confined to the monometallic [M(S 2 C 2 Ph 2 ) 2 ] cap. The absorption spectra are marked by multiple overlapping bands that produce a continuous, tapering absorption profile of unresolved shoulders and swells.
Ligands↗
Platinum group metal-free (PGM-free) integrated tandem junction photoelectrochemical (PEC) water splitting devices (Final Technical Report)
This project involves using solar light, a photoabsorber, and a catalyst to split water and produce hydrogen. The Department of Energy (DOE) targets for integrated photoelectrochemical (PEC) cells emphasize cost (electrode cost < $200/m 2 ), performance (> 15% solar to hydrogen (STH) efficiency), and stability (> 6 months electrode lifetime), but most approaches skew toward one specific metric. This project exploited interfacial integration of platinum group metal-free (PGM-free) catalysts on the high performance and high value tandem solar cells to attain or exceed the DOE benchmark STH energy conversion efficiency and durability. This was investigated in two thrusts by developing two PEC devices for direct comparison: the first is a high-performance monolithic device based on state-of-the-art GaInP 2 /GaAs tandem solar cells developed at National Renewable Energy Laboratory (NREL), and the second is a high-value device based on earth-abundant wide band gap photoabsorber materials including oxynitride and hybrid organic-inorganic perovskite (HOIP) coupled with commercial narrow band gap silicon (Si). Both these devices were paired with electrocatalysts developed for this purpose at Rutgers University by adapting them to thin films on the photoabsorbers. These catalysts are based on the hydrogen evolution reaction (HER) catalysts (Ni 5 P 4 ), oxygen evolution reaction (OER) catalysts (LiCo 2 O 4 ) previously developed at Rutgers for high-efficiency electrolyzers. For using the high-performance tandem solar cell and Ni 5 P 4 catalysts, we achieved a durability of > 200 h at a STH efficiency of > 10%. For using the high-value wide band gap single junction solar cells on n + Si, we achieved 0.73 mA/cm 2 at 1.23V vs reversible hydrogen electrode (RHE) and -15.9 mA/cm 2 at 0V vs RHE using the oxynitride- and HOIP-based photoelectrodes, respectively. After comparing their photocurrent densities, we down selected the HOIP photoabsorber to couple Si for fabrication of a tandem photocathode. However, due to the COVID-19 pandemic, both the laboratories at Rutgers and NREL were locked down for three months and reopened only partially in 2020. The HOIP/Si tandem photocathode using robust nickel phosphide thin film catalysts cannot be developed within the project period, which is expected to achieve a STH efficiency of > 20%. Also, the low-cost LiCo 2 O 4 OER catalysts need to replace the benchmark IrO 2 for evaluation. Finally, techonomic analysis of full high-performance and high-value integrated PEC devices needs to be carried out for comparison in terms of cost.
08 HYDROGEN↗
Isotope effect in formaldehyde steam reforming on Pt/m-ZrO 2 : Insight into chemical promotion by alkalis
Infrared spectroscopy, temperature programmed reaction mass spectrometry (TP-reaction/MS), and catalyst testing were used to investigate alkali promotion of dehydrogenation selectivity during formaldehyde steam reforming (FSR) on Pt/m-ZrO 2 . In a preferred pathway, formaldehyde reacts with water forming hydrogen and formate, followed by forward formate decomposition to CO 2 and H 2 . Alkali-doping of 2 wt% Pt/m-ZrO 2 increases catalyst basicity, which weakens the formate C-H bond promoting formate dehydrogenation / decarboxylation. Promotion by alkali in FSR was observed through a formate nu(CH) band shift to lower wavenumbers in infrared spectroscopy, and through a decrease in the normal isotope effect in switching from H-to D-labeled formalde-hyde in TP-reaction/MS.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗