Search NASA⌕ Search

SEARCH · Search NASA

Results for “Production rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Modeling of asteroidal dust production rates

The production rate of dust associated with the prominent Hirayama asteroid families and the background asteroidal population are modeled with the intent of using the families as a calibrator of mainbelt dust production. However, the dust production rates of asteroid families may be highly stochastic; there is probably more than an order of magnitude variation in the total area of dust associated with a family. Over 4.5 x 10(exp 9) years of collisional evolution, the volume (mass) of a family is ground down by an order of magnitude, suggesting a similar loss from the entire mainbelt population. Our collisional models show that the number of meteoroids deliverable to Earth also varies stochastically, but only by a factor of 2 to 3.

Durda, Daniel D.↗
NASA NTRS1979

The terrestrial cratering record. II - The crater production rate

The terrestrial crater production rate is estimated from a compilation of the locations and ages of proven and probable terrestrial impact craters and compared with that calculated from astronomical observations and for other planets. The estimated size-frequency distribution of craters greater than 20 km in diameter formed during the Phanerozoic, a -2 power law, is similar to the distributions of lunar and Martian craters. The North American and East European cratons are estimated to have cratering rates of craters greater than 20 km of 0.36 x 10 to the -14/sq km yr and 0.33 x 10 to the -14/sq km yr, respectively, in good agreement with previous estimates and observations of Apollo bodies. Comparisons with the lunar rate indicate that the lunar and terrestrial rates overlap if the cratering flux had been constant over the last 3.4 billion years, however if a constant rate was not reached until 3.0 to 2.5 billion years ago, the lunar rate would have been half that of the terrestrial rate.

Grieve, R. A. F.↗
NASA NTRS2016

Titan-Like Exoplanets: Variations in Geometric Albedo and Effective Transit Height with Haze Production Rate

Extensive studies characterizing Titan present an opportunity to study the atmospheric properties of Titan-like exoplanets. Using an existing model of Titan's atmospheric haze, we computed geometric albedo spectra and effective transit height spectra for six values of the haze production rate (zero haze to twice present) over a wide range of wavelengths (0.2-2 microns). In the geometric albedo spectra, the slope in the UV-visible changes from blue to red when varying the haze production rate values from zero to twice the current Titan value. This spectral feature is the most effective way to characterize the haze production rates. Methane absorption bands in the visible-NIR compete with the absorbing haze, being more prominent for smaller haze production rates. The effective transit heights probe a region of the atmosphere where the haze and gas are optically thin and that is thus not effectively probed by the geometric albedo. The effective transit height decreases smoothly with increasing wavelength, from 376 km to 123 km at 0.2 and 2 microns, respectively. When decreasing the haze production rate, the methane absorption bands become more prominent, and the effective transit height decreases with a steeper slope with increasing wavelength. The slope of the geometric albedo in the UV-visible increases smoothly with increasing haze production rate, while the slope of the effective transit height spectra is not sensitive to the haze production rate other than showing a sharp rise when the haze production rate increases from zero. We conclude that geometric albedo spectra provide the most sensitive indicator of the haze production rate and the background Rayleigh gas. Our results suggest that important and complementary information can be obtained from the geometric albedo and motivates improvements in the technology for direct imaging of nearby exoplanets.

Geometric albedo↗
NASA NTRS1986

Oxygen production rates for P/Halley over much of the 1985-1986 apparition

Long slit CCD spectrophotometry of comet P/Halley in the visible region was used to measure the production rate of atomic oxygen during the 1985/86 apparition. The observations cover a large range of heliocentric distances, since the technique is applicable to apparently bright and faint comets. The cometary gas production rate for P/Halley increases rapidly with decreasing heliocentric distance toward perihelion and is systematicaly larger at a given heliocentric distance for the postperihelion observations. The average production rate for O1D on the day of the Giotto flyby is 4 times 10 to the 28th power atoms/sec giving an extrapolated total water production rate of 6 times 10 to the 29th power mols/sec. A method for comparing the absolute cometary gas production rates for different comets is discussed.

Spinrad, Hyron↗
NASA NTRS1990

The production rate and spatial distribution of H2O for Comet P/Halley

Spectroscopic observations of the O I 1D lines for Comet P/Halley are used to derive water-production rates; 43 exposures during the period August 1985 to June 1986 are reduced. The reduction procedure involves sky subtraction, ratios with solar analog comparison stars, subtraction of contaminating NH2 emissions, and absolute flux calibration. The flux collected within the 2.5-arcsec-wide x 151-arcsec-long integration aperture is converted to a total comet O I 6300-A luminosity using a cometary gas outflow model. Water-production rates for 10 preperihelion dates and seven postperihelion dates are derived. An error budget yields an estimated uncertainty of + 30 percent in H2O production rates with a maximum error of + or - 50 percent. For the preperihelion period, a good fit of the water-production rate as a function of heliocentric distance can be obtained as Q(H2O) = 4.36 x 10 to the 29th x r exp -2.54. A postperihelion enhancement by about a factor of 1.8, which appears to dissipate by June 1986, is observed. Several values of enhanced water production agree well with the observed light curve of P/Halley. Comparison of H2O production rates with those deduced by other methods shows quite reasonable agreement.

Fink, Uwe↗
DOE OSTI2026

A low-latitude, high-elevation 10Be production-rate calibration from the Rwenzori Mountains, Uganda

Cosmogenic nuclide surface-exposure dating has become a key tool in geomorphology. Robust application of the technique relies on determination of local nuclide production rates using independently dated calibration sites. However, there are few existing calibration sites in certain regions, particularly in low-latitude, high-elevation regions where cosmogenic nuclide production is theoretically more sensitive to changes in Earth's magnetic field and atmospheric conditions. We present a new cosmogenic beryllium-10 (10Be) production-rate calibration from the equatorial Rwenzori Mountains in Uganda. The calibration is based on radiocarbon dating of basal lake sediments (∼21.3 kyr BP) from Lake Mahoma (2900 m asl) and measured 10Be concentrations from boulders on the crest of a moraine which dams the lake. Our results indicate a time-integrated 10Be production rate of 15.83 ± 0.81 at/g/yr at Lake Mahoma. We then use these calibration data and two public online calculators to calculate ages for moraines in a separate Rwenzori valley for which there exists a minimum-limiting radiocarbon age constraint (∼12 kyr BP) on surficial glacial sediments. This enables us to assess the performance of different parameters used to scale production rates spatially and temporally (e.g., scaling frameworks, geomagnetic field reconstructions, atmospheric models) for surface-exposure age calculation in the region. Our results highlight the sensitivity of low-latitude cosmogenic nuclide surface-exposure ages to discrete calculation parameters, such as scaling framework or reconstructions of Earth's magnetic field, and the utility of determining production rates at sites where limiting age data exists for other nearby landforms.

Anderson, N [Dartmouth College]↗
NASA NTRS1985

The global joule heat production rate and the AE index

The degree of accuracy with which the AE index may be used as a measure of the joule heat production rate is evaluated for a typical substorm event on March 18, 1978, by estimating the global joule heat production rate as a function of time on the basis of data obtained from the IMS's six meridian chains. It is found that, although the AE index is statistically linearly related to the global joule heat production rate, caution is required when one assumes that details of AE index time variations during individual events are representative of those of the joule heat production rate.

Wei, S.↗
DOE OSTI2025

Measurement of the $\textrm{t}\overline{\textrm{t}}\textrm{H}$ and tH production rates in the H → $\textrm{b}\overline{\textrm{b}}$ decay channel using proton-proton collision data at $\sqrt{s}$ = 13 TeV

An analysis of the production of a Higgs boson (H) in association with a top quark-antiquark pair ($\textrm{t}\overline{\textrm{t}}\textrm{H}$) or a single top quark (tH) is presented. The Higgs boson decay into a bottom quark-antiquark pair (H → $\textrm{b}\overline{\textrm{b}}$) is targeted, and three different final states of the top quark decays are considered, defined by the number of leptons (electrons or muons) in the event. The analysis utilises proton-proton collision data collected at the CERN LHC with the CMS experiment at $\sqrt{s}$ = 13 TeV in 2016–2018, which correspond to an integrated luminosity of 138 fb −1 . The observed $\sqrt{s}$ production rate relative to the standard model expectation is 0.33 ± 0.26 = 0.33 ± 0.17(stat) ± 0.21(syst). Additionally, the $\textrm{t}\overline{\textrm{t}}\textrm{H}$ production rate is determined in intervals of Higgs boson transverse momentum. An upper limit at 95% confidence level is set on the tH production rate of 14.6 times the standard model prediction, with an expectation of ${19.3}_{-6.0}^{+9.2}$. Finally, constraints are derived on the strength and structure of the coupling between the Higgs boson and the top quark from simultaneous extraction of the $\textrm{t}\overline{\textrm{t}}\textrm{H}$ and tH production rates, and the results are combined with those obtained in other Higgs boson decay channels.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1986

Neutron capture production rates of cosmogenic 60Co, 59Ni and 36Cl in stony meteorites

Results for neutron flux calculations in stony meteoroids (of various radii and compositions) and production rates for Cl-36, Ni-59, and Co-60 are reported. The Ni-59/Co-60 ratio is nearly constant with depth in most meteorites: this effect is consistent with the neutron flux and capture cross section properties. The shape of the neutron flux energy spectrum, varies little with depth in a meteorite. The size of the parent meteorite can be determined from one of its fragments, using the Ni-59/Co-60 ratios, if the parent meteorite was less than 75 g/cm(2) in radius. If the parent meteorite was larger, a lower limit on the size of the parent meteorite can be determined from a fragment. In C3 chondrites this is not possible. In stony meteorites with R less than 50 g/cm(2) the calculated Co-60 production rates (mass less than 4 kg), are below 1 atom/min g-Co. The highest Co-60 production rates occur in stony meteorites with radius about 250 g/cm(2) (1.4 m across). In meteorites with radii greater than 400 g/cm(2), the maximum Co-60 production rate occurs at a depth of about 175 g/cm(2) in L-chondrite, 125 g/cm(2) in C3 chrondrite, and 190 g/cm(2) in aubrites.

Spergel, M. S.↗
DOE OSTI2021

Measurement of the Higgs boson production rate in association with top quarks in final states with electrons, muons, and hadronically decaying tau leptons at $\sqrt{s} =$ 13 TeV

The rate for Higgs (${\mathrm{H}} $) bosons production in association with either one (${\mathrm{t}} {\mathrm{H}} $) or two (${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $) top quarks is measured in final states containing multiple electrons, muons, or tau leptons decaying to hadrons and a neutrino, using proton–proton collisions recorded at a center-of-mass energy of $13\,\text {Te}\text {V} $ by the CMS experiment. The analyzed data correspond to an integrated luminosity of 137$\,\text {fb}^{-1}$. The analysis is aimed at events that contain ${\mathrm{H}} \rightarrow {\mathrm{W}} {\mathrm{W}} $, ${\mathrm{H}} \rightarrow {\tau } {\tau } $, or ${\mathrm{H}} \rightarrow {\mathrm{Z}} {\mathrm{Z}} $ decays and each of the top quark(s) decays either to lepton+jets or all-jet channels. Sensitivity to signal is maximized by including ten signatures in the analysis, depending on the lepton multiplicity. The separation among ${\mathrm{t}} {\mathrm{H}} $, ${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $, and the backgrounds is enhanced through machine-learning techniques and matrix-element methods. The measured production rates for the ${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $ and ${\mathrm{t}} {\mathrm{H}} $ signals correspond to $0.92 \pm 0.19\,\text {(stat)} ^{+0.17}_{-0.13}\,\text {(syst)} $ and $5.7 \pm 2.7\,\text {(stat)} \pm 3.0\,\text {(syst)} $ of their respective standard model (SM) expectations. The corresponding observed (expected) significance amounts to 4.7 (5.2) standard deviations for ${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $, and to 1.4 (0.3) for ${\mathrm{t}} {\mathrm{H}} $ production. Assuming that the Higgs boson coupling to the tau lepton is equal in strength to its expectation in the SM, the coupling $y_{{\mathrm{t}}}$ of the Higgs boson to the top quark divided by its SM expectation, $\kappa _{{\mathrm{t}}}=y_{{\mathrm{t}}}/y_{{\mathrm{t}}}^{\mathrm {SM}}$, is constrained to be within $-0.9< \kappa _{{\mathrm{t}}}< -0.7$ or $0.7< \kappa _{{\mathrm{t}}}< 1.1$, at 95% confidence level. This result is the most sensitive measurement of the ${\mathrm{t}} {{\overline{{{\mathrm{t}}}}}} {\mathrm{H}} $ production rate to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2004

Revised Production Rates for Na-22 and Mn-54 in Meteorites Using Cross Sections Measured for Neutron-induced Reactions

The interactions of galactic cosmic rays (GCR) with extraterrestrial bodies produce small amounts of radionuclides and stable isotopes. The production rates of many relatively short-lived radionuclides, including 2.6-year Na-22 and 312-day Mn-54, have been measured in several meteorites collected very soon after they fell. Theoretical models used to calculate production rates for comparison with the measured values rely on input data containing good cross section measurements for all relevant reactions. Most GCR particles are protons, but secondary neutrons make most cosmogenic nuclides. Calculated production rates using only cross sections for proton-induced reactions do not agree well with measurements. One possible explanation is that the contribution to the production rate from reactions initiated by secondary neutrons produced in primary GCR interactions should be included explicitly. This, however, is difficult to do because so few of the relevant cross sections for neutron-induced reactions have been measured.

Sisterson, J. M.↗
NASA NTRS2004

Production Rates for Noble-Gas Isotopes in Eucrites

To get cosmic-ray exposure ages of meteorites from measured concentrations of cosmic-ray-produced ("cosmogenic") noble-gas isotopes, production rates for those isotopes are needed. The best production rates take into consideration the composition of the meteorite and the "shielding" of the sample (the pre-atmospheric size and shape of the meteoroid and the sample s location in the meteoroid). For ordinary chondrites, there have been many sets of measurements to establish production systematics. The Ne-22/Ne-21 is often used to help to get shielding-dependent production rates. We report here numerical simulations for the production of isotopes of the light noble gases He, Ne, and Ar in both basaltic and cumulate eucrites for several sizes.

Reedy, R. C.↗
NASA NTRS1979

Upper limits on production rate of NO per ion pair

The maximum production rate of NO per ion pair during a solar proton event has been calculated using an approach described by Porter et al. (1976). For altitudes between 80 and 120 km the calculation yields a limit of 2.68 NO per ion pair for 10 keV electrons, a value which is consistent with the rates implied by the measurements of Arnold (1978) as quoted by Fabian et al. (1979). For altitudes below 80 km the maximum rate of NO production is calculated to be 1.46 to 1.53 NO per ion pair.

Jackman, C. H.↗
NASA NTRS1994

The trend of production rates with heliocentric distance for comet P/Halley

Comet P/Halley was observed spectroscopically in the wavelength range 5200-10,400 A during 10 observing runs, roughly a month apart from 1985 August 28 to 1986 June 6. The observations span a heliocentric distance from 0.73 to 2.52 AU. This data set is analyzed to determine the course of the production rate with heliocentric distance for C2, NH2, CN, and the continuum. The effect of changing the Haser scale lengths and their heliocentric distance dependence is examined. The production rate ratios to water change only in a minor way, but the absolute values of the production rates are more severely affected. Fluorescent efficiencies, or g-factors for the CN red system are calculated, and band intensity ratios for NH2 and CN are presented. Using presently available fluorescence efficiencies and Haser scale lengths, mixing ratios for the parents of C2, CN, and NH2 with respect to water are: 0.34 +/- 0.07%, 0.15 +/- 0.04%, and 0.13 +/- 0.05%. It is found that these mixing ratios are essentially constant over the heliocentric distance range of the observations, implying a rather uniform nucleus and uniform outgassing characteristics, although there are indications of smaller scale day-to-day variations. The results provide strong observational confirmation that water evaporation controls the activity of the comet over the distance range studied. Continuum values Af rho are determined, and their ratios to QH2O are found to have a clear dependence with heliocentric distance approximately r(exp -1.0) with a post-perihelion enhancement. No correlation of the production rate ratios with light curve of P/Halley were found, nor was there any correlation of the C2 or CN production with the dust.

Fink, Uwe↗
NASA NTRS2004

Production Rates of Cosmogenic Nuclides in the Knyahinya L-Chondrite

The production rates of spallogenic radionuclides and stable isotopes in the L-chondrite Knyahinya were investigated using the MCNPX code. Numerous cosmogenic nuclides had been measured in many Knyahinya samples. The pre-atmospheric size and sample locations of Knyahinya are well known, thus Knyahinya is a good test case for cosmogenic-nuclide production-rate calculations. Our calculated profiles were compared to the measurements to determine effective proton fluxes.

Kim, K. J.↗
NASA NTRS1977

Relative crater production rates on planets

The relative numbers of impacts on different planets, estimated from the dynamical histories of planetesimals in specified orbits (Wetherill, 1975), are converted by a described procedure to crater production rates. Conversions are dependent on impact velocity and surface gravity. Crater retention ages can then be derived from the ratio of the crater density to the crater production rate. The data indicate that the terrestrial planets have crater production rates within a factor ten of each other. As an example, for the case of Mars, least-squares fits to crater-count data suggest an average age of 0.3 to 3 billion years for two types of channels. The age of Olympus Mons is discussed, and the effect of Tharsis volcanism on channel formation is considered.

Hartmann, W. K.↗
DOE OSTI2023

Photon production rate from Transverse-Longitudinal ( T – L) mesonic correlator on the lattice

Thermal photons from the QGP provide important information about the interaction among plasma constituents. The photon production rate from a thermally equilibrated system is proportional to the transverse spectral function ρ T (ω = |k → |,k → ). One can also calculate the photon production rate from the difference between ρ T (ω, k → ) (transverse) and ρ L (ω, k → ) (longitudinal) projections, as ρL vanishes on the photon point. Because the UV part of ρ T – ρ L is suppressed, the corresponding Euclidean correlator receives most of its contribution from the IR part. We calculate the T – L correlator on N f = 2 + 1 flavour HISQ configurations with m l = m s /5 at temperature of about 1.15T ρc (220 MeV). We have used two ansätze for the spectral function: 1) A polynomial connected to the UV region consistent with OPE expansion and 2) a hydro-inspired spectral function. We have also applied the Backus-Gilbert method to estimate the spectral function. All these different approaches are combined to estimate the photon production rate.

Bala, Dibyendu↗
NASA NTRS1978

Hydrogen and hydroxyl production rates of Comet Tago-Sato-Kosaka /1969 IX/

Comet Tago-Sato-Kosaka (1969 IX) was observed with the ultraviolet photometers on OAO 2 from January 16.41 to January 29.89, 1970, while its heliocentric distance increased from 0.78 to 1.03 AU. The production rates of hydrogen and hydroxyl are derived from Lyman-alpha (1216 A) and OH (0-0) band (3090 A) emission. The variations of the hydrogen and hydroxyl production ran parallel to one another, while their ratio was about 3:1. These results are consistent with the assumption that vaporization of water ice controlled the production rate of gas during this interval. The hydrogen production rates of four nonperiodic comets are compared.

Keller, H. U.↗