Search NASA⌕ Search

SEARCH · Search NASA

Results for “Promethium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Probing the subtle differences between promethium and curium

Curium and promethium share similar chemical and physical properties thereby complicating their separation. Co-located processing at Oak Ridge National Laboratory results in curium contamination of the fission product stream containing promethium. To gain insight into the difficulty of this separation, the fundamental properties of these elements are experimentally and computationally probed in a 2,2’:6’,2”-terpyridine crystal system. Analysis of the isostructural compounds via single crystal X-ray diffraction and quantum theory of atoms in molecules reveals that bonding between promethium and curium is quite similar in this particular structure type. The small differences in the analysis of these two elements in this isostructural series sheds light on the difficulty required to separate the elements from each other. More so, this study develops the fundamental chemistries of two rare elements in the solid state and experimentally portrays the often-omitted position of promethium within the lanthanide series.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of a promethium complex in solution

Lanthanide rare-earth metals are ubiquitous in modern technologies, but we know little about chemistry of the 61st element, promethium (Pm), a lanthanide that is highly radioactive and inaccessible. Despite its importance, Pm has been conspicuously absent from the experimental studies of lanthanides, impeding our full comprehension of the so-called lanthanide contraction phenomenon: a fundamental aspect of the periodic table that is quoted in general chemistry textbooks. Here we demonstrate a stable chelation of the 147 Pm radionuclide (half-life of 2.62 years) in aqueous solution by the newly synthesized organic diglycolamide ligand. The resulting homoleptic Pm III complex is studied using synchrotron X-ray absorption spectroscopy and quantum chemical calculations to establish the coordination structure and a bond distance of promethium. These fundamental insights allow a complete structural investigation of a full set of isostructural lanthanide complexes, ultimately capturing the lanthanide contraction in solution solely on the basis of experimental observations. Our results show accelerated shortening of bonds at the beginning of the lanthanide series, which can be correlated to the separation trends shown by diglycolamides. The characterization of the radioactive Pm III complex in an aqueous environment deepens our understanding of intra-lanthanide behaviour and the chemistry and separation of the f-block elements.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Feasibility Study of Spectrophotometry to Support a Promethium Production Program at ORNL

Optical spectroscopy can be used to optimize analytical measurements for lanthanide elements and provide real-time feedback to help guide production operations. This study evaluates spectrophotometry for the determination of samarium (Sm 3+ ) and neodymium (Nd 3+ ) in aqueous and organic solutions at concentrations relevant to a promethium (Pm) program separation scheme. Detection limits approached 0.5 mM for Nd 3+ and 2 mM for Sm 3+ using Ocean Insight spectrophotometers. Additionally, Sm 3+ detection limits using laser fluorescence spectra for Sm 3+ approached single ppm (mg∙L -1 ) levels. An absorption spectrum containing Nd and Pm is also reported and discussed. This work demonstrates proofof-principle concepts for applying spectrophotometry to online monitoring applications in support of a future Pm production program.

47 OTHER INSTRUMENTATION↗

Structural Analysis of Curium, Promethium, and Early Lanthanides Using 2,2′:6′,2″-Terpyridine in the Presence of Acid

Trivalent lanthanides and actinides are difficult to separate, often relying on subtle differences in bonding between the 4f– and 5f–orbitals. However, trivalent Cm poses additional complexity owing to its half-filled 5f 7 shell. This configuration causes Cm to have very similar properties to several of the early lanthanides, more specifically, similarly sized Pm. In this study, similarities were probed through isolating an isostructural series between the early lanthanides (La–Eu) and Cm with the oligoamine 2,2′:6′2″-terpyridine in the presence of acid. Single-crystal X-ray diffraction studies highlighted the similarities of Pm and Cm under these conditions and further demonstrated the difficulty in separating these elements. Despite the similarities, differences exist between interactions of Pm and Cm with terpyridine in the solid state. Interestingly, Cm appears to be more similar to Sm than to Pm. Furthermore, this study continues to probe the fundamental chemistry of Pm and Cm with respect to slight differences that can be leveraged in their separation from each other.

Vogt, Trenton B. [Michigan State Univ., East Lansi↗

Elemental technetium and promethium as cosmic-ray clocks

The possibility of using elemental Tc (Z = 43) and Pm (Z = 61) as clocks to measure the mean cosmic-ray confinement time in the Galaxy, tau(epsilon) is considered. For this purpose it is necessary to estimate the unknown beta(+) decay half-lives of several Tc and Pm isotopes; these estimates are obtained using beta-decay systematics. In the case of Tc it is possible to estimate the half-lives sufficiently well and show that this element can indeed be used as a cosmic-ray clock; in the case of Pm the half-lives are too uncertain to permit any conclusion. In order to make meaningful measurement of tau(epsilon) using elemental Tc, a comsic-ray detector must have a charge resolution less than about 0.25e in the region around Tc, and enough collecting power to detect a few hundred Tc nuclei.

Drach, J.↗

Comprehensive Synthesis and Structural Trends in Tetramethyl Diglycolamide (TMDGA) Nitrate Complexes with Lanthanides and Americium

Complexes of N,N,N',N'-tetramethyl diglycolamide (TMDGA), a hydrophilic diglycolamide (DGA) proposed as an aqueous phase holdback reagent, have been crystallized for the majority of the lanthanide series (excluding promethium), yttrium, and americium to deepen our structural understanding of trivalent metal ion (M 3+ ) DGA coordination compounds in the presence of nitrate counter-anions. The presented collection of 16 complexes with accompanying single-crystal structures, taking formulas [M(TMDGA) 3 ][M(NO 3 ) 6 ] (M = La, Ce, Pr, Nd, Sm, Am), [M(TMDGA) 3 ][M(NO 3 ) 5 (H 2 O)] 1–x [M(NO 3 ) 4 (H 2 O) 2 ] x (NO 3 ) 1+x (M = Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb), [M(TMDGA) 3 ] 2 [M(NO 3 ) 4 (H 2 O) 2 ] 0.75 [M(NO 3 ) 5 (H 2 O)] 1.25 (NO 3 ) 2.75 ·H 2 O (M = Lu), and [M(TMDGA) 3 ][M(NO 3 ) 5 (H 2 O)](NO 3 )·CH 3 OH (M = Y) were all synthesized via solvent diffusion of reaction mixtures containing the metal nitrate M(NO 3 ) 3 ·nH 2 O and TMDGA. Single-crystal X-ray diffraction analyses of these new structures show that each TMDGA complex comprises of three TMDGA ligands coordinating the metal ion via carbonyl and etheric oxygen atoms forming [M(TMDGA) 3 ] 3+ cations. Spectroscopy measurements under high pressure displayed notable differences in the f → f transition shifting between that of Nd(III) and Am(III). Shifting of transitions by 2.0 nm were observed in Nd up to 8.50 ± 0.09 GPa, while Am saw shifting between 11.0 to 13.5 nm at pressures up to 20.06 ± 1.90 GPa. The local geometry in these complexes is a distorted spherical capped square antiprism (CSAPR-9) except for of the yttrium complex, which exhibits a distorted spherical tricapped trigonal prismatic (TCTPR-9) geometry. Further, the anions that form concomitantly with the TMDGA complexes are composed of hexanitrato species for the early lanthanide ions (lanthanum to samarium); whereas the remaining smaller lanthanides did not possess sufficiently large ionic radii to coordinate six bidentate nitrate anions, instead, one or two nitrate anions are situated in the outer sphere. The systematic progression of changes in the anionic environments of these complexes outlines the changing coordination habits afforded by the lanthanide contraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of an Isostructural Series of 12-Coordinate Lanthanide Nitrate Hybrid Double Perovskites with Cubic Symmetry

In efforts to study the periodic chemical properties of the rare earth elements and their structural chemistry, a hybrid double perovskite phase A 2 B'BX 6 with the formula ((CH 3 ) 4 N) 2 KLn(NO 3 ) 6 (Ln = La–Lu, Y ex. Pm) was synthesized that crystallizes in the cubic space group, $Fm$$\bar{3}$$m$. This series was obtained via evaporative crystallization from a mixture of Ln(NO 3 ) 3 , KNO 3 , and (CH 3 ) 4 N·NO 3 in a 1:1:2 ratio from either H 2 O or 4.0 M HNO 3 . In this double perovskite structure, the B site containing the lanthanide ion is coordinated by six bidentate nitrate ligands, with the distal N$=$O oxygen atoms coordinating the potassium on the B' site in an octahedral six-coordinate environment. The two-remaining charge-compensating (CH 3 ) 4 N + cations occupy the interstitial voids in the lattice on the A site. This periodic series was characterized via single-crystal X-ray diffraction, powder X-ray diffraction, IR, and Raman spectroscopy. Emission spectra of the Eu complex indicate a phase transition to trigonal symmetry upon cooling. In conclusion, this series is unique as it represents a rare isostructural series spanning the entirety of the rare earth elements excluding promethium with homoleptic 12-coordinate rare earth metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comprehensive approach for elucidating the interplay between 4f n +1 and 4f n 5d 1 configurations in Ln 2+ complexes

Lanthanides (Ln) are typically found in the +3 oxidation state. However, in recent decades, their chemistry has been expanded to include the less stable +2 oxidation state across the entire series except promethium (Pm), facilitated by the coordination of ligands such as trimethylsilylcyclopentadienyl, C 5 H 4 SiMe 3 (Cp'). The [LnCp' 3 ] complexes have been the workhorse for the synthesis and theoretical study of the fundamental aspects of divalent lanthanide chemistry, where experimental and computational evidence have suggested the existence of different ground state (GS) configurations, 4f n+1 or 4f n 5d 1 , depending on the specific metal. Standard reduction potentials and 4f n+1 to 4f n 5d 1 promotion energies have been two factors usually considered to rationalize the occurrence of these variable GS configurations, however the driving force behind this phenomenon is still not clear. In this work we present a comprehensive theoretical approach to shed light on this matter using the [LnCp 3 ] - model systems. We begin by calculating 4f n+1 to 4f n 5d 1 promotion energies and successfully correlate them with existing experimental data. Furthermore, we analyze how changes in the GS charge distribution between the Ln ions, LnCp 3 and the reduced [LnCp 3 ] - complexes (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) correlate with experimental trends in redox potentials and the calculated promotion energies. For this purpose, a comprehensive theoretical work that includes relativistic ligand field density functional theory (LFDFT) and relativistic ab initio wavefunction methods was performed. This study will help the rational design of suitable environments to tune the different GS configurations as well as modulating the spectroscopic properties of new Ln 2+ complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lanthanide-dependent alcohol dehydrogenases require an essential aspartate residue for metal coordination and enzymatic function

The lanthanide elements (Ln 3+ ), those with atomic numbers 57–63 (excluding promethium, Pm 3+ ), form a cofactor complex with pyrroloquinoline quinone (PQQ) in bacterial XoxF methanol dehydrogenases (MDHs) and ExaF ethanol dehydrogenases (EDHs), expanding the range of biological elements and opening novel areas of metabolism and ecology. Other MDHs, known as MxaFIs, are related in sequence and structure to these proteins, yet they instead possess a Ca 2+ -PQQ cofactor. An important missing piece of the Ln 3+ puzzle is defining what features distinguish enzymes that use Ln 3+ -PQQ cofactors from those that do not. In this work, using XoxF1 MDH from the model methylotrophic bacterium Methylorubrum extorquens AM1, we investigated the functional importance of a proposed lanthanide-coordinating aspartate residue. We report two crystal structures of XoxF1, one with and another without PQQ, both with La 3+ bound in the active-site region and coordinated by Asp 320 . Using constructs to produce either recombinant XoxF1 or its D320A variant, we show that Asp 320 is needed for in vivo catalytic function, in vitro activity, and La 3+ coordination. XoxF1 and XoxF1 D320A, when produced in the absence of La 3+ , coordinated Ca 2+ but exhibited little or no catalytic activity. We also generated the parallel substitution in ExaF to produce ExaF D319S and found that this variant loses the capacity for efficient ethanol oxidation with La 3+ . These results provide evidence that a Ln 3+ -coordinating aspartate is essential for the enzymatic functions of XoxF MDHs and ExaF EDHs, supporting the notion that sequences of these enzymes, and the genes that encode them, are markers for Ln 3+ metabolism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced EXAFS analysis techniques applied to the L -edges of the lanthanide oxides

The unique properties of the lanthanide (Ln) elements make them critical components of modern technologies, such as lasers, anti-corrosive films and catalysts. Thus, there is significant interest in establishing structure–property relationships for Ln-containing materials to advance these technologies. Extended X-ray absorption fine structure (EXAFS) is an excellent technique for this task considering its ability to determine the average local structure around the Ln atoms for both crystalline and amorphous materials. However, the limited availability of EXAFS reference spectra of the Ln oxides and challenges in the EXAFS analysis have hindered the application of this technique to these elements. The challenges include the limited k-range available for the analysis due to the superposition of L-edges on the EXAFS, multielectron excitations (MEEs) creating erroneous peaks in the EXAFS and the presence of inequivalent absorption sites. Herein, we removed MEEs to model the local atomic environment more accurately for light Ln oxides. Further, we investigated the use of cubic and non-cubic lattice expansion to minimize the fitting parameters needed and connect the fitting parameters to physically meaningful crystal parameters. The cubic expansion reduced the number of fitting parameters but resulted in a statistically worse fit. The non-cubic expansion resulted in a similar quality fit and showed non-isotropic expansion in the crystal lattice of Nd 2 O 3 . In total, the EXAFS spectra and the fits for the entire set of Ln oxides (excluding promethium) are included. The knowledge developed here can assist in the structural determination of a wide variety of Ln compounds and can further studies on their structure–property relationships.

36 MATERIALS SCIENCE↗

Silicon Carbide Radioisotope Batteries

The substantial radiation resistance and large bandgap of SiC semiconductor materials makes them an attractive candidate for application in a high efficiency, long life radioisotope battery. To evaluate their potential in this application, simulated batteries were constructed using SiC diodes and the alpha particle emitter Americium Am-241 or the beta particle emitter Promethium Pm-147. The Am-241 based battery showed high initial power output and an initial conversion efficiency of approximately 16%, but the power output decayed 52% in 500 hours due to radiation damage. In contrast the Pm-147 based battery showed a similar power output level and an initial conversion efficiency of approximately 0.6%, but no degradation was observed in 500 hours. However, the Pm-147 battery required approximately 1000 times the particle fluence as the Am-242 battery to achieve a similar power output. The advantages and disadvantages of each type of battery and suggestions for future improvements will be discussed.

Rybicki, George C.↗

Extraction of Pm-147 from savannah river site nuclear material management programs

The Savannah River Site (SRS) processes used-nuclear fuel to recover uranium. There are many interesting fission products lost in the raffinate from this separation including 147 Pm. Here, the goal of this work was to recover 147 Pm from SRS waste solutions. A radiochemical separation method typically used for the determination of 147 Pm and 151 Sm was modified to purify significant quantities of 147 Pm from the H Canyon waste solutions. The developed scheme was tested on a small aliquot of waste solution from the processing of used fuel from the High Flux Isotope Reactor at Oak Ridge National Laboratory.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Demonstration of a Three-Dimensionally Structured Betavoltaic

In this work, we present a demonstration of a high-aspect ratio, three-dimensionally structured betavoltaic device. High-aspect ratio silicon PIN diodes were used as the semiconductor absorber and 147 PmCl 3 was used as the beta emitter. Three devices were fabricated with 147 Pm activities of 2.4 mCi, 7.4 mCi, and 29.5 mCi. The device with the highest activity produced an initial power output of 200 nW and was monitored over a period of 8 months to observe the current–voltage behavior over time, during which time the output current decreased in accordance with the radioactive half-life of 147 Pm. Small deviations in the output current of a few percent during the long-term measurement were found to be attributable to the humidity in the room where the experiment was done. Furthermore, the output current generated from the devices was 68–77% of the theoretical maximum, indicating significant infiltration of the radioisotope into the ridged structures.

42 ENGINEERING↗

Combination of DGA and LN Columns: A Versatile Option for Isotope Production and Purification at Oak Ridge National Laboratory

The chromatographic resins DGA and LN have been used sequentially to separate curium, californium, plutonium, and various fission products (FPs) to obtain products with a pure radioisotope or a radioelement with high isotopic purity. This 2-step combination of resins has found applications in the 252 Cf and 238 Pu campaigns performed at Oak Ridge National Laboratory. Experiments have been carried out in glove boxes, shielded caves, and hot cells, demonstrating that these resins are adequate and maintain their performance in highly radiolytic environments. We find that using these resins has led to the recovery of curium highly enriched (>95%) in 248 Cm, the clean separation of 251 Cf for the superheavy element research, and the recovery of 147 Pm from the FP stream obtained during the 238 Pu production campaign while demonstrating that the raffinate post DGA is essentially free of transuranic elements.

07 ISOTOPE AND RADIATION SOURCES↗