Search NASA⌕ Search

SEARCH · Search NASA

Results for “QE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

VUV Testing of Science Cameras at MSFC: QE Measurement of the CLASP Flight Cameras

The NASA Marshall Space Flight Center (MSFC) has developed a science camera suitable for sub-orbital missions for observations in the UV, EUV and soft X-ray. Six cameras were built and tested for the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP), a joint National Astronomical Observatory of Japan (NAOJ) and MSFC sounding rocket mission. The CLASP camera design includes a frame-transfer e2v CCD57-10 512x512 detector, dual channel analog readout electronics and an internally mounted cold block. At the flight operating temperature of -20 C, the CLASP cameras achieved the low-noise performance requirements (less than or equal to 25 e- read noise and greater than or equal to 10 e-/sec/pix dark current), in addition to maintaining a stable gain of approximately equal to 2.0 e-/DN. The e2v CCD57-10 detectors were coated with Lumogen-E to improve quantum efficiency (QE) at the Lyman- wavelength. A vacuum ultra-violet (VUV) monochromator and a NIST calibrated photodiode were employed to measure the QE of each camera. Four flight-like cameras were tested in a high-vacuum chamber, which was configured to operate several tests intended to verify the QE, gain, read noise, dark current and residual non-linearity of the CCD. We present and discuss the QE measurements performed on the CLASP cameras. We also discuss the high-vacuum system outfitted for testing of UV and EUV science cameras at MSFC.

Champey, Patrick↗
NASA NTRS2015

VUV Testing of Science Cameras at MSFC: QE Measurement of the CLASP Flight Cameras

The NASA Marshall Space Flight Center (MSFC) has developed a science camera suitable for sub-orbital missions for observations in the UV, EUV and soft X-ray. Six cameras were built and tested for the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP), a joint National Astronomical Observatory of Japan (NAOJ) and MSFC sounding rocket mission. The CLASP camera design includes a frame-transfer e2v CCD57-10 512x512 detector, dual channel analog readout electronics and an internally mounted cold block. At the flight operating temperature of -20 C, the CLASP cameras achieved the low-noise performance requirements (less than or equal to 25 e- read noise and greater than or equal to 10 e-/sec/pix dark current), in addition to maintaining a stable gain of approximately equal to 2.0 e-/DN. The e2v CCD57-10 detectors were coated with Lumogen-E to improve quantum efficiency (QE) at the Lyman- wavelength. A vacuum ultra-violet (VUV) monochromator and a NIST calibrated photodiode were employed to measure the QE of each camera. Four flight-like cameras were tested in a high-vacuum chamber, which was configured to operate several tests intended to verify the QE, gain, read noise, dark current and residual non-linearity of the CCD. We present and discuss the QE measurements performed on the CLASP cameras. We also discuss the high-vacuum system outfitted for testing of UV and EUV science cameras at MSFC.

Camera↗
DOE OSTI2026

Measurement of the QE Map

113 MHz SRF gun utilized CsK 2 Sb and Na 2 KSb cathodes, which were irradiated with a pulsed green laser with a wavelength of 0.53 microns. The drive laser generated 78 kHz pulses with an acousto-optic modulator selecting the desired number of pulses reaching the cathode. The operator can select the aperture size, defining the laser spot diameter on the cathode, and the power level, which is controlled by a rotating polarizer. The laser power reaching the cathode can be measured with a meter based on a photodiode. The quantum efficiency (QE) of a photocathode serves as a primary indicator of its state. Small QE renders the cathode unusable when the desired bunch charge cannot be achieved. Strong variations in the quantum efficiency on the cathode surface might lead to the growth of the beam emittance due to the space charge effects. We have created a routine to measure the distribution of the QE on the cathode. The operator selects the aperture size, the central spot location, and the scan ranges for both planes. The scan starts from the central spots and proceeds along a spiral-like trajectory, making N rounds. The number of rounds can be chosen, and the total number of measured points is (2N+1) 2 . The laser spot movement is shown in Fig. 1.

43 PARTICLE ACCELERATORS↗
NASA NTRS1992

The impact of dynamic data assimilation on the numerical simulations of the QE II cyclone and an analysis of the jet streak influencing the precyclogenetic environment

A mesoscale numerical model is combined with a dynamic data assimilation via Newtonian relaxation, or 'nudging', to provide initial conditions for subsequent simulations of the QE II cyclone. Both the nudging technique and the inclusion of supplementary data are shown to have a large positive impact on the simulation of the QE II cyclone during the initial phase of rapid cyclone development. Within the initial development period (from 1200 to 1800 UTC 9 September 1978), the dynamic assimilation of operational and bogus data yields a coherent two-layer divergence pattern that is not well defined in the model run using only the operational data and static initialization. Diagnostic analysis based on the simulations show that the initial development of the QE II storm between 0000 UTC 9 September and 0000 UTC 10 September was embedded within an indirect circulation of an intense 300-hPa jet streak, was related to baroclinic processes extending throughout a deep portion of the troposphere, and was associated with a classic two-layer mass-divergence profile expected for an extratropical cyclone.

Manobianco, John↗
NASA NTRS1986

The possible influence of upstream upper-level baroclinic processes on the development of the QE II storm

An analysis of the QE II storm of September 9-11, 1978 presents evidence for the existence of upper-level baroclinic processes upstream of the rapidly developing cyclone. The analysis shows that a deepening shortwave trough was located 400 to 500 km upstream of the site of the storm 12 h prior to rapid cyclogenesis. The trough was associated with: (1) a polar jet marked by 65 m/s winds in its core and significant vertical and horizontal wind shear, (2) positive vorticity advection and divergence at the 300 mb level, and (3) an intense frontal zone that extended from 300 mb down to the surface. It also appears that a tropopause fold likely extruded stratospheric air down to the 700-800 mb level, 400-500 km upstream of the surface low and 12 h prior to the explosive development phase of the cyclone. These findings raise questions about Gyakum's (1983) assertion that the QE II storm developed in an area in which the baroclinic support was confined to the lower troposphere and the related assertion by Anthes et al. (1983) that upper-level forcing upstream of the area of rapid cyclogenesis was weak and apparently not important in this case.

Uccellini, L. W.↗
NASA NTRS1993

Analysis of the impact of Seasat scatterometer data and horizontal resolution on GLA model simulations of the QE II storm

The impact of the Seasat-A satellite scatterometer wind data and the increased horizontal resolution on the Goddard Laboratory for Atmospheres model predictions of the Queen Elizabeth II (QE II) storm of 9-11 September 1978 was evaluated for four different GLA model simulations of the QE II storm. It is shown that the largest impact on the simulation was caused by doubling the model's horizontal resolution from 4 deg x 5 deg to 2 deg x 2.5 deg. The increased resolution resulted in a storm track which was much closer to the one observed, with a much deeper surface development, a stronger mass circulation, stronger heating, and stronger increase of angular momentum.

Lenzen, Allen J.↗
NASA NTRS2006

Delta-Doped High Purity Silicon UV-NIR CCDs with High QE and Low Dark Current

Delta doping process was developed on p-channel CCDs for MIDEX-Orion and JDEM/SNAP and was applied to large format (2k x4k) CCDs. Delta doping is applied to fully-fabricated CCDs (complete with Al metallization). High QE and low dark current is demonstrated with delta doped p-channel CCDs. In-house AR coating is demonstrated. Advantages include: Delta doping enables high QE and stability across the entire spectral range attainable with silicon. Delta doping is a low temperature process and is compatible with fully-fabricated detector arrays. Same base device for Orion two channels. High radiation tolerance and no thinning requirements of high purity p-channel. CCDs are additional advantages.

Orion↗
NASA NTRS2010

Characterization and Absolute QE Measurements of Delta-Doped N-Channel and P-Channel CCDs

In this paper we present the methodology for making absolute quantum efficiency (QE) measurements from the vacuum ultraviolet (VUV) through the near infrared (NIR) on delta-doped silicon CCDs. Delta-doped detectors provide an excellent platform to validate measurements through the VUV due to their enhanced UV response. The requirements for measuring QE through the VUV are more strenuous than measurements in the near UV and necessitate, among other things, the use of a vacuum monochromator, and good camera vacuum to prevent chip condensation, and more stringent handling requirements. The system used for these measurements was originally designed for deep UV characterization of CCDs for the WF/PC instrument on Hubble and later for Cassini CCDs.

Jacquot, Blake C.↗
DOE OSTI2026

CP26 is not involved in qE- or qZ-type non-photochemical quenching in Arabidopsis

CP26 is a monomeric minor light-harvesting complex of Photosystem II (LHCII) protein located at the interface between LHCII trimers and the PSII core in thylakoid membranes. Previous studies have proposed that CP26 plays a role in non-photochemical quenching (NPQ) in addition to light harvesting. Here, we utilized biophysical and pharmacological approaches to investigate this role using single- and higher-order Arabidopsis (Arabidopsis thaliana) cp26 mutants, examining its relationship to known NPQ regulators (Photosystem II subunit S, PsbS, violaxanthin de-epoxidase, and the pH gradient across the thylakoid membrane). cp26 mutants showed significantly reduced maximum PSII quantum efficiencies (F v /F m ) in darkness, indicating a constitutively quenched state, further confirmed by fluorescence lifetime measurements. Destabilized PSII-LHCII supercomplexes observed in native gel electrophoresis and tighter PSII supercomplex packing were potential causes, with no other antenna proteins capable of rescuing this phenotype. In addition, the cp26 mutants exhibited altered NPQ capacity—modest in single mutants but substantial in double mutants—independent of PsbS and violaxanthin de-epoxidase. Together, these results show that CP26 is not involved in qE or qZ but may primarily play an indirect role in apparent NPQ responses via PSII-LHCII supercomplex organization.

Walter, Julia [University of Cambridge (United Kin↗
DOE OSTI2020

Development of High-QE GaN Photodectors for Liquid Noble Particle Detectors

Detection of the handful of photons generated when a dark matter particle interacts in a liquid Xenon detector requires a new type of photodetector with very high detection efficiency at ultraviolet wavelengths, very low radioactive backgrounds, and essentially no measureable readout noise (achieved with devices with high intrisic gain). Such devices would find wide applicability to not only high energy physics experiments, but to a number of commercial applications including, e.g., biomedical imaging of fluorescent tags. We developed photodetectors based on amorphous GaN thin film structures (photocathodes) grown by molecular beam epitaxy on quartz windows. We also developed approaches to integrate these photocathode device structures with vacuum electron multipliers. All materials and fabrication techniques were developed to minimize radioactive backgrounds in materials, so these detectors could be used for very low count rate experiments, such as the future liquid-Xenon dark matter detectors, and future liquid-Argon neutrino detectors. We demonstrated growth of very high quantum efficiency amorphous GaN cathodes grown on a number of different substrates (Stainless steel, p-Silicon) reaching detection efficiencies of 80% at 220nm. The key to this growth was to use nitrogen plasma-assistend MBEs and very low growth temperatures. We also discovered that thinner structures (e.g.,40nm a-GaN thin films) had the best performance. We successfully demonstrated techniques for the vacuum transfer of these photocathode structures to a novel chamber that used hydraulics and bellow to form a cold indium bond needed to integrate these cathodes into sealed-tube devices. A complete, stand-along, device could not be completed during this proposal period due to difficulties in growing structures on the thick quartz window. Subsequent work is aimed at addressing this difficulty, by growing a buffer layer on the quartz substrate.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2025

Enhancing the Design of Photocathodes with 90% polarization and QE > 1% for DOE NP (Final Report)

This project’s 3 major goals were the following: 1. Fabricate state-of-the-art spin-polarized photocathodes using MOCVD and develop knowledge of fabrication parameters. 2. Enhance the design of 2 structures of spin-polarized photocathodes (strained-superlattice and strained-superlattice with distributed Bragg reflector) to assess paths to the next generation of spin-polarized photocathodes. 3. Provide a supply of state-of-the-art spin-polarized photocathodes to both Brookhaven National Laboratory and the Thomas Jefferson National Accelerator Facility.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Search for numu Disappearance in the Short-Baseline Neutrino Program Utilizing an Exclusive 1mu1p QE-Like Final State

The Short-Baseline Neutrino (SBN) program at Fermilab is searching for neutrino oscillations over a short baseline as a signature of a sterile neutrino with a mass splitting of about 1eV2. Such oscillations would drive the disappearance of muon neutrinos in the Booster Neutrino Beam between the detectors of the SBN Program. We present progress on an analysis to search for muon neutrino disappearance between the SBND and ICARUS detectors (the SBN Program's near and far detectors, respectively). This analysis leverages the one muon, one proton, quasi-elastic-like final state, which provides the best resolution for reconstructing the neutrino energy. The analysis incorporates a comprehensive set of systematic uncertainties in the neutrino flux, interaction, and detector model. This analysis will soon be completed as part of the first oscillation results at SBN.

Rowe, Nathaniel [U. Chicago (main)]↗
DOE OSTI2020

Comparison of optical potential for nucleons and $\varDelta $ resonances

Precise modeling of neutrino interactions on nuclear targets is essential for neutrino oscillations experiments. The modeling of the energy of final state particles in quasielastic (QE) scattering and resonance production on bound nucleons requires knowledge of both the removal energy of the initial state bound nucleon as well as the average Coulomb and nuclear optical potentials for final state leptons and hadrons. We extract the average values of the real part of the nuclear optical potential for final state nucleons ( $U_{opt}^{QE}$ U opt QE ) as a function of the nucleon kinetic energy from inclusive electron scattering data on nuclear targets ( $_\mathbf{6 }^\mathbf{12 }{} \mathbf{C} $ 6 12 C + $_\mathbf{8 }^\mathbf{16 }{} \mathbf{O} $ 8 16 O , $_\mathbf{20 }^\mathbf{40 }{} \mathbf{Ca} $ 20 40 Ca + $_\mathbf{18 }^\mathbf{40 }{} \mathbf{Ar} $ 18 40 Ar , $_\mathbf{3 }^\mathbf{6 }{} \mathbf{Li} $ 3 6 Li , $_\mathbf{18 }^\mathbf{27 }{} \mathbf{Al} $ 18 27 Al , $_\mathbf{26 }^\mathbf{56 }{} \mathbf{Fe} $ 26 56 Fe , $_\mathbf{82 }^\mathbf{208 }{} \mathbf{Pb} $ 82 208 Pb ) in the QE region and compare to calculations. We also extract values of the average of the real part of the nuclear optical potential for a $\varDelta (1232)$ Δ ( 1232 ) resonance in the final state ( $U^\varDelta _{opt}$ U opt Δ ) within the impulse approximation. We find that $U^\varDelta _{opt}$ U opt Δ is more negative than $U_{opt}^{QE}$ U opt QE with $U^\varDelta _{opt}\approx $ U opt Δ ≈ 1.5 $U_{opt}^{QE}$ U opt QE for $_\mathbf{6 }^\mathbf{12 }{} \mathbf{C} $ 6 12 C .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1990

A technique for determining Urbach edge, midgap states and electric field in a-Si:H and a-(Si,Ge):H devices

A technique for measuring the Urbach energy of valence band tail states and midgap defect densities in a-Si:H and a-(Si,Ge):H devices is described. The Urbach energy is determined by measuring the quantum efficiency (QE) of delocalized holes in the devices, whereas the midgap state density (DOS) is estimated by measuring the QE of localized holes. The distinction between delocalized and localized holes is obtained from the behavior of the QE upon the application of reverse bias to the device. The QE of holes localized in midgap states increases significantly upon the application of reverse bias because of Frenkel-Poole tunneling, whereas the QE of holes in tail states does not show such an increase. It is shown that upon light soaking the Urbach edge does not change, but the midgap DOS does increase significantly. A primary consequence of the increase in DOS is a decrease in electric field in the low-field middle i region of the p-i-n cell. The decrease in electric field is experimentally estimated by fitting the increase in the reverse bias QE to Frenkel-Poole tunneling.

Dalal, Vikram L.↗