Search NASA⌕ Search

SEARCH · Search NASA

Results for “RF dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

First-order beam dynamics and RF parameters for the PSR short-bunch ("pulse-stacking") mode

Here we mainly discuss the longitudinal ring beam dynamics and RF control for the bunching needed to maintain the short (a few nanoseconds) proton pulses required by the Weapons Neutron Research Center (WNR) for measurement of neutron cross sections and reaction dynamics, as specified in the recent upgrade proposal known as “Pulse Stacking.” Single micropulses, each containing 6x10 8 protons, are to be delivered to the Proton Storage Ring (PSR) from the LANSCE linac and successively overlaid in from 1 to 4 RF buckets per ring turn until a maximum number of particles in the bucket is achieved. This is distinct from the currently used long-pulse mode in which the bucket equals the ring circumference and a 201-MHz micropulse stream is injected at each turn to fill ¾ of the bucket to obtain pulses ~270 ns long.

Accelerator Design, Technology, and Operations↗

Nb$^{3}$Sn Technology for Low-beta linacs

Nb3Sn is the most advanced potential successor for niobium in superconducting RF accelerator cavities. Nb3Sn has a significantly higher critical temperature (18.3 K) compared to that of niobium (9.2 K). This has a large effect on the BCS surface resistance, and therefore, on the dynamic RF losses at 4.5 K. The higher critical temperature allows two important changes for cavity and cryomodule design. First, the lower BCS losses allow the designer to use a higher frequency, translating to physically smaller cavities and cryomodules. Second, the low dynamic losses allow the use of stand-alone cryocoolers instead of complex helium refrigerators and distribution systems. Fabrication of a prototype 218 MHz cavity, test results, and continuing challenges are discussed.

43 PARTICLE ACCELERATORS↗

CW copper injector for SRF industrial cryomodules

Compact SRF industrial linacs can provide unique parameters of the beam (>1 MW and >1-10 MeV) hardly achievable by normal conducting linacs within limited space. SRF technology was prohibitively expensive until the development of conduction cooling which opened the way for compact stand alone SRF systems suitable for industrial and research applications. Limited cooling capacity puts strict requirements on the beam parameters with zero losses of the beam on the SRF cavity walls. This implies strict requirements on the beam energy to be accepted by the cryomodule and most importantly the beam bunching with zero particles in between. We designed a CW normal conducting RF injector which consists of a gridded RF gun integrated with a first cell of a copper booster cavity to satisfy these requirements. Here we present a complete design of a booster cavity including beam dynamics, RF, thermomechanical and engineering design.

43 PARTICLE ACCELERATORS↗

Linear accelerator accelerating module to suppress back-acceleration of field-emitted particles

A method for the suppression of upstream-directed field emission in RF accelerators. The method is not restricted to a certain number of cavity cells, but requires similar operating field levels in all cavities to efficiently annihilate the once accumulated energy. Such a field balance is desirable to minimize dynamic RF losses, but not necessarily achievable in reality depending on individual cavity performance, such as early Q.sub.0-drop or quench field. The method enables a significant energy reduction for upstream-directed electrons within a relatively short distance. As a result of the suppression of upstream-directed field emission, electrons will impact surfaces at rather low energies leading to reduction of dark current and less issues with heating and damage of accelerator components as well as radiation levels including neutron generation and thus radio-activation.

43 PARTICLE ACCELERATORS↗

Phase-resolved optical emission of dusty rf discharges: Experiment and simulation

The spectral emission of atoms in a dusty radio frequence (rf) discharge plasma in argon and helium has been measured with a gated ICCD camera. The spatially and temporally resolved emission/excitation of the argon and helium atoms during the rf cycle in the dusty discharge was compared to the dust-free case. In the bulk plasma above the dust cloud, the emission is clearly enhanced in the dusty discharge with respect to the pure discharge, whereas in the sheath the emission is reduced. In addition, the emission of a dusty argon plasma is studied via particle-particle particle-mesh (P{sup 3}M) simulations. The rf dynamics with a single dust particle trapped in the sheath was calculated. Like in the experiment the dust modifies the atomic emission. The spatiotemporal excitation pattern of the experiment is reproduced and a detailed understanding of the difference in excitation of the discharge with and without dust is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RF system models for the CERN Large Hadron Collider with application to longitudinal dynamics

The LHC RF station-beam interaction strongly influences the longitudinal beam dynamics, both single bunch and collective effects. Non-linearities and noise generated within the Radio Frequency (RF) accelerating system interact with the beam and contribute to beam motion and longitudinal emittance blowup. Thus, the noise power spectrum of the RF accelerating voltage strongly affects the longitudinal beam distribution. Furthermore, the coupled-bunch instabilities are also directly affected by the RF components and the configuration of the Low Level RF (LLRF) feedback loops. In this work we present a formalism relating the longitudinal beam dynamics with the RF system configurations, an estimation of collective effects stability margins, and an evaluation of longitudinal sensitivity to various LLRF parameters and configurations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamics of Flat Bunches with Second Harmonic RF

We investigate the dynamics of longitudinally flat bunches created with a second harmonic cavity in a high energy collider. We study Landau damping in a second harmonic cavity with analytical and numerical methods. The latter include particle tracking and evolution of the phase space density. The results are interpreted in the context of possible application to the LHC. A possible path to a luminosity upgrade at the LHC is through the creation of longitudinally flat bunches. They can increase the luminosity roughly by 40% when the beam intensities are at the beam-beam limit. Lower momentum spread which can reduce backgrounds and make collimation easier as well lower peak fields which can mitigate electron cloud effects are other advantages. Use of a second harmonic rf system is a frequently studied method to create such flat bunches. Here we consider some aspects of longitudinal dynamics of these bunches in the LHC at top energy. First we consider intensity limits set by the loss of Landau damping against rigid dipole oscillations. Next we describe numerical simulations using both particle tracking and evolution of the phase space density. These simulations address the consequences of driving a bunch at a frequency that corresponds to the maximum of the synchrotron frequency.

43 PARTICLE ACCELERATORS↗

Interaction between pulsed discharge and radio frequency discharge burst at atmospheric pressure

The atmospheric pressure glow discharges (APGD) with dual excitations in terms of pulsed voltage and pulse-modulation radio frequency (rf) power are studied experimentally between two parallel plates electrodes. Pulse-modulation applied in rf APGD temporally separates the discharge into repetitive discharge bursts, between which the high voltage pulses are introduced to ignite sub-microsecond pulsed discharge. The discharge characteristics and spatio-temporal evolution are investigated by means of current voltage characteristics and time resolved imaging, which suggests that the introduced pulsed discharge assists the ignition of rf discharge burst and reduces the maintain voltage of rf discharge burst. Furtherly, the time instant of pulsed discharge between rf discharge bursts is manipulated to study the ignition dynamics of rf discharge burst.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗