Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Correlation of Rock Spectra with Quantitative Morphologic Indices: Evidence for a Single Rock Type at the Mars Pathfinder Landing Site

The Mars Pathfinder (MPF) landing site was predicted to contain a broad sampling of rock types varying in mineralogical, physical, mechanical and geochemical characteristics. Although rocks have been divided into several spectral categories based on Imager for Mars Pathfinder (IMP) visible/near-infrared data, efforts in isolating and classifying spectral units among MPF rocks and soils have met with varying degrees of success, as many factors influencing spectral signatures cannot be quantified to a sufficient level to be removed. It has not been fully determined which spectral categories stem from intrinsic mineralogical differences between rocks or rock surfaces, and which result from factors such as physical or chemical weathering. This has made isolation of unique rock mineralogies difficult. Morphology, like composition, is a characteristic tied to the intrinsic properties and geologic and weathering history of rocks. Rock morphologies can be assessed quantitatively and compared with spectral data, to identify and classify rock types at the MPF landing site. They can also isolate actual rock spectra from spectral types that are surficial in origin, as compositions associated with mantling dust or chemical coatings would presumably not influence rock morphology during weathering events. We previously reported on an initial classification of rocks using the quantitative morphologic indices of size, roundness, sphericity and elongation. Here, we compare this database of rock characteristics with associated rock surface spectra to improve our ability to discriminate between spectra associated with rock types and those from other sources.

Yingst, R. A.↗
NASA NTRS2001

Thermal Inertia of Rocks and Rock Populations and Implications for Landing Hazards on Mars

Rocks represent an obvious potential hazard to a landing spacecraft. They also represent an impediment to rover travel and objects of prime scientific interest. Although Mars Orbiter Camera (MOC) images are of high enough resolution to distinguish the largest rocks (an extremely small population several meters diameter or larger), traditionally the abundance and distribution of rocks on Mars have been inferred from thermal inertia and radar measurements, our meager ground truth sampling of landing sites, and terrestrial rock populations. In this abstract, we explore the effective thermal inertia of rocks and rock populations, interpret the results in terms of abundances and populations of potentially hazardous rocks, and conclude with interpretations of rock hazards on the Martian surface and in extremely high thermal inertia areas.

Golombek, M. P.↗
NASA NTRS1972

Chemical composition of sawdust from lunar rock 12013 and comparison of a Java tektite with the rock.

Abundances of 11 major and minor elements and 11 trace elements have been determined by instrumental neutron activation analysis of two Apollo 12013 rock fragments, a sample of rock 12013,17 sawdust, and a Java tektite (J2). Although the abundances of major elements in tektite J2 are similar to those of rock 12013, comparison of the minor and trace elements shows that no fragment of sawdust or rock 12013 that has been analyzed to date is chemically similar to tektite glass. Rock sawdust is representative of ?whole rock' composition only if the amount of contamination from the sawing process is known. After appropriate correction for saw wire contamination, analyses of sawdust yield fairly accurate averaged elemental compositions of complex clastic lunar and other rocks.

Showalter, D. L.↗
NASA NTRS2018

Dating Igneous Rocks Using the Potassium–Argon Laser Experiment (KArLE) Instrument: A Case Study for ~380 Ma Basaltic Rocks

We report new K–Ar isochron data for two ~380 Ma basaltic rocks, using an updated version of the Potassium–Argon Laser Experiment (KArLE), which is being developed for future in situ dating of planetary materials. These basalts have K contents comparable with those of lunar KREEP basalts or igneous lithologies found by Mars rovers, whereas previous proof‐of‐concept studies focused primarily on more K‐rich rocks. We aim to measure these analogous samples to show the advancing capability of in situ K–Ar geochronology. Combining laser‐induced breakdown spectroscopy (LIBS), mass spectrometry (MS), and microscopic analyses, we measured the abundance of K and 40Ar from 23 spots on the basalt samples. We then constructed K–Ar isochron plots from these rocks. The breadboard instrument consists of flight‐equivalent devices including a 30‐mJ Nd:YAG laser and a quadrupole mass spectrometer. Despite much lower K abundances than in previous studies, the isochron slopes yielded 380 ± 44 Ma and 398 ± 50 Ma for 380.7‐Ma and 373.5‐Ma rocks, respectively, indicating that accuracy better than 25 Ma (<7%) is achievable with our instrument. The isochron intercepts both yielded trapped 40Ar approximately 1 × 10−6 cm3 STP/g. Our experimental results demonstrate that accurate and precise measurements are possible using the KArLE approach on basaltic rocks, which are ubiquitous on planetary surfaces, and are useful in addressing a wide range of questions in planetary science.

Yuichiro Cho↗
NASA NTRS1980

A physical basis for remote rock mapping of igneous rocks using spectral variations in thermal infrared emittance

Results of a theoretical investigation of the relation between spectral features in the 8-12 micrometer region and rock type are presented. Data on compositions of a suite of rocks and measurements of their spectral intensities in 8.2-10.9 and 9.4-12.1 micrometer bands published by Vincent (1973) were subjected to various quantitative procedures. There was no consistent direct relationship between rock group names and the relative spectral intensities. However, there is such a relationship between the Thornton-Tuttle (1960) Differentiation Index and the relative spectral intensities. This relationship is explicable on the basis of the change in average Si-O bond length which is a function of the degree of polymerization of the SiO4 tetrahedra of the silicate minerals in the igneous rocks.

Walter, L. S.↗
NASA NTRS2001

Thermal Inertia of Rocks and Rock Populations

The effective thermal inertia of rock populations on Mars and Earth is derived from a model of effective inertia versus rock diameter. Results allow a parameterization of the effective rock inertia versus rock abundance and bulk and fine component inertia. Additional information is contained in the original extended abstract.

Golombek, M. P.↗
NASA NTRS2002

Experiments and Spectral Studies of Martian Volcanic Rocks: Implications for the Origin of Pathfinder Rocks and Soils

The composition and spectral properties of the Mars Pathfinder rocks and soils together with the identification of basaltic and andesitic Mars terrains based on Thermal Emission Spectrometer (TES) data raised interesting questions regarding the nature and origin of Mars surface rocks. We have investigated the following questions: (1) are the Pathfinder rocks igneous and is it possible these rocks could have formed by known igneous processes, such as equilibrium or fractional crystallization, operating within SNC magmas known to exist on Mars? If it is possible, what P (depth) and PH2O conditions are required? (2) whether TES-based interpretations of plagioclase-rich basalt and andesitic terrains in the south and north regions of Mars respectively are unique. Are the surface compositions of these regions plagioclase-rich, possibly indicating the presence of old AI-rich crust of Mars, or are the spectra being affected by something like surface weathering processes that might determine the spectral pyroxene to plagioclase ratio?

Rutherford, Malcolm J.↗
NASA NTRS1988

Chemistry and petrology of the Apennine Front, Apollo 15. I - KREEP basalts and plutonic rocks. II - Impact melt rocks

The mineralogy, petrology, and chemistry of rock fragments for the Apennine Front coarse fines (10-4 and 4-2 mm) have been determined. The data are consistent with a single eruptive event that produced several flows. It is found that most of the plutonic rocks are ferroan in nature, with a few belonging to the Mg-suite. The mineral and bulk chemistry of KREEP basalts and the composition of ferroan anorthosites are discussed. Petrographic studies of 21 impact melts are also presented, showing a variety of textures. It is found that the Apollo 15 impact melts are mixtures of low-K Fra Mauro, KREEP, and plutonic components. The Ni/Ir ratios of the melt rocks are shown to be greater than chondritic values, indicating ancient and/or iron meteorite components.

Simon, S. B.↗
NASA NTRS2020

Hot Rocks! Near-Infrared Reflectances (and Emissivities) or Rocks at Venus Surface Temperatures

Venus’ surface can be viewed in emission through a few near-infrared (NIR) spectral ‘windows’ (1 µm) in its relatively opaque atmosphere [1]. Venus’ surface shows NIR emissivities that correlate with surface geology [2-4], and these emissivity variations are interpreted as differences in surface rock type (mafic vs. silicic) and/or extent of weathering (Fe2+ silicates vs. Fe3+-oxide-coated). To understand and quantify the observed variations in NIR emissivity, high-temperature (T) emissivity can be measured directly [5,6]. For example, emissivities of basalts in the wavelength range 0.85 – 1.2 µm are ~0.95 [5-8]. This can be tested by measureing reflectance, because Kirchoff’s Law holds that emissivity (e) = 1 – reflectance (r). The r of basalt in the NIR is ~0.05 [o] consistent with a NIR e of ~0.95 [5-8]. High-T NIR e’s of silicic igneous rocks (granitic, rhyolite) have been reported to be 0.8-0.9 [5,6], which is inconsistent with r values of 0.3-0.8 of such rocks at 25°C [9,10]. However, these measurements have been updated [7,8] and are consistent with the results here (see below and Fig. 3).

Treiman, A. H.↗
NASA NTRS1972

Apollo 15 rake sample microbreccias and non-mare rocks: Bulk rock, mineral and glass electron microprobe analyses

Quantitative electron microprobe data of Apollo 15 nonmare rake samples are presented. Bulk analyses of lithic fragments in the nomare rocks (expressed in oxide weight-percent) and the corresponding CIPW molecular norms are given. The mineralogy of the rocks and lithic fragments are also given; structural formulae for complete analyses and molecular end-members for all mineral analyses are included. The mineral analyses include pyroxene, olivine, plagioclase, barian K-feldspar, spinel and ilmenite, cobaltian metallic nickel-iron as well as SiO2-K2O-rich residual glass. Electron micropobe analyses (oxide weight percent) of glasses in loose fines and microbreccia samples and their CIPW molecular norms are presented along with electron microprobe data on bulk, mineral, and matrix glass from chondrules.

Hlava, P. F.↗
NASA NTRS1973

Lunar rock types - The role of plagioclase in non-mare and highland rock types

Some nonmare and highland rock types (14310 type KREEP and very high Al2O3 basalts) have the internal chemical variations expected for a plagioclase-liquid system. The observed Eu variations in these rock types suggest a D(Eu) 1/p of 0.6 to 0.7. The Sr variations suggest a D(Sr) 1/p of about 0.6, with values as low as 0.35 suggested for some materials from sample 14063. Common Apollo 14 KREEP and Apollo 15 KREEP do not show internal Sr, Eu, Al2O3 variations consistent with the D(Eu, Sr) 1/p values derived for 14310 type KREEP. Major element and experimental data indicate that olivine or pyroxene is a large, perhaps dominant, controller of chemical variations within common Apollo 14 KREEP. The application of these distribution coefficients to pure anorthosites like 15415 yields the model dependent conclusion that the silicate liquids with which such anorthosites may have been chemically equilibrated have not yet been analyzed and perhaps not directly sampled.

Hubbard, N. J.↗
NASA NTRS2018

In Situ Dating Experiments of Igneous Rocks Using the KArLE Instrument: A Case Study for Approximately 380 Ma Basaltic Rocks

We report new K-Ar isochron data for two approximately 380 Ma basaltic rocks, using an updated version of the Potassium-Argon Laser Experiment (KArLE). These basalts have K contents comparable to lunar KREEP basalts or igneous lithologies found by Mars rovers, whereas previous proof-of-concept studies focused primarily on more K-rich rocks. We continue to measure these analogue samples to show the advancing capability of in situ K-Ar geochronology. KArLE is applicable to other bodies including the Moon or asteroids.

Cho, Yuichiro↗
NASA NTRS2018

Dating Igneous Rocks Using the Potassium-Argon Laser Experiment (KArLE) Instrument: A Case Study for ~380 Ma Basaltic Rocks

We report new K-Ar isochron data for two approximately 380 million-years-old basaltic rocks, using an updated version of the Potassium-Argon Laser Experiment (KArLE), which is being developed for future in situ dating of planetary materials. These basalts have K contents comparable with those of lunar KREEP basalts or igneous lithologies found by Mars rovers, whereas previous proof-of-concept studies focused primarily on more K-rich rocks. We aim to measure these analogous samples to show the advancing capability of in situ K-Ar geochronology.

Cho, Yuichiro↗
NASA NTRS1980

A simulation model of temperature transitory on rocks having different thermal inertia. Analysis of the theoretical capacity of rock discrimination by remote sensing data

The possibility of identifying ground surface material by measuring the surface temperature at two different and significant times of the day was investigated for the case of hypothetical island whose rocky surface contained no vegetation and consisted of dolomite, clay, and granite. The thermal dynamics of the soil surface during a day in which atmospheric conditions were average for a latitude of about 40 deg to 50 deg were numerically simulated. The line of separation between zones of different materials was delineated by the range of temperature variation. Results show that the difference between maximum and minimum value of the temperature of ground surface during the day is linked to the thermal inertia value of the material of which the rock is formed.

Cassinis, R.↗