Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROTATING CYLINDER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effect of outer-cylinder rotation on the radially heated Taylor–Couette flow

A Taylor–Couette setup with radial heating is considered where a Boussinesq fluid is sheared in the annular region between two concentric, independently rotating cylinders maintained at different temperatures. Linear stability analysis is performed to determine the Taylor number for the onset of instability. Two radius ratios corresponding to wide and thin gaps with several rotation rate ratios are considered. The rotation of the outer cylinder is found to have a general stabilizing effect on the stability threshold as compared to pure inner-cylinder rotation, with a few exceptions. The radial heating sets up an axial flow which breaks the reflection symmetry of isothermal Taylor–Couette flow in the axial coordinate. This symmetry breaking separates linear stability thresholds, and we find the fastest growing modes with both positive and negative azimuthal numbers for different parameters. Another important finding of the current study is the discovery of unstable modes in the Rayleigh-stable regime. Furthermore, closed disconnected neutral curves (CDNCs) are observed for both wide and thin gaps which can separate from or merge into open neutral–stability curves. Alternatively, CDNCs can also morph into open neutral stability curves as the rotation rate ratio is changed. CDNCs are observed to be sensitive to changes in control parameters, and their appearance/disappearance is shown to induce discontinuous jumps in the critical Taylor number. Finally, for both wide and thin gaps, the fastest-growing modes found in the pure corotation case are shown to have their origins in the instability islands at smaller values of rotation rate ratios.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1982

A detailed treatment of two-dimensional, starved lubrication in the vicinity of two counter-rotating cylinders

The problem of starved lubrication in the inlet region for the case of line contact between two nondeforming, equal radii cylinders rotating in opposite directions with equal surface speeds is considered. The lubricant is assumed to be a constant density, isoviscous, Newtonian fluid. The usual approach, which involves the use of Reynolds equation everywhere, is not followed. Instead, the situation is restricted to one in which the lubricant enters the contact region in thin films which adhere to the cylinders. Using Reynolds equation only at the line of centers and a suitable thin film approximation far from that point, the intervening region is treated as a general creeping flow region. Solutions, incorporating complete free surface boundary conditions, are obtained numerically. The hitherto unobtained results due to this approach include the existence of a unique free surface location for a fixed set of operating conditions.

Medrow, R. A.↗
NASA NTRS1943

Turbulent Flow Between Rotating Cylinders

The turbulent air flow between rotating cylinders was investigated. The distributions of mean speed and of turbulence were measured in the gap between a rotating inner and a stationary outer cylinder. The measurements led to the conclusion that the turbulent flow in the gap cannot be considered two dimensional, but that a particular type of secondary motion takes place. It is shown that the experimentally found velocity distribution can be fully understood under the assumption that this secondary motion consists of three-dimensional ring-shape vortices. The vortices occur only in pairs, and their number and size depend on the speed of the rotating cylinder; the number was found to decrease with increasing speed. The secondary motion has an essential part in the transmission of the moment of momentum. In regions where the secondary motion is negligible, the momentum transfer follows the laws known for homologous turbulence. Ring-shape vortices are known to occur in the laminar flow between rotating cylinders, but it was hitherto unknown that they exist even at speeds that are several hundred times the critical limit.

Shih-I, Pai↗
NASA NTRS1925

Preliminary investigation of the effect of a rotating cylinder in a wing

Into the leading edge of a wing with arbitrary cross-section, there is introduced a cylinder, which can be rotated by an electric motor by means of a cord. Observations were made in the wind tunnel on how the lift at different wind velocities was affected by rotating this cylinder.

AERODYNAMICS - WIND PROPULSION↗
NASA NTRS1972

Flight tests of a rotating cylinder flap on a North American Rockwell YOV-10 aircraft

Flight tests were conducted of a twin engine airplane modified to a STOL configuration with rotating cylinder flaps and interconnected propellers. The flight tests included verification of the functional operation of the rotating cylinder flap system and the determination of the low speed flying qualities and performance characteristics with emphasis on approach and landing.

Cichy, D. R.↗
DOE OSTI2022

Gastight rotating cylinder electrode: Toward decoupling mass transport and intrinsic kinetics in electrocatalysis

Abstract Decoupling and understanding the various mass, charge, and heat transport phenomena involved in the electrocatalytic transformation of small molecules (i.e., CO 2 , CO, H 2 , N 2 , NH 3 , O 2 , and CH 4 ) is challenging but it can be readily achieved using dimensionless quantities (i.e., Reynolds, Sherwood, Schmidt, Damköhler, Nusselt, Prandtl, and Peclet Numbers) to simplify the characterization of systems with multiple interacting physical phenomena. Herein we report the development of a gastight rotating cylinder electrode cell with well‐defined mass transport characteristics that can be applied to experimentally decouple mass transfer effects from intrinsic kinetics in electrocatalytic systems. The gastight rotating cylinder electrode cell enables the dimensionless analysis of electrocatalytic systems and should enable the rigorous research and development of electrocatalytic technologies.

Jang, Joonbaek↗
NASA NTRS1973

Takeoff and landing performance and noise measurements of a deflected slipstream STOL airplane with interconnected propellers and rotating cylinder flaps

A YOV-10A aircraft was modified to incorporate rotating cylinder flaps and interconnected propellers with Lycoming T-53-L11 engines. Flight tests were made to evaluate the low speed handling qualities and performance characteristics. The flight test results indicated that landings could be made with approach speeds of 55 to 65 knots (CL = 4.5) and descent angles of 6 deg to 8 deg for total flap angles of 60 deg to 75 deg. At higher flap angles, deterioration of stability and control characteristics precluded attempts at landing. The noise level on the ground under an 8 deg landing approach path was below 86 PNdB at distances beyond 1 nautical mile from touchdown. Takeoffs were made with 30 deg to 45 deg flaps at lift off speeds of 75 to 80 knots and climb angles of 4 deg to 8 deg. Noise levels were below 83 PNdB at 3.5 nautical miles from the start of ground roll.

Weiberg, J. A.↗
NASA NTRS1959

Heat Transfer from a Horizontal Cylinder Rotating in Oil

Measurements of the heat transfer from a horizontal cylinder rotating about its axis have been made with oil as the surrounding fluid to provide an addition to the heat-transfer results for this system heretofore available only for air. The results embrace a Prandtl number range from about 130 to 660, with Reynolds numbers up to 3 x 10(exp 4), and show an increasing dependence of free-convection heat transfer on rotation as the Prandtl number is increased by reducing the oil temperature. Some correlation of this effect, which agrees with the prior results for air, has been achieved. At higher rotative speeds the flow becomes turbulent, the free- convection effect vanishes, and the results with oil can be correlated generally with those for air and with mass-transfer results for even higher Prandtl numbers. For this system, however, the analogy calculations which have successfully related the heat transfer to the friction for pipe flows at high Prandtl numbers fail.

Seban, R. A.↗
NASA NTRS1988

Primary instabilities and bicriticality in flow between counter-rotating cylinders

The primary instabilities and bicritical curves for flow between counter-rotating cylinders have been computed numerically from the Navier-Stokes equations assuming axial periodicity. The computations provide values of the Reynolds numbers, wavenumbers, and wave speeds at the primary transition from Couette flow for radius ratios from 0.40-0.98. Particular attention has been focused on the bicritical curves that separate (as the magnitude of counter-rotation is increased) the transitions from Couette flow to flows with different azimuthal wavenumbers m and m + 1. This lays the foundation for further analysis of nonlinear mode interactions and pattern formation occurring along the bicritical curves and serves as a benchmark for experimental studies. Preliminary experimental measurements of transition Reynolds numbers and wave speeds presented here agree well with the computations from the mathematical model.

Langford, W. F.↗