SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
In this work, the evolution of the surface during the steps that comprise the atomic layer deposition (ALD) of ruthenium films on a nickel substrate using tris(2,2,6,6-tetramethyl-3,5-heptanedionato)ruthenium(III) (Ru(tmhd) 3 ) and molecular oxygen was characterized using a combination of X-ray photoelectron (XPS) and reflection–absorption infrared (RAIRS) spectroscopies. The uptake of the Ru metalorganic precursor was determined to be activated, involving the average loss of two out of the three ligands (and the retention of the third, in molecular form, at the surface–vacuum interface), and self-limited, as required in ALD. The reaction of the resulting layer from that first half of the ALD cycle with O 2 proved to be more complex: in addition to the desired removal of the carbon-containing material, the Ni substrate becomes oxidized, and some Ru is etched away in the form of the volatile RuO 4 gas. By testing different combinations of exposures and temperatures it was determined that Ru film growth was possible, but tuning and optimizing the ALD or atomic layer etching (ALE) process conditions for maximum film growth or removal rate per cycle proved difficult. Replacing O 2 with H 2 was shown not to be viable either, as such an agent can reduce the nickel oxide formed after O 2 treatments (in fact, Ru(tmhd) 3 can do this as well) but not remove the carbonaceous material deposited on the surface by the Ru precursor. The use of N 2 O, on the other hand, showed much promise, being capable of removing most of the surface carbon without affecting the Ru film or the Ni substrate.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Here, three-dimensional (3D) monodispersed sea urchin-like Ru-doped rutile TiO 2 hierarchical architectures composed of radially aligned, densely-packed TiO 2 nanorods have been successfully synthesized via an acid-hydrothermal method at low temperature without the assistance of any structure-directing agent and post annealing treatment. The addition of a minuscule concentration of ruthenium dopants remarkably catalyzes the formation of the 3D urchin structure and drives the enhanced photocatalytic H 2 production under visible light irradiation, not possible on undoped and bulk rutile TiO 2 . Increasing ruthenium doping dosage not only increases the surface area up to 166 m 2 g –1 but also induces enhanced photoresponse in the regime of visible and near infrared light. The doping introduces defect impurity levels, i.e. oxygen vacancy and under-coordinated Ti 3+ , significantly below the conduction band of TiO 2 , and ruthenium species act as electron donors/acceptors that accelerate the photogenerated hole and electron transfer and efficiently suppress the rapid charge recombination, therefore improving the visible-light-driven activity.
Design and engineering of effective electrode catalysts represents a critical first step for hydrogen production by electrochemical water splitting. Nanocomposites based on ruthenium atomically dispersed within a carbon scaffold have emerged as viable candidates. In the present study, ruthenium metal centers are atomically embedded within graphitic carbon nitride/reduced graphene oxide nanosheets by thermal refluxing. Subsequent chemical reduction/oxidation leads to ready manipulation of the ruthenium valence state, as evidenced in microscopic and spectroscopic measurements, and hence enhancement/diminishment of the electrocatalytic activity towards hydrogen evolution reaction in both acidic and alkaline media. Further, this is largely ascribed to the increased/reduced contribution of the Ru valence electrons to the density of state near the Fermi level which dictates the binding and reduction of hydrogen. Results from this study highlight the significance of the valence state of metal centers in the manipulation and optimization of the catalytic performance of single atom catalysts.
Dicarbonyl[10,10-dimethyl-5,15-bis(pentafluorophenyl)biladiene]ruthenium(II), [Ru(C 33 H 16 F 10 N 4 )(CO) 2 ] or Ru(CO) 2 [DMBil1], is the first reported ruthenium(II) cis-dicarbonyl tetrapyrrole complex. The neutral complex sports two carbonyls and an oligotetrapyrrolic biladiene ligand. Notably, the biladiene adopts a coordination geometry that is well distorted from square planar and much more closely approximates a seesaw arrangement. Accordingly, Ru(CO) 2 [DMBil1] is not only the first ruthenium cis-dicarbonyl with a tetrapyrrole ligand, but also the first metal biladiene complex in which the tetrapyrrole does not adopt a (pseudo-)square-planar coordination geometry. Ru(CO) 2 [DMBil1] is weakly luminescent, displaying λ em = 552 nm upon excitation at λ ex = 500 nm, supports two reversible 1 e – reductions at –1.45 and –1.73 V (versus Fc + /Fc), and has significant absorption features at 481 and 531 nm, suggesting suitability for photocatalytic and photosensitization applications. While the structure of Ru(CO) 2 [DMBil1] was initially determined by X-ray diffraction, a traditionally acceptable quality structure could not be obtained (despite multiple attempts) because of consistently poor crystal quality. Furthermore, an independent structure obtained from electron diffraction experiments corroborates the structure of this unusual biladiene complex.
A ruthenium catalyst bearing a bidentate bis(carbene) ligand is prepared and studied as a catalyst for CO 2 electroreduction. The catalyst [Ru(tpy)(bis-mim)(MeCN)][PF 6 ] 2 (tpy) is 2,2′,:6′,2″-terpyridine; bis-mim is (methylenebis(N-methylimidazol-2-ylidene)) mediates reduction of CO 2 into CO with a turnover frequency of 630 s –1 and Faradaic efficiency (FE) of 30% at an overpotential of 730 mV. The strongly donating bis(carbene) ligand also enables access to a pathway operating at a lower overpotential of ca. 310 mV. While low-overpotential catalysis is slow in the dark (TOF = 0.01 s –1 ), visible light illumination increases the rate 10-fold (TOF = 0.11 s –1 ). Here, a full mechanistic picture is developed using kinetic analysis from cyclic voltammetry, spectroelectrochemistry, and computational methods, with the bis-mim ligand facilitating rapid CO 2 activation at low overpotentials. Comparisons with other ruthenium catalysts yield insight into the ability to tune the rate of chemical steps (e.g., ligand dissociation and CO 2 nucleophilic attack) and the overpotential by tailoring the primary coordination sphere while retaining the “redox-active” tpy ligand.
The sluggish kinetics of methanol oxidation reaction (MOR) is a major barrier to the commercialization of direct methanol fuel cells (DMFCs). In this study, we report a facile synthesis of platinum–ruthenium nanotubes (PtRuNTs) and platinum–ruthenium-coated copper nanowires (PtRu/CuNWs) by galvanic displacement reaction using copper nanowires as a template. The PtRu compositional effect on MOR is investigated; the optimum Pt/Ru bulk atomic ratio is about 4 and surface atomic ratio about 1 for both PtRuNTs and PtRu/CuNWs. Enhanced specific MOR activities are observed on both PtRuNTs and PtRu/CuNWs compared with the benchmark commercial carbon-supported PtRu catalyst (PtRu/C, Hispec 12100). Finally, x-ray photoelectron spectroscopy (XPS) reveals a larger extent of electron transfer from Ru to Pt on PtRu/CuNWs, which may lead to a modification of the d-band center of Pt and consequently a weaker bonding of CO (the poisoning intermediate) on Pt and a higher MOR activity on PtRu/CuNWs.
The mechanistic roles of free hydronium ions, surface hydrides, and interfacial protons during guaiacol hydrodeoxygenation (HDO) on ruthenium nanoparticles are established. As guaiacol adsorbs on Ru, it loses its strong aromaticity and undergoes a rapid H-shift from its hydroxyl to meta carbons (in relation to its hydroxyl group), leading enol and keto surface isomers to exist in chemical equilibrium. HDO occurs via a hydridic H-adatom (H*) attack to the enol, followed by a kinetically relevant C-O bond rupture step, during which water shuttles the hydroxyl proton, enabling its intramolecular attack to the methoxy, evolving a high charged [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state. The competing HYD begins with a rapid H* attack to the keto, before a second, kinetically relevant H* attack, without proton involvement. Water, despite shifting the thermodynamics towards the more polar surface keto, promotes HDO to a much greater extent than HYD, because of its dual catalytic roles—it mobilizes hydroxyl proton (Brønsted acid) to cleave the strong C-O bond, synchronizing with the Ru metal surface (base) function that stabilizes the resulting [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state, and the water layers solvate this charged transition state, further reducing its free energy. Free hydronium ions do catalyze a separate homogeneous enol-keto isomerization, but this reaction is kinetically unrelated to HDO catalysis. This mechanistic picture explains the strong effects of polar protic solvent in hydrodeoxygenation, highlighting (i) the requirements of surface hydrides and interfacial protons acting in tandem to complete a HDO turnover and (ii) the cooperative role of protic solvent and metal surface in breaking the aromaticity and stabilizing charged reactive precursors and transition states.
Cyclopentadienyl and pentamethylcyclopentadienyl ruthenium(II) complexes have been synthesized with cyclic (RPCH 2 NR'CH 2 ) 2 ligands, with the goal of using these [Cp R" Ru(P R 2 N R' 2 )] + complexes for catalytic O 2 reduction to H 2 O (R = t-butyl, phenyl; R' = benzyl, phenyl; R" = methyl, H). In each compound, the Ru is coordinated to the two phosphines, positioning the amines of the ligand in the second coordination sphere where they may act as proton relays to a bound dioxygen ligand. The phosphine, amine, and cyclopentadienyl substituents have been systematically varied in order to understand the effects of each of these parameters on the properties of the complexes. These Cp R" Ru(P R 2 N R' 2 ) + complexes react with O 2 to form η 2 -peroxo complexes, which have been characterized by NMR, IR, and X-ray crystallography. The peak reduction potentials of the O 2 ligated complexes have been shown by cyclic voltammetry to vary as much as 0.1 V upon varying the phosphine and amine. In the presence of acid, protonation of these complexes occurs at the pendent amine, forming a hydrogen bond between the protonated amine and the bound O 2 . The ruthenium–peroxo complexes decompose upon reduction, precluding catalytic O 2 reduction. Finally, the irreversible reduction potentials of the protonated O 2 complexes depend on the basicity of the pendent amine, giving insight into the role of the proton relay in facilitating reduction.
A ruthenium complex of the tripodal ligand tris(2-pyridyl)phosphine oxide exhibits rapid water oxidation electrocatalysis over a wide pH range.
The coordination of tBu PONOP ( tBu PONOP=2,6-bis(ditert-butylphosphinito)pyridine) to different ruthenium starting materials, to generate ( tBu PONOP)RuCl 2 , was investigated in this paper. The resultant ( tBu PONOP)RuCl 2 reactivity with three different silanes was then investigated and contrasted dramatically with the reactivity of ( iPr PONOP)RuCl 2 (DMSO) ( iPr PONOP=2,6-bis(diisopropylphosphinito)pyridine) with the same silanes. The 16-electron species ( tBu PONOP)Ru(H)Cl was produced from the reaction of triethylsilane with ( tBu PONOP)RuCl 2 . Reactions of ( tBu PONOP)RuCl 2 with both phenylsilane or diphenylsilane afforded the 16-electron hydrido-silyl species ( tBu PONOP)Ru(H)(PhSiCl 2 ) and ( tBu PONOP)Ru(H)(Ph 2 SiCl), respectively. Reactions of all three of these complexes with silver triflate afforded the simple salt metathesis products of ( tBu PONOP)Ru(H)(OTf), ( tBu PONOP)Ru(H)(PhSiCl(OTf)), and ( tBu PONOP)Ru(H)(Ph 2 Si(OTf)). Formic acid dehydrogenation was performed in the presence of triethylamine (TEA), and each species proved competent for gas-pressure generation of CO 2 and H 2 . Finally, the hydride species ( tBu PONOP)Ru(H)Cl, ( tBu PONOP)Ru(H)(OTf), and ( tBu PONOP)Ru(H)(PhSiCl 2 ) exhibited faster catalytic activity than the other compounds tested.
Not provided.
Noble metal oxides such as RuO2 are the state-of-the-art electrocatalysts for anodic reactions in acidic electrolytes, but their scarcity and moderate activity greatly limit emerging renewable energy technologies. Here, we show that oxidized overlayers of ruthenium on earth-abundant manganese oxide (MnO2/o-RuOx) nanocrystal supports exhibit Ru chemical states associated with reduced Ru–O–Ru coordination that enable dynamic switching of hydrogen bonding, with *OH intermediates hydrogen bonding to surface O and *OOH intermediates bonding to protruding RuOx clusters. The resulting electrocatalysts exhibit an overpotential of 218.9 ± 0.3 mV at 10 mA cm–2 for the oxygen evolution reaction in acid, corresponding to a 2425% increase in Ru mass activity compared to RuO2, enabling the construction of electrolyzers that achieved 3 A cm–2 at 1.646 V, 5.54 A cm–2 at 1.8 V, and exhibited over 3000-h stability at 100 mA cm–2. These findings motivate further efforts to develop nanomaterials that harness reduced Ru–O–Ru coordination to enable emerging renewable energy technologies.