Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ranger”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Development of an interchangeable end effector mechanism for the Ranger telerobotic vehicle

The Ranger program at the Space Systems Laboratory (SSL) at the University of Maryland is a demonstration of an extremely low cost, space flight experiment. The Ranger vehicle is designed to perform teleoperated spacecraft maintenance. Completing the various tasks included in spacecraft maintenance requires several specific tools. This paper describes the Ranger interchangeable end effector mechanism (IEEM). Its design allows Ranger to change end effectors to utilize the appropriate tool for the various tasks. The Ranger vehicle is designed with four manipulators. A seven degree-of-freedom (DOF) grappling manipulator securely attaches the vehicle to the work site. A 6 DOF camera positioning manipulator allows the operator to position a stereo pair of video cameras for visual feedback. The two remaining manipulators are the 7 DOF dexterous arms. They are the primary means by which Ranger accomplishes its required tasks. At the end of each of these dexterous manipulators is an IEEM. This paper begins with a brief overview of the Space Systems Laboratory and the Ranger program. The constraints leading to the requirements for an IEEM are described. The following section then describes the design strategies and the down selection process resulting in two candidate designs, taper and pneumatic connector type. Next, the leading candidate design is described in detail, followed by a preliminary discussion of failure modes and planned testing. The paper concludes with a brief review and a section discussing future work.

Cohen, Robert↗
NASA NTRS1992

Manipulator design and development for the Ranger satellite servicing vehicle

The Ranger program is a planned series of low cost telerobotics flight experiments, based on the use of Pegasus launch vehicles. As the first step towards this goal, the Space Systems Lab was developing a neutral buoyancy version of Ranger for use in design verification and operations testing. The design approach and results of the Ranger manipulator development program is related. Ranger is designed to incorporate four appendages: a pair of dexterous, seven degree of freedom manipulators for general manipulation; a six DOF grappling arm for securing the vehicle to the local work site; and a five DOF positioning manipulator for the stereo camera pair that provide feedback to the remote operator. Each of these manipulators incorporate unique approaches to satisfying design requirements. The numerical and operational requirements are given for Ranger manipulators, and the evolution is discussed of the differing design approaches based on similarities and differences in the requirements. Testing results for individual joints and manipulator assemblies are presented, followed by initial results of operational testing on satellite servicing tasks with the integrated Ranger neutral buoyancy vehicle.

Howard, Russell D.↗
NASA NTRS1964

Thermal testing of the Ranger Block III SPACECRAFT in the JPL 25 ft. space simulator

In January, 1964, a test program was begun on the thermal design of the Ranger Block III Spacecraft. The tests were performed i n the newly operational JPL 25' Space Simulator over a period of 6 months . The objectives of these tests were two-fold: A. To evaluate the 25' Space Simulator as a facility for proving the thermal design of spacecrafts, and B. To verify .the thermal design of the Ranger Block III spacecraft. These two objectives are complimentary in the test series performed and are difficult to separate into distinct categories. An important part of the first objective was to learn what type of test preparation, instrumentation, and analysis was required for the meaningful evaluation of test data from the 25' Space Simulator tests. Although some experience had been gained in testing of components and incomplete spacecrafts in smaller solar simulation chambers during the early part of the Ranger program, we knew little about testing of a complete spacecraft in the 25' Space Simulator when this test program began. Test analysis requires that the energy absorbed by various spacecraft components be known. This requires a knowledge of the area of solar absorption or sunlit area, the solar energy flux density on the area, and the effective absorptance of that area. Most of the problems encountered were associated with the determination of the last two quantities since the sunlit area may be obtained directly by inspection of spacecraft surfaces. This paper will present a discussion of our experiences during the Ranger Block III thermal test series on the Thermal Test Model (TCM). The TCM was thermally equivalent to the flight type Ranger spacecraft except for the lack of an antenna dish and solar panels. Flight type structural hardware was used with surface finishes equivalent to those of the flight spacecraft. Aluminum blocks simulated the spacecraft electronics thermal masses with resistance heaters simulating the electronic power dissipation. The discussion will be presented in a semi-chronological order and will be divided into the following areas: 1. Determination of solar simulation flux density on spacecraft surfaces. 2. Problems related to decollimation of the solar simulation source. 3. Determination of effective absorptance in the solar simulation spectrum.

SPACE SIMULATOR↗
NASA NTRS1960

Ranger Spacecraft

The thermal-control philosophy of the spacecraft currently under development by the Jet Propulsion Laboratory is design by passive means to maintain all components within the tolerances specified by cognizant engineers. Due to the complexity of the configurations, calculations are) of necessity, fairly generalized and final design is based upon tests in an environmental chamber. The Ranger series spacecraft is designed with a basic structure which is common to all models, with additional hardware to suit the individual mission. This basic structure of Rangers A-1 and A-2 is seen as the hexagonal instrument section, the erectable solar panels, the movable antenna, and the omniantenna. The Ranger A-1 and A-2 configuration is for engineering tests and space-exploration, with the scientific instrumentation isolation requirement dictating the spread-out design. The spacecraft stands 12 feet high, weighs 700 to 800 pounds, and has an internal power of 150 watts. Rangers A-3, A-4, and A-5 are designed to rough land a capsule on the moon. For these, a capsule and retrorocket replace the scientific instruments, occupying the space inside the tower structure. The spacecraft must survive many environments. Chronologically they are: 1) Folded configuration inside an aerodynamic shroud on the pad. 2) Thermal flux from shroud aerodynamically heated during boost phase. 3) Coasting up to 30 minutes attached to Agena stage after booster and shroud are separated. 4) Agena stage burning. 5) Coasting and tumbling after separation from Agena until it passes from earth's shadow. 6) Upon reaching sunlight, panels open and begin sun acquisition. 7) Antenna seeks earth after spacecraft locks onto sun. 8) Space phase- "steady state" with vehicle's vertical axis locked on sun, communicating with earth. The philosophy is to design for the sun-acquired mode, making allowances for the transient conditions.

Thostesen, T. O.↗
NASA NTRS1963

RANGER PROJECT STATUS

Status of the ranger project, a program for obtaining lunar surface data in preparation for manned flights, noting results of the four ranger flights

RANGER PROJECT↗
NASA NTRS1996

Obstacle Detection for the Ranger Telerobotic Flight Experiment

This paper describes the approach and algorithms developed for model-based obstacle detection and distance computation for the NASA Ranger Telerobotic Flight Experiment. Objects of interest, such as manipulator arms, the Ranger vehicle and solar arrays, are modeled using a small set of component types.

model-based obstacle detection manipulator arms Ra↗
NASA NTRSDate not supplied

Planetary Protection, Parts, and Perception: The Ranger Missions as the Origin Story of the Myth of Planetary Protection-Related Mission Failures

There has been a long-standing perspective in the planetary engineering community that the use of planetary protection sterilization techniques such as dry heat microbial reduction (DHMR) have led to significant mission failures in the past. This perception has led to a hesitation to craft mission designs that incorporate sterilization beyond the component-level. Via interviews with long-standing members of the planetary engineering community across the Agency, we have identified the root historical missions that have driven this perspective. The source, or Origin Story, which has been passed down to subsequent generations of engineers, is the failures tied to the early series of the Ranger missions. In this presentation, we examine the details behind the Ranger failures, the majority of which are non-planetary protection sterilization-related, and bring to light the myth of this perception.

planetary protection↗
NASA NTRS1972

Ranger and other impact craters photographed by Apollo 16, part J

The Apollo 16 crew photographed an unusual variety of impact craters, including the two craters produced by the impacts of Ranger 7 and 9 spacecraft, small craters produced by boulders as they bounced downslope, craters with marked bilateral symmetry, and primary craters with a wide range of morphologies and sizes. Ranger impact craters and examples of other craters are briefly discussed. This photography has supplied important new data on craters in the lunar surface. Continued study of these craters and use of the metrical capabilities of the metric and panoramic camera photography will yield additional scientific results on lunar craters.

Moore, H. J.↗
NASA NTRS1963

RANGER PREFLIGHT SCIENCE ANALYSIS AND THE LUNAR PHOTOMETRIC MODEL

A photometric model of the lunar mare surface is presented. The lighting parameters for the Ranger 3,4, and 5 TV system are developed using the photometric model, and related to the system parameters. The interactions of the TV constraints with those imposed by the other experiments and by trajectory characteristics are discussed in detail, and the use of plastic spheres to show graphically the interrelationships among the parameters is described.

PHOTOMETRY↗
NASA NTRS1945

An Investigation of the Ranger V-770-8 Engine Installation for the Edo XOSE-1 Airplane I : Cooling

Engine temperature data and cooling correlating analyses of the engine and oil cooler are presented in connection with an investigation of the cowling and cooling of the ranger V-770-8 engine installation in the Edo XOSE-1 airplane. Three types of baffles were installed in the course of the tests: the conventional, the turbulent-flow, and the NACA diffuser baffles. Each of the types was of merit in cooling a different region on the cylinder. Incorporation of the best features of the three types into one baffle, a method which appears to be feasible, would provide improvements in cylinder cooling.

COOLING TESTS↗