Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rayleigh wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Rayleigh wave effects in an elastic half-space.

Consideration of Rayleigh wave effects in a homogeneous isotropic linearly elastic half-space subject to an impulsive uniform disk pressure loading. An approximate formula is obtained for the Rayleigh wave effects. It is shown that the Rayleigh waves near the center of loading arise from the portion of the dilatational and shear waves moving toward the axis, after they originate at the edge of the load disk. A study is made of the vertical displacement due to Rayleigh waves at points on the axis near the surface of the elastic half-space.

Aggarwal, H. R.↗
DOE OSTI2023

Thermo-acoustoelastic effect of Rayleigh wave: Theory and experimental verification

Previous studies showed that the thermally-induced ultrasonic bulk wave velocity change could be used to measure acoustoelastic coefficients and third-order elastic constants of elastic materials. This method is naturally immune from the ambient temperature effect and has improved sensitivity and a simpler test setup than the conventional acoustoelastic test. However, Rayleigh wave is preferred for thick components or structures with only one accessible surface. In this work, the thermo-hyperelastic constitutive equation, along with acoustoelastic theory, is used to derive the expression of the thermo-acoustoelastic coefficient (TAEC) of Rayleigh wave. The numerical relationship between the TAEC of Rayleigh wave and Murnaghan constants ( l, m and n ) are given for common metals. Further, the TAEC expressions for Rayleigh wave and shear wave are similar, and both are dominated by the constant m . The TAEC of Rayleigh wave was measured on an aluminum 6061 specimen using the thermal modulation experiment in a temperature range of 22 ~ 35°C. The measured TAEC shows good agreement with the theoretical calculation. Then the third-order elastic constants were calculated based on TAECs of bulk waves and Rayleigh wave.

42 ENGINEERING↗
DOE OSTI2021

Rayleigh Wave Propagation in the Bighorn Mountains Region, Wyoming

Short-period Rayleigh waves, Rg , provide strong constraints on the depth of shallow seismic events and are of interest for monitoring small explosions. Characterizing the seismic sources that generate Rg requires an understanding of how shallow crustal structure affects Rayleigh wave propagation. Here, in support of these efforts, this study utilizes observed waveforms from small shallow explosions recorded on temporary seismic network deployments in the Bighorn region, Wyoming. We study regional near-surface geology by measuring changes in surface-wave amplitude and polarization during propagation through basins, foothills, and mountains. We develop additional insight by carrying out surface-wave eigenfunction analyses and numerical-wave simulations, which together reproduce many characteristics seen in the observed waveforms. Our results show how sedimentary basins in the Bighorn region allow for amplified prograde-polarized higher-mode and retrograde-polarized fundamental-mode Rayleigh waves, whereas adjacent mountains only support retrograde motion. These different modes provide distinct constraints on the Earth structure and source characteristics, potentially enabling targeted inversions in future studies. Finally, our findings provide insight into Rg propagation through complex near-surface geology, improving our understanding of shallow propagation and source effects that are relevant to explosion monitoring efforts.

58 GEOSCIENCES↗
DOE OSTI2026

The Scaling and Units of the Elastic Response Term for Rayleigh Waves that is Output by Computer Programs in Seismology (CPS)

We report on the scaling and units of the Rayleigh wave elastic response function A R (ω) that is output from the widely used Computer Programs in Seismology (CPS) to aid in the modeling of ground motion sourced by atmospheric explosions. The program uses mixed units (km, second, km/s, gm/cc) to keep A R (ω) near 10 0 and prevent any numerical underflow or overflow. We compare two models for the response of an elastic half space to the output from CPS. Our application inputs the recommended, mixed unit geological models to determine how researchers must scale this output to obtain physical units for A R (ω) that represents the amplitude scaling for the minimum group velocity (Airy phase) contribution to Rayleigh waves. We determine that a CPS user must scale the output for A R (ω) by 10 -12 (m/km) 2 (g/cc/m 3 /kg) to obtain MKS (meter, kg, second) units and then must multiply this result by the vertical component eigenfunction squared, that is evaluated at the free surface.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Engineering the beat phenomenon of quasi-Rayleigh waves for regions with minimal Surface Acoustic Wave (SAW) amplitude

Surface Acoustic Waves (SAW) are prevalent in a variety of scientific fields. Typically, the ability to manipulate these surface waves has a significant impact on the efficacy of any SAW-based device. In this paper, we present a simple method for designing localized regions that have minimal SAW amplitude. These localized regions have valley-like drops in SAW amplitude and are achieved by using the spatial beat phenomenon of quasi-Rayleigh waves. Controlling the beat phenomenon allows us to manipulate where and how these localized regions appear in the waveguide. In particular, the localized regions can be designed to have variable widths and can be positioned consecutively due to minimal wave scattering. The design methodology and physics are described in detail, and several supplementary simulations are provided to demonstrate the efficacy of the proposed method. Finally, we briefly discuss how the proposed approach could potentially be exploited to implement a localized high-pass filter and enables SAW wave propagation that avoids surface obstacles.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hypothesis tests on Rayleigh wave radiation pattern shapes: a theoretical assessment of idealized source screening

SUMMARY Shallow seismic sources excite Rayleigh wave ground motion with azimuthally dependent radiation patterns. We place binary hypothesis tests on theoretical models of such radiation patterns to screen cylindrically symmetric sources (like explosions) from non-symmetric sources (like non-vertical dip-slip or non-VDS faults). These models for data include sources with several unknown parameters, contaminated by Gaussian noise and embedded in a layered half-space. The generalized maximum likelihood ratio tests that we derive from these data models produce screening statistics and decision rules that depend on measured, noisy ground motion at discrete sensor locations. We explicitly quantify how the screening power of these statistics increase with the size of any dip-slip and strike-slip components of the source, relative to noise (faulting signal strength) and how they vary with network geometry. As applications of our theory, we apply these tests to (1) find optimal sensor locations that maximize the probability of screening non-circular radiation patterns and (2) invert for the largest non-VDS faulting signal that could be mistakenly attributed to an explosion with damage, at a particular attribution probability. Finally, we quantify how certain errors that are sourced by opening cracks increase screening rate errors. While such theoretical solutions are ideal and require future validation, they remain important in underground explosion monitoring scenarios because they provide fundamental physical limits on the discrimination power of tests that screen explosive from non-VDS faulting sources.

58 GEOSCIENCES↗
DOE OSTI2022

Removal of Non-Specifically Bound Proteins Using Rayleigh Waves Generated on ST-Quartz Substrates

Label-free biosensors are plagued by the issue of non-specific protein binding which negatively affects sensing parameters such as sensitivity, selectivity, and limit-of-detection. In the current work, we explore the possibility of using the Rayleigh waves in ST-Quartz devices to efficiently remove non-specifically bound proteins via acoustic streaming. A coupled-field finite element (FE) fluid structure interaction (FSI) model of a surface acoustic wave (SAW) device based on ST-Quartz substrate in contact with a liquid loading was first used to predict trends in forces related to SAW-induced acoustic streaming. Based on model predictions, it is found that the computed SAW body force is sufficient to overcome adhesive forces between particles and a surface while lift and drag forces prevent reattachment for a range of SAW frequencies. We further performed experiments to validate the model predictions and observe that the excitation of Rayleigh SAWs removed non-specifically bound (NSB) antigens and antibodies from sensing and non-sensing regions, while rinsing and blocking agents were ineffective. An amplified RF signal applied to the device input disrupted the specific interactions between antigens and their capture antibody as well. ST-quartz allows propagation of Rayleigh and leaky SH-SAW waves in orthogonal directions. Thus, the results reported here could allow integration of three important biosensor functions on a single chip, i.e., removal of non-specific binding, mixing, and sensing in the liquid phase.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1973

On the surface-to-bulk mode conversion of Rayleigh waves.

Surface-to-bulk wave conversion phenomena occurring at a discontinuity characterized by a surface contour deformation are shown to be usable as a means for tapping Rayleigh waves in a nonpiezoelectric solid. A boundary perturbation technique is used in the treatment of the mode conversion problem. A systematic procedure is presented for calculating not only the first-order scattered waves, which include the reflected surface wave and the converted bulk wave, but also the higher order terms.

Chang, C.-P.↗
DOE OSTI2025

Simulating Isotropic Rayleigh Wave Horizontal to Vertical Ratios at Rock Valley

Elastic anisotropy in the subsurface can manifest from pre-existing structure or stress-induced cracking – both phenomena are of interest at the Rock Valley site in Nevada. The azimuthal dependence of Rayleigh wave ellipticity, also known as H/V, can reveal elastic anisotropy, but the effect of isotropic variability in H/V must first be accounted for. To that end, we simulate synthetic seismograms from a ring of sources in a fully 3-D isotropic velocity model that captures the geology at Rock Valley. We measure H/V from these waveforms and compare them with H/V predictions obtained using 1D models extracted at specific locations from the 3D model. We find that an average of the azimuthal H/V measurements from the 3-D simulations and 1-D predictions agree, but that the azimuthal variability of H/V is a large fraction of the mean value. These results estimate the noise character in azimuthal H/V so it can be factored out of future anisotropic simulations.

58 GEOSCIENCES↗
NASA NTRS1983

Lateral heterogeneity and azimuthal anistropy of the upper mantle: Love and Rayleigh waves 100-250 sec

The lateral heterogeneity and apparent anisotropy of the upper mantle are studied by measuring Rayleigh and Love wave phase velocities in the period range 100-250 sec. Spherical harmonic descriptions of the lateral heterogeneity are obtained for order and degree up to 1=m=10. Slow regions are evident at the East Pacific rise, northeast Africa, Tibet, Tasman sea, southwestern North America and triple junctions in the Northern Atlantic and Indian oceans. Fast regions occur in Australia, western Pacific and the eastern Atlantic. Details which are not evident in previous studies include two fast regions in the central Pacific and the subduction zone in the Scotia Arc region. Inversion for azimuthal dependence showed (1) little correlation between the fast phase velocity directions and the plate motion vector in plate interiors, but (2) correlation of the fast direction with the perpendicular direction to trenches and ridges. Phase velocity is high when waves propagate perpendicular to these structures. Severe tradeoffs exist between heterogeneity and azimuthal dependence because of the yet unsatisfactory path coverage.

Tanimoto, T.↗
NASA NTRS1985

Lateral heterogeneity and azimuthal anisotropy of the upper mantle - Love and Rayleigh waves 100-250 sec

The lateral heterogeneity and apparent anisotropy of the upper mantle are studied by measuring Rayleigh and Love wave phase velocities in the period range 100-250 sec. Spherical harmonic descriptions of the lateral heterogeneity are obtained for order and degree up to 1=m=10. Slow regions are evident at the East Pacific rise, northeast Africa, Tibet, Tasman sea, southwestern North America and triple junctions in the Northern Atlantic and Indian oceans. Fast regions occur in Australia, western Pacific and the eastern Atlantic. Details which are not evident in previous studies include two fast regions in the central Pacific and the subduction zone in the Scotia Arc region. Inversion for azimuthal dependence showed (1) little correlation between the fast phase velocity directions and the plate motion vector in plate interiors, but (2) correlation of the fast direction with the perpendicular direction to trenches and ridges. Phase velocity is high when waves propagate perpendicular to these structures. Severe tradeoffs exist between heterogeneity and azimuthal dependence because of the yet unsatisfactory path coverage.

Tanimoto, T.↗