Search NASA⌕ Search

SEARCH · Search NASA

Results for “ReaxFF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Surrogate Fuel Chemistry from ReaxFF Molecular Dynamics

Reactive molecular dynamics with ReaxFF simulations are used to study the chemistry of four component jet fuel mixtures of n-dodecane, iso-octane, n-propylbenzene, and mesitylene. ReaxFF does not require knowledge of the chemistry a priori providing insight into reactions otherwise not seen in established chemical kinetic mechanisms. The results show that a difference in the local chemical environment can change the fuel decomposition pathways across the surrogate mixtures where the same fuel species are used. These simulations highlight the need to consider cross-chemical interactions in chemical kinetic mechanism development and the importance of resonance stabilized polyaromatic hydrocarbon reactions for soot growth and formation. A method for predicting the threshold sooting index from the carbon species formed at the end of the simulations is established. The results of the simulations are consistent with measurements of the threshold sooting index with the predicted values within 20% of the measured data

Surrogate Fuels↗
NASA NTRS2016

Molecular Dynamics Modeling of Carbon Nanotube Composite Fracture Using ReaxFF

Carbon nanotube (CNT) fiber reinforced composites with specific tensile strengths and moduli approaching those of aerospace grade carbon fiber composites have recently been reported. This achievement was enabled by the emerging availability of high N/tex yarns in kilometer-scale quantities. While the production of this yarn is an impressive advance, its strength is still much lower than that of the individual CNTs comprising the yarn. Closing this gap requires understanding load transfer between CNTs at the nanometer dimensional scale. This work uses reactive molecular dynamics simulations to gain an understanding at the nanometer scale of the key factors that determine CNT nanocomposite mechanical performance, and to place more realistic upper bounds on the target properties. While molecular dynamics simulations using conventional force fields can predict elastic properties, the ReaxFF reactive forcefield can also model fracture behavior because of its ability to accurately describe bond breaking and formation during a simulation. The upper and lower bounds of CNT composite properties are investigated by comparing systems composed of CNTs continuously connected across the periodic boundary with systems composed of finite length CNTs. These lengths, effectively infinite for the continuous tubes and an aspect ratio of 13 for the finite length case, result from practical limitations on the number of atoms that can be included in a simulation. Experimentally measured aspect ratios are typically on the order of 100,000, so the calculated results should represent upper and lower limits on experimental mechanical properties. Finally, the effect of various degrees of covalent crosslinking between the CNTs and amorphous carbon matrix is considered to identify the amount of CNT-matrix covalent bonding that maximizes overall composite properties.

Jensen, Benjamin D.↗
NASA NTRS2015

Effects of Atomic-Scale Structure on the Fracture Properties of Amorphous Carbon - Carbon Nanotube Composites

The fracture of carbon materials is a complex process, the understanding of which is critical to the development of next generation high performance materials. While quantum mechanical (QM) calculations are the most accurate way to model fracture, the fracture behavior of many carbon-based composite engineering materials, such as carbon nanotube (CNT) composites, is a multi-scale process that occurs on time and length scales beyond the practical limitations of QM methods. The Reax Force Field (ReaxFF) is capable of predicting mechanical properties involving strong deformation, bond breaking and bond formation in the classical molecular dynamics framework. This has been achieved by adding to the potential energy function a bond-order term that varies continuously with distance. The use of an empirical bond order potential, such as ReaxFF, enables the simulation of failure in molecular systems that are several orders of magnitude larger than would be possible in QM techniques. In this work, the fracture behavior of an amorphous carbon (AC) matrix reinforced with CNTs was modeled using molecular dynamics with the ReaxFF reactive forcefield. Care was taken to select the appropriate simulation parameters, which can be different from those required when using traditional fixed-bond force fields. The effect of CNT arrangement was investigated with three systems: a single-wall nanotube (SWNT) array, a multi-wall nanotube (MWNT) array, and a SWNT bundle system. For each arrangement, covalent bonds are added between the CNTs and AC, with crosslink fractions ranging from 0-25% of the interfacial CNT atoms. The SWNT and MWNT array systems represent ideal cases with evenly spaced CNTs; the SWNT bundle system represents a more realistic case because, in practice, van der Waals interactions lead to the agglomeration of CNTs into bundles. The simulation results will serve as guidance in setting experimental processing conditions to optimize the mechanical properties of CNT composites.

Jensen, Benjamin D.↗
NASA NTRS2018

Simulating the Effects of Carbon Nanotube Continuity and Interfacial Bonding on Composite Strength and Stiffness

Molecular dynamics simulations of carbon nanotube (CNT) composites, in which the CNTs are continuous across the periodic boundary, overestimate the experimentally measured mechanical properties of CNT composites along the fiber direction. Since the CNTs in these composites are much shorter than the composite dimensions, load must be transferred either directly between CNTs or through the matrix, a mechanism that is absent in simulations of effectively continuous CNTs. In this study, the elastic and fracture properties of high volume fraction discontinuous carbon nanotube/amorphous carbon composite systems were compared to those of otherwise equivalent continuous CNT composites using ReaxFF reactive molecular dynamics simulations. These simulations were used to show how the number of nanotube-matrix interfacial covalent bonds affect composite mechanical properties. Furthermore, the mechanical impact of interfacial bonding was decomposed to reveal its effect on the properties of the CNTs, the interfacial layer of matrix, and the bulk matrix. For the composites with continuous reinforcement, it was found that any degree of interfacial bonding has a negative impact on axial tensile strength and stiffness. This is due to disruption of the structure of the CNTs and interfacial matrix layer by the interfacial bonds. For the discontinuous composites, the modulus was maximized between 4%-7% interfacial bonding and the strength continues to increase up to the highest levels of interfacial bonding studied. Areas of low stress and voids were observed in the simulated discontinuous composites at the ends of the tubes, from which fracture was observed to initiate. Experimental carbon nanotube yarn composites were fabricated and tested. The results were used to illustrate knockdown factors relative to the mechanical performance of the tubes themselves.

Benjamin D Jensen↗
NASA NTRSDate not supplied

Predicting Char Yield of High-Temperature Resins

A simulation protocol is developed to predict the char yield of organic resins during high-temperature processing. Such in silico methods can help screen promising new formulations for advanced materials, but previously no chemistry-sensitive technique existed to predict the important experimental value of char yield. The method utilizes a reactive force field (ReaxFF) to model the chemical transformation of precursor monomers into carbonized structures during three processing stages: ramp-up to processing temperatures (~3000 K), pyrolysis, and quenching. Achieving good agreement with experimental char yields requires continuous removal of small byproduct molecules to mimic outgassing, and the application of high pressure to eliminate porosity and encourage graphitization. More than ten different resin chemistries are investigated, including arylacetylenes, cyanate esters, phthalonitriles, and polyimides, representing a diverse group of precursors with respect to initial cyclic content, heteroatoms and reactive groups. The protocol correctly predicts the relative char yield between the investigated chemistries and provides quantitative agreement with experimental values, especially for high char yield resins. The properties of the resins during processing are compared, including outgassing products, morphology of the final chemical configurations, cyclic content and mechanical properties.

polymer simulations, molecular dynamics↗
NASA NTRSDate not supplied

Predicting Char Yield of High-Temperature Resins

A simulation technique has been developed for predicting the char yield of organic resins during high-temperature processing. In silico methods can aid in the screening of new advanced materials for a number of important properties, but no chemistry-sensitive protocol currently exists for predicting the important experimental value of char yield. The proposed method utilizes a reactive force field (ReaxFF) to model the chemical transformation of precursor monomers into carbonized structures during three processing stages: ramp-up to pyrolysis temperatures (~3000 K), pyrolysis, and quenching. Achieving good agreement with experimental char yields requires continuous removal of small by-product molecules to mimic outgassing, and the application of high pressure to encourage the formation of a dense, glassy network. Six different resin chemistries were investigated: an ethynyl, a phenylethynyl, a cyanate ester, a phthalonitrile, acrylonitrile, and adamantane. These candidates represent a diverse group of precursors with respect to initial cyclic content, presence of heteroatoms, and types of reactive groups. The protocol developed accurately predicts the relative char yield between the investigated chemistries and provides quantitative agreement with experimental values, especially for high char yield resins. Several simulated properties of the carbonized structures are compared with experimental results, including outgassing products, morphology of the final chemical configurations, cyclic content, and mechanical properties.

polymer simulations, molecular dynamics↗
NASA NTRSDate not supplied

Predicting Char Yield of High-Temperature Resins

A simulation protocol is developed to predict the char yield of organic resins during high-temperature processing. Simulation protocol in silico methods can help screen promising new formulations for advanced materials, but previously no chemistry-sensitive technique existed to predict the important experimental value of char yield. The method utilizes a reactive force field (ReaxFF) to model the chemical transformation of precursor monomers into carbonized structures during three processing stages: ramp-up to processing temperatures (~3000 K), pyrolysis, and quenching. Achieving good agreement with experimental char yields requires continuous removal of small byproduct molecules to mimic outgassing, and the application of high pressure to eliminate porosity and encourage graphitization. More than ten different resin chemistries are investigated, including arylacetylenes, cyanate esters, phthalonitriles, and polyimides, representing a diverse group of precursors with respect to initial cyclic content, heteroatoms and reactive groups. The protocol correctly predicts the relative char yield between the investigated chemistries and provides quantitative agreement with experimental values, especially for high char yield resins. The properties of the resins during processing are compared, including outgassing products, morphology of the final chemical configurations, cyclic content and mechanical properties.

polymer simulations, molecular dynamics↗
NASA NTRSDate not supplied

Effect of Aromaticity on Soot Formation: A Reactive Molecular Dynamics Study

This study investigates the formation of soot from n-dodecane and its blend with m-xylene under pyrolytic and low-oxygen conditions with reactive molecular dynamics (MD) simulations. ReaxFF force field is used to simulate the interactions of fuel and oxygen molecules at engine-relevant conditions (2500-3500 K and 70-75 bar). Fuel molecules with carbon atom density of 0.03 g/cm 3 are dispersed into a cube and constant temperature simulations are carried out with a Nosé-Hoover thermostat. Pyrolysis of n-dodecane and the chemical pathway towards the formation of aromatic hydrocarbons are investigated. The initial pyrolysis rate of n-dodecane is observed to be slightly higher with the addition of aromatic compounds and oxygen. While the first aromatics formed from the decomposed n-dodecane are phenyl radicals at 2500 K, decomposition of the aliphatic fuel compound is observed to be necessary to build a carbon cluster, and eventually soot. Morphological properties of the created soot particles are also analyzed. The maturity, size and aromatics content of the soot particle are slightly affected with the addition of m-xylene and oxygen at 3500 K within the 3 ns simulation time possibly due the formation of larger and more condensed aromatic rings, resulting in larger soot molecules. The outcomes of this study provide important insights into the formation mechanism of soot and its morphological characteristics depending on varying fuel concentrations at pyrolysis and low oxygen engine conditions. Results of this analysis will further contribute to the understanding of contrail formation on generated soot particles originated from the combustion of different chemical components with particle chemistry matching companion experiments.

soot formation↗