Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rechargeable lithium batteries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Systematic Evaluation of Carbon Hosts for High-Energy Rechargeable Lithium-Metal Batteries

Rechargeable lithium batteries (RLBs) have attracted wide attention for achieving high energy and low cost, but the poor stability of the Li anode has remained as a large challenge. In the last several years, great efforts have been made to develop carbon anode structures for RLB applications. A wide range of carbon structures as well as many chemical modification strategies have been investigated to improve the Coulombic efficiency and extend the cycle life of the anodes or the cells. However, currently there is no clear conclusion on key factors that determine the performance of such the types of carbon structures due to the wide range of experimental conditions used in such studies. In this study, we systematically evaluated and compared the electrochemical properties of representative carbon anode materials as well as chemically functionalized carbon materials in different electrolytes. We have found that chemical functionalization, metallic loading, and the types of micro or nano-structures all have an effect on Li deposition/stripping process, but by far the most critical factor is the nature of the electrolytes. All carbon materials produced poor Coulombic efficiency and cycle life in conventional carbonate or ether-based electrolytes. However, when a Li metal compatible is used, the average Coulombic efficiency of Li metal deposition on all carbon structures is increased to 99% or higher. This study provides critical lessons on the directions for carbon anodes for RLBs. Based on these findings, we constructed Li metal coin cells using prelithiated hard carbon, LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode, and compatible electrolyte and tested the cells under conditions of lean electrolyte, lean Li metal and high cathode loading required for more than 300 Wh kg-1 specific energy. More than 200 stable cycles were demonstrated with over 80% capacity retention. Furthermore, the existing challenges and potential approaches have been discussed to further extend the cyclability of lithium-metal batteries under practical conditions.

Liu, Yao↗
NASA NTRS1990

Rechargeable lithium battery technology - A survey

The technology of the rechargeable lithium battery is discussed with special attention given to the types of rechargeable lithium cells and to their expected performance and advantages. Consideration is also given to the organic-electrolyte and polymeric-electrolyte cells and to molten salt lithium cells, as well as to technical issues, such as the cycle life, charge control, rate capability, cell size, and safety. The role of the rechargeable lithium cell in future NASA applications is discussed.

Halpert, Gerald↗
NASA NTRS1993

Design considerations for rechargeable lithium batteries

Viewgraphs of a discussion of design considerations for rechargable lithium batteries. The objective is to determine the influence of cell design parameters on the performance of Li-TiS2 cells. Topics covered include cell baseline design and testing, cell design and testing, cell design parameters studies, and cell cycling performance.

Shen, D. H.↗
DOE OSTI2020

Review on organosulfur materials for rechargeable lithium batteries

Organic electrode materials have been considered as promising candidates for the next generation rechargeable battery systems due to their high theoretical capacity, versatility, and environmentally friendly nature. Among them, organosulfur compounds have been receiving more attention in conjunction with the development of lithium-sulfur batteries. Usually, organosulfide electrodes can deliver relatively high theoretical capacity based on reversible breakage and formation of disulfide (S-S) bonds. Here, we provide an overview of organosulfur materials for rechargeable lithium batteries, including their molecular structural design, structure related electrochemical performance study as well as electrochemical performance optimization. In addition, recent progress of advanced characterization techniques for investigation of the structure and lithium storage mechanism of organosulfur electrodes are elaborated. To further understand the perspective application, additive effect of organosulfur compounds for lithium metal anodes, sulfur cathodes as well as high voltage inorganic cathode materials are reviewed with typical examples. Finally, some remaining challenges and perspective of the organosulfur compounds as lithium batteries components are also discussed. This review is intended to serve as a general guidance for researcher to facilitate the development of organosulfur compounds.

25 ENERGY STORAGE↗
DOE OSTI2020

A self-healing liquid metal anode with PEO-Based polymer electrolytes for rechargeable lithium batteries

In this study, a Ga-Sn liquid metal alloy material is demonstrated as a self-healing anode system due to its fluidity via operando synchrotron-based transmission X-ray microscopy and X-ray diffraction experiments. Cracks formed due to volume expansions can be recovered by the fluidity of the liquid metals. By incorporating with a poly(ethylene oxide) (PEO)-based electrolyte at 60°C, the Ga-Sn anode shows a reversible lithium insertion and extraction process with a high initial discharge specific capacity of 682 mAh g -1 , followed by delivering a capacity of 462 mAh g -1 in the second cycle at C/20 rate. Furthermore, compared with its solid counterparts, the Ga-Sn liquid metal anode demonstrates a better capability to maintain its mechanical integrity and better contact with PEO solid electrolytes due to its advantageous features of the liquid. This study suggests a potential strategy to use liquid metal alloys with polymer solid electrolyte to solve the anode challenges in rechargeable lithium batteries.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Symposium on Rechargeable Lithium Batteries, Hollywood, FL, Oct. 19-24, 1989, Proceedings

Recent advances in the technology and applications of rechargeable Li cells are discussed in reviews and reports. A general overview of the field is provided, and sections are devoted to organic electrolyte systems, polymeric electrolyte systems, inorganic electrolytes systems, and molten-salt electrolytes. Particular attention is given to electrolyte stabilization, the effects of organic additives on electrolyte performance, a cycle-life sensor, consumer-product applications, in situ measurements of gas evolution in Li secondary cells, ultrathin polymer cathodes, electrochemical growth of conducting polymers, and sealing Li/FeS(x) cells for a bipolar battery.

Subbarao, S.↗
NASA NTRS1990

The stabilization of electrolytes for rechargeable lithium batteries

Recent experimental studies of Li secondary cells are reviewed, focusing on (1) the novel anion lithium trifluoromethanesulfonyl imide (LTI) and (2) the use of KO2 and KOH additives to stabilize the electrolyte. Sample data are presented in tables and graphs and briefly characterized. The charging limits of LTI were found to compare favorably with those of LiAsFe6/THF and 2-MeTHF. Significant improvements were also obtained with the additives, but the results were erratic, with 2-3-fold variations among identical preparations. These differences are tentatively attributed to Li-film inhomogeneities and reactions of O2(-) with the solvent and impurities, especially in the cathode pores.

Dominey, L. A.↗
NASA NTRS1991

Analysis of redox additive-based overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection, has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. Digital simulation of the overcharge experiment leads to numerical representation of the potential transients, and estimate of the influence of diffusion coefficient and interelectrode distance on the transient attainment of the steady state during overcharge. The model has been experimentally verified using 1,1-prime-dimethyl ferrocene as a redox additive. The analysis of the experimental results in terms of the theory allows the calculation of the diffusion coefficient and the formal potential of the redox couple. The model and the theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗
NASA NTRS1990

The improvement of rechargeable lithium battery electrolyte performance with additives

The deliberate introduction of additives like 2-methylfuran (2-MeF) is known to improve Li cycleability in cyclic ether electrolytes. The authors found that the proclivity of 2-MeF to polymerize in the bulk electrolyte or on a TiS2 cathode was inhibited by the addition of reduced oxygen species, such as O2- and OH-. Additionally, the polymerization of tetrahydrofuran and dioxolane and the destructive processes initiated by AsF6- decomposition to AsF5 and AsF3 were inhibited by the introduction of reduced oxygen species, particularly OH- at the 10-ppm to 100-ppm level.

Dominey, L. A.↗
NASA NTRS1992

Long cycle life rechargeable lithium batteries

Cycle life and safety of delta-LiAl/TiS2 cells were evaluated using laboratory and AA-size cells. Analysis of the alloys (which contained 60, 70, 80, or 85 wt-pct. lithium and are designated 60 LiAl etc.) showed them to contain a mixture of elemental Li and Al4Li9. Cycling efficiencies correlated with the amount of free lithium in the anode. Using an electrolyte with the composition 48 v/o THF:48 v/o 2-MeTHF:4 v/o 2-MeF/LiAsF6(1.5M), a 70 LiAl/TiS2 laboratory cell yielded a cycling efficiency of 96.4 pct. when cycled at a 100 pct. discharge depth which compares well with Li anode cycling efficiencies of 96 to 97.5 pct. obtained previously in this electrolyte. The highest cycling efficiency of any delta-LiAl/TiS2 laboratory cell was 96.7 pct. when the 60 LiAl alloy was used with the 35 v/o PC:35 v/o EC:30 v/o triglyme/LiAsF6(1.0M) electrolyte. The 70 LiAl alloy was selected for further testing in AA cells since it was malleable for the fabrication of spirally wound electrodes, and its overall cycling performance was sufficiently good. AA-size 70 LiAl/TiS2 cells appear to have capacity/rate properties similar to those for identical Li/TiS2 cells. The use of the delta-LiAl alloy anodes does not appear to offer any safety advantage when cycled cells are shorted or heated.

Pasquariello, D. M.↗
NASA NTRS1989

Thermally stable electrolytes for rechargeable lithium batteries, phase 2

During the second year of research under NASA SBIR Contract NAS7-967, Covalent Associates and NASA contract monitors at the Jet Propulsion Laboratory agreed to perform an evaluation of the three best electrolytes developed during Phase 2. Due to the extensive period of time required to collect meaningful cycling data, we realized the study would extend well beyond the original formal end of the Phase 2 program (August 31, 1988). The substitution of this effort in lieu of an earlier proposed 20-cell final deliverable is formally documented in Modification No. 1 of Contract NAS7-967 as task 7. This Addendum contains the results of the cycling studies performed at Covalent Associates. In addition, sealed ampoules of each of these three electrolytes were delivered to the Jet Propulsion Laboratory Electrochemical Power Group. Their concurrent evaluation in a different test vehicle has also been recently concluded and their results are also summarized herein.

Dominey, L. A.↗
NASA NTRS1991

Finite linear diffusion model for design of overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. The model has been experimentally verified using 1,1-prime-dimethylferrocene as a redox additive. The theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗
NASA NTRS1993

Design concepts of high power bipolar rechargeable lithium battery

The present study shows that current bipolar Li/TiS2 batteries using a 0.38 mm thick TiS2 bipolar plate can yield moderate specific power and also high specific energy battery. The computer design studies project that a 100 V, 10 A h bipolar Li/TiS2 battery can achieve 150 W h/kg, 210 W h/l, and 150 W/kg. The unoptimized experimental bipolar Li/TiS2 batteries (3 cells, 90 mA h) exhibited 47 W h/kg, 90 W h/l, and 140 W/kg. Preliminary results on the cycleability of the bipolar batteries are demonstrated. The results also show that enhanced rate capability can be achieved by using pulse discharge and longer rest period between pulses.

Shen, David H.↗