Search NASA⌕ Search

SEARCH · Search NASA

Results for “Redox Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Iron redox behavior and oxygen reduction activity of Fe-N-C electrocatalysts in different electrolytes

The iron redox behavior and oxygen reduction reaction (ORR) activity of Fe-N-C ORR electrocatalysts synthesized by a variety of techniques were investigated as a function of the identity of the electrolyte anion (bisulfate/sulfate or perchlorate) at a constant pH. In situ X-ray absorption spectroscopy data support the assignment of the redox peaks in the voltammograms to the Fe 3+ /Fe 2+ redox couple. It was found that for a given Fe-N-C catalyst, there is a correlation between the Fe redox couple peak potential and the ORR activity in perchloric acid electrolyte, but not in sulfuric acid electrolyte. While a higher Fe redox couple potential (≥ 110 mV higher) was observed in perchloric acid electrolyte, a higher ORR activity was obtained in sulfuric acid electrolyte. Here, the higher ORR activity observed in sulfuric acid than perchloric acid was correlated with the higher peak current and larger faradaic charge for the Fe redox couple. A study of the Fe redox behavior using a cavity microelectrode, eliminating the impact of ionomer, showed that the interaction of H 2 SO 4 with Fe-N-C is stronger than that of HClO 4 and that Fe redox in both electrolytes is a reversible surface electrochemical reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Oscillatory redox behavior in oxides: Cyclic surface reconstruction and reactivity modulation via the Mars–van Krevelen mechanism

The breaking of translational symmetry at oxide surfaces gives rise to coordinatively unsaturated cations/anions and surface restructuring—key factors that govern surface reactivity. Using direct in situ environmental transmission electron microscopy (TEM) observations along with atomistic modeling, we report oscillatory redox behavior in CuO under H 2 , where cyclic surface reconstruction and reactivity modulation occur via the Mars–van Krevelen (MvK) mechanism. We observe self-switching between oxygen-rich and oxygen-deficient surface reconstructions, alternately activating and deactivating the surface for H 2 O formation. During periods of chemical inactivity, the oxygen-deficient surface undergoes slow reoxidation via lattice oxygen diffusing from subsurface and bulk reservoirs, restoring the active oxygen-rich surface termination. The inherent disparity in chemical activity among undercoordinated surface ions, along with sluggish subsurface-to-surface oxygen replenishment, drives this oscillatory redox cycle, modulating H2-induced loss of lattice oxygen at the surface and its delayed replenishment from the subsurface. This creates spatiotemporally separated redox steps at the oxide surface. The phenomena and atomistic insights presented here have significant implications for manipulating the surface reactivity of oxides by tuning the separation of these redox steps.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ion-Electron Coupling-Driven Redox Behavior in Metal–Organic Frameworks

Redox-active metal–organic frameworks (MOFs) have long been proposed as electronic transport platforms, yet the microscopic origin of their conductivity remains debated. A theoretical demonstration reveals charge transport in a Zn(pyrazole–naphthalene diimide (NDI)) MOF arising not from delocalized band-like states but from redox hopping between discrete linker sites. Using ab initio molecular dynamics simulations combined with electronic structure analysis, we established a direct link among electron injection, structural reorganization, and transport. Electron accumulation proceeds sequentially and site-selectively from imide and carbonyl groups of the NDI core progressively involving pyrazole N atoms at higher reduction states, through a hierarchy of redox-active sites. In contrast, Zn nodes remain essentially redox-inactive, which confirms their structural role. Density-of-states analysis corroborates a transport regime dominated by linker-centered states with evolving p-character upon reduction, resulting in dynamically reconfigured conduction networks. Real-time trajectories reveal anisotropic linker-to-linker electron transfer modulated by counterion coordination. This cooperative ion–electron regime emerges from potential energy surface collapse into a single low-barrier transition (ΔG ‡ ≈ 45 meV), where ionic and electronic motions evolve adiabatically on the same free-energy landscape. Elucidating redox conductivity in Zn(pyrazole–NDI) MOFs provides a theoretical framework for use in neuromorphic computing and related technologies.

Charge transfer↗
DOE OSTI2020

Structural Stabilization of P2-type Sodium Iron Manganese Oxides by Electrochemically Inactive Mg Substitution: Insights of Redox Behavior and Voltage Decay

Layered P2-type Na 0.8 Mn 0.5 Fe 0.5 O 2 cathode material is a promising candidate for next-generation sodium-ion batteries due to the economical and environmentally benign characteristics of Mn and Fe. The poor cycling stability of the material, however, is still a problem that must be solved. To address the problem, here, electrochemically inactive Mg 2+ was introduced into the structure by substituting some of the Fe ions. It was shown that Mg substitution led to a smoother voltage profile with improved cycling performance and rate capability. These observations were attributed to the suppressed structural changes during electrochemical processes. Detailed redox mechanisms, associated local structural changes, and phase transitions were investigated by X-ray absorption spectroscopy and X-ray diffraction. From the detailed analysis of electrochemical behaviors, it was also identified how the redox reactions and structural disordering occurred in the high-and low-voltage regions and how Mg substitution stabilized the structure.

25 ENERGY STORAGE↗
DOE OSTI2023

Assessment of Bulk Oxygen Capacity and Transient Redox Behavior of Foamed Lanthanum Strontium Manganese Perovskites

Synthesis of solar thermochemical hydrogen (STCH) production redox materials with engineered structures, for example, replica foams, can enable efficient heat and mass transport and are critical for scaled-up systems. Prior work has motivated the use of lanthanum strontium manganese (LSM)-type perovskites as foamed STCH materials, but the effect of their morphology on bulk and kinetic behavior has not been reported. In this work, replica and direct foamed samples of La 0.65 Sr 0.35 MnO 3-δ (LSM35) were fabricated and compared to synthesized powders and dense monoliths, and similarly synthesized CeO 2-δ (ceria) foams, regarding their specific reaction rates and bulk oxygen capacity/H 2 yields. Changes in oxygen capacity (Δδ) and reaction rates were measured between 1200 °C and 1400 °C by using fixed ratios of steam and hydrogen during both reduction and oxidation steps, allowing for analysis under practical high conversion conditions. Results suggest bulk behavior and reaction rates of the foamed LSM materials are comparable to their powder analogues. Differences in reaction rates were observed only when replica foamed samples were subjected to rapid laser heating (emulating conditions expected in solar furnaces), which is expected but has not been demonstrated at such a small scale. Here, foamed samples were further subjected to 50 redox cycles at 1400 °C to evaluate their stability. Results show no statistically significant decrease in hydrogen production for any of the foamed samples, but the direct foamed samples became brittle with time. Together, these results demonstrate the viability of replica foamed LSM perovskites for integration in scaled-up STCH systems.

08 HYDROGEN↗
DOE OSTI2025

Conformational Control as a Design Strategy to Tune the Redox Behavior of Benzotriazole Negolytes for Nonaqueous Flow Batteries

Here, we present a molecular engineering strategy to tune the reduction potentials of benzotriazole derivatives as high-energy-density negolytes in nonaqueous redox flow batteries. Within nonaqueous electrolytes, these derivatives, notably 2-(o-tolyl)-2H-benzo[d][1,2,3]triazole (1), demonstrate a theoretical capacity of up to 93.8 Ah L⁻¹ and a reduction potential of –2.35 V vs ferrocene/ferrocenium (Fc/Fc⁺). Introducing dimethyl substitution (i.e., 2-(2,6-dimethylphenyl)-2H-benzo[d][1,2,3]triazole (4)) shifts the reduction potential even more negatively to –2.55 V vs Fc/Fc⁺. We ascribe the nonlinear effect of dimethyl substitution on reduction potential to ground-state conformational effects. Flow battery tests with negolyte 1 and ferrocene posolyte demonstrated >90% Coulombic efficiency at 6.7 mA cm⁻² with improved cyclability in the presence of lithium bis(trifluoromethylsuylfonyl)imide supporting salt.

25 ENERGY STORAGE↗
DOE OSTI2020

Redox Behaviors in Li-Excess Cation-Disordered Mn-Nb-O-F Rocksalt Cathode

Lithium-excess cation-disordered rocksalt oxide (DRX) is a new choice of high energy Li-ion cathode materials. DRX cathode can deliver an exceptionally high capacity of >250 mAh/g, implying the participation of cationic transition metal and anionic oxygen redox in the electrochemistry. Understanding the explicit roles of both redox reactions in the newly developed cathode is of critical importance to further development of these materials. Herein, we synthesize a representative Mn-redox-based fluorinated DRX material, Li1.2Mn0.625Nb0.175O1.95F0.05 (LMNOF). Using a comprehensive suite of electroanalytical methods, we probe the cationic and anionic redox processes and their evolution upon cycling exclusively from the electrochemical point of view. This work sheds light on understanding of cationic and anionic redox and their roles in the capacity loss for high-capacity fluorinated DRX cathode, meanwhile, showcases an explicit approach to study the electrochemistry of novel electrode materials using such non-disruptive electroanalytical methods.

Li-ion battery, high-capacity cathode, Li-excess m↗
DOE OSTI2023

Temporal Ni K-Edge X-ray Absorption Spectroscopy Study Reveals the Kinetics of the Ni Redox Behavior of the Iron-Nickel Oxide Bimetallic OER Catalyst

Operando X-ray absorption spectroscopy (XAS) can be utilized to probe the phase and structural changes of FeNiOx and similar transition metal oxide electrocatalysts during electrocatalytic reactions. However, capturing the temporal changes occurring in the operando chemistry of electrocatalysts has been little studied. Here, in this work, we successfully capture the time-resolved changes at the Ni K-edge for both the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) regions of an aqueous phase synthesized FeNiO x bimetallic nanoparticle electrocatalyst. During a stepped voltage experiment, the temporal change in the Ni K-edge was observed as the applied voltage was stepped from 0.7 to 0.8 V versus the silver/silver chloride reference electrode, and the change observed is associated with the Ni redox transition from the 2+ to 3+/4+ oxidation state. Individual XAS spectra were obtained in 90 s, and a total of 9 scans post voltage step showed a unique transition from a hydroxide to an oxyhydroxide phase. The shift in absorption edge energy position and the changes in spectral shape for individual scans explain the typically observed broadening of the Ni K-edge XANES spectrum during time-averaged operando XAS, and a kinetic analysis revealed a first-order observed rate constant, |k obs |, of 0.00426 s –1 and a half-life (t 1/2 ) of 163 s. Multivariate curve resolution-alternating least squares analysis followed by linear combination fitting analysis for time-averaged versus time-resolved Ni K-edge changes upon voltage step show distinct differences in estimated contributions from Ni 2+ oxide/hydroxide phases. Detailed EXAFS modeling shows the phase transition from hydroxide to oxyhydroxide on top of the unchanged metallic core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Elucidating the Redox Behavior during Atomic Layer Deposition on Lithium-Ion Battery Cathode Materials

Atomic layer deposition (ALD) has emerged as a promising technology for applying ultrathin protective coatings on lithium-ion battery (LIB) cathode surfaces to improve their cycling stability. While there have been numerous reports evaluating the electrochemical performance of these surface-modified cathode materials, the chemical changes induced on the surface of the cathode materials upon ALD coating are not fully studied. This paper describes a systematic investigation to understand the interfacial changes of 12 different cathode materials upon coating with aluminum oxide (Al 2 O 3 ) using trimethyl aluminum (TMA) and H 2 O, and aluminum fluoride (AlF 3 ) using TMA and hydrogen fluoride pyridine (HFPy). Here, the surface composition of these cathode materials, which range from simple transition metal oxides (e.g. NiO and MnO) to complex multi-element cathode materials (e.g. LiNi x Mn 1-x-y Co y O 2 , NMC), was studied via X-ray photoelectron spectroscopy (XPS). The XPS measurements reveal that the transition metals in the cathode materials undergo selective oxidation/reduction depending upon the nature of the precursor, the coating, and the cathode material. The ability to chemically modify the surface of cathode materials via vapor-phase precursor adsorption will open new avenues to systematically control the interface of the cathode materials in LIBs that are not possible by conventional coating methods.

25 ENERGY STORAGE↗
DOE OSTI2020

Impacts of hydrogen bonding interactions with Np(v/vi)O 2 Cl 4 complexes: vibrational spectroscopy, redox behavior, and computational analysis

The neptunyl (Np(V)O 2 + /Np(VI)O 2 2+ ) cation is the dominant form of 237 Np in acidic aqueous solutions and the stability of the Np(V) and Np(VI) species is driven by the specific chemical constituents present in the system. Hydrogen bonding with the oxo group may impact the stability of these species, but there is limited understanding of how these intermolecular interactions influence the behavior of both solution and solid-state species. In the current study, we systematically evaluate the interactions between the neptunyl tetrachloride species and hydrogen donors in coordination complexes and in the related aqueous solutions. Both Np(V) compounds (N 2 C 4 H 12 ) 2 [Np(V)O 2 Cl 4 ]Cl (Np(V)pipz) and (NOC 4 H 10 ) 3 [Np(V)O 2 Cl 4 ] (Np(V)morph) exhibit directional hydrogen bonding to the neptunyl oxo group while Np(VI) compounds (NC 5 H 6 ) 2 [Np(VI)O 2 Cl 4 ] (Np(VI)pyr) and (NOC 4 H 10 ) 4 [Np(VI)O 2 Cl 4 ]·2Cl (Np(VI)morph) assemble via halogen interactions. Here, the Raman spectra of the solid-state phases indicate the activation of vibrational bands when there is asymmetry of the neptunyl bond, while these spectral features are not observed within the related solution phase spectra. Density functional theory calculations of the Np(V)pipz system suggest that activation of the ν 3 asymmetric stretch and other combination modes lead to additional complexity within the solid-state spectra. Electrochemical analyses of complexes in the solution phases are consistent with the results of the crystallization experiments as the voltammetric potentials of Np(V)/Np(VI) complexes in the presence of protonated heterocycles differ from the potentials of pure Np(V) and may correlate with the hydrogen bonding interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Impact of intermolecular interactions on the spectroscopic signals, energetics, and redox behavior of high valent 237 Np (Final Report)

Our studies have led to definitive spectral assignments for neptunyl-neptunyl interactions in aqueous solutions that will be valuable for predicting Np(V) speciation in solution. We have definitively demonstrated how actinyl-hydrogen and actinyl-cation interactions can influence spectral features for uranyl and neptunyl system. In addition, we have developed DFT methodologies to predict enthalpies of formation for uranyl and neptunyl systems and linked stability to chemical descriptors (hydrogen interaction energies or the electrostatic attraction energies). The counterion influenced the rate of Np(V) oxidation to Np(VI) neptunates and [Np(VII)O 4 OH] 3- complexes. Oxidation to Np(VII) during ozonolysis takes place through the presence of hydroxyl radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Understanding Redox Organic Behavior in Deep Eutectic Solvents: Considerations for Molecular Design

Electrolytes based on deep eutectic solvents (DESs) coupled with redox active organic molecules have shown potential as a versatile and energy dense electrochemical energy storage system. However, progress in these systems has been held back by a lack of understanding of the irregular behavior displayed when redox active organic molecules are transitioned from other solvent systems. In this work, the hydrogen bonding characteristics of a series of redox organic molecules were investigated through infrared spectroscopy and molecular modeling. New understanding of these interactions was then used to explain their electrochemical behavior in a DES electrolyte. A model was used to predict the behavior of new derivatives towards the design of an optimized redox organic-DES system. Hydrogen bonding between the redox molecules and the solvent was found to significantly shift the potential of a redox reaction more positive when a hydrogen bond forms at the redox active site. It was predicted that functionalizing a molecule with electron withdrawing groups to lower the electron density of the redox active functional group lowers the strength of the hydrogen bond and thus alleviates the undesirable potential shift. This hypothesis was demonstrated by the addition of nitro groups to fluorenones.

25 ENERGY STORAGE↗
DOE OSTI2025

Stability of Mn-Doped TiO 2 Thin-Film Anodes during Water Oxidation Reactions

Incorporating manganese atoms into TiO 2 has been shown to improve its activity for water oxidation. However, its activity has been observed to steadily degrade under constant applied potential, especially at more oxidizing applied potentials. Here, the compositional profile and electrochemical stability of Mn-doped TiO 2 (Mn:TiO 2 ) thin-film electrodes precisely fabricated by atomic layer deposition (ALD) were evaluated to elucidate the mechanisms of electrode degradation. Although ALD enables the deposition of Mn dopants throughout the film thickness, only Mn within 1.5 nm of the surface was observed to be redox active. Annealing Mn:TiO 2 films in air leads to the diffusion of Mn toward the electrode surface and oxidation of the Mn and alters the redox behavior. Annealing endows greater stability to Mn redox behavior but does not fully stabilize the water oxidation current, suggesting that the two electrochemical processes are not precisely correlated. In situ inductively coupled plasma mass spectrometry reveals that Mn is lost from Mn:TiO 2 films at potentials greater than 1.8 V vs RHE. However, the initial Mn loss is equivalent to less than a single ALD layer of MnO x . Longer-term constant potential experiments suggest that Mn is lost from up to 1 nm of the electrode surface but that this loss may account for only a portion of the diminished water oxidation activity.

atomic layer deposition↗
DOE OSTI2025

Electrochemical Behavior of Cerium at an Indium Tin-Doped Oxide Electrode in Acidic Media

The redox behavior and speciation of cerium at mesoporous thin films composed of nanoparticles of indium tin-doped oxide (nITO) electrodes were characterized in pH 4.8, 0.1 M acetate buffer and both 0.1 and 1 M HNO 3 using electrochemical techniques and X-ray photoelectron spectroscopy. Anodic deposition of ceria species from Ce(III) to the nITO electrode was achieved under all solvent conditions via spontaneous condensation of electrochemically generated ceric hydroxide species. In 1 M nitric acid, the rate of CeO 2 dissolution is on the same order as CeO 2 deposition, resulting in negligible amounts of CeO 2 electrodeposited at the nITO surface. The cathodic stripping of CeO 2 from the nITO substrate deposited in 0.1 M nitric acid or pH 4.8 acetate buffer follows a 2-step process where Ce(IV)-oxide is initially reduced to an unstable Ce(III)-oxide species that rapidly undergoes acid catalyzed dissolution to yield soluble Ce(III) (aq) . These findings provide a foundation for the pH and anodic potential controlled deposition of CeO 2 thin films to ITO substrates, which can aid in the development of materials composed of ceria. As a result, they can also be used to infer likely analogous actinide redox behavior and speciation at these electrodes.

Cerium↗
DOE OSTI2023

Advancing radioactive material research method: the development of a novel in situ particle-attached microfluidic electrochemical cell

This study aims to develop a microgram-scale microfluidic electrochemical cell (E-cell) for investigating the redox behavior of uranium oxide (UO 2 ). The traditional bulk electrochemical methods may require shielded facilities to investigate the hazardous materials, e.g., spent nuclear fuel, due to high radiation levels. Microfluidic E-cells offer advantages such as reduced radiation exposure, control over fluid flow rates, and high-throughput capabilities. Methods: The design of the E-cell considers electrode morphology, adhesion to a thin membrane, electrode configuration, and vacuum compatibility. Three techniques, including FIB-SEM lift-out, Au coating, and polyvinylidene fluoride (PVDF) binder, are explored for fabricating and attaching microgram quantities of UO 2 as working electrodes. The PVDF binder method proves to be the most effective, enabling the creation of a vacuum-compatible microfluidic E-cell. Results and discussion: The PVDF binder method demonstrates successful electrochemical responses and allows for real-time monitoring of UO 2 electrode behavior at the microscale. It offers chemical imaging capabilities using in situ SEM/EDS analysis. The technique provides consistent redox outcomes similar to bulk electrochemical analysis. Conclusion: The development of a microgram-scale microfluidic electrochemical cell using the PVDF binder technique enables the investigation of UO 2 redox behavior. It offers a low-risk approach with reduced radiation exposure and high-throughput capabilities. The technique provides real-time monitoring and chemical imaging capabilities, making it valuable for studying spent nuclear fuel systems and material characterization.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Harnessing Redox-Active Molecules in Alkylammonium Halide-Based Eutectic Solvents for Redox Flow Batteries

Redox flow batteries (RFBs) are promising for large-scale energy storage, however, advancements in performance and cost-effectiveness are critical factors for adoption. Here we report on alkylammonium halide based eutectic solvents (ESs) and found that a ESs comprising of diethylammonium chloride or bromide, in ethylene glycol demonstrated exceptional stability and a wide electrochemical stability window, making it a promising candidate for RFB applications. The electrochemical stability and redox behavior of the alkylammonium halide-based ESs are significantly influenced by hydrogen-bonding interactions, modulated by the alkyl chain length of the cation and the nature of the anion. A redox-active eutectic electrolyte containing 0.45 M methyl viologen dichloride (MV 2+ ) paired with acetylferrocene exhibited reversible redox behavior with a maximum open-circuit voltage of ∼1.34 V. The first redox couple, representing the viologen dication to radical cation transition, exhibited remarkable stability with consistent performance, achieving an energy efficiency near 70% at charge-discharge current densities of 10 mA cm −2 over 160 cycles with about 3% loss of the initial capacity. This study highlights the potential of alkylammonium halide DES systems for implementing eutectic-based RFB technologies in the future.

25 ENERGY STORAGE↗