Search NASA⌕ Search

SEARCH · Search NASA

Results for “Resistance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nm-scale electrical resistance imaging on CdTe by scanning spreading resistance microscopy

Local resistance imaging can provide information on nm-scale carrier distribution in semiconductor devices. Scanning spreading resistance microscopy (SSRM), an atomic force microscopy-based nm-scale resistance mapping technique, has been developed for carrier delineation in Si microdevices. We report on the development and validation of SSRM on CdTe materials, by testing on molecular beam epitaxy (MBE) grown CdTe films. The probe/CdTe contact resistance was suppressed sufficiently below sample's spreading resistance by pressing the probe into the sample with ∼mN contact force and applying a large sample/probe forward bias voltage (V s ), which was understood by analyzing current-voltage (I-V) involving a serially connected insulating top layer with underlying spreading resistance. The carrier concentration as deduced from the resistance measurement, using a single mobility value, is consistent with Hall measurement with a standard deviation of 14% based on a set of MBE films with carrier concentrations in the range of 10 15 –10 16 /cm 3 . The doping polarity was readily identified by flipping V s polarity, where the resistance with reverse V s is orders of magnitude larger than forward V s . While focusing on the SSRM technique validation, we also show an example on an As-doped Cd(Se,Te) polycrystalline thin film of a high-performance CdTe solar cell, which illustrates the local resistance nonuniformity with up to two orders of magnitude differences, indicating if local mobility is roughly constant, local carrier concentration can have significant nonuniformity.

14 SOLAR ENERGY↗
DOE OSTI2023

Distribution of Antibiotic Resistance in a Mixed-Use Watershed and the Impact of Wastewater Treatment Plants on Antibiotic Resistance in Surface Water

The aquatic environment has been recognized as a source of antibiotic resistance (AR) that factors into the One Health approach to combat AR. To provide much needed data on AR in the environment, a comprehensive survey of antibiotic-resistant bacteria (ARB), antibiotic resistance genes (ARGs), and antibiotic residues was conducted in a mixed-use watershed and wastewater treatment plants (WWTPs) within the watershed to evaluate these contaminants in surface water. A culture-based approach was used to determine prevalence and diversity of ARB in surface water. Low levels of AR Salmonella (9.6%) and Escherichia coli (6.5%) were detected, while all Enterococcus were resistant to at least one tested antibiotic. Fewer than 20% of extended-spectrum β-lactamase (ESBL)-producing Enterobacteriaceae (17.3%) and carbapenem-resistant Enterobacteriaceae (CRE) (7.7%) were recovered. Six ARGs were detected using qPCR, primarily the erythromycin-resistance gene, ermB. Of the 26 antibiotics measured, almost all water samples (98.7%) had detectable levels of antibiotics. Analysis of wastewater samples from three WWTPs showed that WWTPs did not completely remove AR contaminants. ARGs and antibiotics were detected in all the WWTP effluent discharges, indicating that WWTPs are the source of AR contaminants in receiving water. However, no significant difference in ARGs and antibiotics between the upstream and downstream water suggests that there are other sources of AR contamination. The widespread occurrence and abundance of medically important antibiotics, bacteria resistant to antibiotics used for human and veterinary purposes, and the genes associated with resistance to these antibiotics, may potentially pose risks to the local populations exposed to these water sources.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Colistin resistance plasmids dually enhance bacterial virulence and antibiotic resistance via surface polysaccharide biosynthesis

Plasmids carrying the mobilized colistin-resistance gene mcr-1 are prevalent among multidrug-resistant Gram-negative pathogens, yet their broad impact on bacterial physiology and virulence remains unclear. Here, we demonstrate that acquisition of an mcr-1 plasmid concurrently increases antimicrobial resistance and pathogenicity in Escherichia coli. On the same plasmid, the XRE-family transcriptional regulator EcaR cooperates with MCR-1 to activate the wec operon, driving biosynthesis of two surface polysaccharides: enterobacterial common antigen (ECA) and a high-molecular-weight O-chain. Expression of these surface polysaccharides increases bile resistance and virulence in a murine model and further elevates colistin resistance. MCR-1 enhances transcription of upstream genes in the wec operon, whereas EcaR directly activates an internal promoter (PwecE) to induce downstream gene expression. Thus, both components are required for surface polysaccharide expression, and deletion of either abolishes the phenotype. Genomic analysis of publicly available mcr plasmids reveals widespread co-occurrence of mcr-1 and ecaR on IncI2 and IncX4 plasmids, indicating their functional complementarity. These findings uncover a mechanism by which resistance plasmids remodel the bacterial surface, linking horizontal gene transfer to coordinated regulation of antimicrobial resistance and virulence.

Antimicrobial resistance↗
DOE OSTI2025

Identifying rolling resistance and air resistance simultaneously for an electric truck

Accurately estimating rolling and air resistance is essential for predicting the energy consumption of vehicles. This study presents a field-based approach using a rolldown test to simultaneously determine rolling and air resistance coefficients. Unlike prior methods that frequently used simulations or models, we employ a goal programming methodology to improve precision and evaluate the actual vehicle and environmental conditions. Our methodology was tested using a Class 8 Freightliner eCascadia on a surveyed road section, ensuring controlled conditions for data collection. By analyzing the time–velocity relationship across multiple test runs, we derived resistance coefficients for both loaded and unloaded conditions. The study confirms that rolling resistance is largely independent of velocity at low speeds but exhibits a nonlinear dependency at higher speeds. Additionally, road surface conditions, tire condition, axle configuration, aerodynamic properties, and weather conditions significantly impact resistance values, emphasizing the need for real-world testing rather than relying solely on standardized projections. Our results align with existing literature while demonstrating the efficacy of the goal programming approach in refining resistance estimates. This work contributes to improved vehicle energy modeling, offering practical insights for fleet operators and policymakers seeking accurate energy consumption predictions for electric trucks operating under varying environmental conditions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Microbiological quality, antibiotic resistant bacteria and relevant resistance genes in ready-to-eat Pacific oysters ( Magallana gigas )

Abstract Oysters are a highly valued seafood but can endanger public health, if they are eaten raw or barely cooked. We evaluated the microbiological quality of Pacific oysters (Magallana gigas) by international standard methods in four groups (each with four to five animals) acquired from supermarkets and directly from a farm producer. Most of the groups presented satisfactory microbiological quality. In two groups of oysters, ‘questionable’ or ‘unsatisfactory’ quality was observed for the coagulase-positive Staphylococcus parameter. Culture-based methods did not detect Salmonella spp. or enteropathogenic Vibrio spp., but Vibrio alginolyticus, a potential foodborne pathogen, was identified by molecular analysis. Fifty strains, belonging to 19 species, were isolated in antibiotic-supplemented media, and their antibiotic susceptibility profile was evaluated. Genes coding for β-lactamases were searched by PCR in bacteria showing resistance phenotype. Decreased susceptibility or resistance to distinct antibiotics were observed for bacteria from depurated and non-depurated oysters. The blaTEM gene was identified in Escherichia fergusonii and Shigella dysenteriae strains, which showed multidrug-resistant phenotypes. The possibility that oysters might be a source of antibiotic-resistant bacteria/antibiotic resistance genes is of great concern and highlights the need for stricter controls and preventative measures to mitigate and counteract the dissemination of antibiotic resistance across the food chain.

Guedes, Bárbara (ORCID:0000000260424898)↗
DOE OSTI2023

Mechanisms of HIV-1 integrase resistance to dolutegravir and potent inhibition of drug-resistant variants

HIV-1 infection depends on the integration of viral DNA into host chromatin. Integration is mediated by the viral enzyme integrase and is blocked by integrase strand transfer inhibitors (INSTIs), first-line antiretroviral therapeutics widely used in the clinic. Resistance to even the best INSTIs is a problem, and the mechanisms of resistance are poorly understood. Here, we analyze combinations of the mutations E138K, G140A/S, and Q148H/K/R, which confer resistance to INSTIs. The investigational drug 4d more effectively inhibited the mutants compared with the approved drug Dolutegravir (DTG). We present 11 new cryo-EM structures of drug-resistant HIV-1 intasomes bound to DTG or 4d, with better than 3-Å resolution. These structures, complemented with free energy simulations, virology, and enzymology, explain the mechanisms of DTG resistance involving E138K + G140A/S + Q148H/K/R and show why 4d maintains potency better than DTG. These data establish a foundation for further development of INSTIs that potently inhibit resistant forms in integrase.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

In vitro selection and analysis of SARS-CoV-2 nirmatrelvir resistance mutations contributing to clinical virus resistance surveillance

To facilitate the detection and management of potential clinical antiviral resistance, in vitro selection of drug-resistant severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) against the virus M pro inhibitor nirmatrelvir (Paxlovid active component) was conducted. Six M pro mutation patterns containing T304I alone or in combination with T21I, L50F, T135I, S144A, or A173V emerged, with A173V+T304I and T21I+S144A+T304I mutations showing >20-fold resistance each. Biochemical analyses indicated inhibition constant shifts aligned to antiviral results, with S144A and A173V each markedly reducing nirmatrelvir inhibition and M pro activity. SARS-CoV-2 surveillance revealed that in vitro resistance–associated mutations from our studies and those reported in the literature were rarely detected in the Global Initiative on Sharing All Influenza Data database. In the Paxlovid Evaluation of Protease Inhibition for COVID-19 in High-Risk Patients trial, E166V was the only emergent resistance mutation, observed in three Paxlovid-treated patients, none of whom experienced COVID-19–related hospitalization or death.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Resistance to oxyimino-cephalosporins conferred by an alternative mechanism of hydrolysis by the Acinetobacter -derived cephalosporinase-33 (ADC-33), a class C β-lactamase present in carbapenem-resistant Acinetobacter baumannii (CR Ab )

ABSTRACT Antimicrobial resistance inAcinetobacter baumanniiis partly mediated by chromosomal class C β-lactamases, theAcinetobacter-derived cephalosporinases (ADCs). Recently, a growing number of emerging variants were described, expanding this threat. Consistent with other β-lactamases, one of the main areas of variance exists in the Ω-loop region near the site of cephalosporin binding. Interestingly, a common alanine duplication (Adup) is found in this region. Herein, we studied specific Adup variants expressed in a uniformEscherichia coligenetic background that demonstrated high-level resistance to multiple oxyimino-cephalosporins. For ceftolozane and ceftazidime, the Adup ADCs significantly increased levels of resistance (minimum inhibitory concentration [MIC] ≥ 512 µg/mL and MIC ≥ 1,024 µg/mL, respectively). These observations were consistent with the increasedk cat /K M for ceftazidime. For cefiderocol, three Adup variants exhibited increased MICs and increasedk cat /K M for this compound. Timed electrospray ionization mass spectrometry demonstrated stable cephalosporin:ADC adducts with ADC-30 (non-Adup), but not with ADC-33 (Adup), consistent with turnover. The X-ray crystal structure of Adup variant ADC-33 in complex with ceftazidime was determined (1.57 Å resolution) and suggests that increased turnover is facilitated by conformational changes (shift in Tyr221 and orientation of the oxyimino portion of the R1 side chain) and repositioning of water in the active site. These changes appear to favor substrate-assisted catalysis as an alternative mechanism to base-assisted catalysis. These studies also provide unprecedented insight into the mechanism underlying oxyimino-cephalosporin hydrolysis by expanded-spectrum ADC β-lactamases and possibly other class C β-lactamases, which is of critical importance to future drug design. IMPORTANCE The characterization of emergingAcinetobacter-derived cephalosporinase (ADC) variants is necessary to understand the increasing resistance to β-lactam antibiotics inAcinetobacterspp. In this study, cefiderocol retains effectiveness against ADC variants with and without an Ω-loop alanine duplication (Adup). However, the presence of the Adup appears to introduce loop flexibility and structural alterations resulting in increased resistance and steady-state turnover of larger cephalosporins. Further characterization provides unprecedented insight into the mechanism of cephalosporin hydrolysis by ADC β-lactamases and supports a concomitant increase in ADC structural flexibility and cephalosporin affinity that leads to more efficient hydrolysis. In addition, the crystal structure of ADC-33 in complex with ceftazidime is consistent with a substrate-assisted catalysis mechanism. The structural differences in the ADC-33 active site leading to ceftazidime catalysis provide a better understanding of β-lactamase Adup variants and open important opportunities for future drug design and development.

Microbiology↗
DOE OSTI2024

High-resolution chemical patterns from negative tone resists for the integration of extreme ultraviolet patterns of metal-oxide resists with directed self-assembly of block copolymers

Extreme ultraviolet (EUV) lithography faces significant challenges in designing suitable resist materials that can provide adequate precision, while maintaining economically viable throughput. These challenges in resist materials have led to printing failures and high roughness in EUV patterns, compromising the performance of semiconductor devices. Integrating directed self-assembly (DSA) of block copolymers (BCPs) with EUV lithography offers a promising solution because, while the BCPs register to the EUV-defined chemical guiding pattern, the thermodynamically determined structures of the BCPs automatically rectify defects and roughness in the EUV pattern. Despite the superior resolution of metal-oxide EUV resists (MORs), their application to DSA is limited by the difficulty in converting them into chemical patterns that allow effective transfer of the rectified patterns of DSA films into inorganic materials. To address this challenge, this study introduces a novel strategy for fabricating chemical patterns using hydrogen silsesquioxane (HSQ), a high-resolution negative tone inorganic resist, as a model system for MORs. Initially, a sacrificial Cr pattern is generated from HSQ patterns via reactive ion etching. The sacrificial Cr pattern is converted into a chemical pattern by first grafting a water-soluble polyethylene oxide brush onto the substrate, then wet etching the Cr, and finally grafting nonpolar polystyrene brushes. Assembling polystyrene-block-poly(methyl methacrylate) on these patterns results in structures oriented and registered with the underlying pattern, achieving 24 nm full-pitch resolutions. In conclusion, this approach has the potential to integrate MOR patterns into the DSA process, thereby enabling the generation of high-quality sub-10 nm patterns with high-χ BCPs.

Atomic force microscopy↗
DOE OSTI2024

High-temperature quantum valley Hall effect with quantized resistance and a topological switch

Edge states of a topological insulator can be used to explore fundamental science emerging at the interface of low dimensionality and topology. Achieving a robust conductance quantization, however, has proven challenging for helical edge states. In this work, we show wide resistance plateaus in kink states—a manifestation of the quantum valley Hall effect in Bernal bilayer graphene—quantized to the predicted value at zero magnetic field. The plateau resistance has a very weak temperature dependence up to 50 kelvin and is flat within a dc bias window of tens of millivolts. We demonstrate the electrical operation of a topology-controlled switch with an on/off ratio of 200. These results demonstrate the robustness and tunability of the kink states and its promise in constructing electron quantum optics devices.

Science & Technology - Other Topics↗
DOE OSTI2025

Methods of improving drought and salt resistance in a plant and genetically engineered plants with improved drought and salt resistance

The present disclosure provides methods for increasing drought resistance, salt resistance, and biomass production of a plant. The methods encompass expression of DiGeorge-Syndrome Critical Region 14 (DGCR14) gene in the plant. In comparison to a plant not manipulated in this manner, the disclosed, genetically-modified, plants display improved drought resistance and salt resistance. Also provided are plants that can be obtained by the method according to the invention, and nucleic acid vectors to be used in the described methods.

Xie, Meng↗
DOE OSTI2023

An Aerosol Jet Printed Resistance Temperature Detector‐Micro Hotplate with Temperature Coefficient of Resistance Stabilized by Electrical Sintering

Abstract Aerosol jet printing (AJP) is an emerging direct write tool enabling rapid prototyping and fabrication of electronics components. AJP provides faster and less expensive production of devices with feature sizes of >10 microns compared to traditional MEMS processes. Herein, the fabrication of a resistance temperature detector‐micro hotplate (RTD‐µHP) is reported using AJP printed silver. AJP eliminates sophisticated MEMS processes such as masking, alignment, and etching. The compatibility of the AJP process with a broad range of materials is demonstrated by printing highly resolved lines on rigid and flexible substrates. Optimal thermal sintering conditions of AJP printed silver (Ag) lines are found by in situ resistance measurements. To stabilize the temperature coefficient of resistance (TCR) of the RTD‐µHP at high operating current levels, electrical sintering is performed on the RTD‐µHPs. Electrical sintering improves the conductivity of fully thermally sintered Ag RTD‐µHPs by 32% and provides a burn‐in mechanism for stabilizing the TCR. The TCR of the RTD‐µHPs after electrical sintering is 3.80 × 10 −3 at 22 °C, close to the value for bulk Ag. The performance of the RTD‐µHPs is tested using a reference thermocouple. The RTD‐µHPs show reliable and repeatable heating and temperature sensing up to 70 °C in air.

Sui, Yongkun↗
DOE OSTI2024

On anomalous transport of multi-species plasma associated with the resistive ballooning and resistive drift waves driven turbulence

Anomalous transport of multi-species plasma related to the resistive ballooning and resistive drift wave turbulence is considered in a “cold” ion approximation. It is found that similar to the resistive drift wave turbulence [see A. R. Knyazev and S. I. Krasheninnikov, Phys. Plasmas 31, 012502 (2024); and S. I. Krasheninnikov and R. D. Smirnov, Phys. Plasmas (to be published)] the addition of the ballooning drive does not change the main features of anomalous transport of the multi-species plasma: (i) The transport of all ion species is described as a transport of the passive scalars in the turbulent field of the electrostatic potential and electron density perturbation; (ii) the density of ion species with a larger ratio of the mass to charge has the tendency to the accumulation/depletion in the vortices of plasma flow; and (iii) the cross-field transport of all plasma species (including electrons and ions) is described by the same anomalous transport coefficient.

Physics↗
DOE OSTI2024

Characterization of Precipitation-Strengthening Heat-Resistant Austenitic Stainless Steels for Life-Prediction Modeling

In this study, the role of minor alloying additions in 347H stainless steels (UNS34709, ASTM A240/240M) on creep-rupture properties at 650-750°C and microstructure evolution during isothermal exposure at 750°C has been investigated, aiming to provide the experimental dataset as boundary conditions of physics-based modeling for material/component life prediction. Four different 347H heats containing various amounts of boron and nitrogen additions were prepared and evaluated. The combined additions of B and N are found to stabilize the strengthening secondary M23C6 carbides and retarding the transition from M23C6 to sigma phase precipitates during thermal exposure. The observed kinetics of microstructure evolution reasonably explains the improvement of creep-rupture properties of 347H stainless steels with the B and N additions.

Yamamoto, Yukinori↗
DOE OSTI2023

Genomic dissection of anthracnose resistance response in sorghum [Sorghum bicolor (L.) Moench]

Sorghum [Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum. The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

59 BASIC BIOLOGICAL SCIENCES↗