Search NASA⌕ Search

SEARCH · Search NASA

Results for “Richtmyer-Meshkov instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Passive Freeze-Out of the Richtmyer-Meshkov Instability

The Richtmyer-Meshkov instability (RMI) poses a major challenge in inertial confinement fusion (ICF) due to its role in mixing and performance degradation. We report the first experimental observation of passive freeze-out of RMI in a low-pressure surrogate regime, an instability stagnation effect induced without modifying the driving pressure pulse or the target surface geometry. Using additively manufactured subsurface voids in a sinusoidal target, we convert a single shock into a sequence of weaker shocks that suppress instability growth upstream of the surface by over 70%. High-speed x-ray imaging and hydrodynamic simulations suggest that this suppression arises primarily from temporal shaping, with lesser contributions from spatial curvature and shock weakening. Our results demonstrate a driver-independent pathway for controlling shock-driven hydrodynamic instabilities relevant to ICF and other high energy density systems.

Materials science↗
DOE OSTI2024

Multiscale Richtmyer-Meshkov instability experiments to isolate the strain rate dependence of strength

Theoretical analysis of Richtmyer-Meshkov instability (RMI) experiments for solid strength shows that the strain rate for a given shock should be inversely proportional to the length scale of the sine wave perturbations when η 0 k , the nondimensional amplitude to wavelength ratio, is held fixed. To isolate the effect of strain rate on strength, free-surface RMI specimens of annealed copper were prepared with three perturbation regions with the same η 0 k but different length scales, characterized by the wavelength λ varying by a factor of 4.9 from 65 to 130 to 320 µ m . Three such targets with different fixed η 0 k ′ s were impacted to a shock pressure of 25 GPa, and the instability evolution was measured with photon Doppler velocimetry. Strengths estimated by comparing hydrocode simulation to the data increased from 700 to 1200 MPa as λ decreased. The different η 0 k targets exercised increasing amounts of plastic strain yet showed no evidence of strain hardening. Physical regime sensitivity analysis determined that for 320 − 65 µ m wavelength perturbations, the effective strain rates increased from 8.7 × 10 6 to 3.3 × 10 7 s − 1 , a factor of 3.8. Thus, the predicted strain rate scaling was mostly achieved but slightly suppressed by increased strength at higher rates. The RMI strength estimates were plotted against constitutive testing data on copper from the literature to show striking evidence of the strength upturn at higher strain rates. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗
DOE OSTI2026

Experiments and simulations on the Richtmyer-Meshkov instability with a thin intermediate layer

Experiments and simulations of the Richtmyer-Meshkov instability (RMI) in two- and three-layer configurations are presented. The two-layer case utilizes a light-over-heavy configuration and consists of air as the light gas and sulfur hexafluoride (SF 6 ) as the heavy gas. The three-layer case utilizes a light-intermediate-heavy configuration, with helium (He) as the light gas, air as the intermediate gas, and SF 6 as the heavy gas. Statistically significant differences in the mixing layer width of the lower interface are not observed between the two cases. This differs from the experiments of Schalles et al., where a small, though statistically significant, difference in mixing layer growth was observed between the two- and three-layer cases with a nominally two-dimensional, single mode perturbation. Notably, the perturbations on the lower interface in the present work do not grow large enough to significantly interact with the upper interface during the duration of the experiments. In conclusion, this suggests that the differences in mixing layer growth observed by Schalles et al. may be due to interactions of the perturbations on one interface with the other interface rather than being inherent to the three-layer problem.

42 ENGINEERING↗
DOE OSTI2025

Further Development of the Tamped Richtmyer-Meshkov Instability Method and Application to Molybdenum Dynamic Strength Calibration and Tabulation

The high pressure and high strain rate dynamic strength of Mo is experimentally and computationally investigated in the 3–20 GPa stress, 50–600 C temperature, and 10 5 –10 6 /s strain rate regimes using a modified tamped Richtmyer-Meshkov instability (RMI) method. Modifications to the tamped RMI method include a method to determine loading states during strain, a new strength calibration function based on interface shape, and a robust uncertainty quantification method. These modifications improve fidelity of the tamped RMI method, allowing evaluation of the compensating effects of pressure hardening, strain rate hardening, strain hardening, and thermal softening. The new calibration function based on interface shape is not limited to sinusoidal corrugations and could be applied to additional interface shapes. Plate impact experiments are performed at Argonne National Laboratory’s Advanced Photon Source’s Dynamic Compression Sector operated by Washington State University (DCS), driving a planar shock front through a corrugated Mo-D 2 O or Mo-C 8 F 18 interface, forcing the corrugation to significantly deform. The extent of interfacial deformation, RMI growth, is experimentally observed using X-ray phase contrast imaging at the DCS. RMI jet lengths and jet shapes are extracted from the experimental radiographs, then used to calibrate numerical simulations performed with the Sandia National Laboratories (SNL) hydrocode CTH. Mo yield strength, Y, as a function of shock pressure, P, strain rate, $\dot{\varepsilon }$, accumulated strain, ϵ, relative volumetric compression, RD , and temperature, T , is determined for each impact experiment and presented. The calibrated Mo yield strength values range 1.2–1.8 GPa, with strength generally decreasing as the impact stress increases. This trend is likely caused by thermal softening or strain localization. The tabular yield strength versus loading condition data presented in this paper can be used to fit complex strength models.

Voorhees, T. J. [Sandia National Lab. (SNL-CA), Li↗
DOE OSTI2025

Low viscosity of solid MgO at high pressures and strain rates measured using the laser-driven Richtmyer-Meshkov instability

Solids are often assumed to behave as viscous fluids under high-strain rates. This behavior has been studied experimentally in metals but largely unexplored in brittle ceramic materials. Here, in this study, we present a technique for measuring the viscosity of MgO using time-resolved velocimetry to track the growth rate of a perturbation caused by the Richtmyer-Meshkov instability at the OMEGA EP laser facility. To interpret the results, we use an in-house Eulerian hydrocode to simulate our experiments and model the plastic deformation of solid MgO as a viscous fluid. Results indicate that MgO has a surprisingly low upper bound to its effective viscosity of ∼10 2 ⁢ Pa s at 175 ± 15⁢ GPa, ∼3500⁢K, and 10 6 −10 7 s −1 strain rate.

Perez, Tyler M. [Johns Hopkins Univ., Baltimore, M↗
DOE OSTI2025

Differentiable lagrangian shock hydrodynamics with application to stable shock acceleration of density interfaces

We develop a gradient based optimization approach for the equations of compressible, Lagrangian hydrodynamics and demonstrate how it can be employed to automatically uncover strategies to control hydrodynamic instabilities arising from shock acceleration of density interfaces. Strategies for controlling the Richtmyer-Meshkov instability (RMI) are of great benefit for inertial confinement fusion (ICF) where shock interactions with many small imperfections in the density interface lead to instabilities which rapidly grow over time. These instabilities lead to mixing which, in the case of laser driven ICF, quenches the runaway fusion process ruining the potential for positive energy return. Here, we demonstrate that control of these instabilities can be achieved by optimization of initial conditions with ( > 100) parameters. Optimizing over a large parameter space like this is not possible with gradient-free optimization strategies. This requires computation of the gradient of the outputs of a numerical solution to the equations of Lagrangian hydrodynamics with respect to the inputs. We show that the efficient computation of these gradients is made possible via a judicious application of (i) adjoint methods, the exact formal representation of sensitivities involving partial differential equations, and (ii) automatic differentiation (AD), the algorithmic calculation of derivatives of functions. Careful regularization of multiple operators including artificial viscosity and timestep control is required. We perform design optimization of > 100 parameter energy field driving the Richtmyer Meshkov instability showing significant suppression while simultaneously enhancing the acceleration of the interface relative to a nominal baseline case.

Hydrophysics↗
DOE OSTI2024

Project DarkStar: Vision for LLNL in 2030

DarkStar was a Strategic Initiative (FY2021-FY2024) to investigate applications of Artificial Intelligence (AI) and Machine Learning (ML) to scientific problems of complex hydrodynamics, shockwave physics and energetic materials. The research focused on physics and engineering design as a process that can be tremendously accelerated through merging AI with advanced physics simulation on exascale-class platforms, and to experimentally validate this revolutionary new approach through dynamic materials campaigns. A central thread of scientific inquiry was in the application of AI to enable human understanding of how to control hydrodynamic instability (which has impacts to areas such as inertial confinement fusion) via engineering features and time-dependent sources. Motivated by an unfinished line of research started by Dr. Johnny von Neumann, AI-enabled simulation approaches were developed that allowed DarkStar researchers to uncover several ground-breaking discoveries regarding hydrodynamic instability, including how to completely suppress Richtmyer-Meshkov instability (RMI). These S&T discoveries, along with other advances, have shown the way for an entirely new approach to time-dependent problems known as inverse design – the idea that complex systems can be developed directly from a final state that is to be achieved and resolve the initial design via satisfying several constraints simultaneously via AI/ML. Through experimental campaigns conducted across a wide range of facilities in the NNSA complex (the High Explosive Application Facility at LLNL, the Dynamic Compression Sector/Advanced Photon Source at Argonne National Lab, and Special Technologies Laboratory at MSTS) the radical new AI/ML approach to engineering complex material dynamics was verified, establishing a new field of study within the realm of shock physics. As advanced manufacturing capabilities continue to develop, the great importance of inverse design as a means to apply that technology effectively for NNSA missions will feature prominently over this decade. DarkStar has positioned NNSA as a world-leader in this newly emerging cross-disciplinary area of AI methods for advanced physics simulation and pioneered multiple novel approaches that have enabled the broader scientific community. By allowing us to see past the horizon, to 2030 and beyond, DarkStar has illuminated the vast potential of AI/ML to impact a wide range of new national security missions and, consequently, multiple areas of further research have already emerged across the NNSA and DOD complex.

42 ENGINEERING↗
DOE OSTI2025

Dynamic Strength and Equation of State of Epon 828 and Diethanolamine (DEA) Polymer Epoxy Under Shock Loading

Polymers are increasingly utilized in engineering applications that can experience high loading rates, necessitating increased understanding of their response under such conditions. The tamped Richtmyer-Meshkov Instability (RMI) method was used to characterize the equation of state and dynamic strength of the polymer Epon 828 cured with Diethanolamine (DEA). Plate impact experiments that drove a uniaxial shock compression wave across a sinusoidally corrugated metal-polymer interface were performed to generate shock stresses from 4-12 GPa and strain rates of approximately 1/s in the polymer. X-ray phase contrast imaging recorded the shock motion in the polymer and subsequent interface evolution. Analysis of this data yielded the polymer equation of state and, in conjunction with numerical modeling, the dynamic strength. The equation of state was validated against one-dimensional plate impact experiments from existing literature. The dynamic strength was compared to prior data for Epon 828 and related polymers at lower strain rates and found to exhibit significant strain rate and pressure-hardening effects. The strength of the Epon 828 polymer at 10 6 1/s was found to be approximately 1.5 GPa, suggesting that it is comparable to the strength of high strength metals at these dynamic conditions.

Equation of state↗
DOE OSTI2024

A high-order, localized-artificial-diffusivity method for Eulerian simulation of multi-material elastic-plastic deformation with strain hardening

A high-order method for Eulerian simulation of material undergoing large elastic–plastic deformation is developed. Thermodynamically consistent hyperelastic constitutive relations are assumed, facilitating the treatment of solids, liquids, and gases in a unified manner. Here, the method enables the simulation of multi-material interactions using a diffuse interface approach. Numerical capturing of material interfaces, shock waves, contact surfaces, and elastic-plastic strain discontinuities using high-order compact-difference schemes is assisted by Localized Artificial Diffusivity (LAD). In the new setting involving elastic–plastic deformation, the previously established terms for the artificial properties are verified to effectively regularize normal shocks. Additional LAD terms are introduced to the elastic and plastic kinematic equations to regularize shear shocks and other strain discontinuities, improving solution stability. Other important features of the method that improve robustness include the numerical treatment of compatibility terms in the kinematic equations, and the treatment of rotation. Particular emphasis is focused toward new advancements of the methods for plastic-deformation integration and the associated strain hardening of the material, including rate-dependent plasticity. The method is demonstrated on a variety of test problems, including 1-D impacts, a variant of the Shu-Osher problem, a Taylor impact, and a Richtmyer-Meshkov instability between two elastic–plastic solids with strain hardening.

42 ENGINEERING↗
DOE OSTI2024

Equation-of-state measured via x-ray phase contrast imaging for Epon 828/DEA epoxy

Epoxies are a broad class of polymer materials often used as adhesive, structural or binding materials. Epon 828 is an epoxy resin that can be polymerized with a variety of curing agents with the choice of curing agent potentially having an effect on the resulting epoxy polymer’s material properties. In this study, the dynamic behavior of Epon 828 epoxy resin cured with diethanolamine (DEA) is investigated through a series of tamped Richtmyer-Meshkov instability (RMI) experiments measured with x-ray phase-contrast imaging. The measured shock and particle velocities are combined with data in the literature to calibrate Mie-Grüneisen equations-of-state (EOS) for portions and combinations of the collective dataset. The calibrated Mie-Grüneisen EOS are validated against particle velocity profiles extracted from published literature using the Eulerian hydrocode CTH. Here, the Mie-Grüneisen EOS fit to only the tamped RMI experimental data presented here most closely follows the particle velocity profile in the published literature.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Vanishing dynamic strength measured in a transient high-pressure phase of tin

This work reports two independent experimental estimations of the dynamic strength of the body-centered tetragonal (bct) 𝛾 phase of tin, which occurs at pressures above about 9 GPa and transforms promptly back to the ambient 𝛽 phase upon pressure release. Measuring strength in such a transient high-pressure phase is challenging. One measurement used free-surface Richtmyer-Meshkov instabilities generated with gas gun impact. Another set of measurements used ramp-release loading in a pulsed-power facility. Strength estimations came from comparison to simulations using a comprehensive multiphase modeling framework that includes equation of state, shear moduli, and strength separately for each phase, and treats mixed-phase regions. Both experimental methods found the 𝛾-phase strength to be very low, within experimental uncertainty of zero. The existing literature on other materials, by contrast, almost universally reports higher strength in transient high-pressure phases compared with ambient phases. Recent Molecular-Dynamics simulations on tin in the literature showed almost zero deviatoric strength during a deformation-induced bct → bct transformation in which one of the 𝛾-phase 𝑎 axes “flips” to the 𝑐 axis. This reorientation currently provides the most plausible explanation for the low observed strength in 𝛾-phase tin.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Onset of Rayleigh-Bénard convection at fuel-ablator interfaces in inertial confinement fusion simulations

Here, we demonstrate the onset of Rayleigh-Bénard convection (RBC) near the fuel-ablator interface of inertial confinement fusion (ICF) implosion simulations for the scenario in which Rayleigh-Taylor or Richtmyer-Meshkov instabilities are suppressed. This convective heating within the cold fuel can degrade the adiabat and therefore performance of ICF implosions even without mixing of fuel and ablator. Our work suggests additional considerations to realize design adiabats in otherwise ideal ICF implosions: first, via control of the temperature differences between ablator and fuel and, second, control of the fuel acceleration which we show has a complex interplay with the RBC dynamics.

Physics - Plasma physics↗
DOE OSTI2024

A theoretical/computational framework to measure SiO2 and MgO viscosity at high pressure

The convection of the mantle of Earth and super-Earths is important for many terrestrial phenomena, from plate tectonics to outgassing. Rheological properties, such as viscosity, regulate the transport of thermal energy and mass. However, the viscosity of mantle-relevant materials, such as MgO, at relevant pressures (>120 GPa) are not well constrained. The objective of this work was to develop a computational platform to simulate novel experiments aiming to measure the viscosity of MgO at high pressures. Experiments performed by our collaborators at Johns Hopkins University and Lawrence Livermore National Laboratory use the OMEGA EP laser facility to shock a corrugated MgO interface to 170 GPa, with resulting velocity evolution governed by the viscous Richtmyer-Meshkov instability. We used an in-house hydrocode to simulate this process and thus provide a bound on viscosity by comparing our simulations results to these experiments, as well as to examine the physical processes at play. We simulated the experiments with different values of MgO viscosity (from inviscid to 10,000 Pa∙s) while taking into account the unsteady laser pulse, the material's equation of state, and the rate-dependent constitutive relation for MgO, and the materials' equations of state. Our results suggest that MgO at these conditions has a viscosity within an order of magnitude of 5000 Pa∙s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗