Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ruthenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Atomic Layer Deposition of Ruthenium Films Using Ruthenium Diketonates and O 2 , H 2 , or N 2 O: The Role of Ruthenium Etching

In this work, the evolution of the surface during the steps that comprise the atomic layer deposition (ALD) of ruthenium films on a nickel substrate using tris(2,2,6,6-tetramethyl-3,5-heptanedionato)ruthenium(III) (Ru(tmhd) 3 ) and molecular oxygen was characterized using a combination of X-ray photoelectron (XPS) and reflection–absorption infrared (RAIRS) spectroscopies. The uptake of the Ru metalorganic precursor was determined to be activated, involving the average loss of two out of the three ligands (and the retention of the third, in molecular form, at the surface–vacuum interface), and self-limited, as required in ALD. The reaction of the resulting layer from that first half of the ALD cycle with O 2 proved to be more complex: in addition to the desired removal of the carbon-containing material, the Ni substrate becomes oxidized, and some Ru is etched away in the form of the volatile RuO 4 gas. By testing different combinations of exposures and temperatures it was determined that Ru film growth was possible, but tuning and optimizing the ALD or atomic layer etching (ALE) process conditions for maximum film growth or removal rate per cycle proved difficult. Replacing O 2 with H 2 was shown not to be viable either, as such an agent can reduce the nickel oxide formed after O 2 treatments (in fact, Ru(tmhd) 3 can do this as well) but not remove the carbonaceous material deposited on the surface by the Ru precursor. The use of N 2 O, on the other hand, showed much promise, being capable of removing most of the surface carbon without affecting the Ru film or the Ni substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Band offsets of a ruthenium gate on ultrathin high-{kappa} oxide films on silicon

Valence-band and conduction-band edges of ultrathin oxides (SiO{sub 2}, HfO{sub 2}, Hf{sub 0.7}Si{sub 0.3}O{sub 2}, and Al{sub 2}O{sub 3} grown on silicon) and their shifts upon sequential metallization with ruthenium have been measured using synchrotron-radiation-excited x-ray, ultraviolet, and inverse photoemissions. From these techniques, the offsets between the valence-band and conduction-band edges of the oxides, and the ruthenium metal gate Fermi edge have been directly measured. In addition the core levels of the oxides and the ruthenium have been characterized. Upon deposition, Ru remains metallic and no chemical alteration of the underlying oxide gates, or interfacial SiO{sub 2} in the case of the high-{kappa} thin films, can be detected. However a clear shift of the band edges is measured for all samples due to the creation of an interface dipole at the ruthenium-oxide interface. Using the energy gap, the electron affinity of the oxides, and the ruthenium work function that have been directly measured on these samples, the experimental band offsets are compared to those predicted by the induced gap states model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Three-dimensional ruthenium-doped TiO 2 sea urchins for enhanced visible-light-responsive H 2 production

Here, three-dimensional (3D) monodispersed sea urchin-like Ru-doped rutile TiO 2 hierarchical architectures composed of radially aligned, densely-packed TiO 2 nanorods have been successfully synthesized via an acid-hydrothermal method at low temperature without the assistance of any structure-directing agent and post annealing treatment. The addition of a minuscule concentration of ruthenium dopants remarkably catalyzes the formation of the 3D urchin structure and drives the enhanced photocatalytic H 2 production under visible light irradiation, not possible on undoped and bulk rutile TiO 2 . Increasing ruthenium doping dosage not only increases the surface area up to 166 m 2 g –1 but also induces enhanced photoresponse in the regime of visible and near infrared light. The doping introduces defect impurity levels, i.e. oxygen vacancy and under-coordinated Ti 3+ , significantly below the conduction band of TiO 2 , and ruthenium species act as electron donors/acceptors that accelerate the photogenerated hole and electron transfer and efficiently suppress the rapid charge recombination, therefore improving the visible-light-driven activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arsenate adsorption on ruthenium oxides: A spectroscopic and kinetic investigation

Arsenate adsorption on amorphous (RuO{sub 2} {center_dot} 1.1H{sub 2}O) and crystalline (RuO{sub 2}) ruthenium oxides was evaluated using spectroscopic and kinetic methods to elucidate the adsorption mechanism. Extended X-ray absorption fine structure spectroscopy (EXAFS) was used to determine the local coordination environment of adsorbed arsenate. Additionally, pressure-jump (p-jump) relaxation spectroscopy was used to investigate the kinetics of arsenate adsorption/desorption on ruthenium oxides. Chemical relaxations resulting from the induced pressure change were monitored via electrical conductivity detection. EXAFS data were collected for two initial arsenate solution concentrations, 3 and 33 mM at pH 5. The collected spectra indicated a similar coordination environment for arsenate adsorbed to RuO{sub 2} {center_dot} 1.1H{sub 2}O for both arsenate concentrations. In contrast the EXAFS spectra of RuO{sub 2} indicated differences in the local coordination environments for the crystalline material with increasing arsenate concentration. Data analysis indicated that both mono- and bidentate surfaces complexes were present on both RuO{sub 2} {center_dot} 1.1H{sub 2}O and RuO{sub 2}. Relaxation spectra from the pressure-jump experiments of both ruthenium oxides resulted in a double relaxation event. Based on the relaxation spectra, a two step reaction mechanism for arsenate adsorption is proposed resulting in the formation of a bidentate surface complex. Analysis of the kinetic and spectroscopic data suggested that while there were two relaxation events, arsenate adsorbed to ruthenium oxide surfaces through both mono- and bidentate surface complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impacts of ruthenium valence state on the electrocatalytic activity of ruthenium ion-complexed graphitic carbon nitride/reduced graphene oxide nanosheets towards hydrogen evolution reaction

Design and engineering of effective electrode catalysts represents a critical first step for hydrogen production by electrochemical water splitting. Nanocomposites based on ruthenium atomically dispersed within a carbon scaffold have emerged as viable candidates. In the present study, ruthenium metal centers are atomically embedded within graphitic carbon nitride/reduced graphene oxide nanosheets by thermal refluxing. Subsequent chemical reduction/oxidation leads to ready manipulation of the ruthenium valence state, as evidenced in microscopic and spectroscopic measurements, and hence enhancement/diminishment of the electrocatalytic activity towards hydrogen evolution reaction in both acidic and alkaline media. Further, this is largely ascribed to the increased/reduced contribution of the Ru valence electrons to the density of state near the Fermi level which dictates the binding and reduction of hydrogen. Results from this study highlight the significance of the valence state of metal centers in the manipulation and optimization of the catalytic performance of single atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of the contact between a ruthenium surface with a single nanoasperity and a flat ruthenium surface: Molecular dynamics simulations

We study the dynamics of the contact between a pair of surfaces (with properties designed to mimic ruthenium) via molecular dynamics simulations. In particular, we study the contact between a ruthenium surface with a single nanoasperity and a flat ruthenium surface. The results of such simulations suggest that contact behavior is highly variable. The goal of this study is to investigate the source and degree of this variability. We find that during compression, the behavior of the contact force displacement curves is reproducible, while during contact separation, the behavior is highly variable. Examination of the contact surfaces suggests that two separation mechanisms are in operation and give rise to this variability. One mechanism corresponds to the formation of a bridge between the two surfaces that plastically stretches as the surfaces are drawn apart and eventually separate in shear. This leads to a morphology after separation in which there are opposing asperities on the two surfaces. This plastic separation/bridge formation mechanism leads to a large work of separation. The other mechanism is a more brittle-like mode in which a crack propagates across the base of the asperity (slightly below the asperity/substrate junction) leading to most of the asperity on one surface or the other after separation and a slight depression facing this asperity on the opposing surface. This failure mode corresponds to a smaller work of separation. This failure mode corresponds to a smaller work of separation. Furthermore, contacts made from materials that exhibit predominantly brittle-like behavior will tend to require lower work of separation than those made from ductile-like contact materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dicarbonyl[10,10-dimethyl-5,15-bis(pentafluorophenyl)biladiene]ruthenium(II): discovery of the first ruthenium tetrapyrrole cis -dicarbonyl complex by X-ray and electron diffraction

Dicarbon­yl[10,10-dimethyl-5,15-bis­(penta­fluoro­phen­yl)biladiene]ruthenium(II), [Ru(C 33 H 16 F 10 N 4 )(CO) 2 ] or Ru(CO) 2 [DMBil1], is the first reported ruthenium(II) cis-dicarbonyl tetra­pyrrole complex. The neutral complex sports two carbonyls and an oligo­tetra­pyrrolic biladiene ligand. Notably, the biladiene adopts a coordination geometry that is well distorted from square planar and much more closely approximates a seesaw arrangement. Accordingly, Ru(CO) 2 [DMBil1] is not only the first ruthenium cis-dicarbonyl with a tetra­pyrrole ligand, but also the first metal biladiene complex in which the tetra­pyrrole does not adopt a (pseudo-)square-planar coordination geometry. Ru(CO) 2 [DMBil1] is weakly luminescent, displaying λ em = 552 nm upon excitation at λ ex = 500 nm, supports two reversible 1 e – reductions at –1.45 and –1.73 V (versus Fc + /Fc), and has significant absorption features at 481 and 531 nm, suggesting suitability for photo­catalytic and photosensitization applications. While the structure of Ru(CO) 2 [DMBil1] was initially determined by X-ray diffraction, a traditionally acceptable quality structure could not be obtained (despite multiple attempts) because of consistently poor crystal quality. Furthermore, an independent structure obtained from electron diffraction experiments corroborates the structure of this unusual biladiene complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accessing and Photo-Accelerating Low-Overpotential Pathways for CO 2 Reduction: A Bis-Carbene Ruthenium Terpyridine Catalyst

A ruthenium catalyst bearing a bidentate bis(carbene) ligand is prepared and studied as a catalyst for CO 2 electroreduction. The catalyst [Ru(tpy)(bis-mim)(MeCN)][PF 6 ] 2 (tpy) is 2,2′,:6′,2″-terpyridine; bis-mim is (methylenebis(N-methylimidazol-2-ylidene)) mediates reduction of CO 2 into CO with a turnover frequency of 630 s –1 and Faradaic efficiency (FE) of 30% at an overpotential of 730 mV. The strongly donating bis(carbene) ligand also enables access to a pathway operating at a lower overpotential of ca. 310 mV. While low-overpotential catalysis is slow in the dark (TOF = 0.01 s –1 ), visible light illumination increases the rate 10-fold (TOF = 0.11 s –1 ). Here, a full mechanistic picture is developed using kinetic analysis from cyclic voltammetry, spectroelectrochemistry, and computational methods, with the bis-mim ligand facilitating rapid CO 2 activation at low overpotentials. Comparisons with other ruthenium catalysts yield insight into the ability to tune the rate of chemical steps (e.g., ligand dissociation and CO 2 nucleophilic attack) and the overpotential by tailoring the primary coordination sphere while retaining the “redox-active” tpy ligand.

CO2 reduction↗

Platinum-ruthenium nanotubes and platinum-ruthenium coated copper nanowires as efficient catalysts for electro-oxidation of methanol

The sluggish kinetics of methanol oxidation reaction (MOR) is a major barrier to the commercialization of direct methanol fuel cells (DMFCs). In this study, we report a facile synthesis of platinum–ruthenium nanotubes (PtRuNTs) and platinum–ruthenium-coated copper nanowires (PtRu/CuNWs) by galvanic displacement reaction using copper nanowires as a template. The PtRu compositional effect on MOR is investigated; the optimum Pt/Ru bulk atomic ratio is about 4 and surface atomic ratio about 1 for both PtRuNTs and PtRu/CuNWs. Enhanced specific MOR activities are observed on both PtRuNTs and PtRu/CuNWs compared with the benchmark commercial carbon-supported PtRu catalyst (PtRu/C, Hispec 12100). Finally, x-ray photoelectron spectroscopy (XPS) reveals a larger extent of electron transfer from Ru to Pt on PtRu/CuNWs, which may lead to a modification of the d-band center of Pt and consequently a weaker bonding of CO (the poisoning intermediate) on Pt and a higher MOR activity on PtRu/CuNWs.

30 DIRECT ENERGY CONVERSION↗

The Role of Protons and Hydrides in the Catalytic Hydrogenolysis of Guaiacol at the Ruthenium Nanoparticle-water Interface

The mechanistic roles of free hydronium ions, surface hydrides, and interfacial protons during guaiacol hydrodeoxygenation (HDO) on ruthenium nanoparticles are established. As guaiacol adsorbs on Ru, it loses its strong aromaticity and undergoes a rapid H-shift from its hydroxyl to meta carbons (in relation to its hydroxyl group), leading enol and keto surface isomers to exist in chemical equilibrium. HDO occurs via a hydridic H-adatom (H*) attack to the enol, followed by a kinetically relevant C-O bond rupture step, during which water shuttles the hydroxyl proton, enabling its intramolecular attack to the methoxy, evolving a high charged [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state. The competing HYD begins with a rapid H* attack to the keto, before a second, kinetically relevant H* attack, without proton involvement. Water, despite shifting the thermodynamics towards the more polar surface keto, promotes HDO to a much greater extent than HYD, because of its dual catalytic roles—it mobilizes hydroxyl proton (Brønsted acid) to cleave the strong C-O bond, synchronizing with the Ru metal surface (base) function that stabilizes the resulting [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state, and the water layers solvate this charged transition state, further reducing its free energy. Free hydronium ions do catalyze a separate homogeneous enol-keto isomerization, but this reaction is kinetically unrelated to HDO catalysis. This mechanistic picture explains the strong effects of polar protic solvent in hydrodeoxygenation, highlighting (i) the requirements of surface hydrides and interfacial protons acting in tandem to complete a HDO turnover and (ii) the cooperative role of protic solvent and metal surface in breaking the aromaticity and stabilizing charged reactive precursors and transition states.

Shangguan, Junnan↗

Synthesis, Protonation, and Reduction of Ruthenium–Peroxo Complexes with Pendent Nitrogen Bases

Cyclopentadienyl and pentamethylcyclopentadienyl ruthenium(II) complexes have been synthesized with cyclic (RPCH 2 NR'CH 2 ) 2 ligands, with the goal of using these [Cp R" Ru(P R 2 N R' 2 )] + complexes for catalytic O 2 reduction to H 2 O (R = t-butyl, phenyl; R' = benzyl, phenyl; R" = methyl, H). In each compound, the Ru is coordinated to the two phosphines, positioning the amines of the ligand in the second coordination sphere where they may act as proton relays to a bound dioxygen ligand. The phosphine, amine, and cyclopentadienyl substituents have been systematically varied in order to understand the effects of each of these parameters on the properties of the complexes. These Cp R" Ru(P R 2 N R' 2 ) + complexes react with O 2 to form η 2 -peroxo complexes, which have been characterized by NMR, IR, and X-ray crystallography. The peak reduction potentials of the O 2 ligated complexes have been shown by cyclic voltammetry to vary as much as 0.1 V upon varying the phosphine and amine. In the presence of acid, protonation of these complexes occurs at the pendent amine, forming a hydrogen bond between the protonated amine and the bound O 2 . The ruthenium–peroxo complexes decompose upon reduction, precluding catalytic O 2 reduction. Finally, the irreversible reduction potentials of the protonated O 2 complexes depend on the basicity of the pendent amine, giving insight into the role of the proton relay in facilitating reduction.

Tronic, Tristan A.↗