Search NASA⌕ Search

SEARCH · Search NASA

Results for “SAILPLANE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Pilot evaluation of sailplane handling qualities

The evaluation sailplanes were found generally deficient in the area of cockpit layout. The pilots indicated general dissatisfaction with high pitch sensitivity especially when coupled with inertially induced stick forces. While all sailplanes were judged satisfactory for centering thermals and in the ease of speed control in circling flight, pilot opinions diverged on the maneuvering response, pull-out characteristics from a dive, and on phugoid damping. Lateral-directional control problems were noted mainly during takeoff and landing for most sailplanes with the landing wheel ahead of center of gravity. Pilot opinion of in-flight lateral-directional stability and control was generally satisfactory. Five of the evaluation sailplanes exhibited a very narrow airspeed band in which perceptible stall warning buffet occurred. However, this characteristic was considered not objectionable when stall recovery was easy. The pilots objected to the characteristics of a wide airspeed band of stall warning followed by a stall with yawing and rolling tendency and substantial loss of altitude during the stall. Glide path control for the evaluation sailplanes was found to be generally objectionable.

Bennett, A. G., Jr.↗
NASA NTRS1979

The ultralight sailplane

As presently envisioned, the ultralight sailplane is intermediate in size, cost and performance between current hang gliders and the lower end of the traditional sailplane spectrum. In the design of an ultralight sailplane, safety, low cost, and operational simplicity were emphasized at the expense of absolute performance. An overview of the design requirements for an ultralight sailplane is presented. It was concluded that by a judicious combination of the technologies of hang gliding, human powered flight, conventional soaring and motor gliding, an operationally and economically viable class of ultralight, self-launching sailplanes can be developed.

Mcmasters, J. H.↗
NASA NTRS1985

Flutter clearance of the Schweizer 1-36 deep-stall sailplane

A Schweizer 1-36 sailplane was modified for a controlled, deep-stall flight program. This modification allowed the horizontal stabilizer to pivot as much as 70 deg leading edge down. Ground vibration and flutter testing were accomplished on the sailplane with the horizontal stabilizer in the normal flight and deep-stall flight positions. Test results indicated satisfactory damping levels and trends for the structural modes of the sailplane. The modified sailplane was demonstrated to be free of aeroelastic instabilities to 83 KEAS with the horizontal stabilizer in the normal flight position and to 39 KEAS with the horizontal stabilizer in the deep-stall flight position. This flight envelope was adequate for the controlled, deep-stall flight experiments.

Kehoe, M. W.↗
NASA NTRS1981

NASA research related to sailplane airfoils

The theoretical methods and experimental facilities at the NASA Langley Research Center have been employed to conduct investigations of sailplane airfoils. The unique and powerful capabilities of the Eppler Program have been used to design and analyze many airfoils and to smooth several Wortmann airfoils. Wind-tunnel investigations of two sailplane airfoils have been conducted in the Langley low-turbulence pressure tunnel. A procedure for sailplane performance improvement has been outlined.

Somers, D. M.↗
NASA NTRS1995

Sailplane Glide Performance and Control Using Fixed and Articulating Winglets

An experimental study was conducted to investigate the effects of controllable articulating winglets on glide performance and yawing moments of high performance sailplanes. Testing was conducted in the Texas A&M University 7 x 10 foot Low Speed Wind Tunnel using a full-scale model of the outboard 5.6 feet of a 15 meter class high performance sailplane wing. Different wing tip configurations could be easily mounted to the wing model. A winglet was designed in which the cant and toe angles as well as a rudder on the winglet could be adjusted to a range of positions. Cant angles used in the investigation consisted of 5, 25, and 40 degrees measured from the vertical axis. Toe-out angles ranged from 0 to 22.5 degrees. A rudder on the winglet was used to study the effects of changing the camber of the winglet airfoil on wing performance and wing yawing moments. Rudder deflections consisted of-10, 0, and 10 degrees. Test results for a fixed geometry winglet and a standard wing tip are presented to show the general behavior of winglets on sailplane wings, and the effects of boundary-layer turbulators on the winglets are also presented. By tripping the laminar boundary-layer to turbulent before laminar separation occurs, the wing performance was increased at low Reynolds numbers. The effects on the lift and drag, yawing moment, pitching moment, and wing root bending moment of the model are presented. Oil flows were used on the wing model with the fixed geometry winglet and the standard wing tip to visualize flow directions and areas of boundary layer transition. A cant angle of 25 degrees and a toe-out angle of 2.5 degrees provided an optimal increase in wing performance for the cant and toe angles tested. Maximum performance was obtained when the winglet rudder remained in the neutral position of zero degrees. By varying the cant, toe, and rudder angles from their optimized positions, wing performance decreases. Although the winglet rudder proved to be more effective in increasing the yawing moment compared to varying the cant and toe angles, the amount of increased yawing moment was insignificant when compared to that produced by the vertical tail. A rudder on the winglet was determined to be ineffective for providing additional yaw control.

Colling, James David↗
NASA NTRS1978

Initial feasibility study of a microwave-powered sailplane as a high-altitude observation platform

It is shown that a microwave-powered sailplane can be a reasonable substitute for a satellite in some missions requiring only limited coverage of the surface of the earth. A mode of operation in which the aircraft cyclically climbs to high altitude in the beam, and then glides for several hundred kilometers, is feasible and takes advantage of the inherent forward speed of the sailplane at high altitude.

Heyson, H. H.↗
NASA NTRS1979

Optimum Tail Plane Design for Sailplanes

Classical drag equations in a modern version were used to calculate the influence of tail modifications on the drag of a standard class sailplane. The profile drag which depends on the Reynolds number is included in the calculations. Minimum drag is compared with real drag for two lift coefficients. Some results have no clear tendency but low tail area and relatively low tail aspect ratio give some advantages. Optimum and real lift ratios between wing and tail plane are compared for the original sailplane.

Mayland, K.↗
NASA NTRS1986

The RP-2 sailplane

The all-composite design and fabrication methodology employed by Rensselaer Polytechnic Intitute's 'CAPGLIDE' program in producing such sailplanes as the RP-2 is discussed. The RP-2's production methods, which furnish hands-on experience for the students enrolled in the program, encompass wet lay-up and vacuum bag procedures, as well as autoclave curing of prepreg parts employing graphite, kevlar, and glass fiber reinforcements. Epoxy resins are the primary matrix materials, and are used in conjunction with polymer foams for the sandwich panel elements of the sailplane structure.

Winckler, Steven↗
NASA NTRS1989

Experimental investigation of the crashworthiness of scaled composite sailplane fuselages

The crash dynamics and energy absorption of composite sailplane fuselage segments undergoing nose-down impact were investigated. More than 10 quarter-scale structurally similar test articles, typical of high-performance sailplane designs, were tested. Fuselages segments were fabricated of combinations of fiberglass, graphite, Kevlar, and Spectra fabric materials. Quasistatic and dynamic tests were conducted. The quasistatic tests were found to replicate the strain history and failure modes observed in the dynamic tests. Failure modes of the quarter-scale model were qualitatively compared with full-scale crash evidence and quantitatively compared with current design criteria. By combining material and structural improvements, substantial increases in crashworthiness were demonstrated.

Kampf, Karl-Peter↗
NASA NTRS1977

Experimental and theoretical low-speed aerodynamic characteristics of a Wortmann airfoil as manufactured on a fiberglass sailplane

A low turbulence pressure tunnel evaluation is reported for low speed aerodynamic characteristics of the FX 66-17AII-182 airfoil as manufactured on a fiberglass sailplane. The results were compared with data for design coordinates obtained from another low turbulence wind tunnel and with theoretical calculations generated by a viscous flow airfoil computer program. The investigation was performed over a Reynolds number range, based on airfoil chord, of approximately 0.5 x 1 million to 6 million and a Mach number range of about 0.05 to 0.35. Comparison with data from another wind tunnel for the design coordinates showed slightly higher drag for the manufactured section.

Somers, D. M.↗
NASA NTRS1979

On Global Optimal Sailplane Flight Strategy

The derivation and interpretation of the necessary conditions that a sailplane cross-country flight has to satisfy to achieve the maximum global flight speed is considered. Simple rules are obtained for two specific meteorological models. The first one uses concentrated lifts of various strengths and unequal distance. The second one takes into account finite, nonuniform space amplitudes for the lifts and allows, therefore, for dolphin style flight. In both models, altitude constraints consisting of upper and lower limits are shown to be essential to model realistic problems. Numerical examples illustrate the difference with existing techniques based on local optimality conditions.

Sander, G. J.↗
NASA NTRS1979

Advanced composites in sailplane structures: Application and mechanical properties

Advanced Composites in sailplanes mean the use of carbon and aramid fibers in an epoxy matrix. Weight savings were in the range of 8 to 18% in comparison with glass fiber structures. The laminates will be produced by hand-layup techniques and all material tests were done with these materials. These values may be used for calculation of strength and stiffness, as well as for comparison of the materials to get a weight-optimum construction. Proposals for material-optimum construction are mentioned.

Muser, D.↗
NASA NTRS1979

An exploratory investigation of the effect of a plastic coating on the profile drag of a practical-metal-construction sailplane airfoil

The Langley low-turbulence pressure tunnel to determine the effect of a plastic coating on the profile drag of a practical-metal-construction sailplane airfoil was investigated. The model was tested with three surface configurations: (1) filled, painted, and sanded smooth; (2) rough bare metal; and (3) plastic-coated. The results are compared with data for the design airfoil (Wortmann FX 67-K-170/17) from another low-turbulence wind tunnel. The investigation was conducted at Reynolds numbers based on airfoil chord of 1.1 x 10 to the 6th power, 2.2 x 10 to the 6th power, and 3.3 x 10 to the 6th power at a Mach number of 0.10.

Somers, D. M.↗
NASA NTRS1979

Sensitivity study for a remotely piloted microwave-powered sailplane used as a high-altitude observation

The sensitivity of several performance characteristics of a proposed design for a microwave-powered, remotely piloted, high-altitude sailplane to changes in independently varied design parameters was investigated. Results were expressed as variations from baseline values of range, final climb altitude and onboard storage of radiated energy. Calculated range decreased with increases in either gross weight or parasite drag coefficient; it also decreased with decreases in lift coefficient, propeller efficiency, or microwave beam density. The sensitivity trends for range and final climb altitude were very similar. The sensitivity trends for stored energy were reversed from those for range, except for decreasing microwave beam density. Some study results for single parameter variations were combined to estimate the effect of the simultaneous variation of several parameters: for two parameters, this appeared to give reasonably accurate results.

Turriziani, R. V.↗
NASA NTRS1984

Initial Sailplane Project: The RP-1

The annual static loading tests were made on the assembled wing/fuselage structure of the RP-1 sailplane. Simple wing bending and wing bending/torsion tests up to about four G's were made, using sand bag loading on the inverted aircraft. Bending a torsion deflections were measured and compared to those obtained in previous years' tests. It appears that the structure is retaining its original strength and stiffness very well. This aircraft has been disassembled and stored on the Jonsson Engineering Center under ambient, indoor conditions of temperature and humidity.

Source record↗
NASA NTRS1984

Second Sailplane Project: The RP-2

Progress has been made on the design fabrication and installation of a tension carry-through linkage between the aft parts of the port and starboard wings to resist forward bending deflection on the RP-2 sailplane. In addition, towhook/release mechanisms, landing gear and wheel brake assembly, compound curved sandwich composite fuselage shells and an enclosed trailer to house and transport the complete disassembled aircraft, have all undergone various stages of design, fabrication, installation and testing.

Source record↗