Search NASA⌕ Search

SEARCH · Search NASA

Results for “SBR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Effect of crosslinking density on biaxial relaxation of SBR by using reduced variables

The use of reduced variables to account for the effect of crosslinking density in a styrene-butadiene rubber (SBR) system is demonstrated for general biaxial stress states. Recently published results from stress relaxation tests on five SBR vulcanizates crosslinked to different degrees by tetramethylthiuram disulfide were superposed by using the crosslinking density as a reduction variable. The equilibrium shear modulus calculated from the master relaxation curve at long reduced times was in satisfactory agreement with other results for SBR. The time-axis shifts were related in a linear logarithmic manner to the crosslinking density but had a slope slightly less than values previously reported for elastomer systems.

Arenz, R. J.↗
DOE OSTI2024

Langmuir adsorption model to assess the impact of silane coupling on nano-dispersion of silica in SBR

Surface active agents are often used to improve dispersion of nanoparticles. Quantitative correlation between these surface-active molecules and nanoscale dispersion is absent from the literature partly because a quantitative measure of nanoscale dispersion does not exist. Recently, we have developed the Virial-van der Waals method to quantify dispersion in nanocomposites using virial coefficients. In this paper, the Langmuir adsorption model is used to quantify the influence of surface-active agents on nano-scale dispersion in terms of the effective second virial coefficient B 2 *. The impact of silane coupling agent on the nano-dispersion and silica aggregate structure in precipitated silica/SBR nanocomposites is demonstrated. It is shown that the higher viscosity SBR matrix led to a greater silica aggregate structural breakup, while lower viscosity matrix improved surface silanization. The isomeric content of the SBR, which impacts the dielectric behavior, impacted whether the system could be modeled through a mean-field or specific interactions. We earlier showed that larger aggregates improve dispersion, and this is reaffirmed in these results. After account is made for aggregate size, nano-scale dispersion improves with the addition of silane coupling agent. The behavior is well modeled using Langmuir monolayer adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

High frequency scattering from trihedral corner reflectors and other benchmark targets - SBR versus experiment

A general method for calculating the radar cross section (RCS) from a three-dimensional target is described. The target is first constructed by using a solid-geometry-modeling computer-aided design (CAD) package. Following the shooting and bouncing ray (SBR) method, a very dense grid of rays is launched from the incident direction toward the target. Each ray is traced according to the geometrical optics theory including the effect of ray tube divergence, polarization, and material reflection coefficient. At the point where the ray exits the target, a physical optics-type integration is performed to obtain the scattered far fields. This method is tested using several simple examples involving interaction among plates, cylinders, and spheres. The theoretical results are generally in good agreement with measured data.

Baldauf, John↗
NASA NTRS1965

Mechanical behavior of SBR-glass bead composites

Mechanical properties of stryene-butadiene rubber glass bead composites, and theoretical model on isothermal volume dilatation and stress-strain relationship in filler concentration

STRESS-STRAIN DISTRIBUTION↗
NASA NTRS1977

On the form of the strain energy function for a family of SBR materials

Styrene-butadiene materials with varying crosslink densities are analyzed through use of a strain energy function of the type introduced by Valanis and Landel (1967). A form of the strain energy function derived from strip biaxial tests proves to be accurate when checked against uniaxial and other biaxial test results.

Arenz, R. J.↗
NASA NTRS1976

Friction characteristics of 20 x 4.4, type 7, aircraft tires constructed with different tread rubber compounds

A test program was conducted at the Langley aircraft landing loads and traction facility to evaluate the friction characteristics of 20 x 4.4, type, aircraft tires constructed with experimental cut-resistant, tread rubber compounds. These compounds consisted of different blends of natural rubber (NR) and an alfin catalyzed styrene-butadiene copolymer rubber (SBR). One tire having a blend of 30 SBR and 70 NR and another having a blend of 60 SBR and 40 NR in the tread were tested together with a standard production tire with no SBR content in the tread rubber. The results of this investigation indicated that the test tires constructed with the special cut-resistant tread rubber compositions did not suffer any significant degradation in tire friction capability when compared with the standard tire. In general, tire friction capability decreased with increasing speed and surface wetness condition. As yaw angle increased, tire braking capability decreased while tire cornering capability increased. Tread-wear data based on number of brake cycles, however, suggested that the tires with alfin SBR blends experienced significantly greater wear than the standard production tire.

Dreher, R. C.↗
NASA NTRS2000

IFSAR Simulation Using the Shooting and Bouncing Ray Technique

Interferometric Synthetic Aperture Radar (IFSAR) is a technique that allows an automated way to carry out terrain mapping. IFSAR is carried out by first generating a SAR image pair from two antennas that are spatially separated. The phase difference between the SAR image pair is proportional to the topography. After registering the SAR images, the difference in phase in each pixel is extracted to generate an interferogram. Since the phase can only be measured within 2pi radians, phase unwrapping is carried out to extract the absolute phase for each pixel that will be proportional to the local height. While IFSAR algorithm is typically applied to measurement data, it is useful to develop an IFSAR simulator to develop a better understanding of the IFSAR technique. The IFSAR simulator can be used in choosing system parameters, experimenting with processing procedures and mission planning. In this paper we will present an IFSAR simulation methodology to simulate the interferogram based on the shooting and bouncing ray (SBR) technique. SBR is a standard ray-tracing technique used to simulate scattering from large, complex targets. SBR is carried out by shooting rays at the target or scene. At the exit point of each ray, a ray-tube integration is done to find its contribution to the total field. A fast algorithm has been developed for the SBR for simulating SAR images of complex targets. In the IFSAR simulation, we build upon the fast SAR simulation technique. Given the antenna pair configuration, radar system parameters and the geometrical description of the scene, we first simulate two SAR images from each antenna. After post processing the two SAR images, we generate an interferogram. Phase unwrapping is then performed on the interferogram to arrive at the desired terrain map. We will present results from the SBR-based IFSAR simulator. The results will include terrain map reconstruction of urban environments. The reconstruction will be compared to the ground truth to examine the fidelity of the simulation. We will also investigate the effect of multi-bounce scattering in urban environments on phase unwrapping and reconstruction.

Houshmand, Bijan↗
DOE OSTI2024

Long-term effects of cycle time and volume exchange ratio on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) production from food waste digestate by Haloferax mediterranei cultivated in sequencing batch reactors for 450 days

Food waste digestate was fed into a sequencing batch reactor (SBR) for Haloferax mediterranei (HM) to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). This SBR was operated uninterruptedly for 450 days to test its stability, during which the cycle time and volume exchange ratio were varied to understand their impacts on the PHBV fermentation performance under ranged organic loading rates (OLR). Results showed that 1) PHBV productivity was proportional to OLR of food waste digestate; 2) substrate and product inhibitions were two limiting factors constraining substrate utilization and PHBV yields; 3) PHBV titer was dependent on the hydraulic retention time of the SBR while a volume exchange ratio lower than 0.5 is unfavorable due to the product inhibitor accumulation. Furthermore, this study for the first time demonstrated that the long-term stability of food waste-fed PHBV production by HM and revealed that inhibition effects could be barriers in SBR limiting the full-scale application of the technology.

09 BIOMASS FUELS↗
NASA NTRS1989

High-frequency RCS of open cavities with rectangular and circular cross sections

The radar cross-section (RCS) analysis of open-ended cavities with rectangular and circular cross sections is carried out using the waveguide modal approach and the shooting-and-bouncing ray (SBR) approach. For a cavity opening on the order of ten wavelengths or larger, the comparison between the two approaches is excellent. It is also observed that at lower frequencies the SBR results deviate from the more accurate modal results. On the other hand, the SBR approach allows for greater flexibility in geometrical modeling, and can be applied to problems where waveguide modes cannot be easily found. SBR results for an offset rectangular cavity and a circular cavity with rounded endplate are presented.

Ling, Hao↗
NASA NTRS1984

Effect of space environment on space-based radar phased-array antenna (A0133)

Kapton polyimide film was selected as the baseline material for the Grumman spce based radar (SBR) concept. To gain the requisite confidence for long-term service durability, it is desirable to subject material specimens as well as a portion of the SBR antenna directly to the combined space environment and compare property degradation to that caused by laboratory simulation. The overall objective of this program is to evauate the effect of the space environment on polymeric materials currently being considered for the Grumman SBR Phased-Array Antenna. Degradation mechanisms caused by thermal cycling, ultraviolet and charged-particle irradiation, applied load, and high-voltage plasma interaction will be evaluated. The experiment occupies a 6-in.-deep end corner tray located on the space end of the Long Duration Exposure Facility and consists of both passive and active parts. The passive part addresses the effect of environment and stress on the dimensional stability spliced and continuous Kapton, both plain and reinforced. The active part will study the interaction of high voltage and low-Earth-orbit plasma.

Delasi, R. J.↗
NASA NTRS1990

Spent-beam refocusing analysis and multistage depressed collector design for a 75-W, 59- to 64-GHz coupled-cavity traveling-wave tube

A computational design technique for coupled-cavity tubes (TWTs) equipped with spent-beam refocusers (SBRs) and multistage depressed collectors (MDCs) is described. A large-signal multidimensional computer program was used to analyze the TWT-SBR performance and to generate the spent-beam models used for MDC design. The results of a design involving a 75-W, 59 to 64 GHz TWT are presented. The SBR and MDC designs are shown, and the computed TWT, SBR, and MDC performances are described. Collector efficiencies in excess of 94 percent led to projected overall TWT efficiencies in the 40-percent range.

Wilson, Jeffrey D.↗
NASA NTRS1984

Proposed system design for a 20 kW pulsed electrothermal thruster

A conceptual design is presented for a Pulsed Electrothermal (PET) propulsion system for the Air Force Space Based Radar satellite, which has a mass of 7000 kg. The proposed system boosts the SBR satellite from 150 n.m. to 600 n.m. with a 4 deg plane change, for a total mission Delta v of 1 km/sec. Satellite power available is 50 kW, and 45 kW are used to drive two water-injected 20 kW PET thrusters, delivering 5.6 N thrust to the SBR at 1000 seconds specific impulse. The predicted mission trip time is 15 days. The proposed system consumes 850 kg of water propellant, stored in a central tank and injected with pressurized helium. Component mass estimates based on space-qualified hardware are presented for the propellant handling, power conditioning and thruster subsystems. The estimated total mass is 400 kg and the propulsion system specific mass is alpha = 10 kg/kW. The proposed system efficiency of 0.62 at 1000 seconds specific impulse is supported by experimental performance measurements.

Burton, R. L.↗
NASA NTRS1985

Primary propulsion of electrothermal, ion and chemical systems for space-based radar orbit transfer

An orbit transfer mission concept has been studied for a Space-Based Radar (SBR) where 40 kW required for radar operation is assumed available for orbit transfer propulsion. Arcjet, pulsed electrothermal (PET), ion, and storable chemical systems are considered for the primary propulsion. Transferring two SBR per shuttle flight to 1112 km/60 deg using electrical propulsion systems offers an increased payload at the expense of increased trip time, up to 2000 kg each, which may be critical for survivability. Trade offs between payload mass, transfer time, launch site, inclination, and height of parking orbits are presented.

Wang, S. Y.↗
NASA NTRS1985

Primary propulsion of electrothermal, ion, and chemical systems for space-based radar orbit transfer

An orbit transfer mission concept has been studied for a Space-Based Radar (SBR) where 40 kW required for radar operation is assumed available for orbit transfer propulsion. Arcjet, pulsed electrothermal (PET), ion, and storable chemical systems are considered for the primary propulsion. Transferring two SBR per shuttle flight to 1112 km/60 deg using eiectrical propulsion systems offers an increased payload at the expense of increased trip time, up to 2000 kg each, which may be critical for survivability. Trade offs between payload mass, transfer time, launch site, inclination, and height of parking orbits are presented.

Wang, S.-Y.↗
NASA NTRS1990

Soil bed reactor work of the Environmental Research Lab. of the University of Arizona in support of the research and development of Biosphere 2

Research at the Environmental Research Lab in support of Biosphere 2 was both basic and applied in nature. One aspect of the applied research involved the use of biological reactors for the scrubbing of trace atmospheric organic contaminants. The research involved a quantitative study of the efficiency of operation of Soil Bed Reactors (SBR) and the optimal operating conditions for contaminant removal. The basic configuration of a SBR is that air is moved through a living soil that supports a population of plants. Upon exposure to the soil, contaminants are either passively adsorbed onto the surface of soil particles, chemically transformed in the soil to usable compounds that are taken up by the plants or microbes as a metabolic energy source and converted to CO2 and water.

Frye, Robert↗