Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEA WATER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Advancing Sustainability in Data Centers: Evaluation of Hybrid Air/Liquid Cooling Schemes for IT Payload Using Sea Water

Abstract-The growth in cloud computing, Big Data, AI and high-performance computing (HPC) necessitate the deployment of additional data centers (DC's) with high energy demands. The unprecedented increase in the Thermal Design Power (TDP) of the computing chips will require innovative cooling techniques. Furthermore, DC's are increasingly limited in their ability to add powerful GPU servers by power capacity constraints. As cooling energy use accounts for up to 40% of DC energy consumption, creative cooling solutions are urgently needed to allow deployment of additional servers, enhance sustainability and increase energy efficiency of DC's. The information in this study is provided from Start Campus' Sines facility supported by Alfa Laval for the heat exchanger and CO 2 emission calculations. The study evaluates the performance and sustainability impact of various data center cooling strategies including an air-only deployment and a subsequent hybrid air/water cooling solution all utilizing sea water as the cooling source. Here we evaluate scenarios from 3 MW to 15+1 MW of IT load in 3 MW increments which correspond to the size of heat exchangers used in the Start Campus' modular system design. This study also evaluates the CO 2 emissions compared to a conventional chiller system for all the presented scenarios. Results indicate that the effective use of the sea water cooled system combined with liquid cooled systems improve the efficiency of the DC, plays a role in decreasing the CO 2 emissions and supports in achieving sustainability goals.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

The NASA Floater: 15MW Ultra-Light Concrete Hull with Sea-Water Ballast Tuned Mass Damper

In this project, UMaine developed the VolturnUS+ platform; a new 15MW+ ultra-light-weight, corrosion-resistant, concrete floating offshore wind turbine (FOWT) equipped with novel patent pending Heel Tank damping technology. UMaine developed this damping technology to reduce FOWT motions using existing onboard sea-water ballast, which has been integrated into the concrete cruciform hull resulting in reduced platform rigid body motions leading to a lighter hull, increased turbine performance, and a lower LCOE.

17 WIND ENERGY↗
DOE OSTI2021

Reactions of self-healing agents and the chemical binding of aggressive ions in sea water: Thermodynamics and kinetics

New self-healing agents that can chemically bind seawater ions invading cracked cementitious materials were proposed. The potential of self-healing and binding of seawater ions were investigated by thermodynamic modeling. It was found that CaO-NaAlO{sub 2} and CaO-metakaolin agents can have Cl{sup −}, SO{sub 4}{sup 2−} and Mg{sup 2+} chemically bound by reacting with sea water to form Friedel's salt, Kuzel's salt, ettringite and hydrotalcite. The removal of Cl{sup −} from seawater firstly increased and then decreased with the increase of Ca/Al molar ratio in both agents, while the removal of Mg{sup 2+} and SO{sub 4}{sup 2−} were hardly influenced and approximated 100%. Because NaAlO{sub 2} dissolves and releases Al(OH){sub 4}{sup −} rapidly, precipitates binding Cl{sup −}, SO{sub 4}{sup 2−} and Mg{sup 2+} were formed fast. In comparison, the reaction of metakaolin binding aggressive ions occurred after 3 days. Because of the faster reaction and the capacity to make [Cl{sup −}]/[OH{sup −}] lower in the solution, CaO-NaAlO{sub 2} would be more efficient for self-healing and mitigating reinforcement corrossion than CaO-metakaolin.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Sustainable ammonia synthesis from nitrogen wet with sea water by single-step plasma catalysis

Ammonia synthesis at ambient conditions employing intermittent distributed green sources of energy and feedstocks is globally sought to replace the centralized Haber-Bosch (H-B) process operating at high temperature and pressure. We report herein for the first time an effective and sustainable ammonia synthesis pathway from N 2 wet with seawater vapor over spherical SiO 2 and M/SiO 2 (M: Ag, Cu, and Co) catalysts driven by non-thermal plasma (NTP). Experimental results indicate that the presence of a catalyst is required for ammonia production from seawater vapor and N 2 . The Co/SiO 2 catalyst delivered the highest ammonia synthesis rate (r NH 3 ) of 3.7 mmol g cat -1 h -1 and energy yield of 3.2 g NH 3 ∙kW -1 ∙h -1 at a relatively low input power of 2 W. The extraction of H atoms from H 2 O molecules plays an important role in the ammonia synthesis from seawater vapor. Finally, this work unfolds a novel platform for the subsequent optimization of sustainable ammonia production from endless resources such as seawater and N 2 through catalytic non-thermal plasma potentially powered by renewable sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-performance corrosion-resistant high-entropy alloys

This disclosure provides alloy compositions comprising the main constituent elements iron, nickel, cobalt, molybdenum, and chromium. In one embodiment, the alloy comprises 10.0 to 30.0 wt % iron; 30.0 to 60.0 wt % nickel; 10.0 to 25.0 wt % cobalt; 1.0 to 15.0 wt % molybdenum; 15.0 to 25.0 wt % chromium by weight; where the sum of iron and nickel is at least 50 wt %; and, where the balance comprises minor elements, the total amount of minor elements being about 5% or less by weight. The alloy compositions have use as coatings to protect metals and alloys from corrosion in extreme environments where corrosion is a major concern such as with exposure to sea water or sea water with CO 2 .

Hawk, Jeffrey A.↗
DOE OSTI2021

Iron speciation in blast furnace slag cements

Slag-containing pastes and concretes were analysed by element-specific synchrotron-based techniques to determine the speciation of iron on crushed materials through spatially resolved micro-spectroscopic studies. The investigated cement samples were hydrated either in the laboratory, or exposed to river or sea water. Metallic iron, along with minor proportions of iron sulphide and magnetite was detected in the laboratory sample. Iron sulphide, goethite, and siliceous hydrogarnet were discovered in the blended slag cements hydrated in contact with river water for up to 7 years. In contrast, no Fe(0) was observed in blended concretes exposed to sea water. Instead, iron sulphide, iron(II)-hydroxide and -oxide, hematite, magnetite, siliceous hydrogarnet, and goethite were detected as well as ilmenite (FeTiO{sub 3}) in the aggregates. The strong acceleration of Fe oxidation in samples exposed to sea water and the long-term passivation observed in the other samples indicate comparable processes as those occurring on steel bars.

36 MATERIALS SCIENCE↗
DOE OSTI2020

System and method for cooling using a heat exchanger having a membrane

A heat exchanger that includes a membrane of graphene oxide is disclosed, as is a heat exchange system employing such a heat exchanger. The heat exchanger permits the use of water from non-traditional sources, such as waste water, brackish and sea water, in a cooling loop. Clean water and sensible heat permeate through the membrane, simultaneously cooling and purifying water in the cooling loop.

42 ENGINEERING↗
DOE OSTI2024

The Feasibility of Incorporating Engineering within SWAC and OTEC That Would Enhance Open-Ocean Aquaculture

The U.S. Department of Energy transmits to Congress the following Report to Congress on the Feasibility of Incorporating Engineering within Sea Water Air Conditioning (SWAC) and Ocean Thermal Energy Conversation (OTEC) that would Enhance Open-Ocean Aquaculture, as requested in the 2022 House Committee on Appropriations Report 117-98, an update to the previously requested Report on Ocean Thermal Energy Conversion (OTEC) and Sea Water Air Conditioning (SWAC) systems in noncontiguous states and U.S. territories, as requested in the 2021 House Committee on Appropriations Report 116-449, and more recently requested again in the 2023 House Committee on Appropriations Report 117-394.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Modeling the mechanisms of conifer mortality under seawater exposure

Summary Relative sea level rise (SLR) increasingly impacts coastal ecosystems through the formation of ghost forests. To predict the future of coastal ecosystems under SLR and changing climate, it is important to understand the physiological mechanisms underlying coastal tree mortality and to integrate this knowledge into dynamic vegetation models. We incorporate the physiological effect of salinity and hypoxia in a dynamic vegetation model in the Earth system land model, and used the model to investigate the mechanisms of mortality of conifer forests on the west and east coast sites of USA, where trees experience different form of sea water exposure. Simulations suggest similar physiological mechanisms can result in different mortality patterns. At the east coast site that experienced severe increases in seawater exposure, trees loose photosynthetic capacity and roots rapidly, and both storage carbon and hydraulic conductance decrease significantly within a year. Over time, further consumption of storage carbon that leads to carbon starvation dominates mortality. At the west coast site that gradually exposed to seawater through SLR, hydraulic failure dominates mortality because root loss impacts on conductance are greater than the degree of storage carbon depletion. Measurements and modeling focused on understanding the physiological mechanisms of mortality is critical to reducing predictive uncertainty.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Crustal Deformation and Gravitational Effects From Dynamic Ocean Mass Redistribution Impact Projected Sea‐Level Change

As the climate warms, associated changes in ocean dynamics will redistribute sea‐water mass within the ocean, contributing to relative sea‐level change. This mass redistribution will cause additional sea‐level changes due to gravitational self‐attraction, deformation of the solid Earth, and shifts in the Earth's rotation axis (GRD), which are not incorporated in sea‐level projections. Using CMIP6 climate model output, we quantify relative sea‐level changes induced by GRD from ocean‐dynamic mass loading through 2100. These effects act to amplify projected ocean‐dynamic sea‐level patterns, causing sea‐level rise in coastal regions, particularly along wide continental shelves and at high latitudes. On average, the magnitude of such GRD‐induced sea‐level change is equivalent to ∼15% of the signal due to dynamic ocean mass redistribution. Although our results show substantial inter‐model spread, they reveal that GRD‐induced relative sea‐level changes from ocean mass redistribution represent a non‐negligible component of regional sea‐level change and should be considered in projections.

58 GEOSCIENCES↗
DOE OSTI2023

Dihydroxyterephthalate—A Trojan Horse PET Counit for Facile Chemical Recycling

Abstract Here, low‐energy poly(ethylene terephthalate) (PET) chemical recycling in water: PET copolymers with diethyl 2,5‐dihydroxyterephthalate (DHTE) undergo selective hydrolysis at DHTE sites, autocatalyzed by neighboring group participation, is demonstrated. Liberated oligomeric subchains further hydrolyze until only small molecules remain. Poly(ethylene terephthalate‐ stat ‐2,5‐dihydroxyterephthalate) copolymers were synthesized via melt polycondensation and then hydrolyzed in 150–200 °C water with 0–1 wt% ZnCl 2 , or alternatively in simulated sea water. Degradation progress follows pseudo‐first order kinetics. With increasing DHTE loading, the rate constant increases monotonically while the thermal activation barrier decreases. The depolymerization products are ethylene glycol, terephthalic acid, 2,5‐dihydroxyterephthalic acid, and bis(2‐hydroxyethyl) terephthalate dimer, which could be used to regenerate virgin polymer. Composition‐optimized copolymers show a decrease of nearly 50% in the Arrhenius activation energy, suggesting a 6‐order reduction in depolymerization time under ambient conditions compared to that of PET homopolymer. This study provides new insight to the design of polymers for end‐of‐life while maintaining key properties like service temperature and mechanical properties. Moreover, this chemical recycling procedure is more environmentally friendly compared to traditional approaches since water is the only needed material, which is green, sustainable, and cheap.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Water transport through monolayer fullerene membrane

Water transport through nanoporous materials is important in water treatment, desalination, and nanofiltration. Two-dimensional (2D) membranes such as porous graphene have been explored for high-permeance water transport. However, water transport through a new class of 2D membranes based on two-dimensional covalently linked fullerene monolayers has not been fully explored. Here we use classical molecular dynamics simulations to investigate both vapor and liquid water transport through a monolayer fullerene membrane. We find that a quasi-tetragonal phase fullerene membrane possesses the right pore size and geometry that allows fast water vapor transport (∼ 50 g m −2 day −1 Pa −1 ) and water liquid transport (∼ 2.0 g m −2 day −1 Pa −1 ). Furthermore, simulation of sea water transport through the fullerene membrane shows 100 % salt rejection. The much faster vapor transport rate is attributed to the funnel-shaped pore and the optimal size that allows free rotation of water molecules permeating through, while the slower liquid transport is due to the need to desolvate a water molecule to break its hydrogen-bond network across the hydrophobic pore. This work shows the great potential of using monolayer fullerene membranes as 2D membranes for fast and selective water transport.

Desalination↗
DOE OSTI2021

Comparative Genomic Analysis of Labrenzia aggregata (Alphaproteobacteria) Strains Isolated From the Mariana Trench: Insights Into the Metabolic Potentials and Biogeochemical Functions

Hadal zones are marine environments deeper than 6,000 m, most of which comprise oceanic trenches. Microbes thriving at such depth experience high hydrostatic pressure and low temperature. The genomic potentials of these microbes to such extreme environments are largely unknown. Here, we compare five complete genomes of bacterial strains belonging to Labrenzia aggregata ( Alphaproteobacteria ), including four from the Mariana Trench at depths up to 9,600 m and one reference from surface seawater of the East China Sea, to uncover the genomic potentials of this species. Genomic investigation suggests all the five strains of L. aggregata as participants in nitrogen and sulfur cycles, including denitrification, dissimilatory nitrate reduction to ammonium (DNRA), thiosulfate oxidation, and dimethylsulfoniopropionate (DMSP) biosynthesis and degradation. Further comparisons show that, among the five strains, 85% gene functions are similar with 96.7% of them encoded on the chromosomes, whereas the numbers of functional specific genes related to osmoregulation, antibiotic resistance, viral infection, and secondary metabolite biosynthesis are majorly contributed by the differential plasmids. A following analysis suggests the plasmidic gene numbers increase along with isolation depth and most plasmids are dissimilar among the five strains. These findings provide a better understanding of genomic potentials in the same species throughout a deep-sea water column and address the importance of externally originated plasmidic genes putatively shaped by deep-sea environment.

Zhong, Haohui↗
DOE OSTI2025

Ice nucleating particle concentrations in the Arctic during MOSAiC 2020

This data set contains ice nucleating particle (INP) measurements, using Colorado State University’s (CSU) Ice Spectrometer (IS) of samples collected during the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC) field campaign. Samples were collected from five different media: aerosol filters, meltwater, ice cores, snow pits, and bulk sea water (BSW).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Larval connectivity for European green crab management in the Salish Sea and surrounding waters

The presence of invasive species is a growing concern in coastal marine ecosystems because of their adverse effects on biodiversity. The European green crab Carcinus maenas (EGC) is a small crab inhabiting inshore areas. Although it is native to the Northeast Atlantic Ocean and Baltic Sea, its distribution has expanded to North America, where it is an invasive species. Its main food sources are small invertebrate species that support valuable fisheries in the USA. The first presence of EGC in northern Washington was observed around 20 yr ago, along the Pacific Coast of the USA. Recently, EGC has been detected throughout the Salish Sea (Washington, USA, and British Columbia, Canada) wherein spread dynamics are unknown. The overall distribution of EGC is mainly driven by larval dispersal and, in the Salish Sea and surrounding waters, the assessment of EGC population dynamics is essential to understand its migration patterns and prevent its future expansion. To investigate the dispersal patterns of EGC larvae, a larval dispersal model was developed which couples a regional model of hydrodynamic circulation with an individual-based model of ichthyoplankton dynamics. Simulations were performed over 9 yr (2013-2022) to analyze average larval transport trends in the Salish Sea and surrounding waters, interannual variability of EGC larval connectivity, and the influence of larval behavior on connectivity patterns. Lastly, areas were identified to inform invasive species management moving forward. The prediction of likely sources and settlement locations of EGC larvae from the model will help improve the management of the population in the Salish Sea and surrounding waters.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Engineering Nannochloropsis oceanica for the production of diterpenoid compounds

Abstract Photosynthetic microalgae like Nannochloropsis hold enormous potential as sustainable, light‐driven biofactories for the production of high‐value natural products such as terpenoids. Nannochloropsis oceanica is distinguished as a particularly robust host with extensive genomic and transgenic resources available. Its capacity to grow in wastewater, brackish, and sea waters, coupled with advances in microalgal metabolic engineering, genome editing, and synthetic biology, provides an excellent opportunity. In the present work, we demonstrate how N. oceanica can be engineered to produce the diterpene casbene—an important intermediate in the biosynthesis of pharmacologically relevant macrocyclic diterpenoids. Casbene accumulated after stably expressing and targeting the casbene synthase from Daphne genkwa (DgTPS1) to the algal chloroplast. The engineered strains yielded production titers of up to 0.12 mg g −1 total dry cell weight (DCW) casbene. Heterologous overexpression and chloroplast targeting of two upstream rate‐limiting enzymes in the 2‐C‐methyl‐ d ‐erythritol 4‐phosphate pathway, Coleus forskohlii 1‐deoxy‐ d ‐xylulose‐5‐phosphate synthase and geranylgeranyl diphosphate synthase genes, further enhanced the yield of casbene to a titer up to 1.80 mg g −1 DCW. The results presented here form a basis for further development and production of complex plant diterpenoids in microalgae.

Du, Zhi‐Yan↗
DOE OSTI2023

The combined effect of temperature and seawater on the compression properties of carbon fiber vinyl ester composites for sandwich structures

For naval applications, composite sandwich structures are of significant interest, and are often manufactured using thin (2 to 4 mm) composite facings made from carbon or glass fiber reinforcement, attached to a thick (25 to 50 mm) section of PVC cellular foam or balsa wood-based core materials using a suitable polymeric resin. In the present study, we focus on the hygrothermal effect on the fiber-dominated compression properties of carbon fiber reinforced vinyl ester resin based polymeric composite (CF/VE), used as “skin” for a polymeric composite sandwich material. Hygrothermal conditioning is achieved by saturating samples in simulated seawater at 40°C. Compression properties are evaluated for coupons extracted along warp and fill undergoing- no conditioning, conditioning till saturation (up to 6 months), and long-term conditioning (2 years). Sea-water saturation yields in up to 12% drop in compression strength with a further 3–4% drop resulting from long-term conditioning. No statistically significant modulus degradation is noticed due to short or long-term hygrothermal exposure. The failure mechanism of the warp extracted coupon, which fails in a splitting failure mode originating due to the delamination between the 0/90 interface, or the fill extracted coupon, which fails due to the instability caused by tow micro-buckling, remains unchanged due to combined exposure (short or long-term) of seawater and temperature. The loss in strength is attributed to the degradation of the fiber-matrix interface, which is validated via conducting single fiber push-in tests with a nominal diameter of 7 micron for conditioned and unconditioned coupons.

Engineering↗