Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEISMIC EFFECTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Global seismic effects of basin-forming impacts

A Lagrangian computer program is used to study the effects of large impacts on planetary surfaces. More specifically, the global seismic effects for cratering energies of 10 to the 24th and 10 to the 25th J between the Copernicus and Imbrium lunar events are investigated. The phenomenologies for assumed solid and molten planetary interiors are compared. The main results of this investigation are: (1) far-field effects are found to be largely independent of cratering mechanisms, (2) antipodal seismic effects, which are of substantial magnitude, are greatly enhanced by focusing, (3) the most violent activity takes place at significant depth, (4) seismic effects are more pronounced for a molten planet than for a solid one, and (5) tensile failure may occur at depths of tens of kilometers beneath the antipode, or over the entire surface at shallower depths. These results suggest that the unusual terrains antipodal to large planetary basins may have been greatly modified by seismicity generated by the basin-forming impacts, and that the impacts may have brecciated the entire lithospheres of the terrestrial planets as the lithospheres formed and thickened

Hughes, H. G.↗

Investigations of acoustic-seismic effects at long range - Early-arriving seismic waves from Apollo 16

A reasonably comprehensive technical effort is described dealing with the investigations of acoustically generated seismic waves of Apollo 16 and Apollo 17 origin along the eastern seabord of the United States. This expanded effort is a continuation of earlier, rather successful detections of rocket-generated seismic disturbances on Skidaway Island, Georgia. The more recent effort has yielded few positive results other than a recording of an early-arriving seismic wave from Apollo 16 that was detected in Jacksonville. Evaluation of the negative results obtained in the Fort Monmouth area, with earlier studies of infrasound, local weather conditions, and geology, could be advantageous in the process of trying to gain a better insight into the acoustic-seismic resonance mechanism requiring phase-velocity matching at the atmosphere-ground interface.

Dalins, I.↗

The Seismic Effect of Impacts on Asteroid Surface Morphology: Early Modeling Results

In recent years, spacecraft observations of asteroids 951 Gaspra, 243 Ida, 253 Mathilde, and 433 Eros have shown the overriding dominance of impact processes with regard to the structure and appearance of these small, irregular bodies. One currently unanswered question is: to what degree does seismic shaking from impacts affect the surface morphology of these bodies? Through detailed modeling, we begin to address this question.

Richardson, J. E.↗

Seismic effects from major basin formation on the Moon and Mercury

Grooved and hilly terrains are reported which occur at the antipode of major basins on the Moon (Imbrium, Orientale) and Mercury (Caloris). Order-of-magnitude calculations, for an Imbrium-size impact on the Moon, indicate P-wave-induced surface displacements of 10 m at the basin antipode that would arrive prior to secondary ejecta. Comparable surface waves are reported which would arrive subsequent to secondary ejecta impacts and would increase in magnitude as they converge at the antipode. Other seismically induced surface features include: subdued, furrowed crater walls produced by landslides and concomitant secondary impacts; emplacement and leveling of light plains units owing to seismically induced "fluidization" of slide material; knobby, pitted terrain around old basins from enhancement of seismic waves in ancient ejecta blankets; and the production and enhancement of deep-seated fractures that led to the concentration of farside lunar maria in the Apollo-Ingenii region.

Schultz, P. H.↗

Seismic effects from major basin formations on the moon and Mercury

Grooved and hilly terrains occur at the antipode of major basins on the moon (Imbrium, Orientale) and Mercury (Caloris). Such terrains may represent extensive landslides and surface disruption produced by impact-generated P-waves and antipodal convergence of surface waves. Order-of-magnitude calculations for an Imbrium-size impact on the moon indicate P-wave-induced surface displacements of 10 m at the basin antipode that would arrive prior to secondary ejecta. Comparable surface waves would arrive subsequent to secondary ejecta impacts beyond 1000 km and would increase in magnitude as they converge at the antipode. Other seismically induced surface features include: subdued, furrowed crater walls produced by landslides and concomitant secondary impacts; emplacement and leveling of light plains units owing to seismically induced 'fluidization' of slide material; and perhaps the production and enhancement of deep-seated fractures that led to the concentration of farside lunar maria in the Apollo-Ingenii region.

Schultz, P. H.↗

Seismic effects on the rotational dynamics of the earth and its gravitational field

The effects of earthquakes on the rotational motion of the earth were studied. The connection between the fault parameters and the corresponding changes in the moments and products of inertia were analytically developed. The reciprocal theorem of elasticity and Volterra's formula were applied as well as the displacement and stress fields for the second degree static response of the earth model being used. The numerical results of the investigation yield the magnitude and direction of the pole shift as well as the change in the length of the day. The changes in the second degree coefficients of the geopotential were computed. Source parameters corresponding to the Alaskan earthquake on March 28, 1964 were used to generate numerical results.

Sanchez, B. V.↗

Lunar and Planetary Science XXXV: Asteroids, Meteors, and Comets

The session "Asteroids, Meteors, and Comets" contained the following reports:Ejecta Generation and Redistribution on 433 Eros: Modeling Ejecta Launch Conditions; Macroscopic Voids in Small Asteroids: Effects of Cohesion; The Seismic Effect of Impacts on Asteroid Surface Morphology: Early Modeling Results; Photometric Studies of Eros from NEAR Data; Quantitative Aspects of Space Weathering: Implications for Regolith Breccia Meteorites and Asteroids; Diversity of Types of Hydrated Minerals on C-Class Asteroids; Mineralogical Variations Among High Albedo E-Type Asteroids: Implications for Asteroid Igneous Processes; Multi-Wavelength Observations of 2100 Ra-Shalom: Radar and Lightcurves; What are the P-type Asteroids Made Of?; Sodium Overabundance in Meteoroids from Meteor Spectroscopy; Migration Processes and Volatiles Inventory to the Inner Planets; Characterization of the Surface Properties of MUSES-C/Hayabusa Spacecraft Target; Asteroid 25143 Itokawa; and Sample Return Science by Hayabusa Near-Earth Asteroid Mission.

Source record↗

Comparisons of Mercury and the moon; Proceedings of the Conference, Houston, Tex., November 15-17, 1976

Papers are presented outlining various comparisons of Mercury and the moon. Specific topics include the planetary magnetism and the interiors of the moon and Mercury, the relationship between crustal tectonics and internal evolution, global tectonics, the origin and relative age of lunar and Mercurian intercrater plains, and the relative preservation states of secondary craters. Comparisons are also discussed between lunar and Mercurian rayed craters, large impact structures, isostasy and average crustal viscosity. Attention is given to global seismic effects of basin-forming impacts, interpretations of optical observations of Mercury and the moon, and the production of simple molecules on the surface of Mercury.

Simonds, C. H.↗

Meteoroid environment near the Earth-Moon system

We undertook a research program to investigate the properties of small objects crossing the orbit of the Earth-Moon system using a unique set of data obtained during the Apollo lunar landing missions with a network of seismic stations on the surface of the Moon. The primary objectives of the study were to find out the nature of these objects, whether they were of cometary or asteroidal origin based on their orbital distributions and seismic effects upon impacts, and then to infer the role these small objects play in the evolution of the solar system. In this final technical report, we briefly summarize the results of this study. Detailed results of the study have been published in a series of papers and a dissertation, which are listed in the PUBLICATIONS section. Abstracts of the published papers and the dissertation are attached as an appendix.

Nakamura, Yosio↗

A broad-band microseismometer for planetary operations

There has recently been renewed interest in the development of instrumentation for making measurements on the surface of Mars. This is due to the Mars Environmental Survey (MESUR) Mission, for which approximately 16 small, long-lived (2-10 years), relatively inexpensive surface stations will be deployed in a planet-wide network. This will allow the investigation of processes (such as seismology and meteorology) which require the simultaneous measurement of phenomena at many widely spaced locations on the surface over a considerable length of time. Due to the large number of vehicles involved, the mass, power, and cost of the payload will be severely constrained. A seismometer has been identified as one of the highest priority instruments in the MESUR straw-man payload. The requirements for an effective seismic experiment on Mars place a number of constraints on any viable sensor design. First, a large number of sensors must be deployed in a long-lived global network in order to be able to locate many events reliably, provide good spatial sampling of the interior, and increase the probability of seismic detection in the event of localized seismicity and/or high attenuation. From a practical standpoint, this means that individual surface stations will necessarily be constrained in terms of cost, mass, and power. Landing and thermal control systems will probably be simple, in order to minimize cost, resulting in large impact accelerations and wide daily and seasonal thermal swings. The level of seismic noise will determine the maximum usable sensitivity for seismometer. Unfortunately, the ambient seismic noise level for Mars is not well known. However lunar seismic noise levels are several orders of magnitude below that of the Earth. Sensitivities on the order of 10(exp -11)g over a bandwidth of .04 to 20 Hz are thought to be necessary to fulfill the science objectives for a seimometer placed on the Martian surface. Silicon micromachined sensor technology offers techniques for the fabrication of monolithic, robust, compact, lower power and mass accelerometers. Conventional micro-machined accelerometers have been developed and are commercially available for high frequency and large acceleration measurements. The new seismometer we are developing incorporates certain principles of conventional silicon micromachined accelerometer technology. However, currently available silicon micromachined sensors offer inadequate sensitivity and bandwidth for the Mars seismometer application. Our implementation of an advanced silicon micromachined seismometer is based on principles recently developed at JPL for high-sensitivity position sensor technology.

Banerdt, W. B.↗

A Stochastic Cratering Model for Asteroid Surfaces

The observed cratering records on asteroid surfaces (four so far: Gaspra, Ida, Mathilde, and Eros [1-4]) provide us with important clues to their past bombardment histories. Previous efforts toward interpreting these records have led to two basic modeling styles for reproducing the statistics of the observed crater populations. The first, and most direct, method is to use Monte Carlo techniques [5] to stochastically populate a matrix-model test surface with craters as a function of time [6,7]. The second method is to use a more general, parameterized approach to duplicate the statistics of the observed crater population [8,9]. In both methods, several factors must be included beyond the simple superposing of circular features: (1) crater erosion by subsequent impacts, (2) infilling of craters by impact ejecta, and (3) crater degradation and era- sure due to the seismic effects of subsequent impacts. Here we present an updated Monte Carlo (stochastic) modeling approach, designed specifically with small- to medium-sized asteroids in mind.

Richardson, J. E.↗

Investigation of seismicity and related effects at NASA Ames-Dryden Flight Research Facility, Computer Center, Edwards, California

This report discusses a geological and seismological investigation of the NASA Ames-Dryden Flight Research Facility site at Edwards, California. Results are presented as seismic design criteria, with design values of the pertinent ground motion parameters, probability of recurrence, and recommended analogous time-history accelerograms with their corresponding spectra. The recommendations apply specifically to the Dryden site and should not be extrapolated to other sites with varying foundation and geologic conditions or different seismic environments.

Cousineau, R. D.↗

The Effect of Redox Conditions on Seismic Waves in Iron-Bearing Olivine: Implications for Understanding Planetary Interiros Through Seismilogy

Seismic data, inclusive of velocities and attenuation, can be utilized to elucidate the physical state of planetary interiors]. However, numerous micromechanical factors have been either experimentally demonstrated, or theoretically considered, to affect the propagation and dissipation of seismic energy within crystalline solids - including, but not limited to, changes in grain size, temperature, melt fraction, pressure and dislocation density. Thus, observed variations in seismic wave speeds and attenuation may be used to ultimately ‘map’ variations in physical properties, such as those listed above, within planetary bodies. But, in order to complete a successful inversion of seismic data into representations of physical properties, a first requirement is to obtain a fundamental laboratory based understanding of how each of these possible factors individually influences seismic waves. Here we conduct an experimental study with the initial objective to further understand one of the most commonly invoked, yet least studied, mechanisms that could alter intrinsic seismic wave attenuation: water content (occurring as chemically-bound hydroxyl). The historical basis for determining the effect of water on seismic properties was established predominantly through analogy with large-strain creep experiments conducted on olivine under water-saturated conditions. While these deformation experiments routinely demonstrate a weakening of olivine in the presence of water, they represent a fundamentally different deformation regime in comparison to the microstrains experienced due to a passing seismic wave. Thus, in order to directly assess the effects of water on seismic properties, small-strain experiments are required. Substantially modified seismic properties in the presence of water have been observed previously at low strains and low frequencies, but only in a single exploratory study conducted under water-saturated conditions. Thus, to properly test the theoretical predictions we conducted a systematic study of the seismic properties of olivine using low-frequency torsional oscillation on aggregates containing varying concentrations of bound hydroxyl, for the first time at under saturated conditions.

Cline, C. J., II↗

Mass Wasting in Planetary Environments: Implications for Seismicity

On Earth, mass wasting events such as rock falls and landslides are well known consequences of seismic activity. Here we investigate the regional effects of seismicity in planetary environments with the goal of determining whether such surface features on the Moon, Mars, and Mercury could be triggered by fault motion.

seismicity↗

Co-Seismic Mass Displacement and its Effect on Earth's Rotation and Gravity

Mantle processes often involve large-scale mass transport, ranging from mantle convection, tectonic motions, glacial isostatic adjustment, to tides, atmospheric and oceanic loadings, volcanism and seismicity. On very short time scale of less than an hour, co-seismic event, apart from the "shaking" that is the earthquake, leaves behind permanent (step-function-like) displacements in the crust and mantle. This redistribution of mass changes the Earth's inertia tensor (and hence Earth's rotation in both length-of-day and polar motion), and the gravity field. The question is whether these effects are large enough to be of any significance. In this paper we report updated calculation results based on Chao & Gross. The calculation uses the normal mode summation scheme, applied to over twenty thousand major earthquakes that occurred during 1976-2002, according to source mechanism solutions given by the Harvard Centroid Moment Tensor catalog. Compared to the truly large ones earlier in the century, the earthquakes we study are individually all too small to have left any discernible signature in geodetic records of Earth rotation or global gravity field. However, their collective effects continue to exhibit an extremely strong statistical tendencies, conspiring to decrease J2 and J22 while shortening LOD, resulting in a rounder and more compact Earth. Strong tendency is also seen in the earthquakes trying to "nudge" the Earth rotation pole towards approx. 140 deg.E, roughly opposite to the observed polar drift direction. Currently, the Gravity Recovery And Climate Experiment (GRACE) is measuring the time-variable gravity to high degree and order with unprecedented accuracy. Our results show that great earthquakes such as the 1960 Chilean or 1964 Alaskan events cause gravitational field changes that are large enough to be detected by GRACE.

Chao, B. F.↗