Search NASA⌕ Search

SEARCH · Search NASA

Results for “SELENIUM 75”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Nuclear Data Sheets for A = 75

The experimental nuclear spectroscopic data for known nuclides of mass number 75 (Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Br, Kr, Rb, Sr) have been evaluated and presented together with Adopted properties for levels and γ rays. New high-spin data are available for {sup 75}Ga, and {sup 75}Rb; and lifetime data for high-spin states in {sup 75}Br and {sup 75}Kr. For ΔJ =1, M1+E2 transitions in two rotational bands in {sup 75}Kr, several B(E2)(W.u.) values are anomalously high, deviating by 2–3 σ values from currently accepted RUL(E2) = 300. In the opinion of the evaluators, there is need to remeasure level lifetimes and multipole mixing ratios in {sup 75}Kr to resolve this serious discrepancy. New precise single-particle transfer cross section data are available for {sup 75}Ga, {sup 75}Ge, {sup 75}As and {sup 75}Se from several different reactions (2009Ka06,2008Sc03); these data give information for occupancy of valence neutron orbitals in the ground states of target nuclides: {sup 76}Ge, {sup 76}Se and {sup 78}Se. No significant new data since the 1999 NDS for A = 75 have been reported for {sup 75}As and {sup 75}Se. No data are yet available for excited states in {sup 75}Co, {sup 75}Ni and {sup 75}Sr. For {sup 75}Fe, only the isotopic identification is made with one observed event. The radioactive decay schemes of {sup 75}Co and {sup 75}Ni are unknown while those for {sup 75}Rb and {sup 75}Sr are incomplete. This work supersedes the data presented in the previous NDS evaluation of A = 75 published by 1999Fa05.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

TU-AB-201-08: Rotating Shield High Dose Rate Brachytherapy with 153Gd and 75Se Isotopes

Purpose: To introduce rotating shield brachytherapy (RSBT) for different cancer sites with {sup 153}Gd and {sup 75}Se isotopes. RSBT is a form of intensity modulated brachytherapy, using shielded rotating catheters to provide a better dose distribution in the tumour while protecting healthy tissue. Methods: BrachySource, a Geant4-based Monte Carlo dose planning system was developed for investigation of RSBT with {sup 153}Gd and {sup 75}Se for different cancer sites. Dose distributions from {sup 153}Gd, {sup 75}Se and {sup 192}Ir isotopes were calculated in a 40 cm radius water phantom by using the microSelectron-v2 source model. The source was placed inside a cylindrical platinum shield with 1.3 mm diameter. An emission window coinciding with the active core of the source was created by removing half (180°) of the wall of the shield. Relative dose rate distributions of the three isotopes were simulated. As a proof of concept, a breast cancer patient originally treated with Mammosite was re-simulated with unshielded {sup 192}Ir and shielded {sup 153}Gd. Results: The source with the lowest energy, {sup 153}Gd, decreased the dose on the shielded side by 91%, followed by {sup 75}Se and {sup 192}Ir with 36% and 16% reduction at 1 cm from the source. The breast cancer patient simulation showed the ability of shielded {sup 153}Gd to spare the chest wall by a 90% dose reduction when only one emission window angle is considered. In this case, fully covering the PTV would require more delivery angles and the chest wall dose reduction would be less, however, the simulation demonstrates the potential of shielded {sup 153}Gd to selectively isolate organs at risk. Conclusion: Introducing {sup 153}Gd and {sup 75}Se sources combined with RSBT will allow escalation of dose in the target volume while maintaining low doses in radiation sensitive healthy tissue. Tailoring treatments to each individual patient by treating all parts of the tumour without over-irradiation of normal tissues will be possible. The author acknowledges partial support by the CREATE Medical Physics Research Training Network grant of the Natural Sciences and Engineering Research Council (Grant number: 432290), and the Quebec Fonds de recherche Nature et Technologies.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Modeling and Depletion Simulations for a High Flux Isotope Reactor Cycle with a Representative Experiment Loading

The purpose of this report is to document a high-fidelity VESTA/MCNP High Flux Isotope Reactor (HFIR) core model that features a new, representative experiment loading. This model, which represents the current, high-enriched uranium fuel core, will serve as a reference for low-enriched uranium conversion studies, safety-basis calculations, and other research activities. A new experiment loading model was developed to better represent current, typical experiment loadings, in comparison to the experiment loading included in the model for Cycle 400 (operated in 2004). The new experiment loading model for the flux trap target region includes full length 252 Cf production targets, 75 Se production capsules, 63 Ni production capsules, a 188 W production capsule, and various materials irradiation targets. Fully loaded 238 Pu production targets are modeled in eleven vertical experiment facilities located in the beryllium reflector. Other changes compared to the Cycle 400 model are the high-fidelity modeling of the fuel element side plates and the material composition of the control elements. Results obtained from the depletion simulations with the new model are presented, with a focus on time-dependent isotopic composition of irradiated fuel and single cycle isotope production metrics.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2015

Simulation of multi-photon emission isotopes using time-resolved SimSET multiple photon history generator

Abstract-Multiple-photon emitters, such as In-111 or Se-75, have enormous potential in the field of nuclear medicine imaging. For example, Se-75 can be used to investigate the bile acid malabsorption and measure the bile acid pool loss. The simulation system for emission tomography (SimSET) is a well-known Monte Carlo simulation (MCS) code in nuclear medicine for its high computational efficiency. However, current SimSET cannot simulate these isotopes due to the lack of modeling of complex decay scheme and the time-dependent decay process. To extend the versatility of SimSET for simulation of those multi-photon emission isotopes, a time-resolved multiple photon history generator based on SimSET codes is developed in present study. For developing the time-resolved SimSET (trSimSET) with radionuclide decay process, the new MCS model introduce new features, including decay time information and photon time-of-flight information, into this new code. The half-life of energy states were tabulated from the Evaluated Nuclear Structure Data File (ENSDF) database. The MCS results indicate that the overall percent difference is less than 8.5% for all simulation trials as compared to GATE. To sum up, we demonstrated that time-resolved SimSET multiple photon history generator can have comparable accuracy with GATE and keeping better computational efficiency. The new MCS code is very useful to study the multi-photon imaging of novel isotopes that needs the simulation of lifetime and the time-of-fight measurements. (authors)

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2014

Optical analysis of TlInS{sub 2x}Se{sub 2(1−x)} mixed crystals

The ellipsometry measurements were carried out on TlInS{sub 2x}Se{sub 2(1−x)} mixed crystals in the spectral range of 1.5–6.0 eV at room temperature. The refractive index, extinction coefficient, real and imaginary parts of dielectric function were found as a result of ellipsometric measurements. The energies of interband transitions (critical point energies) of the TlInS{sub 2x}Se{sub 2(1−x)} mixed crystals were obtained by means of the second derivative of the real and imaginary parts of dielectric function. The variation of the critical point energies with the isomorphic anion substitution that is sulfur for selenium atoms was established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Studies of selenium and arsenic mutual protection in human HepG2 cells

Hundreds of millions of people worldwide are exposed to unacceptable levels of carcinogenic inorganic arsenic. Animal models have shown that selenium and arsenic are mutually protective through the formation and elimination of the seleno-bis(S-glutathionyl) arsinium ion [(GS) 2 AsSe] - . Consistent with this, human selenium deficiency in arsenic-endemic regions is associated with arsenic-induced disease, leading to the initiation of human selenium supplementation trials. In contrast to the protective effect observed in vivo, in vitro studies have suggested that selenite increases arsenite cellular retention and toxicity. This difference might be explained by the rapid conversion of selenite to selenide in vivo. In the current study, selenite did not protect the human hepatoma (HepG2) cell line against the toxicity of arsenite at equimolar concentrations, however selenide increased the IC 50 by 2.3-fold. Cytotoxicity assays of arsenite + selenite and arsenite + selenide at different molar ratios revealed higher overall mutual antagonism of arsenite + selenide toxicity than arsenite + selenite. Despite this protective effect, in comparison to 75 Se-selenite, HepG2 cells in suspension were at least 3-fold more efficient at accumulating selenium from reduced 75 Se-selenide, and its accumulation was further increased by arsenite. X-ray fluorescence imaging of HepG2 cells also showed that arsenic accumulation, in the presence of selenide, was higher than in the presence of selenite. These results are consistent with a greater intracellular availability of selenide relative to selenite for protection against arsenite, and the formation and retention of a less toxic product, possibly [(GS) 2 AsSe] - .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Extraction of selenium and arsenic with TOA-impregnated XAD-2 resin from HCl

Here the uptake of 75 Se and 73 As on trioctylamine-impregnated resin from HCl solutions was studied with batch uptake, kinetics, and column studies. Selenium-75 extracts well (D w ~ 900) at high HCl concentrations (≥ 10 M) with and no extraction of 73 As at any HCl concentration. The uptake kinetics were slow with low extraction (D w < 100) for time periods ≤ 15 min and no clear equilibrium achieved even after 24 h. Column studies were performed to characterize the separation of 75 Se and 73 As; 75Se is retained from conc. HCl while arsenic is eluted with high yields and high radiopurity.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Uptake of arsenic and selenium on iron-doped Pb resin

We report the uptake of the radioisotopes 73 As and 75 Se was characterized on Fe 3+ -doped Pb resin (Eichrom Technologies) from pH 1 to 12. There is good uptake of arsenic and selenium over a wide pH range (~ 1 to 10) with a decrease only at high pH (~ 12). Column experiments were performed to demonstrate the separations of these elements from solutions with near neutral pH values (~ 6 to 8) with high yields and high radiopurity. These separations may be relevant for a wide variety of applications especially isotope harvesting research.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Uptake behavior of arsenic and selenium with sulfur-based extraction chromatography resins in HCl and HNO 3 media

Here, the uptake behavior of 73 As and 75 Se was studied in HCl and HNO3 media with CL resin, ethanethiol resin and dimethyl sulfide resin. In HCl solutions, there was high extraction of selenium on CL resin and ethanethiol resin but lower uptake on dimethyl sulfide resin; arsenic was only extracted by CL resin. From HNO 3 , selenium was extracted only by ethanethiol resin and CL resin and there was no uptake of arsenic on any resin. While the sulfur-based resins have high selenium uptake and selectivity, column separations are challenging due to the chemical instability of these resins.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2018

Characterization of Selenium Accumulation, Localization and Speciation in Buckwheat–Implications for Biofortification

Buckwheat is an important crop species in areas of selenium (Se) deficiency. To obtain better insight into their Se metabolic properties, common buckwheat ( Fagopyrum esculentum<\em>), and tartary buckwheat ( F. tataricum<\em>) were supplied with different concentrations of Se, supplied as selenate, selenite, or Astragalus bisulcatus<\em> plant extract (methyl-selenocysteine). Se was supplied at different developmental stages, with different durations, and in the presence or absence of potentially competing ions, sulfate, and phosphate. The plants were analyzed for growth, Se uptake, translocation, accumulation, as well as for Se localization and chemical speciation in the seed. Plants of both buckwheat species were supplied with 20 μM of either of the three forms of Se twice over their growth period. Both species accumulated 15–40 mg Se kg -1 DW in seeds, leaves and stems, from all three selenocompounds. X-ray microprobe analysis showed that the Se in seeds was localized in the embryo, in organic C-Se-C form(s) resembling selenomethionine, methyl-selenocysteine, and γ-glutamyl-methylselenocysteine standards. In short-term (2 and 24 h) Se uptake studies, both buckwheat species showed higher Se uptake rate and shoot Se accumulation when supplied with plant extract (methyl-selenocysteine), compared to selenite or selenate. In long-term (7 days) uptake studies, both species were resistant to selenite up to 50 μM. Tartary buckwheat was also resistant to selenate up to 75 μM Se, but >30 μM selenate inhibited common buckwheat growth. Selenium accumulation was similar in both species. When selenite was supplied, Se levels were 10–20-fold higher in root (up to 900 mg Se kg -1 DW) than shoot, but 4-fold higher in shoot (up to 1,200 mg Se kg -1 DW) than root for selenate-supplied plants. Additionally, sulfate and phosphate supply affected Se uptake, and conversely selenate enhanced S and P accumulation in both species. These findings have relevance for crop Se biofortification applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Uptake behavior of 73 As, 75 Se, 197m Hg, 212 Pb and 210 Po on Eichrom pre-filter resin from HCl and HNO 3

We report the extraction of 73 As, 75 Se, 197 mHg, 212 Pb and 210 Po on Eichrom pre-filter resin was studied in HCl and HNO 3 with batch uptake, kinetic and column experiments. There was significant extraction of mercury in HNO 3 and HCl, and polonium and selenium in HCl. The kinetics are sufficient to allow for retention on pre-filter columns, and separations of 73 As from 75 Se and 197 mHg, and 212 Pb from 210 Po are demonstrated. This retention is important for the development of chemical separations as pre-filter resin is commonly used alongside extraction chromatography resins but its potential for uptake of metal ions is not well characterized.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Behavior of selenium and arsenic in $\mathrm{HCl}$ and $\mathrm{HNO}$ 3 on $\mathrm{TRU, TEVA, DGA,}$ and $\mathrm{Pb}$ extraction chromatography resins

The uptake behavior of 73 As and 75 Se was studied in HCl and HNO 3 -H 2 O 2 solutions on commercial extraction chromatography resins (TEVA, TRU, DGA, and Pb resin). There was no uptake of 73 As or 75 Se from HNO 3 media. From HCl, there was 75 Se uptake at high concentrations on all the resins and no uptake of 73 As. Separations of 75 Se and 73 As on these resins have high yields and high radiopurity for 73 As, but limited recovery of 75 Se. TRU and TEVA resin may have potential for use in isotope generators as 75 Se can be retained for at least 26 days with repeated elutions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2014

High-pressure behavior of amorphous selenium from ultrasonic measurements and Raman spectroscopy

The high-pressure behavior of melt-quenched amorphous selenium (a-Se) has been investigated via ultrasonic measurements and Raman scattering at room temperature. The ultrasonic measurements were conducted on a-Se in a multi-anvil apparatus with two different sample assemblies at pressures of up to 4.5 and 4.8 GPa. We discovered that similar kinks occur in the slopes of the pressure dependence characteristics of the travel time and the sound velocity in both shear and longitudinal waves in the 2.0–2.5 GPa range. These kinks are independent of the sample assemblies, indicating an intrinsic transformation of the a-Se. Additionally, we deduced the pressure-volume relationship of a-Se from the sound velocity characteristics using the Birch–Murnaghan equation of state, and the results agreed well with those of previous reports. In situ high-pressure Raman scattering measurements of a-Se were conducted in a diamond anvil cell with an 830 nm excitation line up to a pressure of 4.3 GPa. We found that the characteristic band of a-Se at ∼250 cm{sup −1} experienced a smooth shift to a lower frequency with pressure, but a sharp slope change in the band intensity versus pressure occurred near 2.5 GPa. The results of X-ray diffraction and differential scanning calorimetry measurements indicate that the samples remain in their amorphous states after decompression. Thus, we proposed that the abnormal compression behavior of a-Se in the 2.0–2.5 GPa range can be attributed to pressure-induced local atomic reconfiguration, implying an amorphous-amorphous transition of the elementary selenium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Enhancing the Circular Polarization of Spin Light-Emitting Diodes by Processing in Selenium Vapor

Spin light-emitting diodes based on InGaAs/GaAs heterostructures with a CoPt ferromagnetic injector were fabricated. It was demonstrated that the processing of these structures in selenium vapor prior to the deposition of a CoPt contact provides an opportunity to enhance the circular polarization degree of diode emission. The observed increase in the polarization degree is attributed to the suppression of spin relaxation at the metal/semiconductor interface due to surface passivation and a reduction in the density of surface electron states as a result of processing in selenium vapor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Selenium utilization in thioredoxin and catalytic advantage provided by selenocysteine

Thioredoxin (Trx) is a major thiol-disulfide reductase that plays a role in many biological processes, including DNA replication and redox signaling. Although selenocysteine (Sec)-containing Trxs have been identified in certain bacteria, their enzymatic properties have not been characterized. In this study, we expressed a selenoprotein Trx from Treponema denticola, an oral spirochete, in Escherichia coli and characterized this selenoenzyme and its natural cysteine (Cys) homologue using E. coli Trx1 as a positive control. {sup 75}Se metabolic labeling and mutation analyses showed that the SECIS (Sec insertion sequence) of T. denticola selenoprotein Trx is functional in the E. coli Sec insertion system with specific selenium incorporation into the Sec residue. The selenoprotein Trx exhibited approximately 10-fold higher catalytic activity than the Sec-to-Cys version and natural Cys homologue and E. coli Trx1, suggesting that Sec confers higher catalytic activity on this thiol-disulfide reductase. Kinetic analysis also showed that the selenoprotein Trx had a 30-fold higher K{sub m} than Cys-containing homologues, suggesting that this selenoenzyme is adapted to work efficiently with high concentrations of substrate. Collectively, the results of this study support the hypothesis that selenium utilization in oxidoreductase systems is primarily due to the catalytic advantage provided by the rare amino acid, Sec. - Highlights: • The first characterization of a selenoprotein Trx is presented. • The selenoenzyme Trx exhibits 10-fold higher catalytic activity than Cys homologues. • Se utilization in Trx is primarily due to the catalytic advantage provided by Sec residue.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

The Electron Structure of Metallic Layers in the Quasi-Two-Dimensional Dual-Layered Organic Metal (BETS){sub 4}HgBr{sub 4}(C{sub 6}H{sub 4}Cl{sub 2})

We have studied the behavior of the Shubnikov–de Haas (SdH) oscillations in the quasi-two-dimensional dual-layered organic metal (BETS){sub 4}HgBr{sub 4}(C{sub 6}H{sub 4}Cl{sub 2}). It is established that the spectrum of SdH oscillations in this compound agrees well with theoretical calculations and qualitatively coincides with the analogous spectrum of (ET){sub 4}HgBr{sub 4}(C{sub 6}H{sub 4}Cl{sub 2}) isostructural organic metal. The fractional substitution of sulfur by selenium in the cationic layer strongly decreases the values of cyclotron masses. This decrease is most probably caused by weakening of the electron–phonon interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Heterostructures Based on Magnetic and Topological Insulators

Using ab initio calculations, an investigation of the electronic structure of the magnetic insulator/topological insulator heterostructures is performed. Bismuth selenide is used as a topological insulator and monolayers of vanadium-based van der Waals materials VSe{sub 2} and VBi{sub 2}Se{sub 4} – as magnetic materials. The formation of the latter one is possible via diffusion of the deposited vanadium and selenium atoms into the surface block of the layered Bi{sub 2}Se{sub 3}. A comparison of the electronic structure of the two heterostructures is performed and peculiar features of interaction of the Dirac state of the topological insulator with the magnetic states of vanadium are revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗