Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEMICONDUCTOR LASER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Method and system for powering and cooling semiconductor lasers

A semiconductor laser system includes a diode laser tile. The diode laser tile includes a mounting fixture having a first side and a second side opposing the first side and an array of semiconductor laser pumps coupled to the first side of the mounting fixture. The semiconductor laser system also includes an electrical pulse generator thermally coupled to the diode bar and a cooling member thermally coupled to the diode bar and the electrical pulse generator.

42 ENGINEERING↗

Apertureless scanning microscope probe as a detector of semiconductor laser emission

An operating semiconductor laser has been studied using a scanning probe microscope. A shift of the resonance frequency of probe that is due to its heating by laser radiation has been analyzed. The observed shift is proportional to the absorbed radiation and can be used to measure the laser near field or its output power. A periodical dependence of the measured signal has been observed as a function of distance between the probe and the surface of the laser due to the interference of the outgoing and cantilever-reflected waves. Due to the multiple reflections resulting in the interference, the light absorption by the probe cantilever is greatly enhanced compared with a single pass case. Interaction of infrared emission of a diode laser with different probes has been studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transversely diode-pumped Q-switched Nd : YAG laser with injection of radiation from a single-frequency semiconductor laser

A Q-switched Nd : YAG laser with a high-power transverse diode pumping and injection of seed radiation generated by a single-frequency semiconductor laser is described. The threshold seed radiation power at which the Q-switched Nd : YAG switches to the single-frequency mode is 0.44 mW (radiation intensity 5.6×10{sup −2} W cm{sup −2}). With increasing injection power, the spectral and power characteristics of the Q-switched laser almost do not change at a constant excitation of its active medium. The spectral linewidth of the Q-switched Nd : YAG laser with injection from a TLD-1060-14BF single-frequency semiconductor laser module does not exceed 90 MHz (wavelength 1064 nm). (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polymer dye laser pumped with green semiconductor lasers

We report the results of experiments on quasi-longitudinal pumping of a polymer dye laser by two green ( λ = 513 nm) pulsed laser diodes. The lasing thresholds, efficiency, and photostability of pyrromethenes in various polymers are studied. The efficiency of dye lasers based on pyrromethene 567 and pyrromethene 580 with a three-mirror cavity with partial astigmatism compensation exceeds 20 %. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fibre ring cavity semiconductor laser

This paper presents a study of semiconductor lasers having a polarisation maintaining fibre ring cavity. We examine the operating principle and report main characteristics of a semiconductor ring laser, in particular in single- and multiple-frequency regimes, and discuss its application areas. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental studies of 1.5 – 1.6 μm high-power single-frequency semiconductor lasers

High-power semiconductor laser systems based on 1.5 – 1.6 μm single-frequency distributed feedback (DFB) lasers with a sidewall Bragg diffraction grating are developed and their current – voltage, light – current, and spectral characteristics are experimentally studied. The characteristics of conventional lasers with a Fabry – Perot cavity and DFB lasers fabricated from one and the same heterostructure are compared. At a pump current not exceeding 700 mA, a conventional laser with a cavity length of 1.6 mm and a mesa-stripe width of 3 μm emits a power no lower than 200 mW versus 150 mW of the DFB laser; both lasers are mounted in a housing 11 mm in diameter. The DFB laser mounted in a butterfly housing emits a power no lower than 100 mW at the exit of the single-mode cable at a pump current not exceeding 500 mA, which, at a 60 % coupling efficiency, corresponds to a power no lower than 165 mW; the side-mode suppression ratio in this case is no lower than 53 dB. It is shown that the wavelength deviation with changing pump current and temperature is almost an order of magnitude lower for the DFB laser than for the conventional laser. (paper)

36 MATERIALS SCIENCE↗

Pulsed laser module based on a high-power semiconductor laser for the spectral range 1500 – 1600 nm

A laser source for bleaching passive Q-switches of erbium-ytterbium lasers is developed and studied. The developed and studied compact pulsed module (peak power exceeding 10 W in a pulse with a duration of 1 μs at a wavelength around 1550 nm) is made on the basis of a semiconductor lasers with an ultra-narrow waveguide integrated with a pulsed pump card. To optimise the output laser characteristics, a series resistance was used in the laser pump circuit. The powers of the free-space and fibre-coupled modules at a temperature of 25 °C are 15 and 12 W, respectively, at a pulse shape close to rectangular. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Instability of stationary lasing and self-starting mode locking in external-cavity semiconductor lasers

Parameters of external-cavity semiconductor lasers, when the stationary lasing becomes unstable, were analysed within the framework of a theoretical model of self-starting mode locking. In this case, a train of ultrashort pulses can be generated due to intrinsic nonlinearities of the laser medium. A decisive role of the transverse optical field nonuniformity, pump rate, and gain spectral bandwidth in the development of the instability of stationary lasing was demonstrated. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semiconductor laser with the subhertz linewidth

A semiconductor laser emitting at 972 nm is stabilised with respect to a vibrationally and thermally compensated reference Fabry-Perot resonator with the vertical axis. The supporting points lie in the horizontal symmetry plane of the resonator, the influence of vibrations in the vertical direction being substantially suppressed in this case. This configuration provides a low sensitivity of the laser emission frequency to vertical accelerations of the reference resonator. To reduce the influence of temperature fluctuations, the resonator is made of an ULE (ultra-low-expansion) glass and is kept at temperature at which the expansion coefficient of this glass is close to zero. The laser linewidth is smaller than 0.5 Hz and the frequency drift is {approx}0.1 Hz s{sup -1}. The minimum of the Allan deviation achieved for 3 s is 2x10{sup -15}. The laser was used to record the spectra of the 1S-2S transition in atomic hydrogen. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Substrate-emitting semiconductor laser with a trapezoidal active region

Semiconductor lasers with a narrow (∼2°) directional pattern in the planes both parallel and perpendicular to the p–n junction are fabricated. To achieve a low radiation divergence in the p–n junction plane, the active region in this plane was designed in the form of a trapezium. The narrow directional pattern in the plane perpendicular to the p–n junction was ensured by the use of a leaky mode, through which more than 90% of laser power was coupled out. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Guiding effect of quantum wells in semiconductor lasers

The guiding effect of InGaAs quantum wells in GaAs- and InP-based semiconductor lasers has been studied theoretically and experimentally. The results demonstrate that such waveguides can be effectively used in laser structures with a large refractive index difference between the quantum well material and semiconductor matrix and a large number of quantum wells (e.g. in InP-based structures). (semiconductor lasers. physics and technology)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the pulse characteristics of semiconductor lasers with a broadened waveguide at low temperatures (110–120 K)

Pulse-pumped MOVPE-fabricated (metal-organic vapor-phase epitaxy) semiconductor lasers emitting in the spectral ranges 1000–1100 and 1400–1600 nm at temperatures of 110–120 K are studied. It is found that cooling the lasers for both spectral ranges to low temperature results in their light–current curves approaching linearity, and an optical power of, respectively, 110 and 20 W can be attained. The low-temperature effect is reduced for lasers emitting in the spectral range 1400–1600 nm. The processes affecting a rise in the internal optical loss in semiconductor lasers are considered. It is shown that an increase in the carrier concentration in the waveguide of a laser structure greatly depends on temperature and is determined by the noninstantaneous capture (capture rate) of carriers from the waveguide into the active region. It is demonstrated that, upon lowering the temperature to 115K, the concentration of electrons and holes in the waveguide becomes lower, which leads to a significant decrease in the internal optical loss and to an increase in the output optical power of the semiconductor laser.

36 MATERIALS SCIENCE↗

Theoretical modeling of the dynamics of a semiconductor laser subject to double-reflector optical feedback

We theoretically model the dynamics of semiconductor lasers subject to the double-reflector feedback. The proposed model is a new modification of the time-delay rate equations of semiconductor lasers under the optical feedback to account for this type of the double-reflector feedback. We examine the influence of adding the second reflector to dynamical states induced by the single-reflector feedback: periodic oscillations, period doubling, and chaos. Regimes of both short and long external cavities are considered. The present analyses are done using the bifurcation diagram, temporal trajectory, phase portrait, and fast Fourier transform of the laser intensity. We show that adding the second reflector attracts the periodic and perioddoubling oscillations, and chaos induced by the first reflector to a route-to-continuous-wave operation. During this operation, the periodic-oscillation frequency increases with strengthening the optical feedback. We show that the chaos induced by the double-reflector feedback is more irregular than that induced by the single-reflector feedback. The power spectrum of this chaos state does not reflect information on the geometry of the optical system, which then has potential for use in chaotic (secure) optical data encryption.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The temperature dependence of internal optical losses in semiconductor lasers ({lambda} = 900-920 nm)

The temperature dependences of radiative characteristics of semiconductor lasers based on asymmetric heterostructures of the separate confinement with an extended waveguide fabricated by MOCVD epitaxy (the emission wavelength {lambda} = 900-920 nm) are studied. It is established that the threshold concentration in the active region and waveguide layers of the laser heterostructure of the separate confinement increases in the CW lasing mode as the pumping current and temperature of the active region are increased. It is established experimentally that, in the temperature range of 20-140 deg. C, the stimulated quantum yield remains unchanged. It is shown that the temperature delocalization of charge carriers leads to an increase in the carrier concentration in the waveguide layers of the laser heterostructure. The total increase in internal optical losses due to scattering by free charge carriers in the layers of the active region and waveguide layers of the laser heterostructure leads to a decrease in the differential quantum efficiency and to saturation of the watt-ampere characteristic of semiconductor lasers in the continuous lasing mode.

36 MATERIALS SCIENCE↗

Semiconductor Laser Diode Pumps for Inertial Fusion Energy Lasers

Solid-state lasers have been demonstrated as attractive drivers for inertial confinement fusion on the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) and at the Omega Facility at the Laboratory for Laser Energetics (LLE) in Rochester, NY. For power plant applications, these lasers must be pumped by semiconductor diode lasers to achieve the required laser system efficiency, repetition rate, and lifetime. Inertial fusion energy (IFE) power plants will require approximately 40-to-80 GW of peak pump power, and must operate efficiently and with high system availability for decades. These considerations lead to requirements on the efficiency, price, and production capacity of the semiconductor pump sources. This document provides a brief summary of these requirements, and how they can be met by a natural evolution of the current semiconductor laser industry. The detailed technical requirements described in this document flow down from a laser ampl9ifier design described elsewhere. In brief, laser amplifiers comprising multiple Nd:glass gain slabs are face-pumped by two planar diode arrays, each delivering 30 to 40 MW of peak power at 872 nm during a {approx} 200 {micro}s quasi-CW (QCW) pulse with a repetition rate in the range of 10 to 20 Hz. The baseline design of the diode array employs a 2D mosaic of submodules to facilitate manufacturing. As a baseline, they envision that each submodule is an array of vertically stacked, 1 cm wide, edge-emitting diode bars, an industry standard form factor. These stacks are mounted on a common backplane providing cooling and current drive. Stacks are conductively cooled to the backplane, to minimize both diode package cost and the number of fluid interconnects for improved reliability. While the baseline assessment in this document is based on edge-emitting devices, the amplifier design does not preclude future use of surface emitting diodes, which may offer appreciable future cost reductions and increased reliability. The high-level requirements on the semiconductor lasers involve reliability, price points on a price-per-Watt basis, and a set of technical requirements. The technical requirements for the amplifier design in reference 1 are discussed in detail and are summarized in Table 1. These values are still subject to changes as the overall laser system continues to be optimized. Since pump costs can be a significant fraction of the overall laser system cost, it is important to achieve sufficiently low price points for these components. At this time, the price target for tenth-of-akind IFE plant is $0.007/Watt for packaged devices. At this target level, the pumps account for approximately one third of the laser cost. The pump lasers should last for the life of the power plant, leading to a target component lifetime requirement of roughly 14 Ghosts, corresponding to a 30 year plant life and 15 Hz repetition rate. An attractive path forward involes pump operation at high output power levels, on a Watts-per-bar (Watts/chip) basis. This reduces the cost of pump power (price-per-Watt), since to first order the unit price does not increase with power/bar. The industry has seen a continual improvement in power output, with current 1 cm-wide bars emitting up to 500 W QCW (quasi-continuous wave). Increased power/bar also facilitates achieving high irradiance in the array plane. On the other hand, increased power implies greater heat loads and (possibly) higher current drive, which will require increased attention to thermal management and parasitic series resistance. Diode chips containing multiple p-n junctions and quantum wells (also called nanostack structures) may provide an additional approach to reduce the peak current.

42 ENGINEERING↗

Semiconductor laser gyro with optical frequency dithering

The semiconductor laser gyro is described, in which the optical frequency dithering implemented by intracavity phase modulation suppresses the frequency lock-in and provides the interference of multimode radiation. The sensitivity of the device amounted to 10–20 deg h{sup -1}. (laser gyroscopes)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of the axicon characteristics and beam propagation parameter M{sup 2} on the formation of Bessel beams from semiconductor lasers

We study the peculiarities of the formation of Bessel beams in semiconductor lasers with a high propagation parameter M{sup 2}. It is shown that the propagation distance of the Bessel beam is determined by the divergence of the quasi-Gaussian beam with high M{sup 2} rather than the geometric parameters of the optical scheme. It is demonstrated that technologically inevitable rounding of the axicon tip leads to a significant increase in the transverse dimension of the central part of the Bessel beam near the axicon. (semiconductor lasers. physics and technology)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗