Sintering shape distortions controlled by interface roughness in powder composites
Not provided.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
Was conducted to analyze the effect of temperature variation on the bonding interface sintered composite Al-Mg and analyze the effect of variations of the density and hardness sinter. Research carried out by the base material powders of Al, Mg powder and solvent n-butanol. The method used in this study is a powder metallurgy, with a composition of 60% volume fraction of Al - 40% Mg. Al-Mg mixing with n-butanol for 1 hour at 500 rpm. Then the emphasis (cold comression) with a size of 1.4 cm in diameter dies and height of 2.8 cm, is pressed with a force of 20 MPa and held for 15 minutes. After the sample into pellets, then sintered at various temperatures 300 °C, 350 °C, 400 °C and 450 °C. Characterization is done by using the testing green density, sintered density, X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), vickers microhardness, and press test. XRD data analysis done by using X’Pert High Score Plus (HSP) to determine whether there is a new phase is formed. Test results show that the sintered density increasing sintering temperature, the resulting density is also increasing (shrinkage). However, at a temperature of 450 °C decreased (swelling). With the increased sinter density, interfacial bonding getting Kuta and more compact so that its hardness is also increased. From the test results of SEM / EDX, there Mg into Al in the border area. At temperatures of 300 °C, 350 °C, 400 °C, the phase formed is Al, Mg and MgO. While phase is formed at a temperature of 450 °C is aluminum magnesium (Al{sub 3}Mg{sub 2}), Aluminum Magnesium Zinc (AlMg{sub 2}Zn).
Abstract not provided.
Abstract not provided.
This presentation describes our progress in the area of thermal interface materials for power electronics applications.
Solid-state batteries offer higher energy density and enhanced safety compared to the present lithium-ion batteries using liquid electrolytes. A challenge to implement them is the high resistances, especially at the solid electrolyte interface with the cathode. Sintering at elevated temperature is needed in order to get good contact between the ceramic solid electrolyte and oxide cathodes and thus to reduce contact resistances. Many solid electrolyte and cathode materials react to form secondary phases. It is necessary to find out which phases arise as a result of interface sintering and evaluate their effect on electrochemical properties. Herein, we assessed the interfacial reactions between LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and Li 7 La 3 Zr 2 O 12 (LLZO) as a function of temperature in air. We prepared model systems by depositing thin-film NMC622 cathode layers on LLZO pellets. The thin-film cathode approach enabled us to use interface-sensitive techniques such as X-ray absorption spectroscopy in the near-edge as well as the extended regimes and identify the onset of detrimental reactions. We found that the Ni and Co chemical environments change already at moderate temperatures, on-setting from 500 °C and becoming especially prominent at 700 °C. By analyzing spectroscopy results along with X-ray diffraction, we identified Li 2 CO 3 , La 2 Zr 2 O 7 , and La(Ni,Co)O 3 as the secondary phases that formed at 700 °C. The interfacial resistance for Li transfer, measured by electrochemical impedance spectroscopy, increases significantly upon the onset and evolution of the detected interface chemistry. Our findings suggest that limiting the bonding temperature and avoiding CO 2 in the sintering environment can help to remedy the interfacial degradation.
The integration of fiber optic sensors into high-temperature materials is critical for real-time monitoring and autonomous operation of engineering systems. This study demonstrated a spark plasma sintering (SPS)-assisted embedding process for integrating sapphire fiber optic sensors into stainless steel components during part fabrication. Optical fibers were encapsulated in stainless steel 316L powders which were sintered at different fabrication conditions using SPS to investigate the effects of sintering parameters on the embedment. Measurements of optical transmittance, combined with microstructural analysis (X-ray computed tomography and scanning electron microscopy) and mechanical testing (tensile and microhardness), were conducted to examine the fiber functionality, fiber–matrix bonding quality, and properties of the sintered materials. Here, the results show that under suitable fabrication conditions, intact optical fibers can be encapsulated in highly-densified (>98 % relative density) stainless steel components. These conditions also led to a good bond at the fiber–matrix interface with micron-sized material interdiffusion across the interface. The sintering parameters were observed to affect fiber optical attenuation, where high temperature, pressure, and hold time during SPS enhanced fiber–matrix bonding and adversely affected optical transmission. Tensile testing confirmed the superior tensile strength and ductility of the matrix fabricated by SPS. Furthermore, the materials exhibited limited strength reduction (~70 MPa) upon the integration of fibers. This study demonstrates the effectiveness of SPS for fiber-material integration for high-temperature applications.
Abstract Nanoparticle (NP) sintering is a major cause of the deactivation of supported catalysts. Raspberry‐colloid‐templated (RCT) catalysts are an emerging class of materials that show an unprecedented level of sinter‐resistance and exhibit high catalytic activity. Here a comprehensive study of the origin of NP stability and accessibility in RCT catalysts using theoretical modeling, 3D electron microscopy, and epitaxial overgrowth is reported. The approach is showcased for silica‐based RCT catalysts containing dilute Pd‐in‐Au NPs previously used in hydrogenation and oxidation catalysis. Modeling of the contact line of the silica precursor infiltrating into the assembled raspberry colloids suggests that a large part of the particles must be embedded into silica, which is confirmed by quantitative visualization of >200 individual NPs by dual‐axis electron tomography. The RCT catalysts have a unique structure in which all NPs reside at the pore wall but have >50% of their surface embedded in the matrix, giving rise to the strongly enhanced thermal and mechanical stability. Importantly, epitaxial overgrowth of Ag on the supported NPs reveals that not only the NP surface exposed to the pore but the embedded interface as well remained chemically accessible. This mechanistic understanding provides valuable guidance in the design of stable catalytic materials.
Explore the source record for details and available documents.
The Grand Challenge for the next generation of energy storage technologies is no longer the identification of electroactive cathode or anode materials thanks to extensive worldwide synthesis efforts along with theory and modeling like the Materials Project.1 Instead, the critical challenges revolve around assembling materials in the right architecture to achieve maximum performance and cell life at reasonable temperatures and pressures. Nowhere is this more critical than on the next generation of energy storage technologies revolving around all solid-state batteries. These batteries are the ultimate challenge for materials science requiring new ways to assemble multiple dissimilar materials such that: (1) interfaces are optimized to facilitate ion motion across the different compounds while (2) maintaining chemical stability and (3) simultaneously preserving the crystal structures of each phase during (4) large volume changes due to shuttling of lithium, at (5) room temperature and under (6) atmospheric pressure. To address these requirements will require insights and expertise from research fields outside the traditional lithium-ion battery community such as solid oxide fuel cells, synthesis science, barrier layers, interface formers, sintering, and mechanical properties.
The presentation focuses on mechanical characterization, reliability evaluation and thermomechanical modeling of sintered silver bonded interface material. Two types of sintered silver material are being investigated in this study - first one based on nanosilver particles and the other one comprising of a mixture of nanosilver particles and micron-sized silver flakes. Shear stress results obtained as a function of displacement rates and ambient temperature are reported. Also, scanning acoustic microscopy images of samples for accelerated testing and thermomechanical modeling results are presented.
Sintering and sublimation process of nanoparticles made of Ag, Au, and interfaced Ag/Au heterodimers has been investigated by in-situ transmission electron microscopy at room temperature. Such process is driven by the illumination of high-energy electron beam accelerated at 200kV that promotes atom diffusion in the physically contacted nanoparticles. Upon electron illumination, adjacent Au nanoparticles gradually merge together to form a larger particle along with the reduction of surface area despite that orientated attachment is not observed. The nanoparticle fusion process is significantly different from the well-established thermal diffusion mechanism. In addition to the similar fusion process, Ag nanoparticles undergo apparent sublimation because the transferred energy from electron beam to nanoparticles is higher than the surface binding energy of Ag atoms when the electron scattering angle is larger than 112°. The electron beam illumination can transform the interfaced Au/Ag dimers to Au@Ag core-shell particles followed by a slow sublimation of the Ag shells. Both diffusion and sublimation of Ag atoms are dependent on the intensity of electron beam, i.e., higher beam intensity is favorable to accelerate both process.
Sintered silver-based bonded interfaces are a critical enabling technology for high-temperature, compact, high-performance, and reliable wide-bandgap packages and components. High-pressure (~40 MPa) sintered silver interfaces have been implemented commercially, most notably the commercial products offered by Semikron. To reduce manufacturing complexity, there is significant industry interest in pressure-less sintered silver interfaces. To this end, current formulations of sintered silver paste are comprised of purely nano-sized silver particles or a combination of nano- and micro-sized silver particles/flakes. It is essential to quantify the mechanical properties and determine the reliability of these interfaces prior to use in automotive power electronics applications. In this paper, research efforts at the National Renewable Energy Laboratory, in collaboration with Virginia Polytechnic Institute and State University and an industry partner, in optimizing the synthesis procedure and mechanical characterization of sintered silver double-lap samples are described. These double-lap samples were synthesized using pressure-less sintering techniques. Shear testing was conducted at multiple temperatures and displacement rates on these samples sintered using two types of sintered sintered silver pastes, one of them consisting of nano-silver particles and the other a hybrid paste or a combination of nano- and micron-sized silver flakes, employed in a double-lap configuration. Maximum values of shear stress obtained from the characterization study are reported.
Sintered silver-based bonded interfaces are a critical enabling technology for high-temperature, compact, high-performance, and reliable wide-bandgap packages and components. High-pressure (about 40 MPa) sintered silver interfaces have been implemented commercially, most notably the commercial products offered by Semikron. To reduce manufacturing complexity, there is significant industry interest in pressure-less sintered silver interfaces. To this end, current formulations of sintered silver paste are comprised of purely nano-sized silver particles or a combination of nano- and micro-sized silver particles/flakes. It is essential to quantify the mechanical properties and determine the reliability of these interfaces prior to use in automotive power electronics applications. In this paper, research efforts at the National Renewable Energy Laboratory, in collaboration with Virginia Polytechnic Institute and State University and an industry partner, in optimizing the synthesis procedure and mechanical characterization of sintered silver double-lap samples are described. These double-lap samples were synthesized using pressure-less sintering techniques. Shear testing was conducted at multiple temperatures and displacement rates on these samples sintered using two types of sintered silver pastes, one of them consisting of nano-silver particles and the other a hybrid paste or a combination of nano- and micron-sized silver flakes, employed in a double-lap configuration. Maximum values of shear stress obtained from the characterization study are reported.
Here, the evolution of the nanoporous structure of cylindrical sintered silver samples during high temperature aging, ranging from 200 to 350 °C for 350 min, is studied through in situ computed X-ray tomography. Investigations are carried out for two types of specimens: pure sintered silver and specimens containing a silver-copper interface. It is shown that the overall pore evolution is driven by the evolution of very few large ones. The smaller pores, although being more numerous, do not really evolve before being absorbed by the few bigger ones. In pure silver, pore evolution is driven by diffusion (Ostwald ripening) but the presence of an interface promotes faster growth kinetics until the aging time reaches a threshold value, after which a deviation from Ostwald ripening occurs. The transition is a function of the aging temperature. This behavior is associated with the competition between elastic relaxation and surface energy minimization.
An advanced monolithic cup comprising a thin liner and a trabecular coating is a promising alternative to the current modular ceramic cups for hip replacements because it can be anchored directly to the human bone and features larger femoral heads allowing a greater range of motion. In this study, the authors propose a fabrication route for an advanced monolithic cup of only one high-strength ceramic material by joining a partially sintered liner and a coating with a ceramic paste as an intermediate layer and subsequent sintering. Therefore, the challenge here is to avoid the formation of defects at the coating/intermediate layer interfaces during classical sintering which is due to compressive tension constrained coating sintering in the initial sintering stages. In this study, the defect formation is minimized by sintering at constant low shrinkage rates, as this results in favorable compressive stresses in the coating in the initial sintering stages and a decrease in the differences in the densification rates. For the first time, by using the proposed route, the authors prepare an advanced monolithic cup of only alumina-toughened zirconia (ATZ) that contains a coating with a porosity of 50 vol% and interconnected pores between 150 and 450 μm, as required for bone-ingrowth.
Vanadium alloys and FeCrAl were investigated as interlayers between tungsten and reduced activation ferritic martensitic steel for fusion system components to avoid formation of intermetallic phase at operating temperatures between 550 and 1100 °C, while maintaining a body centered cubic phase throughout the interface. Physical and mechanical properties need to be graded between tungsten and steel, but recent results showed a significant hardness increase at the FeCrAl to vanadium alloy interface. Here, a sintered sample of these alloys was annealed for extended time, and the microstructure was investigated to provide a better understanding of the phenomena. A comparison with an additively manufactured interface of the same material is provided. An unexpected L2 1 intermetallic phase formation has been revealed using microscopy and synchrotron techniques and will inform future additive manufacturing approaches of the interface. A Cr layer interface as a preliminary solution was proposed between the Vanadium alloy and FeCrAl alloy interface.