Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOUND TRANSMISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

On sound transmission into a heavily-damped cylinder

A mathematical model for the transmission of sound into a thin monocoque cylindrical shell is discussed. The model is used to evaluate an oblique plane wave incident upon a flexible thin cylindrical shell. The solution is applicable to the transmission of sound under actual flight conditions. The model is then used to determine curves of cylinder-transmission loss for heavily damped cylinders. Numerical results are found for several plane-wave incidence angles for a narrow-bodied jet fuselage made of aluminum. It is noted that damping (i.e., the loss factor) increases, dips because of reduced cylinder resonances, and eventually disappears when the loss factor of the shell is large enough.

Koval, L. R.↗
NASA NTRS1975

On sound transmission into a thin cylindrical shell under 'flight conditions'

A mathematical model for sound transmission into a thin cylindrical shell is used to study sound transmission under flight conditions, i.e., under conditions of external air flow past a pressurized cylinder at flight altitude. Numerical results for different incidence angles are presented for a typical narrow-bodied jet in cruising flight at 10,660 m with interior pressure at 2440 m. A comparison is made between no-flow sound transmission at standard conditions on the ground to sound transmission under flight conditions. It is shown that at M = 0, the cylinder transmission loss (TL) has dips at the cylinder ring frequency (fR) and the critical frequency (fc) for a flat panel of same material and thickness as shell. Between fR and fc, cylinder TL follows a mass-law behavior. Flow provides a modest increase in TL in the mass-law region, and strongly interacts with the cylinder resonances below fR.

Koval, L. R.↗
NASA NTRS1978

A method of weighted residuals with trigonometric basis functions for sound transmission in circular ducts

The method of weighted residuals (MWR) in the form of a modified Galerkin method with trigonometric basis functions is used to compute the transmission of sound in an axisymmetric duct. The method is used to generate the axial wave number for uniform ducts. These are compared with exact solutions generated by a formal eigenvalue routine in the hard-wall case and a Runge-Kutta integration eigenvalue scheme in the soft-wall case. The method is applicable to both flow and no-flow cases.

Vo, P. T.↗
NASA NTRS1996

Sound Transmission through a Cylindrical Sandwich Shell with Honeycomb Core

Sound transmission through an infinite cylindrical sandwich shell is studied in the context of the transmission of airborne sound into aircraft interiors. The cylindrical shell is immersed in fluid media and excited by an oblique incident plane sound wave. The internal and external fluids are different and there is uniform airflow in the external fluid medium. An explicit expression of transmission loss is derived in terms of modal impedance of the fluids and the shell. The results show the effects of (a) the incident angles of the plane wave; (b) the flight conditions of Mach number and altitude of the aircraft; (c) the ratios between the core thickness and the total thickness of the shell; and (d) the structural loss factors on the transmission loss. Comparisons of the transmission loss are made among different shell constructions and different shell theories.

Tang, Yvette Y.↗
NASA NTRS1987

Light aircraft sound transmission studies - Noise reduction model

Experimental tests conducted on the fuselage of a single-engine Piper Cherokee light aircraft suggest that the cabin interior noise can be reduced by increasing the transmission loss of the dominant sound transmission paths and/or by increasing the cabin interior sound absorption. The validity of using a simple room equation model to predict the cabin interior sound-pressure level for different fuselage and exterior sound field conditions is also presented. The room equation model is based on the sound power flow balance for the cabin space and utilizes the measured transmitted sound intensity data. The room equation model predictions were considered good enough to be used for preliminary acoustical design studies.

Atwal, Mahabir S.↗
NASA NTRS1989

Reduction of sound transmission through fuselage walls by alternate resonance tuning (A.R.T.)

The ability of alternate resonance tuning (ART) to block sound transmission through light-weight flexible paneled walls by controlling the dynamics of the wall panels is considered. Analytical results for sound transmission through an idealized panel wall illustrate the effect of varying system parameters and show that one or more harmonics of the incident sound field can be cancelled by the present method. Experimental results demonstrate that very large transmission losses with reasonable bandwidths can be achieved by a simple ART panel barrier in a duct.

Bliss, Donald B.↗
NASA NTRS1978

Recent advances concerning an understanding of sound transmission through engine nozzles and jets

Experiments on the interaction between a turbulent jet and pure tone sound coming from inside the jet nozzle are reported. This is a model representing the sound transmission from sound sources in jet engines through the nozzle and the jet flow into the far field. It is shown that pure tone sound at low frequencies is considerably attenuated by the jet flow, whereas it is conserved at higher frequencies. On the other hand, broadband jet noise can be amplified considerably by a pure tone excitation. Both effects seem not to be interdependent. Knowledge on how they are created and on relevant parameter dependences allow new considerations for the development of sound attenuators.

Bechert, D.↗
NASA NTRS1981

A study of methods of prediction and measurement of the transmission sound through the walls of light aircraft

Several aspects were studied. The SEA theory was used to develop a theoretical model to predict the transmission loss through an aircraft window. This work mainly consisted of the writing of two computer programs. One program predicts the sound transmission through a plexiglass window (the case of a single partition). The other program applies to the case of a plexiglass window window with a window shade added (the case of a double partition with an air gap). The sound transmission through a structure was measured in experimental studies using several different methods in order that the accuracy and complexity of all the methods could be compared. Also, the measurements were conducted on the simple model of a fuselage (a cylindrical shell), on a real aircraft fuselage, and on stiffened panels.

Forssen, B.↗
NASA NTRS1978

Experimental and theoretical sound transmission

The capabilities of the Kansas University- Flight Research Center for investigating panel sound transmission as a step toward the reduction of interior noise in general aviation aircraft were discussed. Data obtained on panels with holes, on honeycomb panels, and on various panel treatments at normal incidence were documented. The design of equipment for panel transmission loss tests at nonnormal (slanted) sound incidence was described. A comprehensive theory-based prediction method was developed and shows good agreement with experimental observations of the stiffness controlled, the region, the resonance controlled region, and the mass-law region of panel vibration.

Roskam, J.↗
NASA NTRS1996

Modeling of Sound Transmission through Shell Structures with Turbulent Boundary Layer Excitation

The turbulent boundary layer (TBL) pressure field is an important source of cabin noise during cruise of high subsonic and supersonic commercial aircraft. The broadband character of this excitation field results in an interior noise spectrum that dominates the overall sound pressure level (SPL) and speech interference metrics in the forward and midcabins of many aircraft. In the authors' previous study, sound transmission through an aircraft fuselage, modeled by two concentric cylindrical sandwich shells and excited by a TBL statistical model was investigated analytically. An assessment of point and global structural vibration levels and resulting interior noise levels was obtained for different TBL models, flight conditions and fuselage structural designs. However, due to the complication of the shell structure, the important noise transmission mechanisms were difficult to discern. Previous experience has demonstrated that a fundamental understanding of the range of modes (or wavenumbers) generated by the TBL source both in the structure and the acoustic cavity is key to the development of both active and passive control technologies. In an initial effort to provide this insight, the objective of this paper is to develop an analytical model of sound transmission through a simple unstiffened cylindrical aluminum shell excited by a TBL pressure field. The description of the turbulent pressure field is based on the Corcos formulation for the cross-spectral density (CSD) of the pressure fluctuations. The coupled shell and interior and exterior acoustic equations are solved for the structural displacement and the interior acoustic response using a Galerkin approach to obtain analytical solutions. Specifically, this study compares the real part of the normalized CSD of the TBL excitation field, the structural displacement and the interior acoustic field. Further the modal compositions of the structural and cavity response are examined and some inference of the dominant mechanism of noise transmission is made.

Tang, Yvette Y.↗
NASA NTRS1996

Sound Transmission through Two Concentric Cylindrical Sandwich Shells

This paper solves the problem of sound transmission through a system of two infinite concentric cylindrical sandwich shells. The shells are surrounded by external and internal fluid media and there is fluid (air) in the annular space between them. An oblique plane sound wave is incident upon the surface of the outer shell. A uniform flow is moving with a constant velocity in the external fluid medium. Classical thin shell theory is applied to the inner shell and first-order shear deformation theory is applied to the outer shell. A closed form for transmission loss is derived based on modal analysis. Investigations have been made for the impedance of both shells and the transmission loss through the shells from the exterior into the interior. Results are compared for double sandwich shells and single sandwich shells. This study shows that: (1) the impedance of the inner shell is much smaller than that of the outer shell so that the transmission loss is almost the same in both the annular space and the interior cavity of the shells; (2) the two concentric sandwich shells can produce an appreciable increase of transmission loss over single sandwich shells especially in the high frequency range; and (3) design guidelines may be derived with respect to the noise reduction requirement and the pressure in the annular space at a mid-frequency range.

Tang, Yvette Y.↗
NASA NTRS1976

On sound transmission into a stiffened cylindrical shell under flight conditions

In the context of airborne-noise transmission through an aircraft fuselage, a mathematical model is presented for sound transmission into a stiffened cylindrical shell. The stiffening effect of the ring frames and stringers is approximated by a 'smeared'-stiffener theory which includes the eccentricity of the stiffeners. Numerical results are presented for a typical narrow-bodied jet in cruising flight. A comparison is made between noise transmission into a monococque shell and into a stiffened shell. The stiffeners are shown to greatly increase TL for small incidence angles, so that the effective 'window' for noise transmission is restricted to the neighborhood of normal incidence. Flow is shown to increase TL for sound waves propagating 'upstream' against the flow. Stiffeners are also shown to raise the ring frequency at which a dip in cylinder TL occurs. Limitations of the 'smeared'-stiffener theory are also discussed.

Koval, L. R.↗
NASA NTRS1996

Sound Transmission through Cylindrical Shell Structures Excited by Boundary Layer Pressure Fluctuations

This paper examines sound transmission into two concentric cylindrical sandwich shells subject to turbulent flow on the exterior surface of the outer shell. The interior of the shells is filled with fluid medium and there is an airgap between the shells in the annular space. The description of the pressure field is based on the cross-spectral density formulation of Corcos, Maestrello, and Efimtsov models of the turbulent boundary layer. The classical thin shell theory and the first-order shear deformation theory are applied for the inner and outer shells, respectively. Modal expansion and the Galerkin approach are used to obtain closed-form solutions for the shell displacements and the radiation and transmission pressures in the cavities including both the annular space and the interior. The average spectral density of the structural responses and the transmitted interior pressures are expressed explicitly in terms of the summation of the cross-spectral density of generalized force induced by the boundary layer turbulence. The effects of acoustic and hydrodynamic coincidences on the spectral density are observed. Numerical examples are presented to illustrate the method for both subsonic and supersonic flows.

Tang, Yvette Y.↗
NASA NTRS1981

Summary of typical parameters that affect sound transmission through general aviation aircraft structures

This paper presents results of a systematic experimental investigation of parameters which affect sound transmission through general aviation structures. Parameters studied include angle of sound incidence, panel curvature, panel stresses, and edge conditions for bare panels; pane thickness, spacing, inclination of window panes, and depressurization for dual pane windows; densities of hard foam and sound absorption materials, air gaps, and trim panel thickness for multilayered panels. Based on the study, some promising methods for reducing interior noise in general aviation airplanes are discussed.

Grosveld, F.↗
NASA NTRS1984

Two dimensional nonlinear analysis of sound transmission through a near-sonic throat flow

A two-dimensional nonlinear theory of sound transmission through a nonuniform duct carrying a near-sonic throat flow is described. The mean flow in the duct is treated according to a generalized quasi-one dimensional model, and the analysis of the unsteady perturbations is carried out using the Method of Matched Asymptotic Expansions. The linearized acoustic field in the subsonic regions of the duct is approximated by a Wave Envelope model which is matched asymptotically with a nonlinear inner solution valid in the near-sonic throat region. Numerical results are presented to illustrate the predictions of the theory. It is found that, in general, shock waves develop in the acoustic field during transmission through the near-sonic flow. Unlike previous one-dimensional theories, the current study shows that dispersion can play a major role in the propagation process.

Myers, M. K.↗
NASA NTRS1992

Active control of sound transmission through stiff lightweight composite fuselage constructions

Work was performed on the active control of sound transmission in composite structures. First, a model was outlined of a vibrating plate with arbitrary boundary conditions. Second, the far field was minimized to radiate acoustic power using secondary force inputs. Third, a model of a simple case of freely mounted stiff lightweight panels was used. Fourth, experimental results for aluminum honeycomb composite panels is presented. Fifth, experimental results are presented for the combination of a clamped steel plate and an aluminum honeycomb panel with secondary forces acting between the partitions. Finally, experimental results for the combination of a clamped steel plate with four secondary aluminum honeycomb panels is presented. All materials are shown in viewgraph format.

Thomas, D. R.↗
NASA NTRS1989

An experimental investigation of the active control of sound transmission into a cylindrical enclosure

Preliminary results are reported from experiments involving the use of vibration sources in the active control of sound transmission into a cylindrical chamber (as in aircraft cabin-noise suppression). Electrodynamic shakers are used to provide vibrational excitation in a 3-m-high 900-mm-diameter cylindrical stainless-steel chamber with damped ends, subjected to single-frequency (384-Hz) sound from a horn driver located 150 mm from the cylinder midway along its length. When vibration is applied only diametrically opposite the source, rotation of the sound field occurs, but global attenuation is not achieved; with additional vibration applied at an angle of 225 deg to the source, moderate reduction of the global field is obtained. The need to identify and control all offending coupled structural/acoustic modes is indicated.

Snyder, S. D.↗