Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPACECRAFT RELIABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Space Vehicle Reliability Modeling in DIORAMA

When modeling system performance of space based detection systems it is important to consider spacecraft reliability. As space vehicles age the components become prone to failure for a variety of reasons such as radiation damage. Additionally, some vehicles may lose the ability to maneuver once they exhaust fuel supplies. Typically failure is divided into two categories: engineering mistakes and technology surprise. This document will report on a method of simulating space vehicle reliability in the DIORAMA framework.

33 ADVANCED PROPULSION SYSTEMS↗

Comparison of experimental data with predictions of various models for silicon and aluminum fragmentation under the effect of high-energy cosmic rays

The accuracy attained in theoretically estimating the yields of isotopes and isobars and their energy, charge, and mass distributions in silicon fragmentation that occurs in spacecraft electronics under the effect of cosmic-ray protons is an important factor in forecasting the probability for single-event upsets in the electronics and the reliability of spacecraft operation in general. In previous studies of our group, it was shown that the results of the calculations are highly sensitive to the choice of parameters for opticalmodel potentials. In addition to cross sections for elastic and inelastic proton scattering and charge, mass, and energy distributions of heavy nuclear-reaction products, the results of our calculations for doubledifferential spectra of protons originating from the interaction of highly energetic (30-400 MeV) protons with aluminum and double-differential spectra of other particles (neutrons and alpha particles) arising in competing channels of the p + {sup 27}Al reaction are also described in the present article. The calculations in question were performed on the basis of the EMPIRE-II-19 code by using various optical-model potentials, including the Becchetti-Greenlees potential for the (p, n) channel, the Wilmore-Hodgson potential for the (p, n) channel, the Madland potential for the (p, p) channel, the Koning-Delaroche potential for the (p, p) channel, and the McFadden-Satchler potential for the (p, {alpha}) channel. A comparative analysis of the double-differential spectra obtained for outgoing protons, neutrons, and alpha particles experimentally and in the calculations of various authors was performed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Introduction to the Demonstration of Pyroshock Response Prediction Methods Using NASA ShockSat Data Virtual Collection

Mechanical shocks, particularly pyroshocks, are environments that all spacecraft and launch vehicles experience. Pyroshocks can be challenging design environments for space hardware because these events are often high frequency, high intensity transients. Furthermore, since design decisions must be made relatively early in the design phase, understanding, and accurately defining pyroshock excitation and the loads that it imparts on components is important to ensure the high reliability required of spacecraft and rockets. Here, general guidelines about shock transmission through spacecraft structures are provided in NASA and MIL handbooks and standards, but these are relatively broad guidelines, and recent studies have shown that more accurate and less-conservative predictions are needed. However, predicting shock response accurately is still a challenge because of the high frequencies in a pyroshock excitation.

Babuska, Vit [Sandia National Laboratories (SNL-NM↗

A 2 MV Van de Graaff accelerator as a tool for planetary and impact physics research

Investigating the dynamical and physical properties of cosmic dust can reveal a great deal of information about both the dust and its many sources. Over recent years, several spacecraft (e.g., Cassini, Stardust, Galileo, and Ulysses) have successfully characterised interstellar, interplanetary, and circumplanetary dust using a variety of techniques, including in situ analyses and sample return. Charge, mass, and velocity measurements of the dust are performed either directly (induced charge signals) or indirectly (mass and velocity from impact ionisation signals or crater morphology) and constrain the dynamical parameters of the dust grains. Dust compositional information may be obtained via either time-of-flight mass spectrometry of the impact plasma or direct sample return. The accurate and reliable interpretation of collected spacecraft data requires a comprehensive programme of terrestrial instrument calibration. This process involves accelerating suitable solar system analogue dust particles to hypervelocity speeds in the laboratory, an activity performed at the Max Planck Institut fuer Kernphysik in Heidelberg, Germany. Here, a 2 MV Van de Graaff accelerator electrostatically accelerates charged micron and submicron-sized dust particles to speeds up to 80 km s{sup -1}. Recent advances in dust production and processing have allowed solar system analogue dust particles (silicates and other minerals) to be coated with a thin conductive shell, enabling them to be charged and accelerated. Refinements and upgrades to the beam line instrumentation and electronics now allow for the reliable selection of particles at velocities of 1-80 km s{sup -1} and with diameters of between 0.05 {mu}m and 5 {mu}m. This ability to select particles for subsequent impact studies based on their charges, masses, or velocities is provided by a particle selection unit (PSU). The PSU contains a field programmable gate array, capable of monitoring in real time the particles' speeds and charges, and is controlled remotely by a custom, platform independent, software package. The new control instrumentation and electronics, together with the wide range of accelerable particle types, allow the controlled investigation of hypervelocity impact phenomena across a hitherto unobtainable range of impact parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Solar Energetic Particle Event of 2010 August 14: Connectivity with the Solar Source Inferred from Multiple Spacecraft Observations and Modeling

We analyze one of the first solar energetic particle (SEP) events of solar cycle 24 observed at widely separated spacecraft in order to assess the reliability of models currently used to determine the connectivity between the sources of SEPs at the Sun and spacecraft in the inner heliosphere. This SEP event was observed on 2010 August 14 by near-Earth spacecraft, STEREO-A (∼80° west of Earth) and STEREO-B (∼72° east of Earth). In contrast to near-Earth spacecraft, the footpoints of the nominal magnetic field lines connecting STEREO-A and STEREO-B with the Sun were separated from the region where the parent fast halo coronal mass ejection (CME) originated by ∼88° and ∼47° in longitude, respectively. We discuss the properties of the phenomena associated with this solar eruption. Extreme ultraviolet and white-light images are used to specify the extent of the associated CME-driven coronal shock. We then assess whether the SEPs observed at the three heliospheric locations were accelerated by this shock or whether transport mechanisms in the corona and/or interplanetary space provide an alternative explanation for the arrival of particles at the poorly connected spacecraft. A possible scenario consistent with the observations indicates that the observation of SEPs at STEREO-B and near Earth resulted from particle injection by the CME shock onto the field lines connecting to these spacecraft, whereas SEPs reached STEREO-A mostly via cross-field diffusive transport processes. The successes, limitations, and uncertainties of the methods used to resolve the connection between the acceleration sites of SEPs and the spacecraft are evaluated.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiation-Induced Noise Resilience of Neuromorphic Architectures

Neuromorphic event-based networks use asynchronous time-dependent information to extract features from input data that can allow for edge-based distributed applications such as object recognition. The noise resilience properties of such networks, especially in the context of space applications, are yet to be explored. In this paper, we use the hierarchy of time surfaces (HOTS) algorithm, which is one of the neuromorphic algorithms, to understand the least and most resilient modules in a neuromorphic network. The HOTS algorithm relies on the computing of time surfaces that maps the temporal delays between neighboring pixels into normalized features that involve many computations that are also found in other neuromorphic networks such as exponential decays, distance computations, etcetera. We implemented HOTS on a Digilent PYNQ board with a Xilinx Zynq 7020 system on a chip, and we subjected the boards running the HOTS network inference to neutron radiation at the Los Alamos Neutron Science Center. Furthermore, we used simulation models from our previous similar experiments on the event-based sensor to create a neutron induced noise model to quantify the effect of this noise on the overall performance of the network. This experiment provides the preliminary measurements of the reliability of the HOTS algorithm and proposes methods to create a more reliable HOTS architecture in future spacecraft missions.

Engineering↗

A DIRECT APPROACH FOR DETERMINING THE PERPENDICULAR MEAN FREE PATH OF SOLAR ENERGETIC PARTICLES IN A TURBULENT AND SPATIALLY VARYING MAGNETIC FIELD

A direct approach for explicitly determining the perpendicular mean free path of solar energetic particles (SEPs) influenced by parallel diffusion and composite dynamical turbulence in a spatially varying magnetic field is presented. As theoretical applications of the direct approach, we investigate the inherent relations between the perpendicular mean free path and various parameters concerning physical properties of SEPs as well as those of interplanetary conditions such as the solar wind and the turbulent magnetic field. Comparisons of the perpendicular mean free paths with and without adiabatic focusing are also presented. The direct method shows encouraging agreement with spacecraft observations, suggesting it is a reliable and useful tool for use in theoretical investigations and space weather forecasting.

79 ASTRONOMY AND ASTROPHYSICS↗

IMPLICATIONS OF THE RECENT LOW SOLAR MINIMUM FOR THE SOLAR WIND DURING THE MAUNDER MINIMUM

The behavior of the Sun and near-Earth space during grand solar minima is not understood; however, the recent long and low minimum of the decadal-scale solar cycle gives some important clues, with implications for understanding the solar dynamo and predicting space weather conditions. The speed of the near-Earth solar wind and the strength of the interplanetary magnetic field (IMF) embedded within it can be reliably reconstructed for before the advent of spacecraft monitoring using observations of geomagnetic activity that extend back to the mid-19th century. We show that during the solar cycle minima around 1879 and 1901 the average solar wind speed was exceptionally low, implying the Earth remained within the streamer belt of slow solar wind flow for extended periods. This is consistent with a broader streamer belt, which was also a feature of the recent low minimum (2009), and yields a prediction that the low near-Earth IMF during the Maunder minimum (1640-1700), as derived from models and deduced from cosmogenic isotopes, was accompanied by a persistent and relatively constant solar wind of speed roughly half the average for the modern era.

79 ASTRONOMY AND ASTROPHYSICS↗

Measuring Atmospheric Gas Using Small Satellites (Final Report)

The research focused on demonstrating that a small satellite (< 10 kg) is able to provide useable data in support of stratospheric circulation and broader atmospheric measurement generally thought to required large, lengthy and high cost space programs. The research goals targeting enabling CubeSats to serve as science platforms including low-cost communication infrastructure, science enabling solar panels and a ruggedized small form factor science instrument were highly successful with demonstrated on-orbit results. The collection of science data on-orbit was not successful due to a high tumbling rate impacted to the spacecraft at time of release on orbit, preventing reliable solar charging and leading to premature ending of the mission. The successes acquired on orbit will act as a springboard for further research and space projects at LLNL. Several research groups (both private and government) have expressed interest in the area of this research that proved successful such as the solar panels and iridium crosslink as well as the LLNL developed CubeSat standard.

42 ENGINEERING↗

Chapter 8: Life-Cycle Testing and Analysis

Prior to a spacecraft launch, program mission assurance standards dictate that the flight battery power system should comply with mission requirements under the intended operating conditions. Ground life cycle testing (LCT) combined with an analysis on the electrical power system (EPS) battery is an empirical method used to demonstrate compliance to satellite service life requirements. The LCT compliance method adopted by the aerospace industry is based on demonstrating a space battery's life expectancy as a part of battery qualification. Real-time cell and lithium-ion battery (LIB) LCT data are commonly used for model inputs to EPS power and energy balance analyses, in LIB reliability analysis estimates, and to support on-orbit spacecraft mission life extension opportunities. This chapter describes the LCT planning steps, process approach, and analysis techniques commonly used to qualify space LIB power systems.

accelerated aging↗

PRECISION POINTING OF IBEX-Lo OBSERVATIONS

Post-launch boresight of the IBEX-Lo instrument on board the Interstellar Boundary Explorer (IBEX) is determined based on IBEX-Lo Star Sensor observations. Accurate information on the boresight of the neutral gas camera is essential for precise determination of interstellar gas flow parameters. Utilizing spin-phase information from the spacecraft attitude control system (ACS), positions of stars observed by the Star Sensor during two years of IBEX measurements were analyzed and compared with positions obtained from a star catalog. No statistically significant differences were observed beyond those expected from the pre-launch uncertainty in the Star Sensor mounting. Based on the star observations and their positions in the spacecraft reference system, pointing of the IBEX satellite spin axis was determined and compared with the pointing obtained from the ACS. Again, no statistically significant deviations were observed. We conclude that no systematic correction for boresight geometry is needed in the analysis of IBEX-Lo observations to determine neutral interstellar gas flow properties. A stack-up of uncertainties in attitude knowledge shows that the instantaneous IBEX-Lo pointing is determined to within {approx}0.{sup 0}1 in both spin angle and elevation using either the Star Sensor or the ACS. Further, the Star Sensor can be used to independently determine the spacecraft spin axis. Thus, Star Sensor data can be used reliably to correct the spin phase when the Star Tracker (used by the ACS) is disabled by bright objects in its field of view. The Star Sensor can also determine the spin axis during most orbits and thus provides redundancy for the Star Tracker.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of gamma radiation on micromechanical hardness of lead-free solder joint

Lead-free solders are important material in nano and microelectronic surface mounting technology for various applications in bio medicine, environmental monitoring, spacecraft and satellite instrumentation. Nevertheless solder joint in radiation environment needs higher reliability and resistance to any damage caused by ionizing radiations. In this study a lead-free 99.0Sn0.3Ag0.7Cu wt.% (SAC) solder joint was developed and subjected to various doses of gamma radiation to investigate the effects of the ionizing radiation to micromechanical hardness of the solder. Averaged hardness of the SAC joint was obtained from nanoindentation test. The results show a relationship between hardness values of indentations and the increment of radiation dose. Highest mean hardness, 0.2290 ± 0.0270 GPa was calculated on solder joint which was exposed to 5 Gray dose of gamma radiation. This value indicates possible radiation hardening effect on irradiated solder. The hardness gradually decreased to 0.1933 ± 0.0210 GPa and 0.1631 ± 0.0173 GPa when exposed to doses 50 and 500 gray respectively. These values are also lower than the hardness of non irradiated sample which was calculated as 0.2084 ± 0.0.3633 GPa indicating possible radiation damage and needs further related atomic dislocation study.

36 MATERIALS SCIENCE↗

Evolution of pores in the fuel cladding of the electrogenerating channel

The results of reactor tests of carbonitride fuel in a monocrystalline cladding from a molybdenum-based alloy that were carried out earlier on an experimental setup Ya-82 for 8 to 300 h at a temperature of ∼1500°C can be used in order to prove the operational reliability of fuel elements in the design of a megawatt nuclear power plant for a spacecraft. A raster image of the surface of a sample of cladding shows that the interfaces between the layers are decorated by pores. This result is explained in this work by the theory of coalescence. The mechanisms responsible for the evolution of pores taking place at the parameters of a Ya-82 setup are considered. The effect of decoration by pores of the interfaces between the layers of a sample of cladding of the electrogenerating channel by carrying out reactor tests is explained. The dependence of the average radius of pores on the duration of the experiment is obtained. An evaluation of the average sizes of pores arising under the conditions of the experiment gives a value of ∼2 μm, which is in agreement with the experimental data. A computational study of swelling of the cladding material in the process of irradiation is performed. Predictive estimates of the behavior of the porous system and swelling of the cladding material for a megawatt class nuclear power plant are made.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quasi-thermal noise in space plasma: 'kappa' distributions

The transport of energy in collisionless plasmas, especially in space plasmas, is far from being understood. Measuring the temperature of the electrons and their nonthermal properties can give important clues to understand the transport properties. Quasi-thermal noise (QTN) spectroscopy is a reliable tool for measuring accurately the electron density and temperature since it is less sensitive to the spacecraft perturbations than particle detectors. This work models the plasma QTN using a generalized Lorentzian ('kappa') distribution function for the electrons. This noise is produced by the quasi-thermal fluctuations of the electrons and by the Doppler-shifted thermal fluctuations of the ions. A sum of two Maxwellian functions has mainly been used for modeling the QTN of the electrons, but the observations have shown that the electrons are better fitted by a kappa distribution function. Pioneer work on QTN calculation only considered integer values of {kappa}. This paper extends these calculations to real values of {kappa} and gives the analytic expressions and numerical calculations of the QTN with a kappa distribution function. This paper shows some generic properties and gives some practical consequences for plasma wave measurements in space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bright microwave pulses from PSR B0531+21 observed with a prototype transient survey receiver

Recent discoveries of transient radio events have renewed interest in time-variable astrophysical phenomena. Many radio transient events are rare, requiring long observing times for reliable statistical study. The National Aeronautics and Space Administration/Jet Propulsion Laboratory's Deep Space Network (DSN) tracks spacecraft nearly continuously with 13 large-aperture, low system temperature radio antennas. During normal spacecraft operations, the DSN processes only a small fraction of the pre-detection bandwidth available from these antennas; any information in the remaining bandwidth, e.g., from an astronomical source in the same antenna beam as the spacecraft, is currently ignored. As a firmware modification to the standard DSN tracking receiver, we built a prototype receiver that could be used for astronomical transient surveys. Here, we demonstrate the receiver's utility through observations of bright pulses from the Crab pulsar and describe attributes of potential transient survey observations piggybacking on operational DSN tracks.

79 ASTRONOMY AND ASTROPHYSICS↗

Spark Plasma Sintering of Ultracapacitors

A solid-state ultracapacitor module to replace standard electrochemical batteries would achieve major performance gains and mass/volume reduction. This report summarizes a project to evaluate an alternative sintering process to produce a solid-state ultracapacitor to overcome the limitations of both the electrochemical batteries presently in use on spacecraft and of currently available electrochemical ultracapacitors. It will provide a robust energy storage device with higher reliability, wider working temperature range, longer lifetime, and less weight and volume than electrochemical batteries. As modern electronics decrease in size, more efficient and robust remote power is needed. Current state-of-the-art rechargeable batteries cannot be rapidly charged, contain harmful chemicals, and suffer from early wear-out mechanisms. Solid-state ultracapacitors are recyclable energy storage devices that offer the promise of higher power and a greater number of charge/discharge cycles than current rechargeable batteries. In addition, the theoretical energy density when compared to current electrochemical batteries indicates that a significant weight savings is possible. This is a project to develop a very high density solid-state ultracapacitor with giant permittivity and acceptable dielectric loss to overcome the energy-density barrier such that it will be a suitable replacement for batteries.

25 ENERGY STORAGE↗

FIRST MEASUREMENTS OF THE MASS OF CORONAL MASS EJECTIONS FROM THE EUV DIMMING OBSERVED WITH STEREO EUVI A+B SPACECRAFT

The masses of coronal mass ejections (CMEs) have traditionally been determined from white-light coronagraphs (based on Thomson scattering of electrons), as well as from extreme ultraviolet (EUV) dimming observed with one spacecraft. Here we develop an improved method of measuring CME masses based on EUV dimming observed with the dual STEREO/EUVI spacecraft in multiple temperature filters that includes three-dimensional volume and density modeling in the dimming region and background corona. As a test, we investigate eight CME events with previous mass determinations from STEREO/COR2, of which six cases are reliably detected with the Extreme Ultraviolet Imager (EUVI) using our automated multi-wavelength detection code. We find CME masses in the range of m {sub CME} = (2-7) x 10{sup 15} g. The agreement between the two EUVI/A and B spacecraft is m{sub A} /m{sub B} = 1.3 +- 0.6 and the consistency with white-light measurements by COR2 is m{sub EUVI}/m{sub COR2} = 1.1 +- 0.3. The consistency between EUVI and COR2 implies no significant mass backflows (or inflows) at r < 4 R{sub sun} and adequate temperature coverage for the bulk of the CME mass in the range of T approx 0.5-3.0 MK. The temporal evolution of the EUV dimming allows us to also model the evolution of the CME density n{sub e} (t), volume V(t), height-time h(t), and propagation speed v(t) in terms of an adiabatically expanding self-similar geometry. We determine e-folding EUV dimming times of t{sub D} = 1.3 +- 1.4 hr. We test the adiabatic expansion model in terms of the predicted detection delay (DELTAt approx 0.7 hr) between EUVI and COR2 for the fastest CME event (2008 March 25) and find good agreement with the observed delay (DELTAt approx 0.8 hr).

79 ASTRONOMY AND ASTROPHYSICS↗

IRREGULAR SATELLITES OF THE OUTER PLANETS: ORBITAL UNCERTAINTIES AND ASTROMETRIC RECOVERIES IN 2009-2011

More than 100 small satellites have been identified orbiting the giant planets in distant, inclined, eccentric orbits. Detailed study of these objects requires that their orbits be known well enough to permit routine observations both from the Earth and from spacecraft. Unfortunately, many of the satellites have very poorly known orbits due to a scarcity of astrometric measurements. We have developed a reliable method to estimate the future on-sky position uncertainties of the satellites and have verified that those uncertainties provide a correct measure of the true on-sky positional uncertainty. Based on the uncertainties, we identified a set of satellites that are effectively 'lost' and another set that would be lost if additional observations were not obtained in the near future. We attempted recoveries of 26 of the latter group using the Hale 5 m and CFHT 3.6 m telescopes and found 23. This validated our method's predictions and led to significant improvements in our knowledge of the orbits of the recovered moons. There remains a handful of irregular moons which are recoverable and whose orbits will benefit from additional observations during the next decade, while 16 moons of Jupiter and Saturn are essentially lost and will require a re-survey to be located again.

79 ASTRONOMY AND ASTROPHYSICS↗