Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPEX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

SPEX Airborne Spectropolarimeter Calibration and Performance

To improve our understanding of the complex role of aerosols in the climate system and on air quality, measurements are needed of optical and microphysical aerosol. From many studies, it has become evident that a satellite-based multiangle, multiwavelength polarimeter will be essential to provide such measurements. Here, high accuracy (∼0.003) on the degree of linear polarization (DoLP) measurements is important to retrieve aerosol properties with an accuracy needed to advance our understanding of the aerosol effect on climate. SPEX airborne, a multiangle hyperspectral polarimeter, has been developed for observing and characterizing aerosols from NASA’s high-altitude research aircraft ER-2. It delivers measurements of radiance and DoLP at visual wavelengths with a spectral resolution of 3 and 7–30 nm, respectively, for radiance and polarization, at nine fixed equidistant viewing angles from −56° to +56° oriented along the ground track, and a swath of 7° oriented across-track. SPEX airborne uses spectral polarization modulation to determine the state of linear polarization of scattered sunlight. This technique has been developed in the Netherlands and has been demonstrated with ground-based instruments. SPEX airborne serves as a demonstrator for a family of space-based SPEX instruments that have the ability to measure and characterize atmospheric aerosol by multiangle hyperspectral polarimetric imaging remotely from a satellite platform. SPEX airborne was calibrated radiometrically and polarimetrically using Jet Propulsion Laboratory (JPL) facilities including the Polarization Stage Generator-2 (PSG-2), which is designed for polarimetric calibration and validation of the Airborne Multiangle SpectroPolarimetric Imager (AirMSPI). Using the PSG-2, the accuracy of the SPEX airborne DoLP measurements in the laboratory setup is found to be 0.002–0.004. Radiometric calibration is realized with an estimated accuracy of 4%. In 2017, SPEX airborne took part in the “Aerosol Characterization from Polarimeters and Lidar” campaign on the ER-2 that included four polarimeters and two lidars. Polarization measurements of SPEX airborne and the coflying Research Scanning Polarimeter (RSP), recorded during the campaign, were compared and display root-mean-square (RMS) differences ranging from 0.004 (at 555 nm) up to 0.02 (at 410 nm). For radiance measurements, excellent agreement between SPEX airborne and RSP is obtained with an RMS difference of ∼4%. The lab- and flight-performance values for polarization are similar to those recently published for AirMSPI, where also an intercomparison with RSP was made using data from field campaigns in 2013. The intercomparison of radiometric and polarimetric data both display negligible bias. The in-flight comparison results provide verification of SPEX airborne’s capability to deliver high-quality data.

Aerosols↗
NASA NTRS2015

Spectral Aerosol Extinction (SpEx): A New Instrument for In situ Ambient Aerosol Extinction Measurements Across the UV/Visible Wavelength Range

We introduce a new instrument for the measurement of in situ ambient aerosol extinction over the 300-700 nm wavelength range, the Spectral Aerosol Extinction (SpEx) instrument. This measurement capability is envisioned to complement existing in situ instrumentation, allowing for simultaneous measurement of the evolution of aerosol optical, chemical, and physical characteristics in the ambient environment. In this work, a detailed description of the instrument is provided along with characterization tests performed in the laboratory. Measured spectra of NO2 and polystyrene latex spheres agreed well with theoretical calculations. Good agreement was also found with simultaneous aerosol extinction measurements at 450, 530, and 630 nm using CAPS PMex instruments in a series of 22 tests including non-absorbing compounds, dusts, soot, and black and brown carbon analogs. SpEx can more accurately distinguish the presence of brown carbon from other absorbing aerosol due to its 300 nm lower wavelength limit compared to measurements limited to visible wavelengths. In addition, the spectra obtained by SpEx carry more information than can be conveyed by a simple power law fit that is typically defined by the use of Angstrom Exponents. Future improvements aim at lowering detection limits and ruggedizing the instrument for mobile operation.

Jordan, C. E.↗
NASA NTRS2006

RTF+SpeX Near-IR Images and Spectra of the Moon Pre-impact and at Impact of SMART-1

We present SpeX 0.8-2.5 micron spectra and Br-gamma or J H or K-band images of the Moon on 2006 July 10 UT, 2006 Sep 1 UT, and 2006 Sep 3 UT. The first two dates are data taken in preparation (near Full Moon and 1 st quarter Moon) for observing the impact of ESA's SMART-1 Lunar satellite on 2006 Sep 3 UT. We hope to be presenting images (about 1 arc minute by 1 arc minute), and low resolution (Prism mode) spectra of the SMART-1 impact to be taken with the 60 arc second long slit.

Wooden, Diane H.↗
NASA NTRS2021

Observations of Phobos and Deimos with SpeX at NASA Infrared Telescope Facility

We measured near-infrared (NIR) reflectance spectra of Phobos and Deimos, using the prism (0.7–2.52 μm) and long-wavelength cross dispersed (LXD: 1.9–4.2 μm) modes of NASA Infrared Telescope Facility (IRTF)’s SpeX instrument. The goal of this study is to investigate the surface composition of Phobos and Deimos and search for any mineralogical absorption signatures that may be present on their surfaces, especially in the LXD spectral range. Prism spectra of Phobos showed significant slope variation at shorter wavelengths (λ <1.3 μm), which indicates surface heterogeneity possibly due to regolith’s composition and grain size, and/or space weathering. Deimos’ prism spectra were found to be consistent with the more red-sloped prism spectra of Phobos. The measured LXD spectra of Deimos revealed evidence of hydration with 3-μm band depths at 2.90 μm of 4–5%. The 3-μm band in Deimos could be attributed to exogenic sources such as solar wind implantation or OH-bearingimpactors, or to an endogenic source and the presence of carbonaceous material on its surface. Phobos’ andDeimos’ prism and LXD spectra, however, show no indications for absorption signatures of mafic silicates (i.e.,pyroxene, olivine), organics nor carbonates.

D Takir↗
NASA NTRS2020

Aerosol Retrievals from Different Polarimeters During the ACEPOL Campaign Using a Common Retrieval Algorithm

In this paper, we present aerosol retrieval results from the ACEPOL (Aerosol Characterization from Polarimeter and Lidar) campaign, which was a joint initiative between NASA and SRON – the Netherlands Institute for Space Research. The campaign took place in October–November 2017 over the western part of the United States. During ACEPOL six different instruments were deployed on the NASA ER-2 high-altitude aircraft, including four multi-angle polarimeters (MAPs): SPEX airborne, the Airborne Hyper Angular Rainbow Polarimeter (AirHARP), the Airborne Multi-angle SpectroPolarimetric Imager (AirMSPI), and the Research Scanning Polarimeter (RSP). Also, two lidars participated: the High Spectral Resolution Lidar-2 (HSRL-2) and the Cloud Physics Lidar (CPL). Flights were conducted mainly for scenes with low aerosol load over land, but some cases with higher AOD were also observed. We perform aerosol retrievals from SPEX airborne, RSP (410–865 nm range only), and AirMSPI using the SRON aerosol retrieval algorithm and compare the results against AERONET (AErosol RObotic NETwork) and HSRL-2 measurements (for SPEX airborne and RSP). All three MAPs compare well against AERONET for the aerosol optical depth (AOD), with a mean absolute error (MAE) between 0.014 and 0.024 at 440 nm. For the fine-mode effective radius the MAE ranges between 0.021 and 0.028 µm. For the comparison with HSRL-2 we focus on a day with low AOD (0.02–0.14 at 532 nm) over the California Central Valley, Arizona, and Nevada (26 October) as well as a flight with high AOD (including measurements with AOD>1.0 at 532 nm) over a prescribed forest fire in Arizona (9 November). For the day with low AOD the MAEs in AOD (at 532 nm) with HSRL-2 are 0.014 and 0.022 for SPEX and RSP, respectively, showing the capability of MAPs to provide accurate AOD retrievals for the challenging case of low AOD over land. For the retrievals over the smoke plume a reasonable agreement in AOD between the MAPs and HSRL-2 was also found (MAE 0.088 and 0.079 for SPEX and RSP, respectively), despite the fact that the comparison is hampered by large spatial variability in AOD throughout the smoke plume. A good comparison is also found between the MAPs and HSRL-2 for the aerosol depolarization ratio (a measure of particle sphericity), with an MAE of 0.023 and 0.016 for SPEX and RSP, respectively. Finally, SPEX and RSP agree very well for the retrieved microphysical and optical properties of the smoke plume.

Fu, Guangliang↗
NASA NTRS2020

Telescopic Observations of Lunar Hydration: Variations and Abundance

Prior to 2009, the Moon was believed to be anhydrous. However, observations by three spacecraft revealed a hydrated surface by reporting a 3 μm absorption band attributed to hydroxyl and possibly molecular water. The Moon Mineralogy Mapper (M3) spectrometer, onboard the Chandrayaan-1 spacecraft is mainly used to study the lunar 3 μm band but its spectral range ends at 3 μm. The limited wavelength range of M3 has allowed observed variations in the 3 μm band to be called into question due to uncertainties in thermal corrections. To investigate the validity of variations in the lunar 3 μm band, we used the SpeX infrared spectrograph at the NASA InfraRed Telescope Facility at Maunakea Observatory in Hawaiʻi. With SpeX, we are able to obtain lunar data over a wavelength range of 1.67 to 4.2 μm at 1 – 2 km spatial resolution. The long wavelengths provide strong constraints on thermal emission corrections. We confirm that the 3 μm band varies with lunar time of day as well as with latitude and composition. Each observation reveals strong variations in abundances of hydroxyl and possibly molecular water. The data reveal a decrease in abundance with increasing lunar local time, an asymmetric trend about the equator that favors the southern latitudes, and higher concentrations in highland regions. The longer wavelengths provided by SpeX have allowed us to examine variations in the 3 μm band and provide definitive evidence that the variations are due to changes in hydration.

C. I. Honniball↗
NASA NTRS2020

Inversion of multiangular polarimetric measurements from the ACEPOL campaign: an application of improving aerosol property and hyperspectral ocean color retrievals

NASA's Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission, scheduled for launch in the time frame of late 2022 to early 2023, will carry the Ocean Color Instrument (OCI), a hyperspectral scanning radiometer, and two multiangle polarimeters (MAPs), the UMBC Hyper-Angular Rainbow Polarimeter 2 (HARP2) and the SRON Spectro-Polarimeter for Planetary EXploration one (SPEXone). One purpose of the PACE MAPs is to better characterize aerosol properties, which can then be used to improve atmospheric correction for the retrieval of ocean color in coastal waters. Though this is theoretically promising, the use of MAP data in the atmospheric correction of colocated hyperspectral ocean color measurements have not yet been well demonstrated. In this work, we performed aerosol retrievals using the MAP measurements from the Research Scanning Polarimeter (RSP) and demonstrate its application to the atmospheric correction of hyperspectral radiometric measurements from SPEX airborne. Both measurements were collected on the same aircraft from the Aerosol Characterization from Polarimeter and Lidar (ACEPOL) field campaign in 2017. Two cases over ocean with small aerosol loading (aerosol optical depth ∼0.04) are identified including colocated RSP and SPEX airborne measurements and Aerosol Robotic Network (AERONET) ground-based observations. The aerosol retrievals are performed and compared with two options: one uses reflectance measurement only and the other uses both reflectance and polarization. It is demonstrated that polarization information helps reduce the uncertainties of aerosol microphysical and optical properties. The retrieved aerosol properties are then used to compute the contribution of atmosphere and ocean surface for atmospheric correction over the discrete bands from RSP measurements and the hyperspectral SPEX airborne measurements. The water-leaving signals determined this way are compared with both AERONET and Moderate Resolution Imaging Spectroradiometer (MODIS) ocean color products for performance analysis. The results and lessons learned from this work will provide a basis to fully exploit the information from the unique combination of sensors on PACE for aerosol characterization and ocean ecosystem research.

Meng Gao↗
NASA NTRS2006

Is the tail of 73P-B/Schwassman-Wachman 1 chasing its Remnant Nucleus?

We report on imaging observations of comets 73P-B/Schwassmann-Wachmann 1 and 73P-C/Schwassmann-Wachmann 1 at the IRTF with SpeX (J, K) and MRSI (10 micron narrow band filter set) on 2006 Apr 17-19 UT and 2006 Jun 18-19, and at the VLT with VISIR (1 0 micron narrow band filters, 20 micron) on 2006 Apr 17 UT. Compared to when the comet was in the midst of breaking up in mid-April, in June the tail of 73P-B is much fainter and there is a compact coma detected well separated and ahead of its tail, and fainter than the tail. The width of the tail in J, K, and 10 micron images indicates that the pieces that were shed in April must still be outgassing and releasing small particles into the tail-shaped coma; small grains have relatively short lifetimes in the coma due to radiation pressure. The trailing tail is now well separated from the faint "leader of the pack" compact coma that we suppose is a remaining piece of the nucleus. It will be interesting to see post-perihelion if this "leading compact coma" object continues to gain distance on the debris and continues to weakly outgas and shed small grains. One wonders if it expended its volatiles (available to the surface) in breaking up; a short-lived release of volatiles occurred in the Deep Impact event with comet 9P/Tempel 1. 73P-C is extended with a more elongated coma structure closer to perihelion compared to 2006 Apr 18- 19 UT. The SEDs from 2006 Apr and Jun from SpeX-MIRSI (IRTF) are compared with VISIR (VLT) SEDs from 2006 Apr. Information on the heliocentric dependence of the activity and dust release yields insights into the origin of activity and the relationship between activity and grain size distribution/mineralogy.

Wooden, D. H.↗
NASA NTRS2021

Atmospheric Correction Over Ocean for Hyperspectral Radiometers Using Multi-Angle Polarimetric Retrievals

We developed a fast and accurate POLYnomial based Atmospheric Correction (POLYAC) algorithm for hyperspectral radiometric measurements, which parameterizes the atmospheric path radiances using aerosol properties retrieved from co-located multi-wavelength Multi-Angle Polarimeter (MAP) measurements. This algorithm has been applied to co-located Spectrometer for Planetary Exploration (SPEX) airborne and Research Scanning Polarimeter (RSP) measurements, where SPEX airborne was used as a proxy of hyperspectral radiometers, and RSP as the MAP. The hyperspectral remote sensing reflectance obtained from POLYAC is accurate when compared to Aerosol Robotic Network (AERONET), and Visible Infrared Imaging Radiometer Suite (VIIRS) ocean color products. POLYAC provides a robust alternative atmospheric correction algorithm for hyperspectral or multi-spectral radiometric measurements for scenes involving coastal oceans and/or absorbing aerosols, where traditional atmospheric correction algorithms are less reliable.

ocean color↗
NASA NTRS2024

Detection of Hydration on Nominally Anhydrous S-Complex Main Belt Asteroids

We present the results of a survey of nominally anhydrous Main Belt S-complex asteroids. Thirty-three observations of 29 unique asteroids were obtained using the IRTF+SpeX instrument in prism and LXD short modes. We report for the first time that S-complex main belt asteroids have 3-μm features. The majority of the observations (27 of 33) have a detectable 3-μm feature that is at least 1% band depth or greater (within error), indicating the presence of hydration. Most of the asteroids have bands of 1 –2.5% depth but a notable fraction (9 of the observations) have band depths of >5%. These band depths are comparable with low albedo asteroids in the mid and outer belt that experienced aqueous alteration. We investigate the origin of the hydration, searching for correlations with orbital, physical and circumstantial parameters. However, we do not find any strong or moderate correlations with 3-μm band depth, indicating multiple factors may be at play, including exogenic sources, primordial water and/or solar wind implantation. Additionally, we report the mineralogies of the asteroids, derived from the prism observations.

Main Belt S-complex asteroids↗
NASA NTRS2024

Detection of Hydration on Nominally Anhydrous S-Complex Main Belt Asteroids

We present the results of a survey of nominally anhydrous main belt S-complex asteroids. Thirty-three observations of 29 unique asteroids were obtained using the IRTF+SpeX instrument in prism and LXD short modes. We report for the first time that S-complex main belt asteroids have 3μm features. The majority of the observations(27 of 33)have a detectable 3μm feature that has at least 1% band depth or greater (within error), indicating the presence of hydration. Most of the asteroids have bands of 1%–2.5% depth, but a notable fraction (nine of the observations) have band depths of>5%. These band depths are comparable to those of low albedo asteroids in the middle and outer belt that have experienced aqueous alteration. We investigate the origin of the hydration, searching for correlations with orbital, physical, and circumstantial parameters. However, we do not find any strong or moderate correlations with 3μm band depth, indicating that multiple factors may be at play, including exogenic sources, primordial water, and/or solar wind implantation. Additionally, we report the mineralogies of the asteroids, derived from the prism observations.

Main Belt S-complex asteroids↗
NASA NTRS1978

An economical approach to space power systems

Projected energy demand for all NASA, DoD and civil missions for the time span 1981 to 1995 are illustrated. Typical energy cost range from about $300 to $2000 per kW-hr, with an average of about $800 per kW-hr for long-duration missions. At these levels, the cost of the required energy would be several billion dollars per year by about 1985 and might constrain the number and types of NASA programs to be carried out. NASA is extensively pursuing approaches for reducing nonrecurring costs. Two programs are presented for the development of an economical approach to space power systems. They are: (1) Economical Orbital Power (ECOP) with the objective to demonstrate the applicability of a commercial approach to the development of a low cost photovoltaic space power system; and (2) Space Power Experiment (SPEX) which has the objective to demonstrate the application of industrial hardware for space power systems.

Teren, F.↗
NASA NTRS1987

Raman spectra of adsorbed layers on space shuttle and AOTV thermal protection system surface

Surfaces of interest to space vehicle heat shield design were struck by a 2 W argon ion laser line while subjected to supersonic arc jet flow conditions. Emission spectra were taken at 90 deg to the angle of laser incidence on the test object. Results showed possible weak Raman shifts which could not be directly tied to any particular parameter such as surface temperature or gas composition. The investigation must be considered exploratory in terms of findings. Many undesirable effects were found and corrected as the project progressed. For instance, initial spectra settings led to ghosts which were eliminated by closing the intermediate of filter slit of the Spex from 8 to 3 mm. Further, under certain conditions, plasma lines from the laser were observed. Several materials were also investigated at room temperature for Raman shifts. Results showed Raman shifts for RCC and TEOS coated materials. The HRSI materials showed only weak Raman shifts, however, substantial efforts were made in studying these materials. Baseline materials showed the technique to be sound. The original goal was to find a Raman shift for the High-temperature Reusable Surface Insulation (HRSI) Reaction Cured borosilicate Glass (RCG) coated material and tie the amplitude of this peak to Arc jet conditions. Weak Raman shifts may be present, however, time limitations prevented confirmation.

Willey, Ronald J.↗
NASA NTRS1992

Raman spectra of seven interplanetary dust particles

The Raman shift spectra of seven interplanetary dust particles, U2034(F10), U2034(F8), U2022(B1), W7074 18, W7074 C15, W7074 C3 and W7074 A7, were measured with a Spex-1403 Raman spectrograph. The exciting radiations were the 488 nm and 514 nm line of a 5W argon ion laser. All seven spectra exhibit the 1350 and 1600 Delta/cm arbon bands, implying that the Interplanetary dust particles were coated with hydrocarbon and incompletely crystallized carbon, the part of which may be the residue of hydrocarbon contents in the particles after water loss by the heating during their entry into the earth's atmosphere. A weak band structure in the 520-610/cm range could be caused by cyclosilicates, and a weak band at 2900/cm is tentatively identified as due to hydrocarbon molecules.

Xu, Yin-Lin↗
NASA NTRS1993

Scanning tunneling microscopy studies of diamond films and optoelectronic materials

In this report, we report on progress achieved from 12/1/92 to 10/1/93 under the grant entitled 'Scanning Tunneling Microscopy Studies of Diamond Films and Optoelectronic Materials'. We have set-up a chemical vapor deposition (CVD) diamond film growth system and a Raman spectroscopy system to study the nucleation and growth of diamond films with atomic resolution using scanning tunneling microscopy (STM). A unique feature of the diamond film growth system is that diamond films can be transferred directly to the ultrahigh vacuum (UHV) chamber of a scanning tunneling microscope without contaminating the films by exposure to air. The University of North Texas (UNT) provided $20,000 this year as matching funds for the NASA grant to purchase the diamond growth system. In addition, UNT provided a Coherent Innova 90S Argon ion laser, a Spex 1404 double spectrometer, and a Newport optical table costing $90,000 to set-up the Raman spectroscopy system. The CVD diamond growth system and Raman spectroscopy system will be used to grow and characterize diamond films with atomic resolution using STM as described in our proposal. One full-time graduate student and one full-time undergraduate student are supported under this grant. In addition, several graduate and undergraduate students were supported during the summer to assist in setting-up the diamond growth and Raman spectroscopy systems. We have obtained research results concerning STM of the structural and electronic properties of CVD grown diamond films, and STM and scanning tunneling spectroscopy of carbon nanotubes. In collaboration with the transmission electron microscopy (TEM) group at UNT, we have also obtained results concerning the optoelectronic material siloxene. These results were published in refereed scientific journals, submitted for publication, and presented as invited and contributed talks at scientific conferences.

Perez, Jose M.↗
NASA NTRS1996

Development of Low Density Titanium Alloys for Structural Applications

In this report the results of a program designed to reduce the density of titanium by adding magnesium are presented. Because these two elements are immiscible under conventional ingot metallurgy techniques, two specialized powder metallurgy methods namely, mechanical alloying (MA) and physical vapor deposition (PVD) were implemented. The mechanical alloying experiments were done both at the University of Idaho and at the Defense Research Agency in UK. Since titanium is reactive with interstitial elements, a secondary goal of this research was to correlate solubility extensions with interstitial contamination content, especially oxygen and nitrogen. MA was carried out in SPEX 8000 shaker mils and different milling containers were utilized to control the level of contamination. Results showed that solubilities of Mg in Ti were obtained up to 28 at.% (16.4 wt. %) Mg in Ti for Ti-39.6 at. % (25 wt. %) Mg alloys, which greatly exceed those obtained under equilibrium conditions. This reflects a density reduction of approximately 26 %. Contamination of oxygen and nitrogen seemed to increase the solubility of magnesium in titanium in some cases; however, we were not able to make a clear correlation between contamination levels with solubilities. Work at the DRA has emphasized optimization of present PVD equipment, specifically composition and temperature control. Preliminary PVD data has shown Ti-Mg deposits have successfully been made up to 2 mm thick and that solubility extensions were achieved. The potential for density reduction of titanium by alloying with magnesium has been demonstrated; however, this work has only scratched the surface of the development of such low density alloys. Much research is needed before such alloys could be implemented into industry. Further funding is required in order to optimize the MA/PVD processes including contamination control, determination of optimal alloy compositions, microstructure development, and mechanical property determination.

Froes, F. H.↗