Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

SPL 7 and SPL 8 represent a novel flowering regulation mechanism in switchgrass

Summary The aging pathway in flowering regulation is controlled mainly by micro RNA 156 (miR156). Studies in Arabidopsis thaliana reveal that nine miR156‐targeted SQUAMOSA PROMOTER BINDING ‐ LIKE ( SPL ) genes are involved in the control of flowering. However, the roles of SPL s in flowering remain elusive in grasses. Inflorescence development in switchgrass was characterized using scanning electron microscopy ( SEM ). Microarray, quantitative reverse transcription polymerase chain reaction (q RT ‐ PCR ), chromatin immunoprecipitation (Ch IP )‐ PCR and EMSA were used to identify regulators of phase transition and flowering. Gene function was characterized by downregulation and overexpression of the target genes. Overexpression of SPL 7 and SPL 8 promotes flowering, whereas downregulation of individual genes moderately delays flowering. Simultaneous downregulation of SPL 7 / SPL 8 results in extremely delayed or nonflowering plants. Furthermore, downregulation of both genes leads to a vegetative‐to‐reproductive reversion in the inflorescence, a phenomenon that has not been reported in any other grasses. Detailed analyses demonstrate that SPL 7 and SPL 8 induce phase transition and flowering in grasses by directly upregulating SEPALLATA3 ( SEP 3 ) and MADS 32 . Thus, the SPL 7 / 8 pathway represents a novel regulatory mechanism in grasses that is largely different from that in Arabidopsis . Additionally, genetic modification of SPL 7 and SPL8 results in much taller plants with significantly increased biomass yield and sugar release.

Gou, Jiqing↗
DOE OSTI2026

Sample Preparation Laboratory (SPL) Best Practices: CGD as the Primary Acceptance Method

The traditional paradigm applied to the construction of nuclear safety related systems, structures, and components (SSCs), like SPL, involves an owner/licensee hiring an EPC firm with an NQA 1 program to manage the engineering, procurement, and construction of the desired SSC. This traditional approach would have posed significant barriers to the successful completion of the SPL. As a smaller capital project, in the $\$$100–$\$$200 million range, there was concern that employing one of the larger EPC companies would escalate costs and extend the projected schedule beyond what would be feasible for the Department of Energy (DOE). The traditional acceptance method employed for nuclear facilities with credited safety functions requires the use of an EPC firm applying American Society of Mechanical Engineers (ASME) NQA 1 nuclear quality assurance (NQA) to accept safety SSCs. In lieu of this approach, INL elected to apply its own NQA 1 program to hire an EPC firm operating a commercial quality program. This method used commercial grade dedication (CGD) as outlined in NQA 1 which had not been applied at this scale. Use of the commercial supply chain was identified as a key factor to the successful completion of SPL. Favorable conditions enabling the use of CGD included: • INL serving as both the designer and the design authority • Design created by an NQA 1 qualified source • A mature CGD program • Availability of a CGD subject matter expert (SME) • A strong construction management program. This white paper elaborates on the methodology employed in the construction of the SPL, the successes achieved, and best practices implemented.

42 - ENGINEERING↗
DOE OSTI2023

Ionic Liquid-Mediated Scanning Probe Electro-Oxidative Lithography as a Novel Tool for Engineering Functional Oxide Micro- and Nano-Architectures

Functional oxides have extensively been investigated as a promising class of materials in a broad range of innovative applications. Harnessing the novel properties of functional oxides in micro- to nano-scale applications hinges on establishing advanced fabrication and manufacturing techniques able to synthesize these materials in an accurate and reliable manner. Oxidative scanning probe lithography (o-SPL), an atomic force microscopy (AFM) technique based on anodic oxidation at the water meniscus formed at the tip/substrate contact, not only combines the advantages of both “top-down” and “bottom-up” fabrication approaches, but also offers the possibility of fabricating oxide nanomaterials with high patterning accuracy. While the use of self-assembled monolayers (SAMs) broadened the application of o-SPL, significant challenges have emerged owing to the relatively limited number of SAM/solid surface combinations that can be employed for o-SPL, which constrains the ability to control the chemistry and structure of oxides formed by o-SPL. Here, in this work, a new o-SPL technique that utilizes room-temperature ionic liquids (RTILs) as the functionalizing material to mediate the electrochemistry at AFM tip/substrate contacts is reported. The results show that the new IL-mediated o-SPL (IL-o-SPL) approach allows sub-100 nm oxide features to be patterned on a model solid surface, namely steel, with an initiation voltage as low as -2 V. Moreover, this approach enables high tunability of both the chemical state and morphology of the patterned iron oxide structures. Owing to the high chemical compatibility of ILs, which derives from the possibility of synthesizing ILs able to adsorb on a wide variety of solid surfaces, IL-o-SPL can be extended to other material surfaces and provide the opportunity to accurately tailor the chemistry, morphology, and electronic properties within nanoscale domains, thus opening new pathways to the development of novel micro- and nano-architectures for advanced integrated devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrochemical Recovery of Iron from Spent Pickle Liquor by Chloride-Based Molten Salt Electrolysis

Spent pickle liquor (SPL) is a waste stream generated in the steel industry that presents both a disposal challenge and a potential resource for metal recovery. This study investigates the electrochemical extraction of high-purity iron metal from SPL using chloride-based molten salt electrolysis (CMSE). Electrochemical characterization of diluted SPL confirmed Fe 2+ as the dominant species. Thermal dehydration of SPL under inert atmosphere yielded FeCl 2 -rich solids, which were directly employed as feedstock for electrolysis in LiCl–KCl eutectic melts at 500 °C. Cyclic voltammetry of FeCl 2 in this melt revealed well-defined Fe 2+ /Fe 0 redox behavior within the electrochemical stability window of the supporting electrolyte. High coulombic efficiency (>85%) electrodeposition was achieved demonstrating that iron metal can be produced from dehydrated SPL by CMSE. The electrodeposited iron exhibited >98 wt% purity, which was further enhanced to 99.9 wt% via arc melting. The resulting iron powder was ferromagnetic, and its size distribution was found to be suitable for powder metallurgy applications. This work demonstrates a scalable, energy-efficient pathway for valorizing SPL into high-purity iron metal, advancing circular economy strategies in the steel industry.

Materials science↗
DOE OSTI2023

Searching for quasar candidates with periodic variations from the Zwicky Transient Facility: results and implications

ABSTRACT We conduct a systematic search for quasars with periodic variations from the archival photometric data of the Zwicky Transient Facility by cross-matching with the quasar catalogues of the Sloan Digital Sky Survey and Véron-Cetty and Véron. We first select out 184 primitive periodic candidates using the generalized Lomb–Scargle periodogram and autocorrelation function and then estimate their statistical significance of periodicity based on two red-noise models, i.e. damped random walk (DRW) and single power-law (SPL) models. As such, we finally identify 106 (DRW) and 86 (SPL) candidates with the most significant periodic variations out of 143 700 quasars. We further compare DRW and SPL models using Bayes factors, which indicate a relative preference of the SPL model for our primitive sample. We thus adopt the candidates identified with SPL as the final sample and summarize its basic properties. We extend the light curves of the selected candidates by supplying other archival survey data to verify their periodicity. However, only three candidates (with 6–8 cycles of periods) meet the selection criteria. This result clearly implies that, instead of being strictly periodic, the variability must be quasi-periodic or caused by stochastic red-noise. This exerts a challenge to the existing search approaches and calls for developing new effective methods.

Chen, Yong-Jie (ORCID:0000000342807673)↗
DOE OSTI2025

Probing the PeV region in the astrophysical neutrino spectrum using 𝜈 𝜇 from the Southern sky

IceCube has observed a diffuse astrophysical neutrino flux over the energy region from a few TeV to a few PeV. At PeV energies, the spectral shape is not yet well measured due to the low statistics of the data. This analysis probes the gap between 1 and 10 PeV by using high-energy downgoing muon neutrinos. Here, to reject the large atmospheric muon background, two complementary techniques are combined. The first technique selects events with high stochasticity to reject atmospheric muon bundles whose stochastic energy losses are smoothed due to high muon multiplicity. The second technique vetoes atmospheric muons with the IceTop surface array. Using 9 yrs of data, we found two neutrino candidate events in the signal region, consistent with expectation from background, each with relatively high signal probabilities. A joint maximum likelihood estimation is performed using this sample and an independent 9.5-yr sample of tracks to measure the neutrino spectrum. A likelihood ratio test is done to compare the single power-law (SPL) vs SPL+cutoff hypothesis; the SPL+cutoff model is not significantly better than the SPL. High-energy astrophysical objects from four source catalogs are also checked around the direction of the two events. No significant coincidence was found.

Abbasi, R. [Loyola University Chicago] (ORCID:0000↗
DOE OSTI2022

Multi-Modal Characterization of Nuclear Fuels and Materials at the Idaho National Laboratory Materials & Fuels Complex

The Idaho National Laboratory (INL) leads cutting-edge research pertaining to the advancement of nuclear reactor technologies, including nuclear fuels and materials. The INL Irradiated Materials Characterization Laboratory (IMCL), Electron Microscopy Laboratory (EML), and future Sample Preparation Laboratory (SPL) are available to the nuclear research community to assess the behavior of nuclear fuels and materials, efficiently and comprehensively characterizing from the engineering to atomistic scale. The IMCL is a unique, 12,000-square-foot facility located at the INL Materials and Fuels Complex designed for analysis of irradiated materials. The facility operates advanced characterization instruments that are sensitive to vibration, temperature, and electromagnetic interference in modular radiological shielding and confinement systems, granting researchers the ability to assess the microstructural, chemical, mechanical and thermophysical properties of nuclear materials, especially irradiated fuels. The EML is dedicated to advanced characterization of materials with optical and electron microscopy tools, including scanning electron microscopy/focused-ion beam (SEM/FIB) and transmission electron microscopy (TEM). Upon construction, the SPL will be a 3 story, 49,000 sq. ft facility, that is the most modern reactor structural materials testing and analysis facility in the world, designed to investigate reactor structural materials in support of life-extension programs and development of advanced reactor concepts, including mechanical testing and advanced characterization capabilities. This presentation will showcase some of the main capabilities available at both IMCL, EML, and SPL, specifically illustrating how these characterization techniques are incorporated into multi-modal characterization work scopes to elucidate the degradation of nuclear structural materials and irradiated fuels.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Recovery of Carbon and Valuable Components from Spent Pot Lining by Leaching with Acidic Aluminum Anodizing Wastewaters

A three-step process was employed to separate cryolite from used carbon cathodes, known as spent pot lining (SPL), and obtain valuable carbon. The process comprised leaching of NaF from the imbedded electrolyte with water, followed by leaching of Na{sub 3}AlF{sub 6}, CaF{sub 2}, and NaAl{sub 11}O{sub 17} with acidic anodizing wastewater, and then precipitating the electrolyte components from the mixed filtrate from the previous two steps. The influences of stirring rate, liquid–solid ratio, temperature, and time on the extent of leaching of cryolite and recovery of carbon were studied. Additionally, the effects of pH value, F/Al ratio, temperature, and time on the recovery of valuable components in the mixed filtrate were evaluated. The results showed that most NaF in the SPL was dissolved by water leaching. The residual electrolyte in SPL was mainly cryolite and contained approximately 0.95 pct NaF. The purity of the carbon obtained reached 95.5 pct under optimal experimental conditions (leaching temperature: 80 °C; stirring rate: 300 rpm; liquid–solid ratio: 8 mL/g; leaching time: 180 minutes). The recovery of cryolite and the purity of the sodium sulfate crystal from the mixed filtrate were 98.4 and 92.0 pct, respectively, under suitable conditions (pH 9; 75 °C; 4 hour; F/Al ratio of 6:1).

36 MATERIALS SCIENCE↗
DOE OSTI2018

Estimation of Dose from Potential Radionuclide Emissions from the Sample Preparation Laboratory at the Materials and Fuels Complex

The Sample Preparation Laboratory (SPL) at the Materials and Fuels Complex will perform sample preparation, examination, and mechanical-property testing of highly irradiated materials. The purpose of this report is to document calculation of the estimated dose at public receptor locations from potential radionuclide releases to the atmosphere from SPL. Atmospheric dispersion and dose calculations were performed with the computer model CAP88-PC Version 4 in accordance with the requirements of Code of Federal Regulations (CFR), Title 40, “Protection of the Environment,” Part 61, “National Emission Standards for Hazardous Air Pollutants (NESHAPs),” Subpart H, “National Emission Standards for Emissions of Radionuclides Other than Radon from Department of Energy Facilities” (40 CFR 61, Subpart H 2010). Emission potentials were calculated based on the methodology in 40 CFR Part 61, Appendix D and additional guidance/approval by EPA Region 10 [see letter from Donald Dossett (EPA Region 10) to Tim Safford (DOE-ID), Oct 19, 2017 (CCN 241475)] for solid materials that undergo heating. Estimates of total effective dose are based on low-level chronic exposure. The potential maximum dose to a member of the public was calculated to be 0.02 mrem/year based on an estimated 16 g of the 30 kg source term (0.053%) being exposed to very high temperatures associated with electrical-discharge machining (EDM) and the remaining material heated to 100°C. Calculations show the maximum dose could be as high as 0.05 mrem/year if the remaining material were heated to 1400°C (i.e., the melting point of stainless steel). The potential maximum dose to a public receptor from emissions at SPL is not expected to exceed 0.1 mrem/year (1% of the standard) so long as the material impacted by EDM does not exceed 56 g (3.5 times the expected mass of 16 g and less than 0.2% of the total source term), and the remaining material is not heated to temperatures greater than 1400°C. It should be noted that credit for HEPA filtration does not impact the dose results because the dose is dominated by radionuclides that have exceeded their boiling point; thus, no credit for HEPA filtration may be applied to the emission factor.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2019

Mixed-phase orographic cloud microphysics during StormVEx and IFRACS

Wintertime mixed-phase orographic cloud (MPC) measurements were conducted at the Storm Peak Laboratory (SPL) during the Storm Peak Lab Cloud Property Validation Experiment (StormVEx) and Isotopic Fractionation in Snow (IFRACS) programs in 2011 and 2014, respectively. The data include 92 h of simultaneous measurements of supercooled liquid cloud droplet and ice particle size distributions (PSDs). Average cloud droplet number concentration (CDNC), droplet size (NMD), and liquid water content (LWC) were similar in both years, while ice particle concentration (Ni) and ice water content (IWC) were higher during IFRACS. The consistency of the liquid cloud suggests that SPL is essentially a cloud chamber that produces a consistent cloud under moist, westerly flow during the winter. A variable cloud condensation nuclei (CCN)-related inverse relationship between CDNC and NMD strengthened when the data were stratified by LWC. Some of this variation is due to changes in cloud base height below SPL. While there was a weak inverse correlation between LWC and IWC in the data as a whole, a stronger relationship was demonstrated for a case study on 9 February 2014 during IFRACS. A minimum LWC of 0.05 g m–3 showed that the cloud was not completely glaciated on this day. Erosion of the droplet distribution at high IWC was attributed to the Wegener–Bergeron–Findeisen process as the high IWC was accompanied by a 10-fold increase in Ni. A relationship between large cloud droplet concentration (25–35 µm) and small ice particles (75–200 µm) under cold (<–8 °C) but not warm (>–8 °C) conditions during IFRACS suggests primary ice particle production by contact or immersion freezing. The effect of blowing snow was evaluated from the relationship between wind speed and Ni and by comparing the relative (percent) ice particle PSDs at high and low wind speeds. These were similar, contrary to expectation for blowing snow. However, the correlation between wind speed and ice crystal concentration may support this explanation for high crystal concentrations at the surface. Secondary processes could have contributed to high crystal concentrations but there was no direct evidence to support this. Further experimental work is needed to resolve these issues.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

An empirical investigation of organic software product lines

Abstract Software product line engineering is a best practice for managing reuse in families of software systems that is increasingly being applied to novel and emerging domains. In this work we investigate the use of software product line engineering in one of these new domains, synthetic biology. In synthetic biology living organisms are programmed to perform new functions or improve existing functions. These programs are designed and constructed using small building blocks made out of DNA. We conjecture that there are families of products that consist of common and variable DNA parts, and we can leverage product line engineering to help synthetic biologists build, evolve, and reuse DNA parts. In this paper we perform an investigation of domain engineering that leverages an open-source repository of more than 45,000 reusable DNA parts. We show the feasibility of these new types of product line models by identifying features and related artifacts in up to 93.5% of products, and that there is indeed both commonality and variability. We then construct feature models for four commonly engineered functions leading to product lines ranging from 10 to 7.5 × 10 20 products. In a case study we demonstrate how we can use the feature models to help guide new experimentation in aspects of application engineering. Finally, in an empirical study we demonstrate the effectiveness and efficiency of automated reverse engineering on both complete and incomplete sets of products. In the process of these studies, we highlight key challenges and uncovered limitations of existing SPL techniques and tools which provide a roadmap for making SPL engineering applicable to new and emerging domains.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Computer-aided classification of suspicious pigmented lesions using wide-field images

Early identification of melanoma is conducted through whole-body visual examinations to detect suspicious pigmented lesions, a situation that fluctuates in accuracy depending on the experience and time of the examiner. Computer-aided diagnosis tools for skin lesions are typically trained using pre-selected single-lesion images, taken under controlled conditions, which limits their use in wide-field scenes. Here, we propose a computer-aided classifier system with such input conditions to aid in the rapid identification of suspicious pigmented lesions at the primary care level. 133 patients with a multitude of skin lesions were recruited for this study. All lesions were examined by a board-certified dermatologist and classified into “suspicious” and “non-suspicious”. A new clinical database was acquired and created by taking Wide-Field images of all major body parts with a consumer-grade camera under natural illumination condition and with a consistent source of image variability. 3–8 images were acquired per patient on different sites of the body, and a total of 1759 pigmented lesions were extracted. A machine learning classifier was optimized and build into a computer aided classification system to binary classify each lesion using a suspiciousness score. In a testing set, our computer-aided classification system achieved a sensitivity of 100% for suspicious pigmented lesions that were later confirmed by dermoscopy examination (“SPL_A”) and 83.2% for suspicious pigmented lesions that were not confirmed after examination (“SPL_B”). Sensitivity for non-suspicious lesions was 72.1%, and accuracy was 75.9%. With these results we defined a suspiciousness score that is aligned with common macro-screening (naked eye) practices. This work demonstrates that wide-field photography combined with computer-aided classification systems can distinguish suspicious from non-suspicious pigmented lesions, and might be effective to assess the severity of a suspicious pigmented lesions. We believe this approach could be useful to support skin screenings at a population-level.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Spatial defects nanoengineering for bipolar conductivity in MoS 2

Understanding the atomistic origin of defects in two-dimensional transition metal dichalcogenides, their impact on the electronic properties, and how to control them is critical for future electronics and optoelectronics. Here, we demonstrate the integration of thermochemical scanning probe lithography (tc-SPL) with a flow-through reactive gas cell to achieve nanoscale control of defects in monolayer MoS 2 . The tc-SPL produced defects can present either p- or n-type doping on demand, depending on the used gasses, allowing the realization of field effect transistors, and p-n junctions with precise sub-μm spatial control, and a rectification ratio of over 10 4 . Doping and defects formation are elucidated by means of X-Ray photoelectron spectroscopy, scanning transmission electron microscopy, and density functional theory. We find that p-type doping in HCl/H 2 O atmosphere is related to the rearrangement of sulfur atoms, and the formation of protruding covalent S-S bonds on the surface. Alternatively, local heating MoS 2 in N 2 produces n-character.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Characterization of the astrophysical diffuse neutrino flux using starting track events in IceCube

In this article, a measurement of the diffuse astrophysical neutrino spectrum is presented using IceCube data collected from 2011-2022 (10.3 years). We developed novel detection techniques to search for events with a contained vertex and exiting track induced by muon neutrinos undergoing a charged-current interaction. Searching for these starting track events allows us to not only more effectively reject atmospheric muons but also atmospheric neutrino backgrounds in the southern sky, opening a new window to the sub-100 TeV astrophysical neutrino sky. The event selection is constructed using a dynamic starting track veto and machine learning algorithms. We use this data to measure the astrophysical diffuse flux as a single power law flux (SPL) with a best-fit spectral index of γ=2.58$_{-0.09}^{+0.10}$ and per-flavor normalization of $\phi$$_{per-flavor}^{Astro}$=1.68$_{-0.22}^{+0.19}$×10 -18 ×GeV -1 cm -2 s -1 sr -1 (at 100 TeV). The sensitive energy range for this dataset is 3-550 TeV under the SPL assumption. This data was also used to measure the flux under a broken power law, however we did not find any evidence of a low energy cutoff.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Final Technical Report

This report highlights of the last 3 years research. Discovery that one-layer (1L) epitaxial graphene plus one carbon interfacial buffer layer (BfL) , both grown by sublimation on SiC(0001), present a stiffness upon indentation similar/larger than bulk diamond and resist to perforation by a diamond indenter. Discovery of an sp 2 - sp 3 phase transformation upon indentation at room temperature of 1L+BfL epitaxial graphene on SiC, the new ultra-hard, ultra-stiff and insulating sp 3 phase was named Diamene . Demonstration of Å-Indentation (ÅI) measurements to measure the stiffness (up to 1 TPa) of ultra-thin (down to 1 atomic layer) films on substrates. First measurement by ÅI of the stiffness of Q-Carbon nano-filaments. Discovery of an oscillatory behavior in friction forces and work function values for even and odd number of layers in polycrystalline MoS 2 films, associated to the oscillatory piezoelectricity of the grains . Demonstration that monolayer MoS 2 can efficiently screen the vdW interaction of the underlying substrate with external systems. Identification of SiC buried terraces and graphene number of layers in a continuous film of epitaxial graphene on SiC by machine learning algorithms. New understanding of defects formation in monolayer MoS 2 . Demonstration of a new method based on thermal scanning probe lithography (t-SPL) for patterning electrodes on 2D materials overcoming EBL limitations . Demonstration of t-SPL for patterning nanoscale magnetic quantum waveguides . New understanding of how charged nanoparticles electrostatically assemble in 1D .

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Aerosol-Cloud-Precipitation Interactions during StormVEx

Aerosol physical properties and wintertime mixed-phase orographic cloud measurements were conducted at the Storm Peak Laboratory (SPL) during the Storm Peak Lab Cloud Property Validation Experiment (StormVEx) in 2011 with the deployment of the DOE ARM mobile facilities. Results presented in accepted and submitted publications demonstrate the following. First, a relationship between large cloud droplet concentration (25–35 μm) and small ice particles (75– 200 μm) under cold (<-8 C) but not warm (>-8 C) conditions suggests primary ice particle production by contact or immersion freezing. Second, during the Springtime, aerosols from New Particle Formation at SPL are more hygroscopic than the background aerosol and thus increased the number of cloud condensation nuclei (CCN) at the site.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

BENEFIT with Northeastern University: HVAC Hardware-in-the-Loop Experimental Testing of a Heat Pump and Air Conditioner

This dataset includes HVAC Hardware-in-the-Loop (HIL) experimental results for a single stage, SEER 16, HSPF 9.5, 3-ton single-speed air source heat pump with 15 kW of backup auxiliary heating tested in both cooling and heating mode, and a two stage, SEER 21, 2-ton central air conditioner tested in cooling mode for a set of outdoor temperatures and indoor setpoint temperatures. In addition to these tests, experimental tests focused on the operation of auxiliary heating for the heat pump for winter condition were also conducted. The laboratory experiments for transient testing of the heat pump and air conditioner were conducted using the two HIL systems in the Systems Performance Laboratory (SPL) at NREL’s Energy Systems Integration Facility (ESIF). Further information on laboratory design and capabilities of the SPL along with the architecture of HVAC HIL system can be found in: Sparn, B. F. 2018. Laboratory Resources and Techniques to Evaluate Smart Home Technology (No. NREL/CP-5500-71696). National Renewable Energy Laboratory (NREL), Golden, CO (United States). https://www.nrel.gov/docs/fy18osti/71696.pdf and the experimental setup and validation of HVAC HIL platform can be found in: Ramaraj, S. and Sparn, B. 2022. Validation of HVAC Hardware-In-the-Loop Simulation for Advanced Control Strategies in Smart Homes (No. NREL/CP-5500-82562). National Renewable Energy Lab (NREL), Golden, CO (United States). https://www.nrel.gov/docs/fy22osti/82562.pdf. These experimental results can be used to validate how we currently model the cycling behavior of heat pumps and air conditioners. Additionally, many demand response programs implement heat pump and air conditioner control by changing the thermostat set point – these data may also be used to verify our models for heat pump and air conditioner demand response control are implemented correctly. The Test_Matrix file describes all the indoor and outdoor test conditions for heat pump and air conditioner and the file names of data sets include information about the test conditions. A wide range of outdoor air temperatures were chosen to accommodate summer and winter conditions. In addition to operating the HVAC equipment with different outdoor temperatures, we also operate the system with different indoor temperature set points to represent different grid signals or different operating conditions. For cooling conditions, the baseline set point is 72°F. To represent Load Up signals, the setpoint is changed to 68°F. The Load Shed set point is 76°F. For heating conditions, the baseline set point was assumed to be 68°F. The Load add set point is 72°F and the Load shed set point is 64°F. The starting indoor temperature for cooling conditions was set ~2°F above the indoor setpoint temperature so that the equipment turned on quickly. Similarly, the initial indoor temperature was set ~2°F lower than setpoint for heating mode tests to ensure that heating began quickly. The return air temperature was assumed to be equal to the indoor setpoint temperature in all cases. The experimental data are sampled at 1-second intervals. The data from ecobee thermostat at 5-minute interval are resampled and added to the corresponding file. The content of each data set is as follows: • T_Return (C): Measured return air temperature [C] • T_Return_SP (C): Return air temperature setpoint from E+ model, sent to HIL [C] • T_Supply (C): Measured supply air temperature at evaporator outlet [C] • T_Outdoor (C): Measured outdoor air temperature [C] • T_Outdoor_SP (C): Outdoor air temperature setpoint from weather file, sent to HIL [C] • T_Indoor (C): Measured indoor air temperature [C] • T_Indoor_SP (C): Indoor air temperature setpoint from E+ model, sent to HIL [C] • Outdoor Unit Power (W): Measured power of the outdoor unit [W] • Indoor Unit Power (W): Measured power of the indoor unit [W] • Evaporator Airflow Rate (CFM): Measured evaporator or indoor unit airflow rate sent to E+ model [CFM] • Cooling/Heating Capacity (kW): Calculated cooling/heating capacity sent to E+ model [kW] • T_SP_Thermostat (C): Thermostat cooling/heating setpoint temperature [C] • T_Indoor_Thermostat (C): Thermostat indoor air temperature [C]

24 POWER TRANSMISSION AND DISTRIBUTION↗