SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Static tests of 65 inch diameter subscale rocket engines to evaluate nozzle fabrication methods, nozzle materials, liner material, case insulation, and propellant
We present an analysis of the X-ray spectral properties observed from black hole , candidate (BHC) binary SS 433. We have analyzed Rossi X-ray Time Explorer (RXTE) data from this source, coordinated with Green Bank Interferometer/RATAN-600. We show that SS 433 undergoes a X-ray spectral transition from the low hard state (LHS) to the intermediate state (IS). We show that the X-ray broad-band energy spectra during all spectral states are well fit by a sum of so called "Bulk Motion Comptonization (BMC) component" and by two (broad and narrow) Gaussians for the continuum and line emissions respectively. In addition to these spectral model components we also find a strong feature that we identify as a" blackbody-like (BB)" component which color temperature is in the range of 4-5 keV in 24 IS spectra during the radio outburst decay in SS 433. Our observational results on the "high temperature BB" bump leads us to suggest the presence of gravitationally redshifted annihilation line emission in this source. In fact this spectral feature has been recently reproduced in Monte Carlo simulations by Laurent and Titarchuk. We have also established the photon index saturation at about 2.3 in index vs mass accretion correlation. This index-mass accretion correlation allows us to evaluate the low limit of black hole (BH) mass of compact object in SS 433, M(sub bh) approximately > 2 solar masses, using the scaling method using BHC GX 339-4 as a reference source. Our estimate of the BH mass in SS 433 is consistent with recent BH mass measurement using the radial-velocity measurements of the binary system by Hillwig & Gies who find that M(sub x)( = (4.3 +/- 0.8) solar masses. This is the smallest BH mass found up to now among all BH sources. Moreover, the index saturation effect versus mass accretion rate revealed in SS 433, like in a number of other BH candidates, is the strong observational evidence for the presence of a BH in SS 433.
The effects of interfacial contact between 316 stainless steel (316 SS) waste canister and spent fuel cladding material (Zircaloy-4) in case of water intrusion into a deep geological repository are investigated. Hydrothermal corrosion experiments of 316 SS and Zircaloy-4 in direct contact were performed at elevated temperatures in MilliQ water and simulated Mont Terri groundwater. Hematite, magnetite, chromite, and baddeleyite form as secondary phases. pH of the Mont Terri solution increases with corrosion duration and magnetite forms preferentially instead of hematite. Thermodynamic modeling shows that iron oxidation in 316 SS controls the pH and redox potential of the aqueous environment and is in good agreement with experimental Mont Terri results, showing that experimental Mont Terri results trend to equilibrium. All oxides except hematite are predicted to exist at thermodynamic equilibrium based on calculations, implying that experimentally formed hematite will be reduced or transformed to magnetite at equilibrium. The thermodynamically predicted chromite was observed to form only at the interface where 316 SS was in contact with Zircaloy-4 at 250°C, showing that contact with Zircaloy-4 seems to accelerate the 316 SS corrosion to thermodynamic equilibrium. Finally, Mont Terri groundwater readily trends towards thermodynamic equilibrium, leading to a pH and redox buffered system that is dominated by iron in solution coming from the accelerated corrosion of 316 SS caused by Zircaloy-4 contact.
This paper provides a comprehensive performance comparison between a current robust military waveform; namely, MIL-STD-188-110D, Waveform 0, and a filter bank multicarrier spread-spectrum (FBMC-SS) waveform proposed for communications through ionospheric/skywave HF channels. Waveform 0 is effectively a direct sequence spread spectrum waveform that uses Walsh multi-codes to enhance the information transmission rate. It may thus be referred to as Walsh-DSSS. FBMC-SS, on the other hand, makes use of filter banks to provide excellent performance when the received signal is subject to partial band interference. Successful application of FBMC-SS for communications across skywave HF channels has been previously demonstrated, both theoretically and through experimental work. However, very little has been done to contrast FBMC-SS against Walsh-DSSS. The goal of this paper is to first add new features to FBMC-SS to bring it on par with Walsh-DSSS. These features include: (i), introduction of multi-codes that achieve a comparable (or better) data rate to Walsh-DSSS; and (ii), addition of a scrambling step applied to the multi-codes to make the receiver detection robust against widely spread multipaths. With this established, in the second part of the paper, we examine the performance of the developed FBMC-SS against Walsh-DSSS when both are applied for communications across skywave HF channels. The two waveforms are compared both through a theoretical study and through experimental works across several skywave channels ranging from hundreds to thousands of kilometers.
To harness the potential of laser powder bed fusion (LPBF) 316H stainless steel (SS) for use in advanced nuclear reactors, extensive research efforts are needed to develop optimal laser processing parameters and appropriate heat treatments, taking into account various manufacturing platforms and locations. Furthermore, it is crucial to assess the material properties in environments relevant to reactor operating conditions. In collaboration with Oak Ridge National Laboratory (ORNL) and Los Alamos National Laboratory (LANL), Argonne National Laboratory (ANL) is dedicated to gaining insights into how the manufacturing process and post-build treatments impact the performance of LPBF 316H SS. This report provides an overview of ANL's research findings for FY23, focusing on LPBF 316H SS produced using a Renishaw AM400 laser system. Specifically, our research has concentrated on three key areas: 1) Optimum laser processing parameters: Leveraging the high-throughput printing technology, we systematically varied the laser power, exposure time and point distance within the same build. By measuring the as-printed porosity, we identified an optimum printing parameter window that produced materials with near-complete density; 2) Post-built treatment development: Materials printed with the optimum laser parameters underwent treatments including stress relief, solution annealing, and hot isostatic pressing. Subsequently, we fabricated tension, creep, and fatigue specimens from materials subjected to these different conditions. Over the next year, a series of scoping tests will be conducted to facilitate the selection of the most suitable post-build treatment condition; 3) Thermal aging effects on microstructure and properties: thermal aging at 550°C, 650°C and 750°C was conducted on LPBF 316H SS specimens up to 2500 h. Microstructural characterization was performed with electron microscopy, and the evolution of the dislocation cell structures and secondary phases was studied. Microhardness tests and tension tests were conducted to quantify changes in mechanical properties. The results revealed that the aged LPBF 316H SS exhibited a high density of Cr-rich and Mo-rich fine precipitates within grains due to the presence of a high density of dislocations and the globally distributed dislocation cell structures, which served as heterogeneous nucleation sites for secondary phases. Along grain boundaries, a Mo-Cr-rich phase, observed in 750°C-aged conditions, displayed significant thermal coarsening. Throughout the aging process, various mechanisms, including stress relaxation, dislocation cell structure recovery, solution hardening, and precipitation hardening, competed to influence materials strength. These results contribute towards establishing the technical basis for qualifying LPBF 316H SS for advanced nuclear reactor applications.
The detection of large-scale diffuse X-ray jets from the variable-emission-line object SS 433 is reported. Observations were made with the high resolution imager and imaging proportional counter on board the Einstein X-ray Observatory. The two diffuse X-ray features discovered are found to be aligned with both the central source of SS 433 and with the bulges of the shell of the huge supernova remnant W 50 associated with SS 433, thus confirming the detection of jets related to SS 433 and the link between SS 433 and W 50, establishing a minimum age of 1000 years for the jet phenomenon and offering an explanation of the size of W 50. Processes by which two oppositely directed beams of material from the SS 433 source region may emit the diffuse X-rays are then considered, including shock heating by interactions with the ambient medium and synchrotron radiation. Similarities between the morphologies of the diffuse X-ray emission and those of radio galaxies are also noted.
Einstein Observatory imaging detector observations of SS 433 and its surrounding region are used to map an approximately 2 x 1-deg region containing W50 centered on SS 433, which exhibits two bright, diffuse lobes of X-ray emission symmetrically displaced east and west of SS 433 and aligned along the long axis of W50. The bulk of the emission from each lobe is confined to a region subtending an angle of about 30 deg at the central object. X-ray spectra indicate that the diffuse emission is considerably softer than SS 433 itself. The kinematic beam model for SS 433 is taken as the basis for a discussion of the properties and origins of the lobes and of their relationship to W50.
SS Cygni and HL Canis majoris were observed by IUE for three consecutive nights in November of 1992. During the first two nights, simultaneous photometric ground-based observations of SS Cyg were made at the Ball State University Observatory. Observations of SS Cyg and HL CMa were also obtained simultaneously with the 90-inch telescope at the Steward Observatory on the last two nights of the IUE run. These spectroscopic observations covered the wavelength range from 4100 to 5000 A, while the spectra taken with the short wavelength camera on IUE resulted in wavelength coverage from 1150 A to 1980 A. SS Cyg is a U Geminorum-type dwarf nova with an orbital period of 6.6 hr. Good simultaneous UV and optical orbital coverage was obtained for this system. HL CMa is a Z Camelopardalis-type dwarf nova with a mean outburst interval of 15 days. The American Association of Variable Star Observers (AAVSO) reports that this system was in outburst 4 days after the observing run. Therefore, HL CMa may have been in a preoutburst state during these observations. Optical spectra of HL CMa indicate a warm front passed through the outer disk four days before outburst, but no changes were seen in the UV spectra. Signs of a preoutburst state were observed to develop in SS Cyg, but no outburst occurred for another 30 days.
We present a broadband X-ray study of W50 (the “Manatee” nebula), the complex region powered by the microquasar SS 433, that provides a test bed for several important astrophysical processes. The W50 nebula, a Galactic PeVatron candidate, is classified as a supernova remnant but has an unusual double-lobed morphology likely associated with the jets from SS 433. Using NuSTAR, XMM-Newton, and Chandra observations of the inner eastern lobe of W50, we have detected hard nonthermal X-ray emission up to ~30 keV, originating from a few-arcminute-sized knotty region (“Head”) located ≲18' (29 pc for a distance of 5.5 kpc) east of SS 433, and constrained its photon index to 1.58 ± 0.05 (0.5–30 keV band). The index gradually steepens eastward out to the radio “ear” where thermal soft X-ray emission with a temperature kT ~ 0.2 keV dominates. The hard X-ray knots mark the location of acceleration sites within the jet and require an equipartition magnetic field of the order of ≳12 μG. The unusually hard spectral index from the “Head” region challenges classical particle acceleration processes and points to particle injection and reacceleration in the subrelativistic SS 433 jet, as seen in blazars and pulsar wind nebulae.
Microquasars such as SS 433 are considered potential contributors to cosmic rays up to the knee of the cosmic-ray energy spectrum (∼4 PeV), where a transition in the dominant acceleration processes is expected. The SS 433 system, located within the W50 supernova remnant, is a Galactic microquasar with relativistic jets interacting with the surrounding medium over parsec scales, providing an example for studying jet-driven particle acceleration. A deep morphological and spectral study of SS 433 is performed using more than 150 hr of observations with VERITAS, sensitive to γ-ray energies >100 GeV. With an angular resolution better than 0$^°_.$1, extended TeV γ-ray emission is resolved from both the eastern and western jet lobes, located tens of parsecs from the central binary. The emission appears elongated along the jet axis and coincides with regions where the jets interact with the surrounding supernova remnant. No TeV emission is detected from the central binary, nor is significant emission observed between the central binary and the jet lobes. Phase-resolved analyses show no evidence for variability in the orbital or precessional phase, supporting a steady emission scenario. The observed morphology and spectra are consistent with scenarios where particles are accelerated in the lobes of the jets, possibly through shocks or alternative processes such as magnetic reconnection. The extended TeV emission from the jet lobes of SS 433 favors a leptonic origin in the VERITAS energy range, suggesting that any hadronic acceleration is subdominant. The results offer valuable constraints on how microquasar jets may contribute to the Galactic cosmic-ray population toward the knee.
Hard X-ray emission from a 15 min by 1.5 deg area containing SS Cygni had previously been reported and identified with SS Cygni. This paper reports a 0.4 sq arc min measurement of the position of the X-ray source with the HEAO 1 modulation collimator experiment which leads to an unequivocal identification of SS Cygni as an X-ray emitter in the 2-10 keV energy range. The historical light curve in hard X-rays was also investigated by analyzing relevant Uhuru data, and two instances of possible source detection in the 2-6 keV band were noted. From Ariel 5 observations it is calculated that the X-ray luminosity of SS Cygni in the 2-10 keV energy range is of the order of 10 to the 33rd erg/sec in the optical low state and probably at least an order of magnitude less in the high state. By contrast, the soft X-ray luminosity increases by an order of magnitude between the optical low and high states. A coronal model or accretion onto the white dwarf can account for the inverse correlation of the soft and hard X-rays.
A satellite communication system based on the use of a multiple, contiguous beam satellite antenna and frequency division multiple access (FDMA) is studied. Emphasis is on the evaluation of the feasibility of SS (satellite switching) FDMA technology, particularly the multiple, contiguous beam antenna, the onboard switch and channelization, and on methods to overcome the effects of severe Ka band fading caused by precipitation. This technology is evaluated and plans for technology development and evaluation are given. The application of SS-FDMA to domestic satellite communications is also evaluated. Due to the potentially low cost Earth stations, SS-FDMA is particularly attractive for thin route applications up to several hundred kilobits per second, and offers the potential for competing with terrestrial facilities at low data rates and over short routes. The onboard switch also provides added route flexibility for heavy route systems. The key beneficial SS-FDMA strategy is to simplify and thus reduce the cost of the direct access Earth station at the expense of increased satellite complexity.
Numerous observations of SS 433 were obtained with the Einstein X-ray Observatory over an 18 month period from 1979 March through 1980 October. MPC (as well as imaging) data from these observations show that the central object in SS 433 is variable in intensity and spectrum on a wide range of time scales. Flares appear to be correlated with the 13 day binary period, and may be more numerous at particular phases of the 164 day period. No evidence for variability on time scales less than 5 minutes is seen, suggesting the central X-ray source is extended and that the compact object itself is not directly visible. A model for SS 433 is suggested wherein the companion star has a spin misaligned with the orbital angular momentum. The volume of the Roche lobe reaches a minimum twice per binary orbit, giving rise to enhanced accretion which results in X-ray and radio flares. Additional constraints imposed by the X-ray and optical data suggest the compact object in SS 433 is an approximately 10-solar-mass black hole.
The observations prior to AO-4 covered a number of precession phases, leaving a gap at phase 0.8. In addition, ASCA and previous observations of SS 433 did not observe the spectrum above approx. 10 keV, and consequently the continuum underlying the spectral lines was poorly constrained. Therefore RXTE observations were scheduled for April 1997 to extend the observed spectrum to higher energies; these observations were planned to sample the X-ray lightcurve during the 13.08 day binary period, concentrating on the eclipse of the compact object which emits the jets. We proposed and were awarded ASCA observations simultaneous with the RXTE observations; the purpose of the ASCA observations was to provide greater spectral resolution at the low end of the spectrum observed by RXTE, and to complete the phase coverage of SS 433. As a result of scheduling difficulties early in the mission the RXTE observations were confined to a much shorter time range than originally planned, April 18-91 1997. Optical observations of SS 433 were performed at a number of observatories. The ASCA observations occurred from April 18 13:10 (UT) to April 21 13:20 (UT) for a total effective exposure of 120 ks. The continuum X-ray light curve shows that the ASCA observations started shortly before the ingress into the X-ray partial eclipse, and ended approximately at the time of the egress. Light curves were also obtained for the prominent Fe emission lines in the blue-shifted frame (approaching jet), red-shifted frame (receding jet), and the stationary frame (fluorescent line from the ambient matter). Through the eclipse mapping technique using the light curves, the parameters of the jet emission model were constrained, showing that the kinetic power in the jet exceeds 104? erg s-l. If the energy source is gravitational accretion, as is commonly believed, the derived l;inetic power implies extremely supercritical accretion even for a black; hole with 10M. These results will be described more fully in a major presentation of all the ASCA observations of SS 433.
Shear localization is characterized by the concentration of plastic deformation within narrow bands of material and constitutes the precursor to failure in materials subjected to high strain rates. These bands have been observed experimentally, but classical continuum material models have not been able to fully capture their development. The aim of this research is to investigate the role of microstructural differences in the dynamic shear response of wrought and additively manufactured (AM) 316L SS. Compact Forced Simple Shear specimens for Digital Image Correlation (CFSS-DIC) of wrought and additively manufactured 316L SS were tested on a Split Hopkinson Pressure Bar (SHPB) in conjunction with infrared thermometry measurements. Results indicate that the microstructures of wrought and AM 316L SS exhibit differences that affect the shear response of this materials. In conclusion, CFSS-DIC samples tested on the SHPB did not exhibit recrystallization inside the shear region, fact confirmed by thermometry measurements.
Simultaneous and quasi-simultaneous optical, UV and X-ray observations of the accreting degenerate dwarf stars AM Herculis, U Geminorum and SS Cygni are reported. The observations were obtained in March 1979, by instruments on board the Einstein Observatory and the IUE satellite, and optical properties were monitored on the ground. AM Her was found to be in a high state at the time of the observations, while SS Cyg and U Gem appeared to be in the optical low state. The presence of a strong UV excess is found in SS Cyg, U Gem and AM Her, which most likely originates from the boundary of the accretion disk in U Gem. The observed excess, with a blackbody component greater than 10 eV, is noted to be inconsistent with standard accretion disk and column models. It is suggested that nuclear burning at the surface of the white dwarf may be responsible for the excess UV flux in the three systems, with differences in spectral distributions resulting from different levels of magnetic field intensity and accretion rate.
Data accumulated from 1980 to 1983 with the Gamma Ray Spectrometer aboard NASA's Solar Maximum Mission (SMM) satellite were searched for evidence of red and blue Doppler-shifted 1.37 MeV Mg-24 nuclear lines from SS 433. The SMM data base covers 270 days when SS 433 was in the field of view and includes periods of radio flaring and quiescence. No evidence was found for Doppler-shifted line emission in any of the spectra. The range of 3-sigma upper limits for individual 9 day integration periods was 0.0008-0.0023 photons/sq cm per sec for the blue beam, encompassing the reported about 1.5 MeV line, and 0.0008-0.002 photons/sq cm per sec for the red beam, encompassing the reported about 1.2 MeV line; the average 3-sigma upper limit in each beam for shifted about 1.37 MeV lines is 0.0015 photons/sq cm per sec for single 9 day integrations. The 3-sigma upper limit on 1.37 MeV gamma-ray emission over 23 9-day integration intervals for the red beam and 28 intervals for the blue beam is 0.0002 photons/sq cm per sec. These new limits from SMM can be reconciled with the HEAO 3 results only if SS 433 emits gamma radiation at or above the SMM sensitivity limit on rare occasions due to variable physical conditions in the system.
We observed SS 433 for the third time with RXTE, this time simultaneously with a Nobeyama millimeter band monitoring campaign. These observations extended the RXTE coverage of SS 433's precession phases. and once again monitored the source during a binary eclipse. Our AO-2 campaign of a joint RXTE-VLBA-VLA-MERLIN observation was delayed to little more than a month before the AO-3 observations. We also had an AO-1 observation of SS 433. In each case we observed an eclipse of the compact ob'ect by the companion star, and had contemporaneous optical observations. We are analyzing all three sets of observations together. A publication is in preparation; Its completion will be supported by the remaining AO-2 funds. Here I will summarize the general results and point out the relevant features of the AO-3 observations. The spectrum is detected to approx. 50 keV, which is entirely within the PCA energy band. We find that the HEXTE data do not add significantly to the spectrum, and most of our fits are without HEXTE. We find that the continuum can be fit with a power law with an exponential cutoff; the photon index is usually approx. 1.4. A line at approx. 6.4 keV is definitely required, and the fits improve significant, if we add a second line, also with an energy in the iron K(alpha) complex, and an absorption edge. The edge usually has an energy of approx. 5.8 keV, which does not correspond to any known physical feature. and may be an instrumental artifact. This is under further investigation.