SEARCH · Search NASA

Results for “SSITKA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

14 records

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Significant Roles of Surface Hydrides in Enhancing the Performance of Cu/BaTiO 2.8 H 0.2 Catalyst for CO 2 Hydrogenation to Methanol

Abstract Tuning the anionic site of catalyst supports can impact reaction pathways by creating active sites on the support or influencing metal‐support interactions when using supported metal nanoparticles. This study focuses on CO 2 hydrogenation over supported Cu nanoparticles, revealing a 3‐fold increase in methanol yield when replacing oxygen anions with hydrides in the perovskite support (Cu/BaTiO 2.8 H 0.2 yields ~146 mg/h/gCu vs. Cu/BaTiO 3 yields ~50 mg/h/gCu). The contrast suggests that significant roles are played by the support hydrides in the reaction. Temperature programmed reaction and isotopic labelling studies indicate that BaTiO 2.8 H 0.2 surface hydride species follow a Mars van Krevelen mechanism in CO 2 hydrogenation, promoting methanol production. High‐pressure steady‐state isotopic transient kinetic analysis (SSITKA) studies suggest that Cu/BaTiO 2.8 H 0.2 possesses both a higher density and more active and selective sites for methanol production compared to Cu/BaTiO 3 . An operando high‐pressure diffuse reflectance infrared spectroscopy (DRIFTS)‐SSITKA study shows that formate species are the major surface intermediates over both catalysts, and the subsequent hydrogenation steps of formate are likely rate‐limiting. However, the catalytic reactivity of Cu/BaTiO 2.8 H 0.2 towards the formate species is much higher than Cu/BaTiO 3 , likely due to the altered electronic structure of interface Cu sites by the hydrides in the support as validated by density functional theory (DFT) calculations.

He, Yang↗

DOE OSTI2020

The interplay between surface facet and reconstruction on isopropanol conversion over SrTiO 3 nanocrystals

Strontium titanate (SrTiO 3 ) is an extensively investigated perovskite for various applications due to its optical, electrical and chemical properties. To gain an in-depth understanding of the active sites involved in heterogeneous catalysis over the broadly used SrTiO 3 (STO), we studied a model reaction, isopropanol conversion, on three differently shape-controlled nanocrystals: cube, truncated cube and dodecahedra. SEM, XRD and XPS confirmed the morphology, phase and composition of STO shapes. Low energy ion scattering (LEIS) revealed the occurrence of surface reconstruction over STO shapes during O 2 pretreatment at different temperatures. Based on the catalytic activities, scanning transmission electron microscopy images and density functional theory calculations, the step sites on STO derived from surface reconstruction were proposed to be the active sites for isopropanol conversion. This was further confirmed by steady state isotopic kinetic analysis (SSITKA) which demonstrated similar intrinsic turnover frequencies (TOFs) for the differently reconstructed STO shapes. It is concluded that the crystal facets impose an indirect effect on the catalysis of STO via controlling the degrees of surface reconstruction: the less stable STO (1 1 0) facet (dodecahedra) leads to more step sites after reconstruction and hence higher overall reaction rate than the more stable (1 0 0) facet (cube). This work highlights the important interplay between the crystal facet and surface reconstruction in controlling the nature and density of active sties and thus catalysis over complex oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

In Situ Strong Metal–Support Interaction (SMSI) Affects Catalytic Alcohol Conversion

Strong metal–support interactions (SMSIs) and catalyst deactivation have been heavily researched for decades by the catalysis community. The promotion of SMSIs in supported metal oxides is commonly associated with H 2 treatment at high temperature (>500 °C), and catalyst deactivation is commonly attributed to sintering, leaching of the active metal, and overoxidation of the metal, as well as strong adsorption of reaction intermediates. Alcohols can reduce metal oxides, and thus here we have hypothesized that catalytic conversion of alcohols can promote SMSIs in situ . In this work we show, via IR spectroscopy of CO adsorption and electron energy loss spectroscopy (EELS), that during 2-propanol conversion over Pd/TiO 2 coverage of Pd sites occurs due to SMSIs at low reaction temperatures (as low as ~ 190 °C). The emergence of SMSIs during the reaction ( in situ ) explains the apparent catalyst deactivation when the reaction temperature is varied. A steady-state isotopic transient kinetic analysis (SSITKA) shows that the intrinsic reactivity of the catalytic sites does not change with temperature when SMSI is promoted in situ ; rather, the number of available active sites changes (when a TiO x layer migrates over Pd NPs). SMSI generated during the reaction fully reverses upon exposure to O 2 at room temperature for ~15 h, which may have made their identification elusive up to now.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Reaction Pathways over ZnZrO 2 -Based Catalysts and Catalytic Sorbents

Reactive capture and conversion (RCC) is a process intensification approach that integrates CO 2 capture and hydrogenation within a single unit, removing the CO 2 purification and storage steps of traditional process flow schemes. This alters the catalytic step from a traditional steady-state (SS) flow process to a transient capture and conversion cycle, which could lead to product distributions distinct from those observed in conventional SS experiments. Such differences are investigated in the combined capture and hydrogenation of carbon dioxide to methanol over a ZnZrO 2 catalyst and a ZnZrO 2 + NaNO 3 /Mg 3 AlO x catalytic sorbent (CS) using fixed-bed kinetic measurements, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and steady-state isotopic transient kinetic analysis-DRIFTS (SSITKA-DRIFTS). Under SS conditions, ZnZrO 2 produced methanol through sequential hydrogenation of HCOO* and CH 3 O* intermediates. On the contrary, CO was attributed primarily to CO 2 dissociation at oxygen vacancies, as supported by isotopic shifts and measured reaction orders. For the CS, isotopic switching experiments suggested that monodentate carbonate species (CO 3 2− , abbreviated as m-CO 3 2− ) act as active intermediates that can be hydrogenated to HCOO* and subsequently to CH 3 O. Under RCC conditions, in situ DRIFTS and isotopic experiments reveal that m-CO 3 2− species formed during the CO 2 capture step follow two competing routes upon H 2 exposure: (i) direct hydrogenation to methane on the sorbent domain or (ii) migration of m-CO 3 2− to the ZnZrO 2 domain, where they are hydrogenated to methanol through the HCOO pathway. Overall, RCC enables carbonate hydrogenation routes not observed under SS cofeed conditions. Thus, the reaction pathways and rates during RCC can be different from operation under conventional SS conditions, and the product distribution is determined here by competition between carbonate hydrogenation on sorbent sites and migration to ZnZrO 2 for methanol synthesis.

CCUS↗

DOE OSTI2022

Crystallographic dependence of CO 2 hydrogenation pathways over HCP-Co and FCC-Co catalysts

We report efficient conversion of CO 2 is of great significance for sustainable supply of chemicals and fuels. While Co-based catalysts are known to be effective for CO hydrogenation in Fischer-Tropsch synthesis, they work very differently in CO 2 hydrogenation. This study reveals a crystallographic dependence of reaction pathways for CO 2 hydrogenation on Co catalyst showing a new type of structure sensitivity and structure-activity-selectivity relationship for CO 2 conversion to chemicals and fuels. The experimental work on CO 2 conversion including steady-state isotopic transient kinetic analysis (SSITKA) using 13 C-labeled CO 2 shows a preferential CH 4 formation over HCP-Co but dominant CO formation over FCC-Co. The density functional theory calculations indicate that CO 2 does dissociate directly into chemisorbed CO * and O * on both HCP-Co and FCC-Co, but the CO * intermediates on HCP-Co prefer to be hydrogenated to form CH 4 whereas the CO* on FCC-Co preferentially desorb to form CO. The significantly altered adsorption strength of CO * due to the presence of chemisorbed O * and CO 2 * species on the catalyst surface is responsible for the mechanistic disconnection in product selectivity between the CO 2 and CO hydrogenation over Co catalysts. This study also shows that the addition of K to Co diminishes the direct impact of Co crystal structure, but improves the selectivity to C 2 + hydrocarbons along with higher CO 2 conversion. This seems to result from another pathway originating from HCOO* intermediate from bonding interaction of surface Co atoms with carbon in CO 2 , leading to the formation of CH x * whose coupling subsequently give rises to C 2 + products. The present study sheds new light into the crystallographic structural sensitivity of CO 2 hydrogenation towards the rational design of more selective catalysts for CO 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Mechanism for Acetone and Crotonaldehyde Production during Steam Reforming of Ethanol over La 0.7 Sr 0.3 MnO 3–x Perovskite: Evidence for a Shared C4 Aldol Addition Intermediate

Here a mechanistic study was conducted on the catalytic conversion of ethanol over La 0.7 Sr 0.3 MnO 3–x perovskite catalysts in the presence and absence of water. The study sought insights into the path of C–C coupling toward acetone and crotonaldehyde and also into clarifying whether the lack of previous reports of C–C coupling over La 0.7 Sr 0.3 MnO 3–x (100) could be due to a “pressure gap”. Several types of experiments were performed at 400–800 K: flow experiments with a torr range reactant gas flown over La 0.7 Sr 0.3 MnO 3–x powders; ultra-high vacuum experiments with continuous gas exposures to a La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample; and torr range continuous gas exposures to a La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample. When ethanol and water were flown over La 0.7 Sr 0.3 MnO 3–x powders at 400–800 K, the products detected were ethene, acetaldehyde, acetone, crotonaldehyde, CO, CO 2 , and H 2 . Acetone was catalytically produced over both the La 0.7 Sr 0.3 MnO 3–x powder and the La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample at temperatures of 700–800 K when reaction conditions were on the order of 1 Torr of reactant gas and with an excess of water relative to ethanol (1 ethanol/9 water). Isotopic labeling with deuterium was used to gain insights into the C–C coupling reaction mechanism and paths in species with three and four carbons (C 3 and C 4 species). Additionally, steady-state isotopic transient kinetic analysis (SSITKA) experiments + simulations using carbon labeling of the ethanol feed were performed. Three mechanistic paths were considered for the C–C coupling step: the first two paths, A and B, involve coupling between two intermediates which are both in oxygen vacancies; and the third path, C, involves coupling between one intermediate in an oxygen vacancy and one intermediate outside of an oxygen vacancy. The results suggest that the dominant path to the C 3 product, acetone, depends on the conditions. The less active path (attributed to path A or B) occurs at 600–700 K and involves coupling between two irreversibly bound species. The more active path (attributed to path C) requires an excess of water, becomes dominant at 600–800 K, and involves coupling between one irreversibly bound species and one reversibly bound species. Based on these various observations from experiments and simulations, an elementary step is proposed for acetone formation involving a previously unreported C 4 transition state that is formed after aldol addition. Density functional theory calculations were performed based on this hypothesis, and it confirmed that this specific and previously unreported aldol addition path to acetone does exist and that this path consistent with the experimental data. In this path, C–C formation occurs to create a C 4 intermediate that is bound to an oxygen vacancy, then a hydrogen transfer with C–C bond breaking occurs that results in the production of the acetone molecule. The proposed mechanism is also consistent with the experimental observation that acetone formation has a greater than first-order dependence on the water vapor pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Recent Developments in Revealing the Impact of Complex Metal Oxide Reconstruction on Catalysis

Surface reconstruction of complex metal oxides refers to the alterations of the topmost catalyst surface, relative to the bulk structure, following exposure to pretreatment or reaction conditions during heterogeneous catalysis. (1) This structural and electronic transformation may involve (1) changes of the exposed crystallographic facets, (2) changes in chemical composition, such as the enrichment of specific elements, and, (3) morphological variations, including surface roughness and defects (Scheme 1). Beyond relaxation, surface reconstruction here also encompasses disruptions to the periodicity of the sublayers and changes to its stoichiometry. This change significantly influences the chemical properties of the catalyst surface, such as redox sites, (2) acid/base pairs, hydroxyl groups, (3) and surface defects. Surface reconstruction occurs due to the thermodynamic drive to lower the surface energy of the catalyst under the surrounding environment (e.g., temperature, chemical potential of species present). In addition to the treatment or reaction conditions, the extent of reconstruction also depends on the elements in the metal oxide structure. For instance, annealing ABO 3 perovskites (SrTiO 3 , BaTiO 3 , and BaZrO 3 ) at high temperatures (500 °C) in O 2 has a very different impact on the A/B ratio at the surface (ranging from 0.9 to 2.5), depending on the identity of A and B. (4) Metal oxide surface reconstruction under an electric field and exposure to acidic and alkaline media has recently gained increased attention in electrocatalysis, such as in the oxygen evolution reaction (OER); (5,6) however, in this Viewpoint we focus on the impact of surface reconstruction on thermal catalysis, a critical enduring research theme with ongoing challenges. Here, we start showcasing approaches to characterize surface reconstruction at the topmost surface layer, such as low-energy ion scattering (LEIS), discussing advantages and limitations. Next, we connect characterization of surface reconstruction to site-specific kinetic analysis, enabled via steady-state isotopic transient kinetic analysis (SSITKA), and we express our viewpoint on building structure–performance relationships by deeply understanding reconstructed surfaces. Later, we comment on the potential of tuning surface reconstruction to enhance catalytic performance. Finally, we explore the interplay between surface reconstruction and the “intelligent behavior”.

alcohol conversion↗

DOE OSTI2020

Nature of Reactive Hydrogen for Ammonia Synthesis over a Ru/C12A7 Electride Catalyst

Recently, there have been renewed interests in exploring new catalysts for ammonia synthesis under mild conditions. Electride-based catalysts are among the emerging ones. Ruthenium particles supported on an electride composed of a mixture of calcium and aluminum oxides (C12A7) have attracted great attention for ammonia synthesis due to their facile ability in activating N2 under ambient pressure. However, the exact nature of the reactive hydrogen species and the role of electride support still remain elusive for this catalytic system. Here, we report for the first time that the surface-adsorbed hydrogen, rather than the hydride encaged in the C12A7 electride, plays a major role in ammonia synthesis over the Ru/C12A7 electride catalyst with the aid of in situ neutron scattering techniques. Combining in situ neutron diffraction, inelastic neutron spectroscopy, density functional theory (DFT) calculation, and temperature-programmed reactions, the results provide direct evidence for not only the presence of encaged hydrides during ammonia synthesis but also the strong thermal and chemical stability of the hydride species in the Ru/C12A7 electride. Steady state isotopic transient kinetic analysis (SSITKA) of ammonia synthesis showed that the coverage of reactive intermediates increased significantly when the Ru particles were promoted by the electride form (coverage up to 84%) of the C12A7 support rather than the oxide form (coverage up to 15%). Such a drastic change in the intermediate coverage on the Ru surface is attributed to the positive role of electride support where the H2 poisoning effect is absent during ammonia synthesis over Ru. The finding of this work has significant implications for understanding catalysis by electride-based materials for ammonia synthesis and hydrogenation reactions in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

CO 2 methanation reaction pathways over unpromoted and NaNO 3 -promoted Ru/Al 2 O 3 catalysts

Catalytic CO 2 sorbents, materials that adsorb and pre-concentrate CO 2 on the catalyst surface prior to subsequent conversion, are becoming important materials in CO 2 capture and utilization. In this work, a prototypical CO 2 methanation catalyst – Ru/Al 2 O 3 – and a related catalytic sorbent – NaNO 3 /Ru/Al 2 O 3 – are used for CO 2 methanation in flowing hydrogen in a fixed bed reactor at temperatures ranging from 220 to 280 °C. Activation energies for the NaNO 3 /Ru/Al 2 O 3 material are slightly higher than unpromoted Ru/Al 2 O 3 catalysts, and the reaction orders vary more significantly. In situ IR spectroscopy and steady-state isotopic kinetic analysis (SSITKA) using in situ IR/MS spectroscopy show that bicarbonate and linear carbonyl species are the likely reaction intermediates over unpromoted Ru/Al 2 O 3 , while bidentate carbonate, formate and linear carbonyl species are among likely reaction intermediates over NaNO 3 /Ru/Al 2 O 3 . Rate laws consistent with the obtained experimental data are proposed after kinetic modeling of multiple plausible reaction pathways. In conclusion, results suggest that the pathway over the NaNO 3 /Ru/Al 2 O 3 catalyst likely has an additional kinetically relevant irreversible step in the CO 2 methanation reaction pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Case Study: Calorimetry

This chapter presents the use of adsorption microcalorimetry to study acid-base catalysis over mixed metal oxides. Understanding the acid-base properties of catalysts is of paramount importance for steering product selectivity in a wide variety of catalytic industrial processes. In particular, catalytic conversion of biomass into biofuels and chemicals demands comprehensive understanding of the acid-base properties of the catalyst to selectively convert functional groups. Herein, the use of probe molecules to measure the strength and density of acid and basic sites on mixed metal oxide surfaces is introduced. Further, the challenges when characterizing mixed metal oxides, presenting surface reconstruction, are explained. An example displays how combining adsorption calorimetry with ab initio calculations explains the activation of a reactant on the surface of a mixed metal oxide. Acid-base catalysis over nanoshapes is studied to unveil that different nanoshapes lead to different extents of surface reconstruction, which ultimately affect acid-base catalysis. The use of steady-state isotopic transient kinetic analysis (SSITKA), in combination with adsorption microcalorimetry, unveils that surface reconstruction of a set of perovskites impacts the density of active sites to a greater extent than the intrinsic reactivity of the active site. At the end of this chapter, fundamental insights into catalyst transient behavior during isomerization of n-butane, and the reaction mechanism for conversion of 4-methylpentan-2-ol, are presented.

Polo Garzon, Felipe↗

DOE OSTI2023

Tracing the transient reaction kinetics of adsorbed species by in situ/operando infrared spectroscopy

The dynamic reaction behavior (i.e., transient responses) of IR-observable adsorbed species and gaseous products obtained from transient kinetic studies provide valuable kinetic and mechanistic information, namely: the abundance of active intermediates and their reactivity distribution, the chemical structure of IR-observable active and spectator species, the sequence of their formation, and the kinetically significant and rate-determining step under reaction conditions of practical catalysis. We discuss the use of transient response data to elucidate the reaction mechanisms of several gas-solid reactions: CO/H 2 , CO/H 2 /C 2 H 4 , photocatalytic oxidation of ethanol, and the CO 2 -amine reaction. The IR coupled with transient kinetic techniques is especially useful for investigating the mechanisms of photocatalytic reactions because both photogenerated electrons and many adsorbed species are IR-active (exhibiting measurable IR bands), and their evolution occurs on a time scale of seconds at ambient temperature. We highlight the key features and limitations of in situ IR with transient kinetics, as well as their significance in catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Selective and Stable In-Promoted Fe Catalyst for Syngas Conversion to Light Olefins

A selective and stable alumina-supported In-promoted Fe catalyst (10 mol % In based on Fe) was discovered for converting syngas (2:1 H 2 /CO ratio) to olefins with high selectivity (45% with CO 2 included) and a remarkable stability (72 h run) at a CO conversion of 10% at 400 °C and 5 bar. The X-ray photoelectron spectroscopy results indicated that incorporating In into Fe catalysts changed the chemical bonding state of Fe and Fe/In composition near the surface layers, which affected the catalytic reactivity. Steady-state isotopic transient kinetic analysis showed that more stable CHx fragments are present on the catalyst surface when incorporating In into Fe, which can promote C–C coupling reaction toward olefins. Our study demonstrates that introducing In into Fe catalysts on Al 2 O 3 support can lower CO activation abilities. It has more impacts on lowering hydrogenation activity, which permits more C–C couplings and like of “ene” hydrogenation. Furthermore, weakening CO adsorption both in terms of sites and strength encouraged CO toward hydrocarbons rather than CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Mechanistic Insights on the Low-Temperature Oxidation of CO Catalyzed by Isolated Co Ions in N-Doped Carbon

Isolated cobalt ions on nitrogen-doped carbon (Co-N-C) catalyze CO oxidation at temperatures as low as 196 K, but the active site and mechanism for this reaction remain elusive. In this work, steady-state CO oxidation around 273 K over Co-N-C revealed nearly first order behavior in both CO and O 2 as well as a negative apparent activation energy. Isotopic transient analysis of the reaction confirmed a rapid turnover frequency and low surface coverage of adsorbed intermediates leading to CO 2 (< 10% of the Co). Results from kinetics experiments combined with quantum chemical calculations and molecular dynamics simulations are consistent with a reaction path involving weak adsorption of CO onto Co ions followed by a low barrier for the CO-assisted activation of weakly adsorbed O 2 . Furthermore, this proposed mechanism for dioxygen activation does not involve a redox cycle with the transition metal ion and may be important in other low temperature catalytic reactions involving O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

A self-adjusting platinum surface for acetone hydrogenation

We show that platinum displays a self-adjusting surface that is active for the hydrogenation of acetone over a wide range of reaction conditions. Reaction kinetics measurements under steady-state and transient conditions at temperatures near 350 K, electronic structure calculations employing density-functional theory, and microkinetic modeling were employed to study this behavior over supported platinum catalysts. The importance of surface coverage effects was highlighted by evaluating the transient response of isopropanol formation following either removal of the reactant ketone from the feed, or its substitution with a similarly structured species. The extent to which adsorbed intermediates that lead to the formation of isopropanol were removed from the catalytic surface was observed to be higher following ketone substitution in comparison to its removal, indicating that surface species leading to isopropanol become more strongly adsorbed on the surface as the coverage decreases during the desorption experiment. This phenomenon occurs as a result of adsorbate–adsorbate repulsive interactions on the catalyst surface which adjust with respect to the reaction conditions. Reaction kinetics parameters obtained experimentally were in agreement with those predicted by microkinetic modeling when the binding energies, activation energies, and entropies of adsorbed species and transition states were expressed as a function of surface coverage of the most abundant surface intermediate (MASI, C 3 H 6 OH*). It is important that these effects of surface coverage be incorporated dynamically in the microkinetic model (e.g., using the Bragg–Williams approximation) to describe the experimental data over a wide range of acetone partial pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗