SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
U.s. standard atmosphere, 1962 - properties, development of gravity and geopotential, systematic variation
The U.S. Standard Atmosphere, 1975 (COESA, 1975) is an idealized, steady-state representation of the earth's atmosphere from the surface of the earth to 1000-km altitude, as it is assumed to exist in a period of moderate solar activity. From 0 to 86 km, the atmospheric model is specified in terms of the hydrostatic equilibrium of a perfect gas, with that portion of the model from 0 to 51 geopotential kilometers being identical with that of the U.S. Standard Atmosphere, 1962 (COESA, 1962). Between 51 and 86 km, the defining temperature-height profile has been modified from that of the 1962 Standard to lower temperatures between 51 and 69.33 km, and to greater values between 69.33 and 86 km. Above 86 km, the model is defined in terms of quasi-dynamic considerations involving the vertical component of the flux of molecules of individual gas species. These conditions lead to the generation of independent number-density distributions of the major species, N2, O2, O, Ar, Ne, and H, consistent with observations. The detailed definitions of the model are presented along with graphs and abbreviated tables of the atmospheric properties of the 1975 Standard.
The 1976 U.S. Standard Atmosphere, representing a mid-latitude atmosphere for moderate solar activity, is compared to earlier standards. For heights of 51 km and below, this standard is identical with its immediate predecessor, the 1962 U.S. Standard Atmosphere. When the density-height profile of each of five earlier model atmospheres is compared with that of the 1976 standard, an oscillation of this parameter around the currently accepted average value is observed, which is partly the result of true density changes related to the 11-year cycle of solar activity and partly the result of earlier uncertainties. The development of knowledge is also elucidated by comparing the temperature-height profiles of each of the important standards used during the preceding century. Number densities of each of six atmospheric species computed for the 1976 U.S. standard are compared over the height region of 0 to 1000 km.
U.S. Standard Atmosphere supplements, 1966
U.S. Standard Atmosphere Supplements, 1966, containing tables and models depicting conditions other than mid-latitude mean
During 1925 the assumption of an isothermal atmosphere which was in general use as the standard for the calibration of altimeters in the United States was replaced by a standard atmosphere which assumes an altitude-temperature relation closely corresponding to the average of upper air observations at latitude 40 degrees in this country. The same standard atmosphere had already been adopted somewhat earlier in the United States as the aircraft performance standard. National Advisory Committee for Aeronautics Technical Reports nos. 147 and 218 give necessary constants, tables, and information. However, neither of these reports includes all of the tables required for the computation of actual altitudes nor those readily suitable for use in calibrating altimeters, since the altitude intervals for which data are given are not sufficiently small. The present report has been prepared specifically for these purposes. The formulas which define the standard atmosphere are given in this report, together with other formulas giving the corrections to be applied to the standard altitude in order to obtain the actual altitude when the necessary observations of pressure and temperature are available. The tables necessary for the use of this standard atmosphere in calibrating altimeters and in computing altitudes form the principal part of this report. An example of the computation of actual altitudes from observed pressures and temperatures are given in table IV.
Climate models often rely on standard atmospheres to represent various regions; these broadly capture the important physical and radiative characteristics of regional atmospheres, and become benchmarks for simulations by researchers. The high Antarctic plateau is a significant region of the earth for which such standard atmospheres are as yet unavailable. Moreover, representative profiles from atmospheres over other regions of the planet, including &om the northern high latitudes, are not comparable to the atmosphere over the Antarctic plateau, and are therefore only of limited value as substitutes in climate models. Using data from radiosondes, ozonesondes and satellites along with other observations from South Pole station, typical seasonal atmospheric profiles for the high plateau are compiled. Proper representations of rapidly changing ozone concentrations (during the ozone hole) and the effect of surface elevation on tropospheric temperatures are discussed. The differences between standard profiles developed here and the most similar standard atmosphere that already exists - namely, the Arctic Winter profile - suggest that these new profiles will be extremely useful to make accurate representations of the atmosphere over the high plateau.
Description of the 1962 revised u.s. standard atmosphere
A detailed table of the standard equilibrium velocity and standard equilibrium time is presented for bodies falling in the standard atmosphere. This table gives the velocity at various altitudes and the time of fall from sea level to -4000 feet and from 80,000 feet to sea level. In addition to this standard table, there are given short tables and charts of an open-parachute descent and free-falls; the terminal velocity at sea level, and the variation of the weight-to-drag ratio (2w/cds)1/2 for various weight jumpers from 90 to 30 feet in open-parachute descent; and estimations of drag coefficients of silk and nylon parachutes. The table of standard equilibrium velocities and standard equilibrium times may be used directly for open-parachute descents, given the weight of the jumper, the diameter of the parachute, and the drag coefficient. For free-falls starting from horizontal flight, approximately 14 seconds must be added to the equilibrium time given in the table to obtain the total time to sea level. (author)
This paper describes the development of standard and reference atmosphere models along with the history of their origin and use since the mid 19th century. The first "Standard Atmospheres" were established by international agreement in the 1920's. Later some countries, notably the United States, also developed and published "Standard Atmospheres". The term "Reference Atmospheres" is used to identify atmosphere models for specific geographical locations. Range Reference Atmosphere Models developed first during the 1960's are examples of these descriptions of the atmosphere. This paper discusses the various models, scopes, applications and limitations relative to use in aerospace industry activities.
Report includes calculated detailed tables of pressures and densities of a standard atmosphere in both metric and english units for altitudes from -5,000 meters to 20,000 meters and from -16,500 feet to 65,800 feet. Tables, figures, physical constants, and basic equations are based upon the text, reproduced herein, of the manual of the ICAO standard atmosphere, International Civil Aviation Organization (ICAO) draft of December 1952. (author)
A computer version of the U.S. Standard Atmosphere, 1976, was developed. The computer program was developed in modular form for easy incorporation into the user's program and for easy modification for specialized uses.
A mid-latitude northern hemisphere model of the daytime ozone distribution in the troposphere, stratosphere, and lower mesosphere has been constructed. Data from rocket soundings in the latitude range of 45 deg N + or - 15 deg N, results of balloon soundings at latitudes from 41 to 47 deg N, and latitude gradients from satellite ozone observations have been combined to produce estimates of the annual mean ozone concentration and its variability at heights up to 74 km for an effective latitude of 45 deg N. This model is a revision for heights above 26 km of the tentative mid-latitude ozone model, included in the U.S. Standard Atmosphere Supplements, 1966, and has been adopted for use in the U.S. Standard Atmosphere, 1976.
Comparison of U.S. standard and Patrick reference atmospheric density data
This report is a revision of the altitude pressure tables of the United States standard atmosphere given in Technical Report No. 246. The altitude range has been extended from 50,000 to 80,000 feet.
This paper describes a new framework for the simulation of aircraft flyover noise through a non-standard atmosphere. Central to the framework is a ray-tracing algorithm which defines multiple curved propagation paths, if the atmosphere allows, between the moving source and listener. Because each path has a different emission angle, synthesis of the sound at the source must be performed independently for each path. The time delay, spreading loss and absorption (ground and atmosphere) are integrated along each path, and applied to each synthesized aircraft noise source to simulate a flyover. A final step assigns each resulting signal to its corresponding receiver angle for the simulation of a flyover in a virtual reality environment. Spectrograms of the results from a straight path and a curved path modeling assumption are shown. When the aircraft is at close range, the straight path results are valid. Differences appear especially when the source is relatively far away at shallow elevation angles. These differences, however, are not significant in common sound metrics. While the framework used in this work performs off-line processing, it is conducive to real-time implementation.
The research activities are reported of the committee for the extension to the U.S. Standard Atmosphere in the region from 80 to 200 km. Discussions include: lower boundary condition, philosophy and constraints of the model, and atmospheric composition.