Search NASA⌕ Search

SEARCH · Search NASA

Results for “STOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A Flight Investigation of the STOL Characteristics of an Augmented Jet Flap STOL Research Aircraft

The flight test program objectives are: (1) To determine the in-flight aerodynamic, performance, and handling qualities of a jet STOL aircraft incorporating the augmented jet flap concept; (2) to compare the results obtained in flight with characteristics predicted from wind tunnel and simulator test results; (3) to contribute to the development of criteria for design and operation of jet STOL transport aircraft; and (4) to provide a jet STOL transport aircraft for STOL systems research and development. Results obtained during the first 8 months of proof-of-concept flight testing of the aircraft in STOL configurations are reported. Included are a brief description of the aircraft, fan-jet engines, and systems; a discussion of the aerodynamic, stability and control, and STOL performance; and pilot opinion of the handling qualities and operational characteristics.

Quigley, H. C.↗

Energy impact of short-haul STOL systems

An analysis has been made to evaluate the impact on fuel requirements of a segregated short-haul system. A comparison has been made between two alternate scenarios: one with STOL, and the other without STOL. For the New York to Washington, D.C. city pair the results show: (1) the modal efficiency approach, while indicating the with STOL scenario requires more fuel than the without STOL scenario, is of questionable validity because it does not account for various effects which exist in realistic scenarios; (2) evaluation of fuel requirements based on more detailed modeling indicates that while a STOL scenario requires more fuel than without STOL when an idealized CTOL system is postulated, the STOL scenario requires less fuel than without STOL when the CTOL system has even moderate delays. These results are due to a combination of effects: the closer and more convenient locations of STOL ports to the traveler, congestion at the CTOL airports, and the impact of the through passenger traffic. Sensitivity of results to STOL aircraft block fuel and to CTOL congestion delays are considered.

Stewart, E. C.↗

Effectiveness evaluation of STOL transport operations

A short-takeoff and landing (STOL) systems simulation model has been developed and implemented in a computer code (known as STOL OPS) which permits evaluation of the operation of a STOL aircraft and its avionics in a commercial airline operating environment. STOL OPS concentrated on the avionics functions of navigation, guidance, control, communication, hazard aviodance, and systems management. External world factors influencing the operation of the STOL aircraft include each airport and its geometry, air traffic at each airport, air traffic control equipment and procedures, weather (including winds and visibility), and the flight path between each airport served by the route. The development of the STOL OPS program provides NASA a set of computer programs which can be used for detailed analysis of a STOL aircraft and its avionics and permit establishment of system requirements as a function of airline mission performance goals.

Hitt, E. F.↗

Simulation studies of STOL airplane operations in metropolitan downtown and airport air traffic control environments

The operating problems and equipment requirements for STOL airplanes in terminal area operations in simulated air traffic control (ATC) environments were studied. These studies consisted of Instrument Flight Rules (IFR) arrivals and departures in the New York area to and from a downtown STOL port, STOL runways at John F. Kennedy International Airport, or STOL runways at a hypothetical international airport. The studies were accomplished in real time by using a STOL airplane flight simulator. An experimental powered lift STOL airplane and two in-service airplanes having high aerodynamic lift (i.e., STOL) capability were used in the simulations.

Sawyer, R. H.↗

Flight-test of the glide-slope track and flare-control laws for an automatic landing system for a powered-lift STOL airplane

An automatic landing system was developed for the Augmentor Wing Jet STOL Research Airplane to establish the feasibility and examine the operating characteristics of a powered-lift STOL transport flying a steep, microwave landing system (MLS) glide slope to automatically land on a STOL port. The flight test results address the longitudinal aspects of automatic powered lift STOL airplane operation including glide slope tracking on the backside of the power curve, flare, and touchdown. Three different autoland control laws were evaluated to demonstrate the tradeoff between control complexity and the resulting performance. The flight test and simulation methodology used in developing conventional jet transport systems was applied to the powered-lift STOL airplane. The results obtained suggest that an automatic landing system for a powered-lift STOL airplane operating into an MLS-equipped STOL port is feasible. However, the airplane must be provided with a means of rapidly regulation lift to satisfactorily provide the glide slope tracking and control of touchdown sink rate needed for automatic landings.

Watson, D. M.↗

Integration of STOL airplanes into the ATC system

The study involving the STOL airplane and air traffic control is a joint NASA/FAA effort designed to examine the effects of introducing large numbers of STOL airplanes into a high-density terminal area. Simply stated, the objectives of the study are to determine the effects of the STOL airplane on the air traffic control (ATC) system and to determine the effects of the ATC system on the STOL airplane. More specifically, the study seeks to determine the airspace requirements and air traffic control equipment and handling techniques required to accommodate the STOL airplane in the ATC system and the design characteristics, avionics equipment, and flight procedures required to operate the STOL airplane in the air traffic control system.

Peterson, P.↗

A method of wind shear detection for powered-lift STOL aircraft

A new wind shear warning system for powered-lift STOL aircraft was evaluated by using a flight simulator. Wind shear warning systems for CTOL aircraft have been designed to detect horizontal shear only. Because the approach air speed of STOL aircraft is lower than that for CTOL aircraft, STOL aircraft are more vulnerable to vertical wind due to (1) a gradient of horizontal shear that is smaller for STOL than for CTOL aircraft because of slower airspeed; (2) STOL aircraft spend longer time in a downdraft; and (3) vertical wind causes a more radical change in the STOL aircraft's flight path because of its lower airspeed. In order to detect the vertical wind, the wind shear warning system proposed calculates the difference between potential flight path measured on-board during shear traversal and trimmed flight path estimated from aircraft status. The most characteristic feature of this new system is that it utilizes only inertial information and pitot-static airspeed data; this yields a convenient means of on-board implementation. Simulation test results confirm that the new system can detect the vertical shear.

Funabiki, Kohei↗

Preliminary results of flight tests of the augmentor-wing jet STOL research aircraft

The Augmentor-Wing Jet STOL Research Aircraft has been developed and has started flight tests. The objectives of the program are to compare aerodynamic characteristics predicted from wind-tunnel data with data obtained in flight, to determine flight dynamic characteristics and limitations of the augmentor-wing concepts, and to contribute to the development of STOL design and operational criteria. Initial flight test results have shown that the aerodynamic characteristics are close to values predicted from wind-tunnel tests. The lateral-directional stability and control characteristics are satisfactory for research STOL missions with stability augmentation, but the longitudinal control require improvement. STOL take-off distance over 11 m is about 290 m, and landing approach speeds are between 60 and 65 knots. The investigation of the STOL operational and performance characteristics is continuing.

Quigley, H. C.↗

Quiet STOL propulsion session introductory remarks

Research activities, preliminary design activities, and system optimization studies in support of the development of advanced, quiet, STOL propulsion systems are discussed. Noise alleviation by means of controlling the source and by means of acoustical treatment receive considerable emphasis. A STOL airplane designed for a given payload has essentially double the installed thrust of a comparable CTOL airplane. Unless compensated for during the design process, this alone will tend to increase the source noise by 3 db. The propulsive lift introduces flap impingement noise or duct and flap scrubbing noise, noise sources not present in CTOL airplanes to any significant degree. These additional noise sources are illustrated. Depending on the specific configuration, this will tend to increase the noise by several db or more. Although the propulsive lift characteristics of STOL airplanes will tend to increase source noise significantly, the proximity of STOL airfields to populated areas leads to STOL noise objectives considerably lower than those currently applicable to CTOL airplanes.

Schroeder, R. W.↗

Landing rates for mixed STOL and CTOL traffic

A study was made to determine the expected landing rate for STOL-only traffic and mixed STOL-CTOL traffic. The conditions used vary from present day standards to an optimistic estimate of possible 1985 conditions. A computer program was used to determine the maximum landing rate for the specified conditions and aircraft mix. The results show that the addition of STOL on a CTOL runway increases the total landing rate if the STOL airborne spacing can be reduced by use of improved navigation equipment. Further, if both takeoff and landings are performed on the same runway, the addition of STOL traffic will allow an increase in the total operation rate, even with existing spacing requirements.

White, J. S.↗

An economic assessment of STOL aircraft potential including terminal area environmental considerations, volume 1

The results of an economic and environmental study of short haul airline systems using short takeoff and landing (STOL) aircraft are presented. The STOL system characteristics were optimized for maximum patronage at a specified return on investment, while maintaining noise impact compatibility with the terminal area. Supporting studies of aircraft air pollution and hub airport congestion relief were also performed. The STOL concept specified for this study was an Augmentor Wing turbofan aircraft having a field length capability of 2,000 ft. and an effective perceived noise level of 95 EPNdB at 500 ft. sideline distance. An economic and environmental assessment of the defined STOL system and a summary of the methodology, STOL system characteristics and arena characteristics are provided.

Solomon, H. L.↗

Terminal-area STOL operating systems experiments program

Information which will aid in the choice by the U.S. Government and industry of system concepts, design criteria, operating procedures for STOL aircraft and STOL ports, STOL landing guidance systems, air traffic control systems, and airborne avionics and flight control systems. Ames has developed a terminal-area STOL operating systems experiments program which is a part of the joint DOT/NASA effort is discussed. The Ames operating systems experiments program, its objectives, the program approach, the program schedule, typical experiments, the research facilities to be used, and the program status are described.

Smith, D. W.↗

Study of quiet turbofan STOL aircraft for short-haul transportation. Volume 2: Aircraft

A study of the quiet turbofan STOL aircraft for short haul transportation was conducted. The objectives of the study were as follows: (1) to determine the relationships between STOL characteristics and economic and social viability of short haul air transportation, (2) to identify critical technology problems involving introduction of STOL short haul systems, (3) to define representative aircraft configurations, characteristics, and costs, and (4) to identify high payoff technology areas to improve STOL systems. The analyses of the aircraft designs which were generated to fulfill the objectives are summarized. The baseline aircraft characteristics are documented and significant trade studies are presented.

Source record↗

Study of quiet turbofan STOL aircraft for short-haul transportation. Volume 4: Markets

A marketing study to determine the acceptance and utilization of a STOL aircraft short-haul air transportation system was conducted. The relationship between STOL characteristics and the economic and social viability of STOL as a short-haul reliever system was examined. A study flow chart was prepared to show the city pair and traffic split analysis. The national demand for STOL aircraft, as well as the foreign and military markets, were analyzed.

Source record↗

Program plan to develop airworthiness standards for STOL aircraft

A program plan to develop criteria for airworthiness standards for STOL transport aircraft is presented. Initially, three different STOL concepts are to be examined with a goal to arrive at a generalized set of standards. The Breguet 941 deflected-slipstream STOL has been initially evaluated on a piloted motion simulator and in flight. Confidence in establishing criteria for airworthiness standards for STOL transport aircraft has been obtained from these studies.

Cayot, J. E.↗

STOL aircraft flight and landing area considerations.

One proposed solution to the total short-haul transportation system problem is to use existing low-wing-loading turbopropeller STOL aircraft. Deflected slipstream turboprop aircraft have also been considered for early STOL service. Aspects of current aircraft research are discussed together with the NASA research aircraft, field length and aircraft performance considerations, crosswind landings, crosswind reducing fences, elevated STOL ports, a guaranteed friction STOL runway, and problems of runway containment.

Riebe, J. M.↗