Loads on bodies in wakes.
Loads on bodies in wakes resulting from crossflow at submerged body or from wake translation over submerged body, noting dynamic instability
AERODYNAMIC LOAD↗
SEARCH · Search NASA
Results for “SUBMERGED BODY”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Loads on bodies in wakes.
Loads on bodies in wakes resulting from crossflow at submerged body or from wake translation over submerged body, noting dynamic instability
AERODYNAMIC LOAD↗
Lagrangian Modeling and Simulation of the Free Surface-Affected Dynamics of Underwater Vehicles
The paper deals with the development of a novelsimulator for underwater vehicles that takes into account theinteraction between the submerged body and the free watersurface. By using a Lagrangian approach, the potential flowtheory is combined with the 6-DoF equations of motions, inorder to derive a mathematical model of the system dynamics tobe solved in time-domain. A numerical model is then specificallydeveloped and an extensive simulation campaign was carried out,leading to the Submerged Bodies Simulator (SubBoS). The resultshighlight an extension of the prediction validity with respect tothe state-of-art modeling, typically based on stringent hypotheseson body motion (e.g. small displacements, pure surge motion).Index Terms—Lagrangian dynamics, modeling, simulation,potential theory, naval architecture.
Quadrelli, Marco B.↗
Unsteady panel method for flows with multiple bodies moving along various paths
A potential flow based three-dimensional panel method was modified to treat time dependent conditions in which several submerged bodies can move within the fluid along different trajectories. This modification was accomplished by formulating the momentary solution in an inertial frame-of-reference, attached to the undisturbed stationary fluid. Consequently, the numerical interpretation of the multiple-body, solid-surface boundary condition and the viscous wake rollup was considerably simplified. The unsteady capability of this code was validated by comparing computed and experimental results for a finite wing undergoing pitch oscillations. In order to demonstrate the multicomponent capability, computations were made for two wings following closely intersecting paths (e.g., to avoid mid air collisions) and for a flow field with relative rotation (e.g., helicopter-rotor/fuselage interaction). Results were compared to experimental data when such data was available.
Richason, Thomas F.↗
Unsteady panel method for flows with multiple bodies moving along various paths
A potential flow based three-dimensional panel method was modified to treat time-dependent conditions in which several submerged bodies can move within the fluid along different trajectories. This modification was accomplished by formulating the momentary solution in an inertial frame of reference, attached to the undisturbed stationary fluid. Consequently, the numerical interpretation of the multiple-body, solid-surface boundary condition and the viscous wake rollup was considerably simplified. The usteady capability of this code was calibrated and validated by comparing computed results with closed-form analytical results available for an airfoil, which was impulsively set into a constant speed forward motion. To demonstrate the multicomponent capability, computations were made for two wings following closely intersecting paths (i.e., simulations aimed at avoiding mid-air collisions) and for a flowfield with relative rotation (i.e., the case of a helicopter rotor rotating relative to the fuselage). Computed results for the cases were compared to experimental data, when such data was available.
Richardson, Thomas F.↗
Flow of rarefied gases over two-dimensional bodies
A kinetic-theory analysis is made of the flow of rarefied gases over two-dimensional bodies of arbitrary curvature. The Boltzmann equation simplified by a model collision integral is written in an arbitrary orthogonal curvilinear coordinate system, and solved by means of finite-difference approximation with the discrete ordinate method. A numerical code is developed which can be applied to any two-dimensional submerged body of arbitrary curvature for the flow regimes from free-molecular to slip at transonic Mach numbers. Predictions are made for the case of a right circular cylinder.
Jeng, Duen-Ren↗
Optimum power analysis of a self-reactive wave energy point absorber with mechanically-driven power take-offs
This paper studies a self-reactive ocean wave energy converter (WEC) where energy is absorbed through the relative motion between a floating buoy on the ocean surface and a submerged body. Two types of direct-drive power take off (PTO) systems are examined. One adopts a ball screw system in inverse driving mode with mechanical motion rectifier (MMR) that converts the oscillating bi-directional input heave motion into unidirectional rotation to drive an electromagnetic generator, and another one uses a ball screw system to directly drive the generator (called non-MMR). Dynamic models for both types of PTOs are established and integrated with the overall WEC system model in both the time and frequency domains. Numerical simulation is used to investigate the dynamic performance of both PTOs. The influences of the PTO inerter, which is from the rotational inertia of the flywheel and generator, and the WEC drag damping coefficient are discussed and explored. The analytical closed-form solution for the optimum condition of the non-MMR system is derived based on the criterion of maximum power absorption, and numerical simulation yields the optimum condition for the MMR system. Overall, the results under regular and irregular waves show that the PTO inerter in the MMR system can improve the power absorption for small wave periods and maintain the same performance for large wave periods. The PTO inerter in the non-MMR system shifts the peak frequency. The WEC drag damping negatively influences the power absorption in both PTO systems, especially at large wave periods.
16 TIDAL AND WAVE POWER↗
Experiments in oceanographic aerospace photography - Ben Franklin spectral filter tests
Aerial multispectral sensing test on submerged body in ocean
Jensen, R. C.↗
Development of an unsteady water tunnel.
A detailed description is given of an unsteady hydrodynamic flow facility located at the University of Alabama in Huntsville, Alabama. This facility is used to measure unsteady pressures and forces and to acquire hydrogen bubble flow visualization data pertaining to bodies submerged in different types of accelerating flow. Various data acquisition systems are delineated along with typical experimental results acquired using cylindrical models. The method of facility operation and theoretical design considerations are shown along with a comparison between calculations and experimental results. This comparison indicates that the theoretical design procedures sufficiently represented the physical phenomenon for facility design.
Schutzenhofer, L.↗
Numerical Modelling of a Two-Body Point Absorber Featuring Variable Geometry
This work presents a novel wave energy converter (WEC) device concept that incorporates variable geometry modules into a two-body point absorber type WEC. The variable geometry modules consist of air inflatable bags in the surface float and a water inflatable ring in the reaction body. The variable geometry floats are able to provide greater control over the device hydrodynamics; they can be inflated or deflated to emphasize either power absorption or load shedding. The device geometry is controlled in a quasi-static fashion, while the power take-off (PTO) unit is controlled on a wave-to-wave timescale. The surface float is tethered directly to the submerged reaction body through PTO tether lines. A linear time-domain analysis, conducted using open-source Wave Energy Converter (WEC-Sim) software, was used to estimate the absorbed power of the WEC in sea states defined by the Wave Energy Prize. WEC power performance was weighted against the expected capital cost of building the load bearing structure of the device, providing an estimated ACE value. The inclusion of the variable geometry modules was shown to be effective in altering the device geometry to improve power capture with a near proportional increase in expected costs, providing a nearly constant power-to-cost ratio.
cost of energy↗
Advanced Remotely Operated Vehicle for Education and Research
Disclosed are watercrafts with rotatable air propulsion steering units and retractable measurement instruments. The watercraft can include a substantially flat bottom, a top deck, a rotatable air propulsion steering unit configured to propel the watercraft and to rotate in order to steer the watercraft when the watercraft is submerged in a liquid body without requiring a submerged rudder steering system under the substantially flat bottom. The watercraft can also include a retractable measurement deck configured to alternatively raise measurement instruments above the liquid body and lower into the liquid body.
Miles, Ted K.↗
Performance analysis and tank test validation of a hybrid ocean wave-current energy converter with a single power takeoff
This paper introduces a hybrid ocean wave-current energy converter (HWCEC) that harvests energy from ocean waves and current simultaneously with a single power takeoff (PTO). Specifically, the wave energy is extracted through relative heaving motion between a floating buoy and a submerged second body, while the current energy is extracted using a marine current turbine (MCT). Energy from both sources are integrated by a hybrid PTO whose concept is based on a mechanical motion rectifier (MMR). The hybrid PTO with two one-way clutches converts bidirectional, up-and-down motion from the waves into unidirectional rotation of the generator. Meanwhile a third one-way clutch couples the MCT with the same generator. The wave and current can simultaneously or separately drive the same generator through different engagement and disengagement statuses of the one-way clutches. Time-domain simulation is conducted with hydrodynamic coefficients obtained from computational fluid dynamics analysis and boundary element method. Tank tests were conducted for a HWCEC under co-existing wave and current inputs. For comparison, separate baseline tests of a turbine and a two-body point absorber, each acting in isolation, are conducted. Experimental results validate the dynamic modeling and show that a HWCEC can increase the output power with a range between 29-87% over either current turbine and wave energy converter acting individually, and it can reduce by up to 70% the peak-to-average power ratio compared with the wave energy converter on the tested conditions.
16 TIDAL AND WAVE POWER↗
Investigation of a submerged nozzle on a 1/14.2-scale model of the 260-inch solid rocket
Flow characteristics about submerged rocket nozzle model immersed in simulated exhaust gas
SUBMERGED BODY↗
CalWave - Reports and Plans for xWave Device Demonstration at PacWave South Site
CalWave has developed a submerged pressure differential type Wave Energy Converter (WEC) architecture called xWave. The single body device oscillates submerged, is positively buoyant, and taut moored to the sea floor and integrates novel features such as absorber submergence depth control. Since participation in the US Wave Energy Prize, CalWave has evolved the design and successfully concluded a scaled 10-month open ocean pilot. CalWave recently concluded the final design phase of a scaled up WEC version for PacWave and started component order/build of the WEC towards the grid-connected demonstration at PacWave. Documentation and data here includes: a system certification plan, a risk registry in the form of an FMECA (Failure Mode, Effects, and Criticality Analysis) table, an updated LCOE content model, a report on performance metrics, and a risk management plan.
16 TIDAL AND WAVE POWER↗
Pressure and Force Characteristics at Transonic Speeds of a Submerged Divergent-walled Air Inlet on a Body of Revolution
Explore the source record for details and available documents.
Braden, John A↗
Zero-lift Drag of a Large Fuselage Cavity and a Partially Submerged Store on a 52.5 Degree Sweptback-wing - Body Configuration as Determined from Free-flight Tests at Mach Numbers of 0.7 to 1.53
Explore the source record for details and available documents.
Hoffman, Sherwood↗
Debris/ice/TPS assessment and integrated photographic analysis for Shuttle Mission STS-62
A pre-launch debris inspection of the pad and Shuttle vehicle was conducted on 2 March 1994. The detailed walkdown of Launch Pad 39B and MLP-1 also included the primary flight elements OV-102 Columbia (16th flight), ET-62 (LWT 55), and BI-064 SRB's. There were no significant facility or vehicle anomalies. After the launch on March 4th, a debris inspection of Pad 39B was performed. Damage to the pad overall was minimal. On-orbit photographs taken by the flight crew and two films from the ET/ORB umbilical cameras of the External Tank after separation from the Orbiter revealed no major damage or lost flight hardware that would have been a safety of flight concern. Orbiter performance on final approach appeared normal. Infrared imagery of landing gear deployment showed the loss of thermal barrier from the nose gear wheel well. The missing thermal barrier material was not recovered. The Solid Rocket Boosters were inspected at Hanger AF after retrieval. Both frustums had a combined total of 44 MSA-2 debonds over fasteners. Significant amounts of BTA had been applied to closeouts on the RH frustum, forward skirt, and aft skirt. Hypalon paint was blistered/missing over the areas were the BTA had been applied. The underlying BTA was not sooted (IFA STS-62-B-1). Investigation of this condition has concluded there was insufficient heat rates to cause blistering of the Hypalon until late in the ascent phase. A post landing inspection of OV-102 was conducted after the landing at KSC. The Orbiter TPS sustained a total of 97 hits, of which 16 had a major dimension of 1 inch or larger. The Orbiter lower surface had a total of 36 hits, of which 7 had a major dimension of 1 inch or larger. Based on these numbers and comparison to statistics from previous missions of similar configuration, both the total number of debris hits and the number of hits 1 inch or larger was less than average. Six thermal barriers, total size approximately 36 in. x 3 in. x 1.5 in., and one corner tile piece 4 in. x 4 in., were missing from the nose landing gear doors. Runway infrared cameras recorded these objects falling from the Orbiter when the nose landing gear doors were opened on final approach. A search of the area under the flight path failed to recover the missing thermal batteries, which may be submerged in the large body of water south of the runway. The cause for the loss of the material was attributed to the way the substrate was prepared for bonding at the vendor. Orbiter post landing microchemical sample results revealed a variety of residuals in the Orbiter window samples. These were attributed to SRB BSM exhaust, Orbiter TPS, window protective covers and processing, natural landing site products, and paints/primers from various sources. The residual sampling data do not indicate a single source of damaging debris and all of these materials have been documented previously in analyses for post landing sample reports. Data from residual sampling also showed no trends when compared to previous mission data. A total of ten Post Launch Anomalies, including one IFA, were observed during the STS-62 mission assessment.
Katnik, Gregory N.↗
Ram-recovery Characteristics of NACA Submerged Inlets at High Subsonic Speeds
Results are presented of an experimental investigation of the characteristics of NACA submerged inlets on a model of a fighter airplane for Mach numbers from 0.30 to 0.875. The effects on the ram-recovery ratio at the inlets of Mach number, angle of attack, boundary-layer thickness on the fuselage, inlet location, and boundary-layer deflectors are shown. The data indicate only a slight decrease in ram-recovery ratio for the inlets ahead of or just behind the wing leading edge as Mach number increased, but showed large decreases at high Mach numbers for the inlets aft of the point of maximum thickness of the wing.
INLETS, SIDE - DUCTED BODIES↗