SEARCH · Search NASA
Results for “SUGAR CANE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
IMPROVED BIOREFINERY FOR THE PRODUCTION OF ETHANOL, CHEMICALS, ANIMAL FEED AND BIOMATERIALS FROM SUGAR CANE
The Audubon Sugar Institute (ASI) of Louisiana State University’s Agricultural Center (LSU AgCenter) and MBI International (MBI) sought to develop technologies that will lead to the development of a sugar-cane biorefinery, capable of supplying fuel ethanol from bagasse. Technology development focused on the conversion of bagasse, cane-leaf matter (CLM) and molasses into high value-added products that included ethanol, specialty chemicals, biomaterials and animal feed; i.e. a sugar cane-based biorefinery. The key to lignocellulosic biomass utilization is an economically feasible method (pretreatment) for separating the cellulose and the hemicellulose from the physical protection provided by lignin. An effective pretreatment disrupts physical barriers, cellulose crystallinity, and the association of lignin and hemicellulose with cellulose so that hydrolytic enzymes can access the biomass macrostructure (Teymouri et al. 2004, Laureano-Perez, 2005). We chose to focus on alkaline pretreatment methods for, and in particular, the Ammonia Fiber Expansion (AFEX) process owned by MBI. During the first two years of this program a laboratory process was established for the pretreatment of bagasse and CLM using the AFEX process. There was significant improvement of both rate and yield of glucose and xylose upon enzymatic hydrolysis of AFEX-treated bagasse and CLM compared with untreated material. Because of reactor size limitation, several other alkaline pretreatment methods were also co-investigated. They included, dilute ammonia, lime and hydroxy-hypochlorite treatments. Scale-up focused on using a dilute ammonia process as a substitute for AFEX, allowing development at a larger scale. The pretreatment of bagasse by an ammonia process, followed by saccharification and fermentation produced ethanol from bagasse. Simultaneous saccharification and fermentation (SSF) allowed two operations in the same vessel. The addition of sugarcane molasses to the hydrolysate/fermentation process yielded improvements beyond what was expected solely from the addition of sugar. In order to expand the economic potential for building a biorefinery, the conversion of enzyme hydrolysates of AFEX-treated bagasse to succinic acid was also investigated. This program established a solid basis for pre-treatment of bagasse in a manner that is feasible for producing ethanol at raw sugar mills.
Dosimetric evaluation of sucrose and granulated cane sugar in the therapeutic dose range
Granulated cane sugar has been used as a dosimetric material to report dose in high dose accidental irradiations. The purpose of this study was to assess whether clinical dosimetry is also plausible with such a commonly available material. The behavior of cane sugar was explored with respect to therapeutically relevant radiation quantities (dose, dose rate) and qualities (energy, radiation type) as well as under different temperature conditions. The stability of the signal postirradiation was also measured. Absorbed dose was measured by spectrophotometric readout of a ferrous ammonium sulfate xylenol orange (FX)-sugar solution in 10 cm path length cells. A visible color change was produced as a function of dose when the irradiated sugar samples were dissolved in FX solution (10% dilution by mass). A comparison of the optical absorbance spectra and dose response of cane sugar with analytical grade sucrose was done to establish a benchmark standard from which subsequent dosimetry measurements can be validated. The response of the sugar dosimeter read at 590 nm was found to be linear over the dose range of 100-2000 cGy, independent of energy (6-18 MV) and of the average dose rate (100-500 cGy/min). The readout of sugar samples irradiated with mixed photon and electron fields was also shown to be independent of radiation type (photons and electrons). Sugar temperature (20-40 degree sign C) during irradiation did not affect dose estimates, making it a promising dosimeter for in vivo dosimetry, particularly in cases where the dosimeter must remain in contact with the patient for an extended period of time. Sugar can be used as an integrating dosimeter, since it exhibits no fractionation effects. Granulated cane sugar is cost effective, safe, soft tissue equivalent, and can be used under various experimental conditions, making it a suitable dosimeter for some radiotherapy applications.
AmeriFlux FLUXNET-1F CR-Fsc Filadelfia sugar cane cropland
This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site CR-Fsc Filadelfia sugar cane cropland. This is the FLUXNET version of the carbon flux data for the site CR-Fsc Filadelfia sugar cane cropland produced by applying the standard ONEFlux (1F) software. Site Description - The research site is located in a sugar cane cropland generally harvested in December. Sugarcane is irrigated(furrow irrigation) sporadically only during the dry season (January-April).Crop height varies from 0m to 4m.
AmeriFlux CR-Fsc Filadelfia sugar cane cropland
This is the AmeriFlux version of the carbon flux data for the site CR-Fsc Filadelfia sugar cane cropland. Site Description - The research site is located in a sugar cane cropland generally harvested in December. Sugarcane is irrigated(furrow irrigation) sporadically only during the dry season (January-April).Crop height varies from 0m to 4m.
Multiscale Alterations in Sugar Cane Bagasse and Straw Submitted to Alkaline Deacetylation
Alkaline deacetylation has emerged as a promising chemistry for pretreatments performed prior to enzymatic saccharification of lignocellulosic biomass. This process avoids complex pressurized reactors and opens new opportunities for lignin covalorization. In this work, we evaluate the chemical and morphological response of sugar cane bagasse and straw submitted to alkaline treatments. Alkaline solutions for deacetylation (0.4% w/w NaOH, 70 degrees C, 3 h) as well as proximal conditions (0.1-0.7% NaOH, 55-85 degrees C, 1-5 h) chosen by 23 experimental design were evaluated. The deacetylation treatment removes ~90% of the acetyl groups and 20-30% of the lignin from both bagasse and straw, while removal of ~20% of the xylan and glucan is observed in straw, but not in bagasse. Considering nanoscale structural alterations, neither cellulose cocrystallization (evaluated by X-ray diffraction) nor formation of lignin aggregates (evaluated by thermoporometric signature) are observed after the alkaline conditions, in contrast to observations after hydrothermal treatments. Furthermore, calorimetric thermoporometry as well as scanning and transmission electron microscopies show substantial introduction of nanoscale porosity and loosening of the tissue and cell wall structures, indicating desirable mechanical weakening and gains in enzyme accessibility. These results provide fundamental and practical knowledge for biorefineries based on alkaline deacetylation of sugar cane bagasse and straw.
Characterization of a wollastonite glass-ceramic material prepared using sugar cane bagasse ash (SCBA) as one of the raw materials
Glass-ceramic material prepared with sugar cane bagasse ash as one of the raw materials was characterized to determine some important properties for its application as a coating material. X-ray diffraction patterns showed that wollastonite-2M (CaSiO{sub 3}) was the major glass-ceramic phase. The Rietveld method was used to quantify the crystalline (60 wt.%) and vitreous (40 wt.%) phases in the glass-ceramic. The microstructure (determined by scanning electron microscopy) of this material had a marble appearance, showing a microporous network of elongated crystals with some areas with dendritic, feather-like ordering. Microhardness data gave a mean hardness value of 564.4 HV (Vickers-hardness), and light microscopy disclosed a greenish brown colored material with a vitreous luster. - Highlights: • We studied the properties of a glass-ceramic material obtained from sugarcane ash. • This material has the appearance and hardness of natural stones. • A refining method gave information about its amorphous and crystalline phases. • This material has potential to be used as coating plates for buildings.
Preliminary statistical studies concerning the Campos RJ sugar cane area, using LANDSAT imagery and aerial photographs
The two phase sampling technique was applied to estimate the area cultivated with sugar cane in an approximately 984 sq km pilot region of Campos. Correlation between existing aerial photography and LANDSAT data was used. The two phase sampling technique corresponded to 99.6% of the results obtained by aerial photography, taken as ground truth. This estimate has a standard deviation of 225 ha, which constitutes a coefficient of variation of 0.6%.
Estimation of the sugar cane cultivated area from LANDSAT images using the two phase sampling method
A two phase sampling method and the optimal sampling segment dimensions for the estimation of sugar cane cultivated area were developed. This technique employs visual interpretations of LANDSAT images and panchromatic aerial photographs considered as the ground truth. The estimates, as a mean value of 100 simulated samples, represent 99.3% of the true value with a CV of approximately 1%; the relative efficiency of the two phase design was 157% when compared with a one phase aerial photographs sample.
Effect of Protic Ionic Liquids in Sugar Cane Bagasse Pretreatment for Lignin Valorization and Ethanol Production
Ionic liquids have been called designer solvents because it is possible to fine-tune their properties from a huge range of possible combinations of cations and anions. In this work, we evaluate the potential of protic ionic liquids (PILs) in the fractionation of sugar cane bagasse in a biorefinery context. Here, the PILs were designed to selectively solubilize lignin and leave a polysaccharides solid fraction. The carbohydrate fraction was further hydrolyzed to obtain pentose and hexose sugars, which were fermented using a pentose-consuming yeast. The results have shown that, differently from pretreatments that solubilize hemicelluloses, pentoses could be fermented together with hexoses without a prior detoxification step with high yield and productivity. The lignin recovered was characterized by 2D HSQC NMR, 31 P NMR, and GPC, showing that the design of the PIL influences lignin characteristics, but pretreatment temperature and time do not. The lignins obtained are sulfur-free, and the richness of their functional groups makes them attractive for conversion into a diversity of value-added products, which can make a biorefinery based on the proposed process viable.
Short term responses of nitrogen trace gas emissions to nitrogen fertilization in tropical sugar cane: Variations due to soils and management practices
Nitrogen (N) fertilization of agricultural systems is thought to be a major source of the increase in atmospheric N2O; NO emissions from soils have also been shown to increase due to N fertilization. While N fertilizer use is increasing rapidly in the developing world and in the tropics, nearly all of our information on gas emissions is derived from studies of temperate zone agriculture. Using chambers, we measured fluxes of N2O and NO following urea fertilization in tropical sugar cane systems growing on a variety of soil types in the Hawaiian Islands, USA. On the island of Maui, where urea is applied in irrigation lines and soils are mollisols and inceptisols, N2O fluxes were elevated for a week or less following fertilization; maximum average fluxes were typically less than 30 ng cm(exp -2)/ h. NO fluxes were often an order of magnitude less than N2O. Together, N2O and NO represented from 0.01 - 0.5% of the applied N. In fields on the island of Hawaii, where urea is broadcast on the surface and soils are andisols, N2O fluxes were similar in magnitude to Maui but remained elevated for much longer periods after fertilization. NO emissions were 2-5 times higher than N2O through most of the sampling periods. Together the gases loss represented approximately 1. 1 - 3% of the applied N. Laboratory studies indicate that denitrification is a critical source of N2O in Maui, but that nitrification is more important in Hawaii. Experimental studies suggest that differences in the pattern of N2O/NO and the processes producing them are a result of both carbon availability and placement of fertilizer, and that the more information-intensive fertilizer management practice results in lower emissions.
Life Cycle Greenhouse Gas Emissions of Brazilian Sugar Cane Ethanol Evaluated with the GREET Model Using Data Submitted to RenovaBio
Not Available
Use of LANDSAT data to identify and evaluate areas of sugar cane
There are no author-identified significant results in this report.
Use of LANDSAT data for estimating the area of sugar cane in the state of Sao Paulo
There are no author-identified significant results in this report.
Utilization of LANDSAT data to inventory the sugar cane in the state of Sao Paulo
There are no author-identified significant results in this report.
An evaluation of 70mm color infrared photography for sugar cane rust assessment in the Dominican Republic
Explore the source record for details and available documents.
Louisiana Air Quality - Using ASTER, Landsat 5, and MODIS to Assess the Impact of Sugar Cane and Marsh Burning Practices on Local Air Quality
Biomass burning is an event that occurs globally and encompasses both human-initiated and naturally-occurring fires. It is estimated that 3 billion metric tons of biomass are burned every year worldwide (Curtis 2002). Societies have used these burning techniques for cooking and heating, clearing land for agricultural use, and removing excess biomass from grazing and croplands (Levine 1991). Our study focuses on the state of Louisiana and its commonly occurring methods of sugarcane and marsh biomass burning (LSU Ag.Center 2000; Nyman and Chabreck 1995). Over the centuries, the sugarcane industry in this state has steadily grown to surpass all other agriculture commodities. To promote efficiency within this large industry, burning excess biomass takes place throughout the harvesting period (LSU Ag.Center 2000). In addition to sugarcane, Louisiana contains 30% of the total coastal marsh of the United States (LSU Ag.Center 2000). The periodic burning of such marshes is an ecologically important management tool that is practiced throughout the Atlantic and Gulf Coasts (Nyman and Chabreck 1995). In most biomass burning instances, the leading by-product is particulate matter that is less than 10 microns in diameter (PM10). Through past research, this fine material has been shown to have negative health effects on surrounding populations (Boopathy2001). While burning guidelines have been set into place by the Louisiana Department of Agriculture and Forestry (LDAF) to reduce health effects, the guidelines are voluntary (LDAF 2000). To help quantify emission estimates, we will focus on Iberia Parish for sugarcane burning and Cameron Parish for marsh burning. Through analysis of ASTER, Landsat 5 TM, and MODIS data, our goal is to determine the amount and location of land area burned for the years 2008 and 2009 due to these practices. With emissions algorithms from Seiler and Crutzen, 1980, total acreage burned can be used to estimate emissions. This information will help to document the impact of these smoke plumes on local populations for the improvement of biomass burning policies in Louisiana.
Bioaccessible Arsenic in Soils of Former Sugar Cane Plantations, Island of Hawaii
Abstract Not Provided