Search NASA⌕ Search

SEARCH · Search NASA

Results for “SULFUR OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Aerobic sulfur-oxidizing bacteria: Environmental selection and diversification

Sulfur-oxidizing bacteria oxidize reduced inorganic compounds to sulfuric acid. Lithotrophic sulfur oxidizer use the energy obtained from oxidation for microbial growth. Heterotrophic sulfur oxidizers obtain energy from the oxidation of organic compounds. In sulfur-oxidizing mixotrophs energy are derived either from the oxidation of inorganic or organic compounds. Sulfur-oxidizing bacteria are usually located within the sulfide/oxygen interfaces of springs, sediments, soil microenvironments, and the hypolimnion. Colonization of the interface is necessary since sulfide auto-oxidizes and because both oxygen and sulfide are needed for growth. The environmental stresses associated with the colonization of these interfaces resulted in the evolution of morphologically diverse and unique aerobic sulfur oxidizers.

Caldwell, D.↗

Dispersion of sulfur creates a valuable new growth medium formulation that enables earlier sulfur oxidation in relation to iron oxidation in Acidithiobacillus ferrooxidans cultures

Abstract Acidithiobacillus ferrooxidans is an acidophilic chemolithoautotroph that is commonly reported to exhibit diauxic population growth behavior where ferrous iron is oxidized before elemental sulfur when both are available, despite the higher energy content of sulfur. We have discovered sulfur dispersion formulations that enables sulfur oxidation before ferrous iron oxidation. The oxidation of dispersed sulfur can lower the culture pH within days below the range where aerobic ferrous iron oxidation can occur. Thus, ferric iron reduction can be observed quickly which had previously been reported over extended incubation periods with untreated sulfur. Therefore, we demonstrate that this substrate utilization pattern is strongly dependent on the cell loading in relation to sulfur concentration, sulfur surface hydrophobicity, and the pH of the culture. Our dispersed sulfur formulation, lig‐sulfur, can be used to support the rapid antibiotic selection of plasmid‐transformed cells, which is not possible in liquid cultures where ferrous iron is the main source of energy for these acidophiles. Furthermore, we find that media containing lig‐sulfur supports higher production of green fluorescent protein compared to media containing ferrous iron. The use of dispersed sulfur is a valuable new tool for the development of engineered A. ferrooxidans strains and it provides a new method to control iron and sulfur oxidation behaviors.

Inaba, Yuta↗

Reverse dissimilatory sulfite reductase as phylogenetic marker for a subgroup of sulfur-oxidizing prokaryotes

Sulfur-oxidizing prokaryotes (SOP) catalyse a central step in the global S-cycle and are of major functional importance for a variety of natural and engineered systems, but our knowledge on their actual diversity and environmental distribution patterns is still rather limited. In this study we developed a specific PCR assay for the detection of dsrAB that encode the reversely operating sirohaem dissimilatory sulfite reductase (rDSR) and are present in many but not all published genomes of SOP. The PCR assay was used to screen 42 strains of SOP (most without published genome sequence) representing the recognized diversity of this guild. For 13 of these strains dsrAB was detected and the respective PCR product was sequenced. Interestingly, most dsrAB-encoding SOP are capable of forming sulfur storage compounds. Phylogenetic analysis demonstrated largely congruent rDSR and 16S rRNA consensus tree topologies, indicating that lateral transfer events did not play an important role in the evolutionary history of known rDSR. Thus, this enzyme represents a suitable phylogenetic marker for diversity analyses of sulfur storage compound-exploiting SOP in the environment. The potential of this new functional gene approach was demonstrated by comparative sequence analyses of all dsrAB present in published metagenomes and by applying it for a SOP census in selected marine worms and an alkaline lake sediment.

59 BASIC BIOLOGICAL SCIENCES↗

Sulfur Oxidation and Contrail Precursor Chemistry

Sulfuric acid (H2SO4), formed in commercial aircraft operations via fuel-S (goes to) SO2 (goes to) SO3 (goes to) H2SO4 plays an important role in the formation of contrails. It is believed that the first step occurs inside the combustor, the second step in the engine exit nozzle, and the third step in the exhaust plume. Thus, measurements of the sulfur oxidation rates are critical to the understanding of contrail formation. Field measurements of contrails formed behind commercial aircraft indicate that significantly greater conversion of fuel-bound sulfur to sulfate aerosol occurs than can be explained by our current knowledge of contrail physics and chemistry. The conversion of sulfur from S(IV) to S(VI) oxidation state, required for sulfate aerosol formation, is thermodynamically favored for the conditions that exist within jet engines but is kinetically disfavored. The principal reaction pathway is O+SO2+M (goes to) SO3+M. The rates of this reaction have never been measured in the temperature and pressure regimes available to aircraft operation. In the first year (FY02) of this project, we performed a series of experiments to elucidate the rate information for the O+SO2+M (goes to) SO3+M reaction. The work performed is described following the proposed work plan. Because we used the H2/O2 system for an O-atom source and rate coefficients were obtained via computer simulation, construction of a reaction mechanism and either recalculation or estimation of thermodynamic properties of H(x)SO(y) species are described first.

DeWitt, Kenneth J.↗

Sulfur Oxidation and Contrail Precursor Chemistry

Sulfuric acid (H2SO4), formed in commercial aircraft operations via Fuel-S (right arrow) SO2 + SO3 (right arrow) H2SO4, plays an important role in affecting the global climate change through atmospheric chemical reactions and radiative forcing. Measurement of the sulfur oxidation rates is critical to the understanding of the contrail formation. The principle reaction pathway is SO2 + O + M (right arrow) SO3 + M. Although there are many measurements for the rates of this reaction, it has never been measured in the temperature and pressure regime available to aircraft operation. In this investigation, a series of experiments were performed behind the reflected shock waves in a shock tube. OH radicals were produced in lean, shock heated SO2/H2/O2/Ar mixtures. The reaction progress was followed using OH absorption spectroscopy at 310 nm. The data were analyzed with the aid of computer modeling/simulation. The mean value of the rate coefficients of R21 determined is k(sub 21,0)/[M]= 3.9 x 10(exp 15) cm(sup 6) per square mole per second at T = 960 - 1150 K and rho = 16-30 micromole per cubic centimeter with uncertainty limits of plus or minus 30%. A non-Arrhenius fit to our data together with all existing data gives k(sub 21,0)/[M] = 1.3 x 10(exp 24) T (exp -2.5) exp(-2350 K/T) cm(sup 6) per square mole per second at T = 300 - 2500 K with the same uncertainty limits given above. The calculated conversion of S(IV)(SO2) to S(VI) (SO3 + H2SO4) was about 2% in our experimental conditions.

DeWitt, Kenneth↗

Oxidized Sulfur Species in Slab Fluids as a Source of Enriched Sulfur Isotope Signatures in Arcs

Recycling of oxidized sulfur from subducting slabs to the mantle wedge provides simultaneous explanations for the elevated oxygen fugacity (fO 2 ) in subduction zones, their high hydrothermal and magmatic sulfur outputs, and the enriched sulfur isotopic signatures (i.e., δ 34 S > 0‰) of these outputs. However, a quantitative understanding of the abundance and speciation of sulfur in slab fluids consistent with high pressure experiments is lacking. Here we analyze published experimental data for anhydrite solubility in H 2 O-NaCl solutions to calibrate a high-pressure aqueous speciation model of sulfur within the framework of the deep earth water model. We characterize aqueous complexes, required to account for the high experimental anhydrite solubilities. We then use this framework to predict the speciation and solubility of sulfur in chemically complex fluids in equilibrium with model subducting mafic and ultramafic lithologies, from 2 to 3 GPa and 400 to 800°C at log fO 2 from FMQ-2 to FMQ+4. We show that sulfate complexes of calcium and sodium markedly enhance the stability of sulfate in moderately oxidized fluids in equilibrium with pyrite at fO 2 conditions of FMQ+1 to +2, causing large sulfur isotope fractionations up to 10‰ in the fluid relative to the slab. Such fluids could impart oxidized, sulfur-rich and high δ 34 S signatures to the mantle wedge that are ultimately transferred to arc magmas, without the need to invoke 34 S-rich subducted lithologies.

58 GEOSCIENCES↗

Sulfur oxidation to sulfate coupled with electron transfer to electrodes by Desulfuromonas strain TZ1

Microbial oxidation of elemental sulfur with an electrode serving as the electron acceptor is of interest because this may play an important role in the recovery of electrons from sulfidic wastes and for current production in marine benthic microbial fuel cells. Enrichments initiated with a marine sediment inoculum, with elemental sulfur as the electron donor and a positively poised (+300 mV versus Ag/AgCl) anode as the electron acceptor, yielded an anode biofilm with a diversity of micro-organisms, including Thiobacillus, Sulfurimonas, Pseudomonas, Clostridium and Desulfuromonas species. Further enrichment of the anode biofilm inoculum in medium with elemental sulfur as the electron donor and Fe(III) oxide as the electron acceptor, followed by isolation in solidified sulfur/Fe(III) medium yielded a strain of Desulfuromonas, designated strain TZ1. Strain TZ1 effectively oxidized elemental sulfur to sulfate with an anode serving as the sole electron acceptor, at rates faster than Desulfobulbus propionicus, the only other organism in pure culture previously shown to oxidize S with current production. The abundance of Desulfuromonas species enriched on the anodes of marine benthic fuel cells has previously been interpreted as acetate oxidation driving current production, but the results presented here suggest that sulfur-driven current production is a likely alternative.

Zhang, T↗

Partial genome sequence of Thioalkalivibrio thiocyanodenitrificans ARhD 1 T , a chemolithoautotrophic haloalkaliphilic sulfur-oxidizing bacterium capable of complete denitrification

Thioalkalivibrio thiocyanodenitrificans strain ARhD 1 T is a motile, Gram-negative bacterium isolated from soda lakes that belongs to the Gammaproteobacteria . It derives energy for growth and carbon fixation from the oxidation of sulfur compounds, most notably thiocyanate, and so is a chemolithoautotroph. It is capable of complete denitrification under anaerobic conditions. In addition, the draft genome sequence consists of 3,746,647 bp in 3 scaffolds, containing 3558 protein-coding and 121 RNA genes. T. thiocyanodenitrificans ARhD 1 T was sequenced as part of the DOE Joint Genome Institute Community Science Program.

59 BASIC BIOLOGICAL SCIENCES↗

Spectroscopic and Electronic Structure Study of ETHE1: Elucidating the Factors Influencing Sulfur Oxidation and Oxygenation in Mononuclear Nonheme Iron Enzymes

ETHE1 is a member of a growing subclass of nonheme Fe enzymes that catalyzes transformations of sulfur-containing substrates without a cofactor. ETHE1 dioxygenates glutathione persulfide (GSSH) to glutathione (GSH) and sulfite in a reaction which is similar to that of cysteine dioxygenase (CDO), but with monodentate (vs bidentate) substrate coordination and a 2-His/1-Asp (vs 3-His) ligand set. In this study, we demonstrate that GSS– binds directly to the iron active site, causing coordination unsaturation to prime the site for O 2 activation. Nitrosyl complexes without and with GSSH were generated and spectroscopically characterized as unreactive analogues for the invoked ferric superoxide intermediate. New spectral features from persulfide binding to the Fe III include the appearance of a low-energy Fe III ligand field transition, an energy shift of a NO– to Fe III CT transition, and two new GSS– to Fe III CT transitions. Time-dependent density functional theory calculations were used to simulate the experimental spectra to determine the persulfide orientation. Correlation of these spectral features with those of monodentate cysteine binding in isopenicillin N synthase (IPNS) shows that the persulfide is a poorer donor but still results in an equivalent frontier molecular orbital for reactivity. The ETHE1 persulfide dioxygenation reaction coordinate was calculated, and while the initial steps are similar to the reaction coordinate of CDO, an additional hydrolysis step is required in ETHE1 to break the S–S bond. Unlike ETHE1 and CDO, which both oxygenate sulfur, IPNS oxidizes sulfur through an initial H atom abstraction. Thus, factors that determine oxygenase vs oxidase reactivity were evaluated. In general, sulfur oxygenation is thermodynamically favored and has a lower barrier for reactivity. Furthermore, in IPNS, second-sphere residues in the active site pocket constrain the substrate, raising the barrier for sulfur oxygenation relative to oxidation via H atom abstraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complete genome sequence of Thioalkalivibrio paradoxus type strain ARh 1 T , an obligately chemolithoautotrophic haloalkaliphilic sulfur-oxidizing bacterium isolated from a Kenyan soda lake

Thioalkalivibrio paradoxus strain ARh 1 T is a chemolithoautotrophic, non-motile, Gram-negative bacterium belonging to the Gammaproteobacteria that was isolated from samples of haloalkaline soda lakes. It derives energy from the oxidation of reduced sulfur compounds and is notable for its ability to grow on thiocyanate as its sole source of electrons, sulfur and nitrogen. The full genome consists of 3,756,729 bp and comprises 3,500 protein-coding and 57 RNA-coding genes. Moreover, this organism was sequenced as part of the community science program at the DOE Joint Genome Institute.

59 BASIC BIOLOGICAL SCIENCES↗

An electrochemical investigation of interfacial electron uptake by the sulfur oxidizing bacterium Thioclava electrotropha ElOx9

Extracellular electron transfer (EET) allows microbes to acquire energy from solid state electron acceptors and donors, such as environmental minerals. Here, this process can also be harnessed at electrode interfaces in bioelectrochemical technologies including microbial fuel cells, microbial electrosynthesis, bioremediation, and wastewater treatment. Improving the performance of these technologies will benefit from a better fundamental understanding of EET in diverse microbial systems. While the mechanisms of outward (i.e. microbe-to-anode) EET is relatively well characterized, specifically in a few metal-reducing bacteria, the reverse process of inward EET from redox-active minerals or cathodes to bacteria remains poorly understood. This knowledge gap stems, at least partly, from the lack of well-established model organisms and general difficulties associated with laboratory studies in existing model systems. Recently, a sulfur oxidizing marine microbe, Thioclava electrotropha ElOx9, was demonstrated to perform electron uptake from cathodes. However, a detailed analysis of the electron uptake pathways has yet to be established, and electrochemical characterization has been limited to aerobic conditions. Here, we report a detailed amperometric and voltammetric characterization of ElOx9 cells coupling cathodic electron uptake to reduction of nitrate as the sole electron acceptor, even in the absence of any added inorganic carbon source. By comparing this cellular activity to spent media controls and using medium exchange experiments, we demonstrate that one of the pathways by which ElOx9 facilitates inward EET is by a direct-contact mechanism through a redox center with a formal potential of -94 mV vs SHE, rather than soluble intermediate electron carriers. In addition to the implications for understanding microbial sulfur oxidation in marine environments, this study highlights the potential for ElOx9 to serve as a convenient and readily culturable model organism for understanding the molecular mechanisms of inward EET.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetics of the sulfur oxidation on palladium: A combined in situ x-ray photoelectron spectroscopy and density-functional study

We studied the reaction kinetics of sulfur oxidation on the Pd(100) surface by in situ high resolution x-ray photoelectron spectroscopy and ab initio density functional calculations. Isothermal oxidation experiments were performed between 400 and 500 K for small amounts ({approx}0.02 ML) of preadsorbed sulfur, with oxygen in large excess. The main stable reaction intermediate found on the surface is SO{sub 4}, with SO{sub 2} and SO{sub 3} being only present in minor amounts. Density-functional calculations depict a reaction energy profile, which explains the sequential formation of SO{sub 2}, SO{sub 3}, and eventually SO{sub 4}, also highlighting that the in-plane formation of SO from S and O adatoms is the rate limiting step. From the experiments we determined the activation energy of the rate limiting step to be 85 {+-} 6 kJ mol{sup -1} by Arrhenius analysis, matching the calculated endothermicity of the SO formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Martian volatiles in shergottite EETA 79001 - New evidence from oxidized sulfur and sulfur-rich aluminosilicates

Two equivalent chips of lithology A (lith-A) and lithology C (lith-C) taken from the same interior portion of EETA 79001 shergottite have been analyzed for volatile species produced by high-vacuum pyrolysis. The lith-C was found to contain an oxidized sulfur component that does not occur in lith-A. The preterrestrial origin of this component in lith-C is supported by the occurrence in lith-C of sulfur- and chlorine-rich aluminosilicates that are not the same as Antarctic weathering products found in the control samples. The oxidation state and distribution of sulfur found in lith-C are consistent with the interpretation of EETA 79001 as a rock from Mars.

Gooding, J. L.↗

The Measurement of Sulfur Oxidation Products and Their Role in Homogeneous Nucleation

An improved version of a transverse ion source was developed which uses selected ion chemical ionization mass spectrometry techniques inside of a particle nucleation flow tube. These new techniques are very unique, in that the chemical ionization is done inside of the flow tube rather than by having to remove the compounds and clusters of interest which are lost on first contact,with any surfaces. The transverse source is also unique because it allows the ion reaction time to be varied over more than an order of magnitude, which in turn makes possible the separation of ion induced cluster growth from the charging of preexisting molecular clusters. As a result of combining these unique capabilities, the first ever measurements of prenucleation molecular clusters were performed. These clusters are the intermediate stage of growth in the gas-to-particle conversion process. This new technique provides a means of observing clusters containing 2, 3, 4, ... and up to about 8 sulfuric acid molecules, where the critical cluster size under these measurement conditions was about 4 or 5. Thus, the nucleation process can now be directly observed and even growth beyond the critical cluster size can be investigated. The details of this investigation are discussed in a recently submitted paper, which is included as Appendix A. Measurements of the diffusion coefficient of sulfuric acid and sulfuric acid clustered with a water molecule have also been performed. The measurements are also discussed in more detail in another recently submitted paper which is included as Appendix B. The empirical results discussed in both of these papers provide a critical test of present nucleation theories. They also provide new hope for resolving many of the huge discrepancies between field observation and model prediction of particle nucleation. The second part of the research conducted under this project was directed towards the development of new chemical ionization techniques for measuring sulfur oxidation products.

Eisele, F. L.↗

Elucidation of the mechanism for sulfur oxidation on Pt and Pt3Co electrocatalysts using in situ X-ray absorption spectroscopy

Adsorbed sulfur is a poison to the Pt catalysts used in proton exchange membrane fuel cells, but it can be removed by potential cycling. This process is studied for S{sub x}-poisoned nanoscale Pt- and Pt{sub 3}Co- on Vulcan carbon (Pt/VC and Pt{sub 3}Co/VC) in perchloric acid electrolyte using the {Delta}{mu} adsorbate isolation technique for in situ X-ray absorption spectroscopy. The {Delta}{mu} technique is modified to better distinguish the {Delta}{mu} signatures for H, O, and Sx on Pt. The resulting {Delta}{mu} analysis suggests that SO{sub 2} on nanoscale Pt is oxidized to bisulfate or sulfate species in two regions, near 1.05 V on the cluster edges of the Pt nanoparticle, and at higher potentials from the Pt(111) faces where oxygen is less strongly bound. The bisulfate or sulfate species desorb from the Pt surface at high potentials due to O(OH) adsorption/replacement and at low potentials due to loss of the Coulomb attraction between the bisulfate anion and the Pt. A similar oxidation process occurs for S{sub x}-poisoned Pt{sub 3}Co/VC, but at lower potentials because a ligand effect coming from Co shifts the oxidization potential of adsorbed SO{sub 2} to lower potentials while pushing OH adsorption to higher potentials. The spectroscopic results give insights into cyclic voltammetry data and are consistent with electrochemical cycling procedures for removing the sulfur.

30 DIRECT ENERGY CONVERSION↗

Resolving Sulfur Oxidation and Removal from Pt and Pt3Co Electrocatalysts Using in Situ X-ray Absorption Spectroscopy

Adsorbed sulfur is a poison to the Pt catalysts used in proton exchange membrane fuel cells, but it can be removed by potential cycling. This process is studied for S{sub x}-poisoned nanoscale Pt- and Pt{sub 3}Co- on Vulcan carbon (Pt/VC and Pt{sub 3}Co/VC) in perchloric acid electrolyte using the {Delta}{mu} adsorbate isolation technique for in situ X-ray absorption spectroscopy. The {Delta}{mu} technique is modified to better distinguish the {Delta}{mu} signatures for H, O, and Sx on Pt. The resulting {Delta}{mu} analysis suggests that SO{sub 2} on nanoscale Pt is oxidized to bisulfate or sulfate species in two regions, near 1.05 V on the cluster edges of the Pt nanoparticle, and at higher potentials from the Pt(111) faces where oxygen is less strongly bound. The bisulfate or sulfate species desorb from the Pt surface at high potentials due to O(OH) adsorption/replacement and at low potentials due to loss of the Coulomb attraction between the bisulfate anion and the Pt. A similar oxidation process occurs for S{sub x}-poisoned Pt{sub 3}Co/VC, but at lower potentials because a ligand effect coming from Co shifts the oxidization potential of adsorbed SO{sub 2} to lower potentials while pushing OH adsorption to higher potentials. The spectroscopic results give insights into cyclic voltammetry data and are consistent with electrochemical cycling procedures for removing the sulfur.

30 DIRECT ENERGY CONVERSION↗